Kullanılmış Feldbinder Diğer satın al (132)

Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı hacmi: 35 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.940 mm, Üretim yılı: 2026, Donanım: ABS, O.ME.P.S Silo Semi-Trailer----Model: CM 35 (Horizontal Silo) Axles and Suspension: Disc brakes 22.5", SAF axle assemblies 3x 9t with air suspension, axle spacing is 2 x 1310 mm, raising and lowering valve, loading pressure gauge mounted on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring, first axle liftable without tractor unit equipment, third axle liftable with Wabco Optiturn. Rims and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Ultra One aluminum rims, 11.75x22.5 ET120. Braking System: EBS 4S/2M WABCO compressed air brake system with RSS, compliant with standard 98/12/EC - ECE R13/09, brake pad wear indicator connected. Landing Gear: Mechanical landing gear with two speeds, 2x 20t load capacity with swing feet. Electrical System: All lighting in LED version, 24 Volt electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis support, yellow side marker lights in prescribed quantity, rear position lights, front marking lights, rear license plate lights, lamps according to 97/28/EC-2007/35/EC standard, two multi-chamber lights at the rear in aluminum brackets at the kingpin level per 97/28/EC-2007/35/EC, two rotating LED work lamps mounted top left and right on the tank, yellow warning beacon at the rear at hose pipe height, two reversing lamps in the underrun protection, two reversing lamps at the support height (each switchable on the control console). Tank Construction: A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-compartment tank with 35,000 liters capacity. Tank warranty: 24 months from delivery. King pin 2'' in accordance with 94/20/EC. Operating Parameters: Pressure vessel in accordance with the Pressure Equipment Directive PED 97/23/EC. Wall thickness approx. 5 mm. Test overpressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40° to +80° C. Filling Options: 3 manholes DN 450 with hinged and folding domed covers. Each dome cover is pressure tight with 4 wing nuts. Support for dome covers on top for stowage. Rain guard front closed, rear open. Dkjdox Nufyspfx Afmok Material Discharge: 2 material discharge cones with synthetic fabric aeration inserts. Individual discharge lines DN 100, steel, combined to the rear. 2 pinch valves DN 100 AKO in the pipelines. Final ball valve DN 100 with ring jet nozzle. Remote control for ball valve and Storz A coupling at the end of the discharge line. Air Piping: A 2.5'' stainless steel air manifold installed on the operator's side (RIGHT). Air line leads to the front, to the end of the silo, with check valve and connecting hose DN 65 for compressor with Storz-B coupling. Ball valves for upper air, auxiliary air, and aeration are on the air manifold. Upper air 2'' at the rear right. PRESSURE LINE INLET REAR RIGHT. External air connection Storz C at the air pipe at rear right. Pneumatic connection with air blow gun and coiled hose at the top walkway area by the access ladder. 1x vibrator on top of the tank. Air line top center on walkway for cleaning with air gun. Air line in lower stowage box for cleaning with air gun. Ladder and Access: 1 aluminum ladder mounted rear left on the vehicle, 1 pneumatic aluminum safety scissor railing with brake-actuated locking system, 1 aluminum ... (text ends here)

Durumu: yeni, yükleme alanı hacmi: 60 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.930 mm, Üretim yılı: 2026, Donanım: ABS, OMEPS Tipping Silo Trailer----Type: CR 60 Dsdpfx Aox Nugdjfmokk Chassis: Two fully automatically welded I-beam longitudinal members with welded crossmembers, chassis width of 1,400mm, 2" kingpin, tipping cylinder: Hyva Axles and Suspension: 22.5" disc brakes, SAF axle assemblies (3x 9t) with air suspension, axle spacing 2 x 1310 mm, lifting and lowering valve, load gauge on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn Rims and Tires: 6 wheels fitted with 385/65 R22.5 tires, as per manufacturer's choice, on Alcoa Dura Bright alloy rims, size 11.75x22.5 ET 120 Braking System: EBS 4S/2M WABCO compressed air braking system with RSS, in accordance with standard 98/12/CE - ECE R13/09; brake wear indicators connected Landing Legs: Mechanical landing legs with two speeds, 2x 20t load capacity with swivelling feet, rear crank support legs Electrical System: All lights are LED versions, 24V electrical installation comprised of: one 15-pin socket mounted in front of the saddle plate on the chassis rail, yellow side marker lights in required quantity, rear position lights, front marker lights, rear license plate lights, lighting as per 97/28/CE-2007/35/CE standard, 2 multi-chamber rear lights on aluminum brackets at the rotary bearing as per 97/28/CE-2007/35/CE standard, 1 LED work lamp on the tank, yellow warning beacon at the rear, installed at hose pipe height, 2x reversing lights in underrun protection, 2x reversing lights at the height of the supports (each can be deactivated at the power console) Tank Design: Horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-compartment tank, 60,000 liters capacity, tank warranty: 24 months from delivery Operating Parameters: Pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° Filling Options: 5 manholes DN 450 with pivoting and folding domed covers. Each dome cover sealed pressure-tight with 4 wing nuts, rubber support for dome cover storage above, front rain gutter closed, rear open Material Discharge: 1 material outlet cone DN 800 made of stainless steel (INOX), foldable with INOX disc for loosening, discharge cone swingable to the side, shut-off valve DN 150 with white gasket, connection: STORZ-A Air Piping: One 2.5" stainless steel air distribution main installed on the operating (right) side, one 4" stainless steel air distribution pipe mounted at the rear of the tank, air valves (shut-off valves) in INOX, top air hose and air connection hoses with 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1m in front of the rotary bearing Ladder and Walkway: 1 aluminum ladder installed at the rear left of the vehicle, 1 aluminum safety scissor guardrail which can be erected from below with a separate folding ladder section, fixed with park brake when open, 1 aluminum safety walkway runs along the top left of the tank, anti-slip coating on the tank Discharge Hose Storage: 4 hose tube containers, 5 m long, DN 200 made of aluminum, with 4 hoses DN 100 and STORZ couplings, hose container for compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum version

