Kullanılmış Müller-Mitteltal Ra Fragmanlar satın al (265)

Koşul: yeni, azami yük ağırlığı: 14.620 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * RA-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * Tire pressure monitoring system (RDÜ) * Emergency release device for spring-loaded cylinders * Disc brakes * 2 x 10 t BPW wide-track axles * Air suspension (automatic lowering when brake is uncoupled) * Drawbar approx. 2,300 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle * Plastic tool box 450 x 470 mm, mounted on the right side * Side-mounted storage box 1,000 x 500 x 500 mm * Closed plastic mudguards, front and rear * Closed lateral underride protection, usable as advertising surface * Rear underrun protection * Rear plastic bumper pads * Rear hazardous goods placard * 15-pin electrical connector * LED rear lights * Rollway length approx. 6,830 mm * Pneumatic 4-point container lock Nsdpfx Aljv Nulzjasct * Mechanically adjustable stop brackets (2 positions) front left and right on the tracks * 265/70 R 19.5 twin tires * Unladen weight 3,220 kg * --Permissible total weight up to 20,000 kg technically possible-- * Approx. 1,130 mm ride height when loaded * Suitable for container lengths from 5,500 to 7,000 mm * Hot-dip galvanized chassis * Air tanks, axles, slewing ring, and drawbar * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Available from approx. week 29 / 2026

Koşul: ikinci el, makine/araç numarası: 217, boş ağırlık: 3.450 kg, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 01/1993, süspansiyon: çelik, lastik boyutu: 385/65 r22,5, dingil mesafesi: 5.300 mm, renk: turuncu, Donanım: ABS, Drum brake Nedpenh Rzyjfx Alaect Subject to errors and omissions

Koşul: ikinci el, boş ağırlık: 3.750 kg, azami yük ağırlığı: 14.250 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/1993, toplam uzunluk: 2.450 mm, toplam genişlik: 1.500 mm, süspansiyon: çelik, lastik boyutu: 385 / 65 R 22,5, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, SAF axles, leaf suspension, ABS (anti-lock braking system), side aluminium underrun protection. Body: container 6.0 to 7.0 m, mechanical locking mechanism. ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE; subject to change, prior sale, and errors excepted. Nodpfxsi Rmkte Alajct

Koşul: ikinci el, boş ağırlık: 3.450 kg, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2010, bir sonraki muayene (TÜV): 07/2025, süspansiyon: hava, lastik boyutu: 235/75R17.5, renk: sarı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, turntable trailer, air suspension, ABS (anti-lock braking system), container locking device, underrun protection, side aluminum safety guard, twin tires. Njdpfowypl Nex Alaoct Body: 2-axle external roller trailer for roll-off containers from 5.5m to 7m, or 2x 10m³ skip containers. BPW axles, drum brakes, pneumatic locking, pneumatic drawbar lowering! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted!

Koşul: ikinci el, boş ağırlık: 3.000 kg, azami yük ağırlığı: 15.000 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2007, süspansiyon: hava, lastik boyutu: 385/55R22.5, renk: siyah, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden Nodoi Rq Sdjpfx Alaect Body: 2-axle hooklift trailer for containers up to 7m, equipped with 2x 9t BPW axles, drum brakes, and 2x pneumatic locks. ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to change, prior sale, and errors excepted!

Koşul: ikinci el, boş ağırlık: 3.450 kg, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2010, bir sonraki muayene (TÜV): 07/2025, süspansiyon: hava, lastik boyutu: 235/75R17.5, renk: sarı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, turntable trailer, air suspension, ABS (anti-lock braking system), container locking device, underrun protection, side aluminum safety guard, twin tires. Ncjdpfx Alsxgilmoaet Body: 2-axle external roller trailer for roll-off containers from 5.5m to 7m, or 2x 10m³ skip containers. BPW axles, drum brakes, pneumatic locking, pneumatic drawbar lowering! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted!

