Çalışma platformlu römork

MÜLLER-MITTELTAL 5 achs Tieflader, Nachlauflenkachse, MA liftbar

Durumu: yeni, toplam ağırlık: 50.000 kg, azami yük ağırlığı: 38.900 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2025, * T5 Profile 50.0: * Wabco EBS (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake actuators * Drum brakes * 4 x 11-ton Gigant axles * Last axle is self-steering (Locking of the self-steering axle from the cab for maneuvering is possible without truck-side installation, and additionally via a switch on the trailer); the lock must be disengaged before driving on public roads * Air suspension with lift/lower system and RtR valve * 3rd axle liftable (ride height +30 mm when axle is lifted) * Forced unloading and forced lowering of the lift axle for maneuvering purposes (truck-side installation required), controlled depending on speed via the EBS electronics * Smartboard as info tool with pressure sensors for total axle load display by axle group * Tire pressure monitoring with truck cabin display option via EBS signal (without truck-side installation) * Mechanical warning sign kit for 3 m overall width * Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment * LED lighting system 12/24 V * Removable LED beacon at the rear * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, left side * Front fenders made of plastic, rear fender skirts made of galvanized sheet steel * Turntable platform front with 45° corners and 3 storage compartments with lockable folding lids (lids opening to rear) * Lowering of the low-bed platform by 500 mm to 6,280 mm incl. extended recessed neck 500 mm forward * Load securing package: 2 x 6.4 t lashing rings at the front corners, 2 x 13.4 t UVV-lashing rings at the front and rear side corners respectively, 5 x 10 t UVV-lashing rings each side (pivoting, lowering, multi-directional load capability), 4 stake pockets per side with simultaneous 2 t lashing capability, 1 x 16 t UVV-lashing ring on the rear cross member * Rubber covering on the folding ramp, driving slope and running surface of the low loader platform * Bamboo wooden insert between the side members in front of the excavator stick cradle * Extendable and foldable outriggers for 3 m overall width (plank holder under chassis, right side) * Continuous excavator stick cradle with reinforcement profile from last axle to end cross member approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV-lashing rings laterally in the excavator stick cradle * Hydraulic folding ramp with dual line hydraulics and extendable pointed section approx. 4,650 x 720 mm including load-holding valves and hydraulic lateral shift * Hydraulic rear support * Hydraulic flow divider (for hydraulic pump output on truck of over 40 l/min up to max. 140 l/min) * Loaded loading height 890 mm +/- 20 mm via air suspension * Loading area above turntable: 2,600 + 390 x 2,520 mm * Low-bed loading area: 6,280 + 500 x 2,520 mm, incl. 860 mm driving slope * Chassis, turntable, drawbar, extension brackets, and ramps hot-dip galvanized Itedpfxsl Tihue Aacsn * Drawbar, axles, hydraulic axle supports, and air tanks painted in black * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from calendar week 14/2026