Durumu: yeni, toplam genişlik: 2.550 mm, toplam yükseklik: 3.960 mm, Üretim yılı: 2026, Donanım: ABS, O.ME.P.S Tipping Silo Semi-Trailer----Type: CR 47 Chassis: Two fully automatically welded I-beam longitudinal members with welded cross members, chassis width 1,400 mm, 2" king pin Tipping cylinder: Hyva Axles and Suspension: 22.5" disc brakes, 3x 9t SAF axle assemblies with air suspension, axle spacing 2 x 1,310 mm, raise and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn Rims and Tires: 6 wheels with tires size 385/65 R22.5, manufacturer's choice on Alcoa Dura-Bright aluminum rims in 11.75x22.5 ET 120 Braking System: EBS 4S/2M WABCO air brake system with RSS, according to standard 98/12/CE – ECE R13/09, brake pad wear indicator connected Landing Gears: Mechanical landing gears with two speeds, 2x 20t support load with swiveling foot, rear without support Electrical System: All lights in LED version, 24-volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis rail, yellow side marker lights in the required number, rear position lights, front clearance lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lights fitted at the pivot height in aluminum brackets according to 97/28/CE-2007/35/CE, 1 LED work light on the tank, yellow warning light at the rear mounted at hose tube height, 2x reversing lights in the underrun protection, 2x reversing lights at support height (each switchable on the power console) Tank Version: Dsdpfxex Nuftj Afmskk One horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), single-chamber tank with 47,000-liter capacity, tank warranty: 24 months from delivery Operating parameters: Pressure tank according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar – operating pressure 2.0 bar, operating temperature -40°C to +80°C Filling Options: 4 manholes DN 450 with pivoting and foldable dome covers. The dome covers are sealed pressure-tight with 4 wing nuts each, rubber support for dome covers on top for storage, rain cover closed at the front-open at the rear Material Outlet: 1 material discharge cone DN 800 made from INOX, foldable with INOX disc for loosening, material discharge cone laterally pivoting, DN 150 shut-off valve with white gasket, connection: STORZ-A Air Piping: A 2.5" stainless steel air manifold mounted on the right operation side, a 4" stainless steel air distribution tube mounted at the rear of the tank, air valves (shut-off valves) in INOX, top air hose and air connecting hoses with 2" STORZ couplings, micron filter, vacuum valve at the top of the tank, 1x vibrator 1 m before the pivot point Ladder and Walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor rail can be erected from below with a separate ladder folding part, equipped with locking brake when open, 1 aluminum safety grating leading along the left upper side of the tank, anti-slip coating on the tank Feed Hose Holder: 4 hose tube holders 5 m long DN 200 in aluminum with 4 hoses DN 100 and STORZ couplings, hose holder with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Durumu: kullanılmış, azami yük ağırlığı: 14.000 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2009, bir sonraki muayene (TÜV): 06/2025, Donanım: ABS, Feldbinder HEUT 31.2 2-axle silo trailer, BPW axles, disc brakes, air suspension, 4x sliding covers, ABS Empty weight: 4,000 kg Permissible total weight: 18,000 kg Dkedpjvud Hxsfx Afmok

Durumu: kullanılmış, azami yük ağırlığı: 29.900 kg, toplam ağırlık: 37.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2009, yükleme alanı hacmi: 45 m³, Üretim yılı: 2009, Donanım: ABS, * Feldbinder 3-axle tipping silo with compressor and tipping hydraulic system * Volume: 45 m³ * Air suspension * Lift axle * SAF axles * Aluminium rims * EBS (Electronic Braking System) * ABS (Anti-lock Braking System) Dkjdpfxswqmddo Afmek

Durumu: kullanılmış, azami yük ağırlığı: 27.700 kg, toplam ağırlık: 34.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2002, yükleme alanı hacmi: 57 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.995 mm, Donanım: ABS, Feldbinder KIP 57.3 3 dingilli, toz ve dökme malzeme silosu, yaklaşık 60 m³ Taşıma kapasitesi: 27.700 kg Dingil: SAF Dkedjtvh T Tspfx Afmsk Fren: Kampana Destek noktaları: 4x !!! Yatık tip Feldbinder dorse de sunabiliriz. !!! Finansman/leasing konusunda da iş ortaklarımızla size memnuniyetle destek oluruz. Tüm bilgiler taahhütsüzdür. Hata ve ara satış hakkı saklıdır.

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2008, renk: diğer, Üretim yılı: 2008, Achse 1: links 8 mm, rechts 8 mm Dkedpfx Aoxvy S Njfmjk Achse 2: links 8 mm, rechts 8 mm Achse 3: links 10 mm, rechts 10 mm = Weitere Informationen = Eigengewicht: 6.500 kg