Koşul: ikinci el, boş ağırlık: 8.850 kg, azami yük ağırlığı: 31.150 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 08/2019, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Yükleme alanı toplam uzunluğu yaklaşık 9.500 mm, alçak şasi yükleme alanı uzunluğu yaklaşık 7.360 mm, yükseklik yaklaşık 910 mm, 14 çift sabitleme halkası. Araç müşteri talebi üzerine sunulmaktadır. -- Yazım hataları, yanlışlıklar ve değişiklikler olabilir, örnek görsellerdir. Daha fazla veri için: !, Detaylar için: ! Njdsy Ulfnopfx Alasct

Koşul: ikinci el, boş ağırlık: 6.200 kg, azami yük ağırlığı: 23.800 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2006, süspansiyon: çelik, lastik boyutu: 235/75R17,5 141/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 141/140J, arka lastik boyutu: 235/75R17,5 141/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Lashing eyes, -- Errors, omissions, and changes excepted, sample images --, More data at: !, More details: ! Njdey T E Dnjpfx Alajct

Koşul: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2010, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Vehicle is being sold on behalf of a customer. Some wooden planks are damaged. 17 pairs of lashing rings. Loading height approx. 900 mm. -- Typographical errors, mistakes and alterations reserved, sample images -- More data at: !, More Details: ! Nedpfx Aey Tll Sslaoct

Koşul: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2010, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Vehicle is being sold on behalf of a customer. Some wooden planks are damaged. 17 pairs of lashing rings. Loading height approx. 900 mm. -- Typographical errors, mistakes and alterations reserved, sample images -- More data at: !, More Details: ! Nedpfx Ajy Ryb Nelajct

Koşul: yeni, süspansiyon: diğer, renk: diğer, vites türü: diğer, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Compartment for aluminium ramps, price per compartment, length approx. 2.48 m, width approx. 1 m, height approx. 27 cm. -- Subject to misprints, errors, and changes. Sample images -- For more details, see: ! Nedsy Rr E Tspfx Alasct

Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 02/2020, bir sonraki muayene (TÜV): 02/2027, yükleme alanı uzunluğu: 9.800 mm, yükleme alanı genişliği: 2.520 mm, Donanım: ABS, * ABS * Rear support * BPW ECO-Plus axles * Amber rotating beacon * Alloy wheels * Duomatic air coupling Ncedpfx Aey T Dh Selaet ----Body: Galvanized low-loader trailer (2500+7300mm)/Loading height approx. 900mm, rear sloped/Ramp height approx. 770mm, steel/wood floor with anti-slip covering, extendable to 3 meters, hydraulic loading ramps (folded for low loading angle) with anti-slip covering, also hydraulically laterally adjustable, lashing rings Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE !!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. The basis for all purchase contracts, invoices, proforma invoices, orders, and sales discussions are our terms and conditions (see imprint).

