Alçak şasi dorse

MÜLLER-MITTELTAL TS3 hydr Rampen GIGANT LUFT

Durum: yeni, azami yük ağırlığı: 31.500 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, Donanım: ABS, Wiese 3-axle semi-trailer with lift table and foldable tail section. Ideal for transporting forklifts and/or aerial work platforms. Technical Specifications: - 3 x 10 t axles - Lift axle Fjdpfx Amevw Hmtebspp - Steering axle with Smart Steering (steers forward and reverse) - Outer beam chassis with incline - Gooseneck design rated for 18 t, suitable for 2- and 3-axle tractor units - Hydraulic lift table adjustable in 3 positions - Rear in tailgate version including hydraulic extensions, usable as loading ramps, drive-over ramp or loading area (total length reduced when tailgate is upright) - Remote control for ramps and lift table - Front wall - Grated floor - Numerous lashing points - SmartBoard - Central lubrication system - Steel construction, hot-dip galvanized and painted A wide range of options available on request, for example: - Winch - Toolbox on the fifth wheel step - Aluminium rims Further information available upon request.

Durum: yeni, boş ağırlık: 10.700 kg, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r 17,5, renk: gri-siyah, Donanım: ABS, Gooseneck: • Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood floor Fpedpfx Aohlz S Nsmbep Extendable loading platform: • Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° • Cut-outs in the outer frame of the loading platform for securing straps • Approx. 48 mm thick hardwood covering, checker plate covering over the axles Two-part steel ramps: • One pair of galvanized, two-part steel ramps with approx. 48 mm thick hardwood covering • Ramp sections fold in and out hydraulically, with hydraulic lifting system and hydraulic lateral adjustment • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reversing lock, activation via reverse gear and manual operation • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Painting: • First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer • High-quality 2-component top coat, single color in MB 7350 Novagrey • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lift capacity (50t test load) Steel construction: • Steel construction made of high-strength fine grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system according to EU requirements, 24 Volt lighting • ASPÖCK UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets Included accessories: • One spare wheel with holder • One galvanized steel headboard approx. 400 mm high • Yellow-red air couplings on the galvanized connection panel at the front • 4 wheel chocks • Bracket for rotating beacon at the rear of the trailer • Holder at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the rear chamfer of the loading platform • Cover plates for bridging the gap between ramps and loading platform • White reflector tape to EU specifications on the sides, extension, and red at rear • Electro-hydraulic unit mounted at the rear, under the loading platform • On both sides of the gooseneck and ramps, holders for warning panels with socket • Control valves for the ramps mounted on the right trailer side • ALU sideboards and tailboard on the gooseneck approx. 2,440 x 400 mm • Rear, galvanized removable stakes (body length approx. 2,560 mm) • Four approx. 400 mm extendable warning boards with position light • 3 pairs of WADER container locks in deck for 20ft, 30ft, or 40ft container • 6 pairs of stake pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the rear chamfer of the loading platform • Anti-slip sand coating on checker plate surfaces above kingpin and loading platform • Load pressure gauge for axle load measurement including load chart • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) and hot finished.

