Kullanılmış delme ekipmanı - dikey satın al (36)

Durum: ikinci el, Please quote reference number: 23557 upon inquiry. Specifications: - Manufactured around 1985. Lhjdpfsza Sldex Acgei - Operating hours unknown. - Engine and compressor in working condition - Deutz D4 10 engine - Belt width: approx. 25 cm - Machine width: approx. 220 cm - Winch - Fully functional - Ready for delivery Own weight: 1 Model: 50 drilling rig = Further information = Please contact ATS Norway for more information.

Durum: ikinci el, Üretim yılı: 2004, Please quote reference number upon request: 23524 Specifications: - Year: 2004 - Engine hours: 7,735 - Percussion hours approx.: 2,750 - 1832 hammer installed - 149 kW - Weight: 14,100 kg - Undercarriage (see photos) - Angle meter - Hour counter - Straight grinder - Recently serviced Ledpfjy U T Tyex Acgohi - Remote control - Central lubrication - Carousel - Rod changer - Drill rods available at extra cost - Winch - Lighting - Ready for delivery Description: We are offering for sale an Atlas Copco D7 drilling rig from 2004, equipped with an 1832 hammer, hour counter, and angle meter. Everything is operational, but faults and defects may occur, as it is a 2004 model. The machine has recently been serviced. The hammer was overhauled approximately 150 hours ago. According to the owner, the angle meter requires calibration. Drill rods are available for an additional charge. Ready for delivery. Dead weight: 14,100 kg Engine hours: 7,735 Model: D7-01 drilling rig with 1832 hammer, hour counter, and angle meter = Further information = Serial number: AVO 04A784/8992 0029 xxxx Please contact ATS Norway for further information.

Durum: ikinci el, Üretim yılı: 2007, Please quote reference number: 22766 Specifications: Model year: 2007 Hours: approximately 6,000 Lhjdpfxsywabie Acgoi Hammer hours: uncertain, but the owner estimates around 2,500 2 remote control transmitters Central lubrication system One hydraulic rod 1838 LE hammer Hammer overhauled 4 years ago Includes 2 manuals Available for delivery from early May Description: 2007 Atlas Copco ROC D3 radio-controlled rig. The hammer was overhauled four years ago, but the owner states it has not been used much since then. Available for delivery from early May. Operating weight: 1 Model: ROC D3 radio rig = More information = Please contact ATS Norway for further details.

Durum: ikinci el, Üretim yılı: 2012, Please quote reference number on request: 23410 Specifications: Manufactured in 2012 Hours: approx. 11,200 122 kW Net weight: approx. 10,000 kg Chassis (see pictures) 280 mm New pipe magazine Cavotec remote control Special undercarriage with oscillation movement, IVA 450 mm triple-grouser track plates Nemek M-407 mast with 7-ton lifting capacity, mounted on extended feed console with 1 m telescopic boom Nemek 260/520 kpm rotation with 2 3/8 API spindle (0–130 rpm) Transition adapter from 2 7/8" API IF to 3 API Reg and further to 2 3/8 API included DEUTZ water-cooled diesel engine type TCD 2013 O4L 2V output according to ISO 3046/1: 122 kW at 2000 rpm/25°C ambient temperature, EURO Stage 3 Infinitely variable torque limitation and speed control by remote control Nemek 400 kg top winch with lowering valve and brake Engine heater for 230 V AC 24 V DC system with 2 x 57 Ah dry batteries Monitoring with automatic stop and error display Electrically proportional hydraulic control for all drilling and boom functions - CAN-bus Proportional feed and counterpressure control by remote control Hydraulically driven pump for drilling fluid Bürstette 280 mm with double hydraulic clamp R-clamp cylinder 2 height-adjustable drill magazines with telescopic extension for 60 pcs 76-mm drills Prepared mounting bracket for VBG drawbar coupling Pressure reducer with outlet, 3–10 bar Odex overvoltage arrester housing 305 mm Rear-mounted winch with 6-ton pulling force Water tank mounted under the right pipe magazine Toolbox mounted under the left magazine Hydraulically driven water pump 150 l/min, 90 bar Hydraulically operated welder/generator 2 rear support legs Ledey Sr Epepfx Acgshi Own weight: 10,000 Model: 407TS Borerigg = Further information = Contact ATS Norway for more information.

Durum: ikinci el, Üretim yılı: 1997, Please quote reference number upon request: 23207 Specifications: Model year: 2002 8,465 operating hours 59.5 kW Additional hydraulics 1 tooth bar Additional tires included Cutting unit Watch video Description: Atlas 1304 with tooth bucket and several spare tires for sale. The machine has relatively low operating hours. Occasional electrical faults may occur; some warning lights illuminate but then disappear on their own. Ready for delivery. Operating weight: 5,000 kg Model: Commando 300 Ljdpfoy Nh Nrox Acgshi = More Information = Serial number: Serial no. 97Axxxx Contact ATS Norway for further information.

Durum: ikinci el, Üretim yılı: 1989, Please quote reference number upon request: 21250 Specifications: Year of manufacture: 1989 Operating hours: 5520 Hammer is operational Requires a new battery Winch and suction system are functional according to the owner Ready for delivery. Own weight: 11 Engine hours: 5520 Model: 712HC-01 Lhedpfjw Ucm Iox Acgsi = Further information = Please contact ATS Norway for more details.