Koşul: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T 4: * EBS (Electronic Braking System) * Emergency release for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with in-cab display via EBS signal – no installation required on the truck side * Front & rear warning panel sets * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at the rear * 24 V - 15-pin as well as additional 12 V - 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye, height infinitely adjustable * Tool box made of powder-coated steel sheet and basket-style spare wheel holder on the right * Front closed plastic mudguards (single), rear straight steel spray aprons each with spray suppression * Side underrun protection * 500 mm forward offset extension * Fifth wheel platform extended to the front by 520 mm with 45° corners and 3 recessed lockable storage compartments with lids * Chassis made of high-strength fine-grain steel * Floor over the fifth wheel platform: 50 mm softwood, in the low-loader platform: 60 mm softwood Ncodpfjrczm Dox Alast * Outer boards of loading ramps: 50 mm bamboo wood * Four stake pockets per side (no stakes included), each also providing a 2 t lashing option * Load securing package (Lasi package) consisting of: 2 lashing eyes (6.4 t) front left and right on the main frame of the fifth wheel platform; 1 pair of 13.4 t lashing rings front and rear on the outer frame, 4 pairs of 10 t lashing rings per side—swiveling, lowerable, all-directional load, recessed in the frame; 2 pairs of 6.4 t lashing rings on the shovel recess, 8 pairs of galvanized folding extensions for 3 m overall width (not on rear slope) * Extension planks for widening, stored left side in the storage compartment * Shovel recess above the rear axles to the end of the approach slope: approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports at rear * Hydraulic, hot-dip galvanized loading ramps: approx. 3,000 x 720 mm * Hydraulic side ramp shift on sliding pipe from the ramp shaft * Load platform above fifth wheel: approx. 2,990 x 2,520 mm, rear loading platform: approx. 6,280 x 2,520 mm * Loaded platform height: approx. 860 mm (including 860 mm approach slope) * Chassis, turntable, loading ramps, rear mechanical folding supports: hot-dip galvanized * Axles, springs, air tanks, and turntable painted in black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 21.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with raising and lowering system ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Lighting / Electrics: * 15-pin electrical connector * LED lights 12/24 V * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Preparation before the front wall and rear slope for retrofitting container locks for transporting 20" containers * Designed for 21 t GVW with reinforced frame and axles * Reinforcement package on the chassis for transporting drilling equipment * 50 mm softwood floor in clamped design * Front wall provided with preparation for retrofitting container locks * Bolted front wall made of smooth sheet steel * Split, fold-down side walls made of trapezoidal-profiled sheet steel with centrally mounted folding stanchion * Steel rear wall insertable between the ramps – storage bracket for unused panel inside at the front wall * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t retractable lashing rings every 600 mm * Profifix lashing rail centrally positioned along the longitudinal axis for securing options up to LC 3000 daN * 1 x 10 t lashing ring at each front and rear corner * Lashing package with 2 x 8 t flush-mounted lashing rings per side in the outer frame; various holes for 1.2 t lashing options in front and rear cross beams ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (retractable to 20 mm) * Rear run-up angle approx. 860 mm from chassis ----Loading Heights: * Unladen approx. 940 mm * Laden approx. 910 mm ----Wheelbase / Tires: * 1,810 mm * Tires: 235/75R17.5 ----Painting: * Painting of the side walls in a RAL color of your choice (no special or metallic paints); can be changed up to approx. 6 weeks before completion * Drawbar, front wall, tailgate, folding supports, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images shown ----Delivery Time: Nodpfx Ajl Tihxslaect * Available from week 29 / 2026

Koşul: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 21.0 – Technical Specifications and Equipment Overview: ---- Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes ---- Axles: * 2 x 11 t Gigant axles ---- Suspension: * Air suspension with lifting and lowering function ---- Drawbar / Towing Eye: * Drawbar with 50 mm flange towing eye; height-adjustable drawbar ---- Lighting / Electrical System: Nedpfjq Dyu Uox Alajct * 15-pole electrical connector * LED lights, 12/24 V * RDÜ tire pressure monitoring system ---- General Attachments: * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Side underrun protection * Plastic quarter mudguards ---- Low Loader Platform: * Front of bulkhead and rear slope prepped for subsequent installation of container locks for 20" container transport * Version with 21 t GVW, reinforced chassis and axles * Reinforcement package on the chassis for drill rig transport * 50 mm softwood floor, clamped design * Front of bulkhead prepped for subsequent installation of container locks * Bolted front wall made of smooth steel sheet * Split side walls made of trapezoidal profiled steel sheet, fold-down with center folding stake * Rear wall made of steel, slidable between the ramps (with storage holder at the front when not in use) * Bolted rear stakes ---- Load Securing: * Perforated outer frame, approx. 45° edge, with 2 t lashing capacity every 480 mm * Optional installation of 3 t drop lashing rings every 600 mm * Profifix lashing rail centrally aligned with the longitudinal axis for lashing up to LC 3000 daN * In the front and rear corners, each with 1 x 10 t lashing ring * Load securing package (Lasi-Paket): on each side, 2 x 8 t retractable lashing rings in the outer frame; various bores in the front wall and end cross member for 1.2 t lashing points ---- Ramps: * One-piece mechanical steel grating ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (can be pushed together to 20 mm) * Rear approach slope approx. 860 mm (chassis) ---- Loading Heights: * Unladen: approx. 940 mm * Laden: approx. 910 mm ---- Wheelbase / Tyres: * 1,810 mm * Tyres: 235/75 R17.5 ---- Paintwork: * Side wall paintwork in a custom RAL color shade (special or metallic paint not available); amendable up to approx. 6 weeks before completion * Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted black ---- Additional Information: * New vehicle with manufacturer’s warranty * Subject to alterations and prior sale * Sample images ---- Delivery Time: * Available from calendar week 29 / 2026