Durum: mükemmel (kullanılmış), dingil konfigürasyonu: > 3 aks, izin verilen dingil yükü (dingil 1): 11.200 kg, izin verilen dingil yükü (dingil 2): 11.200 kg, izin verilen aks yükü (aks 3): 11.200 kg, yükleme alanı uzunluğu: 14.600 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 880 mm, toplam uzunluk: 14.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 880 mm, süspansiyon: hava, lastik boyutu: 245 / 70 R17.5, renk: mavi, Donanım: hidrolik arka platform, Renk: Mavi Yük Kapasitesi: 72.600 kg Fjdpjx R Undefx Ambspp Yükleme alanının yüksekliği: 885 cm Genişletilebilir Frenli Temel Özellikler Üretici: Goldhofer Tip: Rampalı STZ L6 65/80A Yarı Düşük Platformlu Römork Şasi numarası: WG0STZL6A80030419 Üretim Yılı: 2008 Ağırlıklar/Yük Kapasitesi Çekme piminin taşıma kapasitesi: 26.000 kg Aks yükü: 11.200 kg Toplam aks yükü: 6 x 11.200 kg = 67.200 kg Brüt Araç Ağırlığı (BAA): 93.200 kg Boş ağırlık: 20.600 kg Yükleme kapasitesi: 72.600 kg Akslar Aks markası: BPW Hava süspansiyonu 1. Aks: Sabit 2-6. Akslar: Hidrolik direksiyonlu 1. ve 2. Aks: Kaldırılabilir Yüksek-alçak valfi WABCO fren sistemi Lastikler: 245 / 70 R17.5 Boyutlar Uzunluk: 14.600 mm Uzatma: +7.200 mm Maksimum uzatılmış uzunluk: 21.800 mm Yükleme alanı genişliği: 2.550 mm Yükseklik: Yaklaşık 885 mm - 925 mm Çekme piminin yüksekliği: +/- 1.350 mm Ek Bilgiler • Kamyon PTO'su ile çalışır • Bağlama halkaları • Sabitleme yuvaları • Kısmen ahşap yükleme alanı • Mekanik destek ayakları • Hidrolik yükleme rampaları • Genişletilebilir yükleme alanı • Arka tampon, farlı • Çekme pimi 3,5" • Merkezi yağlama • Aşırı yük işareti • Uzaktan kumandalı radyo • Destek ayakları • Kuğu boynu üzerindeki alet kutusu = Ek Bilgiler = Genel Bilgiler Üretim Yılı: 2008 Tasarım Yılı: 2008 Aks Konfigürasyonu Lastik ölçüsü: 245 / 70 R17.5 Aks markası: BPW Eco Süspansiyon: Hava süspansiyonu Arka aks 1: Çift lastikli; Kaldırılabilir aks; Maks. Aks yükü: 11.200 kg Arka aks 2: Çift lastikli; Kaldırılabilir aks; Maks. Aks yükü: 11.200 kg; Direksiyonlu Arka aks 3: Çift lastikli; Maks. Aks yükü: 11.200 kg; Direksiyonlu Arka aks 4: Çift lastikli; Maks. Aks yükü: 11.200 kg; Direksiyonlu Arka aks 5: Çift lastikli; Maks. Aks yükü: 11.200 kg; Direksiyonlu Arka aks 6: Çift lastikli; Maks. Aks yükü: 11.200 kg; Direksiyonlu Ağırlıklar Boş ağırlık: 20.600 kg Yük: 72.600 kg Toplam ağırlık: 93.200 kg Fonksiyonel Üstyapı markası: WABCO Yükleme alanının yüksekliği: 88 cm Genişletilebilir üstyapı: Evet Durum Teknik durum: Çok iyi Görünüm: Çok iyi Mali Bilgiler Fiyat: Talep üzerine

Durum: yeni, azami yük ağırlığı: 38.100 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 13.100 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5 3PMSF, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: 5 pairs of fold-out lashing rings on the outside 3 pairs of fold-out lashing rings on the outside 1 pair of horizontal lashing rings at the front end of the platform Cut-outs in the outer frame of the loading platform for attaching tension straps Approx. 48 mm thick hardwood flooring, checker plate flooring above the axles Landing Gears: JOST landing legs with 2-speed gearbox, lifting capacity 24 t Axles and Tyres: BPW axles, two fixed axles, two steered trailing axles, air suspension, drum brakes, raise/lower function Trailing steering axles with electro-magnetic reverse lock, activated via reverse gear or manually Axle tool Tyres 205/65 R17.5 3PMSF Brake System: WABCO brake system according to EU regulations, with EBS-E Fpodetphtmepfx Ambsp Steel Construction: High-strength fine-grained steel construction Steel Grades: S355J2+N/S355MC S690QL/S700MC Electrical Equipment: Electrical system according to EU regulations, lighting: 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front connection panel, with 24N, 24S & 15 pin sockets Connections according to ISO Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by 2-component zinc-dust primer Premium 2-component topcoat, single colour in MB 7350 Novagrau No metallic finish possible Rear section metallized and painted RAL 9010 Accessories Included: 1 spare wheel 205/65 R 17.5 TPMS tyre pressure monitoring system according to ECE R 141 Galvanized front connection bar with yellow-red air couplings 4 chocks with holder at the front wall Mounting at rear of gooseneck for ALU loading ramps Galvanized folding supports under the loading platform’s rear chamfer Holder for a warning beacon at the rear of the trailer Height-adjustable tarpaulin superstructure Galvanized front wall with tensioning mechanism for sliding curtains Height-adjustable by approx. 400 mm Roof brand "EDSCHA" sliding forward on ALU roof support profiles, screwed front and rear walls On platform: 3 pairs of adjustable stanchions Rear of superstructure can be hydraulically widened left and right by approx. 750 mm Sliding roof with upward swinging portal beam Sliding tarpaulin with 700 mm length reserve, securing straps at approx. 600 mm intervals Height upper edge of superstructure approx. 3,960 mm Driving with open sliding roof is not permitted and will damage the tarpaulin Suspension rail for ALU loading ramps at the rear of the vehicle At the gooseneck and at the left and right rear panel: each with a bracket for warning boards including socket Mudflap at the rear of the trailer European reflector boards at the rear of the trailer 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform Lift axle on the front axle with TEBS E control, depending on current axle load and loading status Rear of superstructure with closed ALU wing doors Anti-slip sand finish painted on checker plates on gooseneck and platform Central lubrication system BEKAMAX, standard grease NLGI-2, removable protective cover for pump 80 km/h speed sticker at rear and on both sides Load gauge for axle load determination including load chart

