Düşük yükleyici

Humbaur HTD 40 v21

Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 7.500 kg, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 44.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.190 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, süspansiyon: çelik-hava, lastik boyutu: 235×75 R17,5, dingil mesafesi: 1.310 mm, Üretim yılı: 2024, Donanım: ABS, merkez döner tabla, CETRATEK 4-Axle Low Loader TL89.4 (EU-COC) Short Description Robust low loader for heavy machinery transport. Frame constructed from high-strength ST-52/S355 steel, with optional fine-grained steel S700. Each ramp supports up to 20 t load, can be folded mechanically or hydraulically without loss of capacity. Optionally available as a low-bed version, with loading height in the wheel recess area adjustable from approx. 900 mm down to approx. 500 mm. Isdou Rbzvopfx Aggjik Dimensions / Construction Overall length: 11,914 mm, overall height: 3,775 mm (over ramps) Platform: Gooseneck 2,440 mm + loading area 6,750 mm Width: 2,540 mm (manually extendable by 250 mm on each side) Coupling to 1st axle: 2,767 mm, to 2nd/3rd axle: 6,136 mm Axle spacing: front 1,310 mm, rear 1,360 mm Platform height: 900 mm (low-bed approx. 500 mm), track width 1,850 mm Rear ramps: 3,000 × 750 mm, laterally adjustable, 20 t per ramp Drawbar eye height: 400–900 mm; turntable Ø 110 mm (CYR) Floor: steel + 45 mm hardwood (hornbeam), coated for protection Weights / Capacity a) GVW 44,000 kg → Payload approx. 36,500 kg* b) On-road 24,000 kg → Payload approx. 16,500 kg * Version a) requires a special permit according to §70 StVZO; appraisal/DEKRA inspection available at extra cost. Drawbar eye Ø 50 mm (optional Ø 40 mm), unladen weight approx. 7,500 kg Rear supports: manual (hydraulic option available) Steel Structure / Chassis Welding qualification TS EN ISO 9606-1, processes TS EN ISO 4063, shielding gases TS EN ISO 14175 4 × 11-t axles (TRAX), tyres 235/75 R17.5 (16 pcs., PETLAS or equivalent; Continental/Michelin available at extra cost), rims 6.75×17.5, air suspension, approved up to 100 km/h Brakes / Electrics WABCO EBS 4S/2M, linings 330×200, air tanks 2×80 L + 1×60 L Brake cylinders: 4× type 24 + 4× type 24/30, levers 165 mm Voltage: 24 V (voltage converter required with 12 V towing vehicle) Side reflectors: 4× LED per side + 2× white front reflectors, rear lights 2× LED, 2× triangular reflectors Connections: 7-pin EBS ISO 7638, 7-pin ISO 1185/3731, 15-pin ISO 12098 Tractor operation notice: 12→24 V converter as well as ABS/EBS connection (ISO 7638) and power supply (e.g., ISO 1185/12098) required for on-board hydraulics. Hydraulics (Ramps) 2 cylinders, including changeover valve to use tractor unit’s on-board hydraulic system Accessories (extract) 2 toolboxes, 2 wheel chocks (metal), fire extinguisher box Reflectors (side white/yellow; extensible yellow/red), rectangular rear reflectors Lashing eyes: 7 per side + 6 on the platform (10 t each) Mud flaps (front/rear), hose/cable holders on the drawbar Paintwork Sandblasted, 3× epoxy primer, 3× acrylic (≈ 230 µm), 1× acrylic clear coat Warranty 2 years on frame structure and axles (excluding accidents/operator error) 2 years on electrical & braking system (excluding wear parts such as brake pads, accidents/operator error) 1 year on paintwork (excluding accidents/operator error) Technical specifications and prices subject to change without notice. Images for illustration purposes only and may include optional features.

Durumu: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles Isdpfsrczm Dex Aggjik * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring system with indication option in the truck via EBS signal – no truck-side installation required * Warning sign package at front and rear * Reflective contour marking strips on the sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED rotating beacon * 24 V 15-pin power cable and additional 12 V 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm draw eye and stepless height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design, right side * Front enclosed single plastic mudguards * Rear straight steel mud flaps, each with spray suppression (anti-spray design) * Side underrun protection * Extended offset neck, 500 mm forward * Turntable platform extended by 520 mm at the front with 45° corners, 3 integrated lockable storage compartments with covers * Chassis made from high-strength fine grain steel * Floor over turntable platform made of 50 mm softwood, lowbed platform made of 60 mm softwood * Outer planks of the loading ramps made from 50 mm bamboo wood * Four stake pockets each side (stakes not included), each with 2 t lashing possibility * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform, one pair 13.4 t lashing rings each front and rear side on the outer frame, four pairs each side of 10 t swiveling and lowerable lashing rings, loadable in all directions and recessed in the outer frame, two pairs 6.4 t lashing rings on the excavator arm recess, 8 pairs of galvanized folding outriggers for 3 m total width (not at the rear end slope) * Extension planks stored in a side compartment on the left * Excavator arm recess over rear axle to end of ramp slope approx. 2,300 x 740 x 190 mm * Mechanical fall supports at the rear * Hydraulically galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic side ramp shift on sliding pipe from ramp shaft * Loading area over turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Laden loading height approx. 860 mm (including 860 mm ramp slope) * Chassis, turntable, loading ramps, mechanical rear folding supports hot-dip galvanized * Axles, springs, air tanks, and turntable painted in black tone * New vehicle with manufacturer's warranty * Subject to prior sale and errors * Available from calendar week 46 / 2025

Durumu: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring system with indication option in the truck via EBS signal – no truck-side installation required * Warning sign package at front and rear * Reflective contour marking strips on the sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED rotating beacon * 24 V 15-pin power cable and additional 12 V 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm draw eye and stepless height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design, right side * Front enclosed single plastic mudguards * Rear straight steel mud flaps, each with spray suppression (anti-spray design) Ijdpfx Ajl Th Evsggjik * Side underrun protection * Extended offset neck, 500 mm forward * Turntable platform extended by 520 mm at the front with 45° corners, 3 integrated lockable storage compartments with covers * Chassis made from high-strength fine grain steel * Floor over turntable platform made of 50 mm softwood, lowbed platform made of 60 mm softwood * Outer planks of the loading ramps made from 50 mm bamboo wood * Four stake pockets each side (stakes not included), each with 2 t lashing possibility * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform, one pair 13.4 t lashing rings each front and rear side on the outer frame, four pairs each side of 10 t swiveling and lowerable lashing rings, loadable in all directions and recessed in the outer frame, two pairs 6.4 t lashing rings on the excavator arm recess, 8 pairs of galvanized folding outriggers for 3 m total width (not at the rear end slope) * Extension planks stored in a side compartment on the left * Excavator arm recess over rear axle to end of ramp slope approx. 2,300 x 740 x 190 mm * Mechanical fall supports at the rear * Hydraulically galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic side ramp shift on sliding pipe from ramp shaft * Loading area over turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Laden loading height approx. 860 mm (including 860 mm ramp slope) * Chassis, turntable, loading ramps, mechanical rear folding supports hot-dip galvanized * Axles, springs, air tanks, and turntable painted in black tone * New vehicle with manufacturer's warranty * Subject to prior sale and errors * Available from calendar week 46 / 2025