Koşul: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes Ncedpfxsl Th Evo Alast * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle equalization front and rear * Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required * Warning sign packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at the rear * 24 V - 15-pin and additionally 12 V - 7+4-pin power cable * Extended connection lines for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Tool box made of powder-coated sheet steel and spare wheel carrier in basket design, right side * Enclosed single plastic mudguards at the front * Straight rear steel splash guards each with spray suppression * Side underrun protection * Extended offset cranking by 500 mm to the front * Turntable platform extended by 520 mm at the front with 45° corners and 3 recessed, lockable storage compartments including covers * Chassis made of high-strength fine-grained steel * Floor over the turntable platform made of 50 mm softwood, in the lowbed platform 60 mm softwood * Outer planks of the access ramps made of 50 mm bamboo wood * Four stake pockets on each side (stakes not included) with simultaneous 2 t lashing capacity * Lashing package consisting of: 2 lashing rings 6.4 t at the front left and right on the main frame of the turntable platform, each 1 pair 13.4 t lashing rings front and rear on the outer frame, and additionally 4 pairs 10 t swivel and lowerable lashing rings per side, loadable in all directions and recessed in the outer frame, 2 pairs 6.4 t lashing rings sideways at the excavator stick holder, 8 pairs galvanized folding extensions for 3 m total width (not including rear slope) * Widening planks stored in a side locker on the left * Excavator stick holder above the rear axle to the end of the approach slope approx. 2,300 x 740 x 190 mm * Mechanical rear supports * Hydraulic, hot-dip galvanized access ramps approx. 3,000 x 720 mm * Hydraulic side-shifting of ramps on sliding tube from ramp shaft * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm approach slope) * Chassis, turntable, access ramps, mechanical folding supports at rear hot-dip galvanized * Axles, springs, air tanks and turntable painted in black * New vehicle with manufacturer’s warranty * Errors and interim sale excepted * Available immediately from Egestorf

Koşul: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 1.000 mm, Üretim yılı: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-up assistance for maneuvering purposes on the 1st axle (activated via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and lifting of the lift axle via an additional switch in the tractor * Automatic lowering of the air suspension during tipping (can be deactivated via control element in the cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping operation ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * LED rear lights 12 / 24 V with galvanized protective housing ----Drawbar / Flange eye: * Drawbar with adjustable K80 ball coupling ----Coupling height: * Coupling height approx. 440 - 550 mm loaded, with elevated tower for connection lines ----General attachments: * Support winch at the front * Bolt-on steel underrun protection * Plastic quarter mudguards before the first and after the last axle * Removable protective grille for rear lights (not permitted under road traffic regulations – must be removed before driving on public roads) ----Chassis: Njdoy Tr Hijpfx Alaect * Chassis made of fine-grained steel ----Tipping body: * Three-way steel tipper body (fixed front wall, continuous side walls without central posts, right side wall swinging on central locking and foldable with sideboard spring raising, left side wall foldable with sideboard hydraulics, tailgate swinging with automatic hook locking) * 5mm steel floor made of HARDOX-450 or equivalent ----Load securing: * 4 x 3 t UVV lashing rings recessed in the outer frame on each side ----Paintwork: * Axles, air tank, support winch, flange eye painted in black tone * Tipping body painted in RAL color of choice (no special or metallic coatings), changes possible up to approx. 6 weeks before completion * Chassis, protective grille for rear lights, hot-dip galvanized ----Info: * Sample images ----Delivery time: * The vehicle is still under construction and will be completed in week 44 / 2026, assuming uninterrupted and continuous production.