Durum: yeni, boş ağırlık: 11.000 kg, azami yük ağırlığı: 25.100 kg, toplam ağırlık: 36.100 kg, dingil konfigürasyonu: 3 dingil, süspansiyon: hava, lastik boyutu: 215 75 17,5, KALEPAR TRAILER - KLP 334V3 TRUCK TRANSPORTER 3 x SAF axles (1st axle lift axle, 2nd axle fixed, 3rd axle steering axle) Gross vehicle weight: 36,100 kg Payload: 25,100 kg Unladen weight: 11,000 kg Overall length: 13,600 mm + 1,700 mm Hydraulic rear extension, length: 1,500 mm Central extension up to 1,700 mm Braking system: Wabco 2S-2M Electrical system: Aspöck Systems Air suspension Hydraulic rear extension across the full width: 2,550 mm, length: 1,500 mm Trailer fully galvanized (100% galvanized) Tyre size: 215/75 R 17.5 Tyre brands: Pirelli, Goodyear, Fulda, Continental Fifth wheel height: approx. 950 mm - 1,150 mm (other coupling heights available) 24V 4.5 kW electro-hydraulic motor Steel ramps: 2 pieces Custom modifications possible on request. Color freely selectable / Free of charge. Fsdpekqmuijfx Ambspp Net export possible. All documents required for registration (COC, TÜV, etc.) are available.

Durum: ikinci el, Donanım: is filtrasyon filtresi, - Partikül filtresi - Klima - 3 kova - Oilquick bağlantısı - 11.850 çalışma saati Fodozl Nyzspfx Ambjpp

Durum: ikinci el, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2017, * SAF akslar Fodpfx Amjwta Aljbspp * Tekerlek yuvaları * Genişliği ayarlanabilir hidrolik yükleme rampaları * Havalı süspansiyon * Genişletilebilir * Boş ağırlık: 11.020 kg ----Dahili Araç Numarası: 11010----Hatalar ve ara satışlar saklıdır. WhatsApp desteği mevcut! Araç hakkında sorunuz varsa veya ek bilgi için bize rahatça WhatsApp üzerinden yazabilirsiniz WhatsApp Almanca, İngilizce -- WhatsApp Almanca, İngilizce, Arapça

