Alçak şasi römork

MÜLLER-MITTELTAL T4 40,0 , Agrar, hydr. Rampen,3 m. Paket

Durumu: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, * T 4: * EBS * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs Kljdpfx Adsrczm Do Uop * Mechanical axle compensation front and rear * Tire pressure monitoring with display function in the truck via EBS signal – without truck-side installation * Warning sign packages front & rear * Contour marking tape on sides and rear, reflective * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED beacon * 24 V – 15-pin and additionally 12 V – 7+4 pin power cable * Extended connector lines for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Closed single mudguard at the front (plastic) * Straight steel mud flaps at the rear, each with spray suppression * Side underrun protection * Extended offset cranking by 500 mm forwards * Bogie platform extension at the front by 520 mm with 45° corners, 3 integrated compartments incl. lids and lockable * Chassis made of high-strength fine-grained steel * Floor above the bogie platform made of 50 mm, and in low-bed platform made of 60 mm softwood * Outer planks of loading ramps made of 50 mm bamboo wood * Four stake pockets per side (no stakes included) with simultaneous 2 t lashing possibility * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform, front and rear pairs of 13.4 t lashing rings on outer frame, 4 pairs per side of 10 t lashing rings, swiveling and lowerable, loadable in all directions and integrated in the outer frame, 2 pairs of 6.4 t lashing rings on the side in the excavator arm rest, 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Widening planks stored sideways left in storage compartment * Excavator arm rest above rear axle to end of approach slope approx. 2,300 x 740 x 190 mm * Mechanical drop legs at rear * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp displacement on sliding tube from ramp shaft * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded deck height approx. 860 mm (including 860 mm approach slope) * Chassis, bogie, loading ramps, and rear mechanical drop legs hot-dip galvanized * Axles, springs, air tanks, and slewing ring painted in black tone * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Available from week 21 / 2026

Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 7.500 kg, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 44.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.190 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, süspansiyon: çelik-hava, lastik boyutu: 235×75 R17,5, dingil mesafesi: 1.310 mm, Üretim yılı: 2024, Donanım: ABS, merkez döner tabla, CETRATEK 4-Axle Low Loader TL89.4 (EU-COC) Short Description Robust low loader for heavy machinery transport. Frame constructed from high-strength ST-52/S355 steel, with optional fine-grained steel S700. Each ramp supports up to 20 t load, can be folded mechanically or hydraulically without loss of capacity. Optionally available as a low-bed version, with loading height in the wheel recess area adjustable from approx. 900 mm down to approx. 500 mm. Dimensions / Construction Overall length: 11,914 mm, overall height: 3,775 mm (over ramps) Platform: Gooseneck 2,440 mm + loading area 6,750 mm Width: 2,540 mm (manually extendable by 250 mm on each side) Coupling to 1st axle: 2,767 mm, to 2nd/3rd axle: 6,136 mm Axle spacing: front 1,310 mm, rear 1,360 mm Platform height: 900 mm (low-bed approx. 500 mm), track width 1,850 mm Rear ramps: 3,000 × 750 mm, laterally adjustable, 20 t per ramp Drawbar eye height: 400–900 mm; turntable Ø 110 mm (CYR) Floor: steel + 45 mm hardwood (hornbeam), coated for protection Weights / Capacity a) GVW 44,000 kg → Payload approx. 36,500 kg* b) On-road 24,000 kg → Payload approx. 16,500 kg * Version a) requires a special permit according to §70 StVZO; appraisal/DEKRA inspection available at extra cost. Drawbar eye Ø 50 mm (optional Ø 40 mm), unladen weight approx. 7,500 kg Rear supports: manual (hydraulic option available) Steel Structure / Chassis Welding qualification TS EN ISO 9606-1, processes TS EN ISO 4063, shielding gases TS EN ISO 14175 Kljdpfx Adou Rbzve Uop 4 × 11-t axles (TRAX), tyres 235/75 R17.5 (16 pcs., PETLAS or equivalent; Continental/Michelin available at extra cost), rims 6.75×17.5, air suspension, approved up to 100 km/h Brakes / Electrics WABCO EBS 4S/2M, linings 330×200, air tanks 2×80 L + 1×60 L Brake cylinders: 4× type 24 + 4× type 24/30, levers 165 mm Voltage: 24 V (voltage converter required with 12 V towing vehicle) Side reflectors: 4× LED per side + 2× white front reflectors, rear lights 2× LED, 2× triangular reflectors Connections: 7-pin EBS ISO 7638, 7-pin ISO 1185/3731, 15-pin ISO 12098 Tractor operation notice: 12→24 V converter as well as ABS/EBS connection (ISO 7638) and power supply (e.g., ISO 1185/12098) required for on-board hydraulics. Hydraulics (Ramps) 2 cylinders, including changeover valve to use tractor unit’s on-board hydraulic system Accessories (extract) 2 toolboxes, 2 wheel chocks (metal), fire extinguisher box Reflectors (side white/yellow; extensible yellow/red), rectangular rear reflectors Lashing eyes: 7 per side + 6 on the platform (10 t each) Mud flaps (front/rear), hose/cable holders on the drawbar Paintwork Sandblasted, 3× epoxy primer, 3× acrylic (≈ 230 µm), 1× acrylic clear coat Warranty 2 years on frame structure and axles (excluding accidents/operator error) 2 years on electrical & braking system (excluding wear parts such as brake pads, accidents/operator error) 1 year on paintwork (excluding accidents/operator error) Technical specifications and prices subject to change without notice. Images for illustration purposes only and may include optional features.

Durumu: yeni, boş ağırlık: 7.500 kg, azami yük ağırlığı: 32.500 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, bir sonraki muayene (TÜV): 03/2023, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 3.000 mm, yükleme alanı yüksekliği: 900 mm, süspansiyon: hava, lastik boyutu: 235/75r17,5, Üretim yılı: 2026, Donanım: ABS, merkez döner tabla, TOP SPECIFICATION => INCLUDING THE FOLLOWING EQUIPMENT: - Chassis frame hot-dip galvanized in immersion bath - Front storage compartment at the top of the platform, with hinged lid - Rear storage compartment at the top of the platform, with hinged lid - Recess for excavator arm support in the rear area of the low-bed - 3 m equipment package without slope - Warning package for special permit - Steel sheet toolbox - Stake pocket package in the outer frame - Basic hydraulics for truck with rear connection - Hydraulic ramp lifter for one-piece ramps Kledpfx Aeglblled Ujp - Hydraulic lateral ramp shift - Hydraulic support legs left and right - 1 pair of lashing rings (6 t) in the outer frame, bolted - WABCO SmartBoard configured - SSV complete, front left HTD409525K - COC paperwork OPTIONAL - Rubber flooring on the ramp: €1,890 net - Rubber flooring on the slope: €1,250 net - Swivel drawbar 40 / 50 DIN