Koşul: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 1.000 mm, Üretim yılı: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-up aid for maneuvering on the 1st axle (activated via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and raising of the lift axle via an additional switch in the tractor unit * Automatic lowering of the air suspension during tipping (can be deactivated by a control element in the driver’s cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping process ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * LED rear lights 12 / 24V with galvanized protective housing ----Drawbar / Flange Tow Eye: * Drawbar with K80 ball coupling, adjustable mm (dimensions not specified) ----Coupling Height: * Coupling height approx. 440 - 550 mm when loaded with elevated support for connection lines ----General Attachments: * Landing leg at the front * Bolted steel underrun protection * Plastic quarter mudguards before the first and after the last axle * Removable tail light guards (not permitted under StVZO and must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grained steel ----Tipping Platform: * 3-way steel tipper body (fixed front wall, continuous side walls—without intermediate posts—right side wall swinging via central locking as well as folding down with drop-side spring lifter) * Left side wall foldable with drop-side hydromat * Tailgate swinging via automatic hook lock * 5mm steel floor made of HARDOX-450 or equivalent Ncsdsy Tr Hcepfx Alaot ----Load Securing: * 4 x 3 ton UVV lashing rings recessed on each side in the outer frame ----Painting: * Axles, air tanks, landing leg, flange tow eye painted in black * Tipping body painted in one RAL color of your choice (no special or metallic paint), can be changed up to approx. 6 weeks before completion * Chassis, protective grilles for rear lights, hot-dip galvanized ----Notes: * Sample images ----Delivery Time: * The vehicle is still under construction and, barring any disruptions or changes in production, will be completed in calendar week 44 / 2026

Koşul: ikinci el, azami yük ağırlığı: 18.050 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2010, yükleme alanı genişliği: 2.520 mm, Donanım: ABS, • Spring ramps • Spare wheel holder • 7 lashing rings per side • 4 stake pockets per side Nodpfey T Tvxjx Alasct • 50 mm towing eye • Loading height: approx. 910 mm • Drum brakes • ABS • Leaf suspension • EBS • Twin tires All information subject to change / prior sale reserved.

Koşul: ikinci el, azami yük ağırlığı: 29.750 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2010, bir sonraki muayene (TÜV): 05/2026, Ölçü-B 11.750 mm Boş ağırlık 10.250 kg Aks yükü 2 x 10.000 kg Döner tabla üzerinden yükleme uzunluğu 2.400 mm (350 mm eğimli dahil) Yükleme uzunluğu 7.700 mm (900 mm eğimli dahil) Yükleme yüksekliği 880 mm Genişlik 2.550 mm, 3.000 mm'ye kadar genişletilebilir Ekskavatör kolu için havuz (UxGxY yaklaşık 2.500 x 740 x 180 mm) SAF akslar, havalı süspansiyonlu 2 parçalı hidrolik rampalar, 2.100 mm + 2.000 mm uzunluğunda, 650 mm genişliğinde dahil Rampalar hidrolik olarak ayarlanabilir Arkada hidrolik destek Nsdpfx Aexpmmmslajct 2. akstan sonra tekerlek boşluğu Önde tekerlek boşluğu, üst uzunluk yaklaşık 2.000 mm x 1.100 mm, alt derinlik yaklaşık 350 mm 3. ve 4. aks arasında tekerlek boşlukları Arkada tekerlek boşluğu, üst uzunluk yaklaşık 1.300 mm x 550 mm, alt derinlik yaklaşık 220 mm

Koşul: ikinci el, boş ağırlık: 6.400 kg, azami yük ağırlığı: 23.600 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2013, yükleme alanı uzunluğu: 7.800 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 920 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: sarı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Araç konumu: yolda / sevkiyat halinde, 3 aks, döner tabla, yaprak süspansiyon, ABS (kilitlenmeyi önleyici fren sistemi), bağlama halkaları, hidrolik rampalar, arka destek, yan alüminyum yan koruma, ikiz lastikler. Üst yapı: Hidrolik çıkış rampalı, galvanizli rampalara sahip 3 akslı alçak şase treyler, 3x 10 tonluk akslar! Tüm bilgiler, aracın sevkiyat halinde olması nedeniyle teyitsizdir! Aksesuar bilgileri kesin değildir, değişiklik, ara satış ve hatalar saklıdır! Ncodpfxsy R Ekis Alajt

