Alçak şasi römorkMÜLLER-MITTELTAL
5 achs Tieflader, Nachlauflenkachse, MA liftbar
Alçak şasi römork
MÜLLER-MITTELTAL
5 achs Tieflader, Nachlauflenkachse, MA liftbar
Sabit fiyat KDV hariç
€99.000
(€117.810 brüt)
Üretim yılı
2026
Durumu
Yeni
Konum
Egestorf 

Resimleri göster
Haritayı göster
Temel veriler
Fiyat ve Konum
Sabit fiyat KDV hariç
€99.000
(€117.810 brüt)
- Satıcının konumu:
- Eichenstich 12, 21272 Egestorf, Almanya

Ara
Teknik detaylar
- Azami yük ağırlığı:
- 38.900 kg
- Toplam ağırlık:
- 50.000 kg
- Dingil konfigürasyonu:
- 3 aks
Teklif detayları
- Listeleme kimliği:
- A104-27-600
- Referans no.:
- 6179
- Son güncelleme tarihi:
- 17.02.2026
Açıklama
T5 Profile 50.0:
----Brakes:
* Wabco EBS (Electronic Braking System)
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
* 5 x 11 t Gigant axles
* 3rd axle liftable (ride height +30 mm when axle is lifted)
* Rear axle steering (lockable from the cab for maneuvering without truck-side installation; also lockable via switch on the trailer); lock must be deactivated before entering public roads
* Forced lifting and lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent control via EBS electronics
----Suspension:
* Air suspension, raising/lowering system with RtR valve
----Drawbar:
* Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment
----Electrics / Lighting:
* Smartboard as infotool with pressure sensors for total axle load display per axle group
* Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required)
* LED lighting system 12 / 24 V
* Removable rear LED beacon
----General Attachments:
* Mechanical warning sign package for 3 m overall width
* Toolbox made of galvanized steel, approx. 650 x 300 x 600 mm, mounted left side
* Plastic mudguards front axle, galvanized steel mud flaps rear axle
----Low Loader Platform:
* Turntable platform front extension with 45° corners and 3 storage compartments with lockable folding lids (opening rearwards)
* Low loader platform shortened by 500 mm to 6,280 mm including extended stepped drop by 500 mm forward
* Rubber coating on the folding frame, drive-on ramp, and walking area of the low loader platform
* Bamboo timber between longitudinal beams in front of excavator stick recess
----Load Securing (LaSi Package):
* 2 x 6.4 t lashing eyes front corners
* Sides, front and rear corners: 2 x 13.4 t UVV lashing rings each
* Sides: 5 x 10 t UVV lashing rings (swiveling, lowerable, loadable in all directions)
* Sides: 4 stake pockets, each with 2 t lashing capacity
* 1 x 16 t UVV lashing ring at rear cross member
----Widening:
* Extendable and folding outrigger extensions for 3 m total width (plank holders under the chassis, right side)
----Excavator Stick Recess:
* Continuous excavator stick recess with reinforcement profile from last axle to end cross member, approx. L=2,350 x W=770 x D=270 mm, 2 pairs of 6.4 t UVV lashing rings on the side in recess
----Ramps:
* Hydraulic folding ramp with dual-line hydraulics and fold-out tip, approx. 4,650 x 720 mm, incl. load holding valves and hydraulic side shift
----Rear Support:
* Hydraulic rear support
----Hydraulics:
* Hydraulic flow divider (for truck hydraulic pump output above 40 l/min up to max. 140 l/min)
----Loading Height:
* Loaded: 890 mm +/- 20 mm, adjustable via air suspension
----Platform Dimensions:
* Platform above turntable: 2,600 + 390 x 2,520 mm
* Lowbed platform: 6,280 + 500 x 2,520 mm, including 860 mm drive-on slope
----Paintwork:
* Chassis, turntable, drawbar, widening consoles, and ramps hot-dip galvanized
Kdjdpjl Tihuofx Ad Nei
* Drawbar forks, axles, hydraulic axle supports, and air tanks painted black
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
Available from CW (calendar week)
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
----Brakes:
* Wabco EBS (Electronic Braking System)
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
* 5 x 11 t Gigant axles
* 3rd axle liftable (ride height +30 mm when axle is lifted)
* Rear axle steering (lockable from the cab for maneuvering without truck-side installation; also lockable via switch on the trailer); lock must be deactivated before entering public roads
* Forced lifting and lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent control via EBS electronics
----Suspension:
* Air suspension, raising/lowering system with RtR valve
----Drawbar:
* Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment
