Alçak yükleyici römork

Humbaur 4-Achs-Tieflader HTD 40K- mit Radmulden

HTD 40K-RM-BM_

Internal dimensions: approx. 9,220 mm x 2,540 mm
Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm
Permissible gross weight: 24,000 kg
Payload: approx. 14,000 kg
Tyres: 235/75R17.5 inches
Loading height: approx. 900 mm
Drawbar length: approx. 1,500 mm
Coupling height: approx. 820–1,000 mm
Ramp angle: approx. 10°
Ramp length: approx. 3,150 mm
Ramp width: approx. 750 mm
Permissible gross weight (special version): 40,000 kg
Payload (special version): approx. 30,000 kg
Low-bed length: approx. 6,610 mm
Overall dimensions (LxWxH): 11,200
Technical gross weight: approx. 44,000 kg
Technical axle load: approx. 11,000 kg
6 pairs of lashing points, 3,000 kg per lashing point
Lashing points in the outer frame of the low-bed
4 pairs of lashing points, 3,000 kg per lashing point
Lashing/stake pockets 3 t in the outer frame of the high-bed
1 pair of lashing points, 3,000 kg per lashing point
Lashing/stake pockets 3 t in the outer frame of the low-bed

Suspension:
Air suspension unit including lifting and lowering, acting on the rear axle group

Ijdpeiciutefx Aknjid
Brake system:
Brake system according to EC directives with EBS 4S/3M in multi-voltage version (12–24V), spring-loaded parking brake including 2 external test connections for brake/modulator and air bellows pressure

Electrics:
Lighting in LED version with flashing function for side marker lights, multi-voltage (12–24V)

Turntable:
Heavy-duty welded construction with low-maintenance ball bearing turntable

Towing device:
Cranked towing bar with 50 mm towing eye, low-maintenance silent bushings, including height adjustment for towing bar

Frame:
Heavy-duty welded construction made of high-strength fine-grained steel
Continuous cross members for maximum stability
Wheel recesses at the front (length at top approx. 2,500 mm, depth approx. 410 mm) and rear (length at top approx. 1,470 mm, depth approx. 370 mm); without wheel recess covers
Excavator trough (length 1,650 mm, width 750 mm, depth 190 mm)
Wheel cutouts over the rear wheels with wheelbase 2,010 mm, front corners chamfered
Rear climbing strips on the ramp slope for maximum safety during loading and unloading
4 pairs of stake pockets (90x50 mm) in the outer frame (high-bed)
1 pair of stake pockets (90x50 mm) in the outer frame (low-bed)

Floor:
50 mm softwood floor (painted/impregnated)

Ramps:
Single-piece hot-dip galvanized drive-on ramps (3,150 mm x 750 mm) with 50 mm softwood covering (painted/impregnated), laterally adjustable
Direct-acting standing spring lifters for easiest operation

Finishing:
Chassis frame hot-dip galvanized by immersion

Support:
2 folding supports at the rear, left and right at the vehicle rear

Equipment:
Folding side underrun protection
Front: semicircular plastic mudguards
Rear: straight steel mudguards with anti-spray
2 wheel chocks with holder
Contour marking in accordance with ECE Regulation R48

Wheel recess covers front:
With 3 pairs of stake pockets, without covering (covers retractable under the longitudinal members) 975.00888
Hardwood covering for front wheel recess cover
Wheel recess cover rear
With 1 pair of stake pockets, without covering (cover retractable under the longitudinal members) 975.00897
Hardwood covering for rear wheel recess cover
3 pairs of 6 t lashing rings, bolted
3 m equipment package without slope, B=11,200
Folding extension arms with softwood boards 970.04199-36
LED warning package HTD cranked Aspöck warning plates (4 pieces), electrics and revolving beacon
1 pair of stow

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.