Koşul: ikinci el, azami yük ağırlığı: 38.230 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2026, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Müller-Mitteltal Low Loader with Wheel Wells TS 3 RM ML 30.0 2 Loading Heights and Ramps * Fifth wheel load increase from 12 t to 18 t included. King pin mounted in: Second king pin position 2", king pin up to and including Gooseneck 2,750 mm. Rear swing radius approx. 2,400 mm (recommended minimum clearance: 150 mm). Forward swing radius 1,480 mm or 1,570 mm with spare wheel. Note: Adequate clearance to the towing vehicle must be ensured by the customer. * Pull-out sections for the wheel wells front and rear (205 mm deep). 6 removable planks for wheel well mounting brackets as receive slots according to code 09.112 ALU air tank instead of steel. Nsdpfey R Ipusx Alaoct * Smartboard control box mounted as an infotool on the trailer with pressure sensors for total axle load display. Display options either via the control box or in the truck via the EBS air suspension system (depending on truck manufacturer) * ?SP-combi package: Toolbox with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, on the saddle platform W=2,480 x H=500 mm with folding top cover, side doors and angled Alu side walls foldable to the saddle platform (500 mm high), ALU rear wall plug-in (150 mm high), ALU boards inside and outside painted RAL 9006 white aluminum. Incl. folding and removable rear stanchions, galvanized (without top coat). Incl. bolted front section. Front cross member length to gooseneck 3,935 mm. Forward swing radius without spare wheel with gooseneck measurement 2,450 mm or 2,750 mm approx. 1,750 or approx. 1,480 mm. * 2 container locks recessed in the front cross member * 3 storage compartments under the saddle platform for storing optional ALU loading ramps or wooden planks for wheel well covers * Folding outriggers / extendable outriggers (galvanized) and wooden planks for widening incl. (not on the rear slope), plank storage on the saddle platform (maximum load track width 2,500 mm) * Second LED position light in the warning package at front and rear (double lighting), only in conjunction with the warning package * 2 LED reversing lights at the rear of the trailer, activated with reverse gear (suitable for 12V and 24V), a maximum of 2 extra units permitted * 7-pin socket at the rear, allocated for overlength illumination with tail light (58 R) and ground * Rubber lining on the entry slopes left and right (approx. 860 mm long) 190 07644 rubber strip, on the inner plank of the single-piece ramps * Fully automatic central lubrication system with pump (24V), grease container and integrated trailer control unit, without ramp connection (for steering: incl. connection to the distributor on the saddle platform), Note: Only for towing vehicles with 24V lighting system! Subject to prior sale and errors excepted! Sale exclusively under our General Terms and Conditions Important notice: Despite careful checking of all details in our offer, errors may occur. In some cases, these are caused by transmission errors in the systems of the various platform providers. For this reason, we would like to point out that all information is provided without guarantee and does not constitute any legal claim. Legal notice: This sales advertisement does not constitute an offer in the sense of §145 BGB. Rather, it is information for contract initiation. The information provided here is without guarantee and does not constitute any ...

Koşul: ikinci el, azami yük ağırlığı: 6.800 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 04/2026, Müller-Mitteltal KWH 9.9 ML Cable Transport Trailer with Diesel Engine * KWH 9.9 ML * Drum brake system EBS 2S/2M * BPW axles * Leaf suspension with parabolic springs * Spring-assisted square tube props at the rear with base plate, safety locking bolts for various support heights * Drawbar with 40 mm or 50 mm bolt-type towing eye (height adjustable, mm) * Bracket for additional drawbar, mounted laterally on the towing device, on the right in the direction of travel * Chassis made of torsion-resistant square tubes and cross beams * Plastic toolbox * LED lighting * Swivelling cable drum assembly consisting of base frame, rotary bearings, and drum carrying arms * Carrying arm ends with clamping closure for securing the drum shaft * Locking of the swivelling cable drum assembly to the chassis via a centrally positioned claw lock * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * For drum diameters of 3,000 mm, a maximum drum width of 1,650 mm is possible * Motor-hydraulic operated pull and push cylinders with load-holding valve * Control valve with automatic neutral position and pressure relief valve * Connectors, hoses, and pipes for hydraulic system in NW 13 Nsdpoy R Ipnsfx Alaoct * Required oil volume approx. 10 liters * Drum drive, hydraulic motor-driven, with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive * Pump assembly, hydraulically operated, with diesel engine and manual start, 6.5 HP with gear pump (150 bar) * Pressure supply selectable by switching connection lines between truck hydraulics or pump unit * Weather protection cover, hot-dip galvanized without top coat * Tyres: 315/80 R22.5 Interim sale and errors explicitly reserved! Sale exclusively under our Terms and Conditions. Important Notice: Despite careful verification of all details in our offer, errors may occur. Some may result from data transmission errors in the systems of various platform providers. Therefore, please note that all specifications are without guarantee and do not represent a legal claim. Legal Notice: This sale listing does not constitute an offer within the meaning of §145 of the German Civil Code (BGB). Instead, it provides information for contract initiation. The information provided here is without guarantee and does not constitute warranted characteristics.