Durum: ikinci el, Üretim yılı: 2021, Please provide the reference number on request: 22668 Specifications: Operating hours: approx. 2,000 Good undercarriage with tires Blade with trailer hitch Winch Lever control Weight: 3,034 kg Power: 40.3 kW Lhedpfx Aceyuan Nogsi 12 V Hatz engine Width: 1,680 mm Video available Service documentation available Available immediately Description: The Geotech 504 from 2021 is a modern, compact, and highly flexible geotechnical drilling rig featuring a Stage V engine and advanced functions suitable for most soil investigation methods. It is easy to transport. Own weight: 3,034 kg Model: 504 Georigg med skjær = More information = Serial number: 2xxxx Please contact ATS Norway for further details.

Durum: ikinci el, Üretim yılı: 2012, Please quote reference number upon request: 21979 Specifications: Year of manufacture: 2012 Operating hours: Owner is unsure Double key system Deutz engine Water tank Chassis (see pictures) Flushing system Lhodpsx Dhadofx Acgsi Including drilling equipment, 3 hammers Drilling diameter: 4–10 inches Maintenance carried out by the owner Ready for delivery Own weight: 11 Model: Brønnborerigg = More information = Serial number: 120705xxxx Please contact ATS Norway for further information.

Durum: yeni, yakıt deposu kapasitesi: 1.500 l, Üretim yılı: 2026, ALTRO-Tec GmbH supplies the right vacuum suction system for any application! M-VAC 1500 l / 1.5 m³ - 1.5 m³ hot-dip galvanized tank Ledju Iawwspfx Acgshi - Fully galvanized 2.7 t chassis - Lid for opening the tank - Tank can be emptied by switching the compressor - Compact and agile vehicle, ideal for operation in cities, parking garages, etc. - Matching accessories for various applications available - Suction depths up to 6 meters possible - 3600 liters air capacity - Various drive types: petrol, diesel, electric Applications: - Extraction of highly sandy drilling slurries in specialist foundation engineering - Suction of liquids, also with solid components - Cleaning of ducts, shafts, pits - Emptying of portable toilets and shafts - Suction of alkalis, emulsions, and wastewater - Wide range of accessories – paintwork in customer color available (special option) With ALTRO-Tec GmbH, you receive everything from a single source: - On-site demonstration and operator training - Repair and maintenance – fast spare parts supply - Assistance in case of technical problems - All types of installations: MultiCar, hook-lift system, and much more! - Custom constructions / special filters – rental units and trade-ins Delivery worldwide For technical data and further information, please contact us. *Custom engineering and special equipment* available upon request, contact us. Delivery times and availability upon agreement. Photos are for illustration purposes only; for current images, please contact us at: 02723 717 61-0 or via email: anfrage(ât)altro-tec.de Please note that we can only process your inquiry if you provide your name and contact information such as your telephone number or email address.

Durum: yeni, Üretim yılı: 2026, Mobile Suction System 0.5 – 14 m³ Suction Tank / Vacuum System • Mounted on subframe according to DIN 30722 • Steel tank with capacities ranging from 500 to 14,000 liters • Container and subframe hot-dip galvanized • Continuous angular frame, fully welded along the entire length • Designed for max. 0.5 bar pressure • Designed for max. 1.0 bar vacuum • 2 liquid separators • Safety system: manhole and control valve, with safety manhole including overflow valve • Mechanical fill-level indicator with scale • 2 internal baffle walls with T-bar ring reinforcement • Rear floor suction connection 4" x Ø 108 Perrot connection • Left-side suction connection 4" x Ø 108 Perrot connection • Lockable storage boxes with lids on both sides for hoses and tools • Engine unit positioned at the front, between the container and roll-off hook Compressor: Depending on model and requirements, e.g.: MECII 9000 ballast system • Vacuum compressor with air injection cooling • Heat-resistant vanes • Crash protection system • Max. delivery rate: 9,000 liters/minute • Max. pressure: 0.5 bar • Max. vacuum: -0.95 bar • Continuous operation permitted at -0.6 bar • Automatic lubrication • Lubricating oil reservoir: 2.5 liters • Lubrication level indicator Engine: • Briggs & Stratton Vanguard • 31 HP (23.1 kW) • Two-cylinder V engine, 4-stroke • OHV valve control • Electric start • 12V battery • V-belt drive including guard • Fully assembled on a mounting console • Enclosed housing as theft protection High-pressure cleaner: • Working pressure: 30–150 bar • Cleaning performance: 13 l/min • Fitted with original Honda engine • Automatic high-pressure hose reel • Includes 15m HD hose DN08 • Cleaning lance • Dirt blaster Lsdpel I I Rpjfx Acgshi • Two plastic tanks, each 500 liters For technical data and further information, please contact us. Worldwide delivery, dealer inquiries welcome. – Custom builds and special equipment available upon request. Please contact us. – Pictures are sample images. For up-to-date images, please contact us at: 02723 717 61-0 or by email: anfrage(ât)altro-tec.de Please note that we can only process your inquiry if you provide your name and contact details such as your phone number or email address.

Durum: ikinci el, güç: 178 kW (242,01 bg), yakıt türü: dizel, Üretim yılı: 1999, çalışma saatleri: 1.378 h, HSB 216-P1 Üretim yılı: 1999 Delme makinesi 242 kW Ağırlık: 18.100 kg Lhodpfx Aceydafgjgei HSL 450-8 / 18HY-A-30/J