Durum: ikinci el, azami yük ağırlığı: 42.500 kg, toplam ağırlık: 60.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2022, with 12 axles, split, hydraulically suspended, hydromechanical forced steering, with rear bevel and drive-on ramps STZ-L gooseneck - robust steel welded construction - designed loading area: 3,950 x 2,480 mm including bevel - hydromechanical forced steering (dual circuit steering) - turntable-mounted saddle plate with replaceable 2 or 3.5 inch king pin and adjustable steering wedge - fifth wheel load: 24 t - steering radius to rear: 2,600 mm Loading Area - recessed outer sections: 4,630 mm, 420 mm deep, providing a loading height of 470 mm or 830 mm with decks installed - extendable by 2,053 mm - including aluminium bridging ramps for creating a level platform - excavator arm trough at rear chassis: 4,900 mm long, 880 mm wide, 480 mm deep - rear chassis length: 4,900 mm incl. 500 mm bevel, loading height 890 mm - one pair of wheel recesses in the lower loading area - hydraulically suspended 3-axle chassis - split Gigant axles with 600 mm lift Rear of vehicle - design: “Beveled” 500 mm - hydraulic rear support Drive-on ramps - two-piece drive-on ramps, length 2,850 + 1,850 mm, width 800 mm - rubber coating with climbing strips Braking System - two-line all-wheel pneumatic brake system with diaphragm brake cylinders - automatic load-dependent brake (ALB) - automatic linkage plates (AGS) - parking brake via spring-loaded cylinders - ABS/ABV brake Special equipment Radio remote control for steering and ramp control Central lubrication system Fodpfx Amjw Etd Tsbepp Technical data Gooseneck Loading area (LxW): 3,950 x 2,480 mm Saddle height loaded: 1,300 mm Loading area Loading platform (LxW): 10,030 mm x 2,850 mm, extendable by 2,053 mm recessed outer sections 4,630 mm long plus 2,053 mm extension center beam 980 mm excavator arm trough: 4,900 mm long, 880 mm wide, 480 mm deep Steering 1st axle to 3rd axle: hydromechanically forced steering (dual circuit steering)

Durum: yeni, azami yük ağırlığı: 38.953 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Gross vehicle weight: 49,500 kg Fifth wheel load: 18,000 kg Axle load: 31,500 kg Unladen weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck length: 3,850 mm Fifth wheel height loaded: 1,200 mm Loading platform length: 9,300 mm Extendable by: 0 mm Axle spacing: 1,360 mm Steering angle radius (rear): 2,300 mm Loading height at max. load: 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical Description Gooseneck: Gooseneck with chamfered front corners at 45° and rear taper of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, 30 mm thick. Loading platform: Loading platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear slope of approx. 1,000 mm x 8°. 6 pairs of folding lashing rings facing outward (LC 5,000 daN). 2 pairs of folding lashing rings facing outward (LC 10,000 daN). 1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN). Cut-outs in the outer frame of the loading platform for attaching tensioning straps. (LC 2,000 daN). Hardwood flooring approx. 48 mm thick, above the axles fitted with chequer-plate covering. Ramps: Two-piece steel ramps: One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically foldable ramp sections, hydraulic lifting device and can be hydraulically adjusted laterally. Maximum load per pair: 40,000 kg Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: 235/75 R 17.5 tyres as per manufacturer's selection. Axles: SAF axles, air-suspended, with drum brakes, featuring lift/lower function. Last axle is force-steered with electro-magnetic reverse lock, activatable via reverse gear or manually. Axle tools. Brake System: Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit. Fjdpjg Sk Trofx Ambjpp Steel Construction: Steel construction made from high-strength fine-grained steel. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: Premium and durable corrosion protection via sandblasted welded frame, primed with 2-component (2K) zinc dust primer. High-quality single-tone 2-component (2K) top coat in RAL colours of your choice. Rear metalized and painted in RAL 9010 (pure white). Metallic paint not possible. Electrical System: Electrical system compliant with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets. ISO-compliant connections. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories Included 2" king pin One galvanized steel front bulkhead approx. 400 mm high. At the galvanized front connection strip yellow/red airline couplings. 4 wheel chocks with holder on the front bulkhead (± 5kg). Cable for supplying electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long, max. 250A) between semi-trailer and tractor unit, with plug connection (ANDERSON-ANDERSON). Galvanized folding supports under the rear slope of the loading platform. Bracket for a rotary beacon at the rear of the trailer. Control valves for the ramps installed on right-hand side of trailer (± 4kg). Yellow reflective tape according to EU regulations on the sides and rear of the trailer. Electro-hydraulic unit mounted at the rear under the loading

Durum: iyi (kullanılmış), ilk tescil: 03/2017, Donanım: hidrolik arka platform, Üretim yılı: 2017 Azami yüklü ağırlık: 48.000 kg Fpsdpfozlt Hrex Ambsp Teknik durumu: iyi Görsel durumu: iyi Hasar: Yok