Koşul: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) * 40 mm flange towing eye ----General Attachments: * Jost support windlass at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox mounted front right on the front wall exterior ----Electrics / Lighting: * Tire pressure monitoring system (RDÜ) * LED lighting ----Loading Platform: * Platform length 6.27 m * Suitable for container transport * 50 mm softwood floor Ncjdpfx Aljq Ra D Esast * Preparation in front of front wall for retrofitting container locks * Bolted front wall in smooth sheet steel * Drop-down, trapezoidal-profile steel side walls with sideboard spring assist * Steel rear wall, can be stowed between ramp holders when not in use, secured inside in front of the front wall * Rear staking pockets bolted ----Load Securing: * Perforated external frame, angled at approx. 45 degrees, with lashing capacity of 2 t every 480 mm * Optional installation of 3 t recessed lashing rings every 600 mm possible * In each corner (front and rear), 1 x 6.3 t lashing ring * Various holes in the front and rear carriers for 1.2 t lashing options ----Ramps: * One-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear drive-up angle approx. 860 mm ----Tires: * Tires: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear accent and loading ramps * Board sides painted in RAL 9010 pure white * Optional painting of the side walls in another RAL color available at extra cost ----Information: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery Time: * Available from week

Koşul: yeni, azami yük ağırlığı: 13.490 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, TRA-Kombi 18.0: 3 in 1 = for roll-off containers, skip containers, and as a low loader ---- Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ---- Axles: * 2 x 10.5-ton axles ---- Suspension: * Air suspension with manual lowering at the rear ---- Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment ---- Electrics / Lighting: * TPMS (Tire Pressure Monitoring System), display possible in the truck via EBS signal (no installation required in the truck) * LED tail lights 12 / 24 V * 15-pin power connector ---- General Mounted Parts: * Toolbox made of powder-coated sheet steel * Spare wheel holder in basket design, right side * Closed side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear underrun protection buffers * Folding rear A-sign ---- Loading Platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll-off containers * Steel sheet floor with wheel wells in the bogie area * When transporting roll-off containers, container length of 5,500 – 7,000 mm possible * Pneumatic 4-point clamp lock and mechanically insertable stop angles at the front in the runway * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable bin stops for lateral centering of bins, front 4 bin stops inserted with swiveling stop * Weld bead as anti-slip surface in the ramp area * Mechanical drop-down supports at the rear ---- Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements to secure bins by friction and form fit, 4 lashing rails in cloverleaf design (side) * 1 pair of 13.4 t UVV lashing rings at the front * Each side with 4 x 8 t lashing eyes recessed in the outer frame ---- Ramps: * Aluminium approach ramps (10.6 t / pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) ---- Paintwork: * Reflective contour tape on the sides and rear * Frame hot-dip galvanized * Axles and drawbar painted black ---- Information: Ncsdpol Tld Ijfx Alast * Load securing certificate in accordance with DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * --Permissible total weight of 20,000 kg technically possible-- * New vehicle without first registration with manufacturer warranty * Errors and prior sale excepted ---- Delivery Time: * Available immediately from Egstorf