----Electrics / Lighting:
* Smartboard as infotool with pressure sensors for total axle load display per axle group
* Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required)
* LED lighting system 12 / 24 V
* Removable rear LED beacon
----General Attachments:
* Mechanical warning sign package for 3 m overall width
* Toolbox made of galvanized steel, approx. 650 x 300 x 600 mm, mounted left side
* Plastic mudguards front axle, galvanized steel mud flaps rear axle
----Low Loader Platform:
* Turntable platform front extension with 45° corners and 3 storage compartments with lockable folding lids (opening rearwards)
* Low loader platform shortened by 500 mm to 6,280 mm including extended stepped drop by 500 mm forward
* Rubber coating on the folding frame, drive-on ramp, and walking area of the low loader platform
* Bamboo timber between longitudinal beams in front of excavator stick recess
----Load Securing (LaSi Package):
* 2 x 6.4 t lashing eyes front corners
* Sides, front and rear corners: 2 x 13.4 t UVV lashing rings each
* Sides: 5 x 10 t UVV lashing rings (swiveling, lowerable, loadable in all directions)
* Sides: 4 stake pockets, each with 2 t lashing capacity
* 1 x 16 t UVV lashing ring at rear cross member
----Widening:
* Extendable and folding outrigger extensions for 3 m total width (plank holders under the chassis, right side)
----Excavator Stick Recess:
* Continuous excavator stick recess with reinforcement profile from last axle to end cross member, approx. L=2,350 x W=770 x D=270 mm, 2 pairs of 6.4 t UVV lashing rings on the side in recess
----Ramps:
* Hydraulic folding ramp with dual-line hydraulics and fold-out tip, approx. 4,650 x 720 mm, incl. load holding valves and hydraulic side shift
----Rear Support:
* Hydraulic rear support
----Hydraulics:
* Hydraulic flow divider (for truck hydraulic pump output above 40 l/min up to max. 140 l/min)
----Loading Height:
* Loaded: 890 mm +/- 20 mm, adjustable via air suspension
----Platform Dimensions:
* Platform above turntable: 2,600 + 390 x 2,520 mm
* Lowbed platform: 6,280 + 500 x 2,520 mm, including 860 mm drive-on slope
----Paintwork:
* Chassis, turntable, drawbar, widening consoles, and ramps hot-dip galvanized
Kdjdpjl Tihuofx Ad Nei
* Drawbar forks, axles, hydraulic axle supports, and air tanks painted black
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
Available from CW (calendar week)
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2001
180 çevrimiçi ilan
İstek gönder
Telefon & Faks
+49 40 33... ilanlar
Bu ilanlar da ilginizi çekebilir.
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu römork
MÜLLER-MITTELTAL5 achs Tieflader, Nachlauflenkachse, MA liftbar
MÜLLER-MITTELTAL5 achs Tieflader, Nachlauflenkachse, MA liftbar
Küçük ilan
ANDELST
2.692 km
Kanca kol sistemi
VolvoFMX 430 6x4 VDL 21 Ton haakarmsysteem
VolvoFMX 430 6x4 VDL 21 Ton haakarmsysteem
Küçük ilan
Nürnberg
2.232 km
İnşaat makineleri için alçak yükleyici römorklar
Humbaur5-ACHS-TIEFLADER HTD 50 V49 Basic Plus
Humbaur5-ACHS-TIEFLADER HTD 50 V49 Basic Plus
Küçük ilan
Langelsheim
2.403 km
Römork
HüffermannHAR 20.67
HüffermannHAR 20.67
Küçük ilan
Köln
2.568 km
Kanca kasalı yük kamyonu (roll-off)
MERCEDES-BENZArocs 3345L 6x4 EURO6 HIAB Ultima 21S51 Abroller
MERCEDES-BENZArocs 3345L 6x4 EURO6 HIAB Ultima 21S51 Abroller
Küçük ilan
Legden
2.617 km
Kanca kasalı yük kamyonu (roll-off)
MERCEDES-BENZArocs 2646 mit HYVA 2047-S Abrollkipper *NEU*
MERCEDES-BENZArocs 2646 mit HYVA 2047-S Abrollkipper *NEU*
Küçük ilan
Koenigs-Wusterhausen
2.227 km
Üç taraflı damperli kamyon
MERCEDES-BENZAtego 1530 K 2-Achs Kipper Meiller
MERCEDES-BENZAtego 1530 K 2-Achs Kipper Meiller
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTALTridem, 7mtr., Nachlauf- Lenkachse, Liftbar
MÜLLER-MITTELTALTridem, 7mtr., Nachlauf- Lenkachse, Liftbar
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALTridem, 7mtr., Nachlauf- Lenkachse, Liftbar,
MÜLLER-MITTELTALTridem, 7mtr., Nachlauf- Lenkachse, Liftbar,
Küçük ilan
Dorsten
2.600 km
Roll-off dorse
HÜFFERMANNHAR 20.67 Abrollanhänger Doppelbereifung
HÜFFERMANNHAR 20.67 Abrollanhänger Doppelbereifung
İlanınız başarıyla silindi
Bir hata oluştu
















































































































































































































































