Kullanılmış Müller-Mitteltal Tandem Anhänger Mit Rampen satın al (13.549)

Koşul: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum mounts ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering system ----Drawbar: * Drawbar, 1,800 mm long, with 40 mm towing eye ----Electrical / Lighting: * Tyre pressure monitoring with display option in the truck dashboard via EBS signal (no installation required on truck side) * 15-pin electrical connector * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Fittings: * Aluminium air tank * Stainless steel toolbox mounted on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame, 45° angled with perforation pattern for load securing devices, lashing capacity per tie-down point 2,000 kg at a spacing of 480 mm * Option to install 3,000 kg drop-in lashing brackets at approx. 600 mm intervals – delivery includes 12 pieces of 3,000 kg lashing brackets per side * 5 pockets per side for pipe stakes, 100 x 50 mm, integrated in the outer frame (stakes not included in delivery) * 30 mm phenolic plywood floor ----Cable Drum Mounts: * 3 galvanized cable drum mounts, secured by container lockings with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and drum width max. 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross connection * Max. drum weight per mount: 6,000 kg * Without drive and drum brake * Support arm with tension latch for drum shaft securing Fpodpfxsx Nli Nj Addog * Steel drum shaft, 76 mm diameter with centering and rotatable ends * 2 spacer rings * 2 polyamide centering cones * 4 pieces of 3.2 t lashing eyes on support arms for customer’s own securing of the drum against rotation and unspooling ----Loading Height: * Loaded approx. 1,040 mm ----Paintwork: * Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized * Axles painted in a black tone ----Info: * Technical uprating to 30 t GVW possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 51 / 2026

Koşul: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: Fsdpfx Asx Nlkgeddspg * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift/lowering device ----Tow Bar: * Tow bar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck cockpit via EBS signal (no installation required on truck side) * 15-pin power plug * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm * Lateral underrun protection * Plastic quarter fenders * Rear underrun guard ----Platform: * Zurr-fix external frame, 45° bent, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing * Option for 3,000 kg lashing rings at approximately 600 mm intervals – 12 units of 3,000 kg lashing rings included per side * 5 pockets per side in the outer frame for pipe stakes 100 x 50 mm (stakes not included) * 30 mm phenolic resin plywood flooring ----Drum Supports: * 3 galvanized drum supports secured by container locks with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm, maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm with cross-connection * Load capacity per cable drum support 6,000 kg * Without drive and drum brake * Support arm with tension latch for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 locating rings * 2 centering cones made of polyamide * 4 units 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading Height: * Loaded approx. 1,040 mm ----Coating: * Chassis, turntable, tow bar, outer frame, underrun guard hot-dip galvanized * Axles painted in a shade of black ----Information: * Technical uprating to 30 t GVW possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 51 / 2026

Koşul: yeni, azami yük ağırlığı: 13.410 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, yükleme alanı hacmi: 11 m³, Üretim yılı: 2026, * KA-TA-R 18.0 ML * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes * Tire pressure monitoring system with display capability in the truck’s dashboard via EBS signal (installation on the truck side not required) * 2 x 9 t Gigant axles * Air suspension with level control during tipping operation * Drawbar with 50 mm flange eye (adjustable by +77 mm and -33 mm via offset plate) * Jost landing gear at the front * Foldable galvanized steel underrun protection for paver feeding * Closed individual plastic fenders * Standing platform at the front wall * Manual roll-up tarpaulin * 15-pin electrical connector * LED tail lights with galvanized protective cover * 2 LED reversing lights * Chassis made of fine-grain steel * Steel three-way tipper body (side walls with MM profile – continuous without central stanchion – side walls pendulum-mounted via manual central locking, left side foldable with wall spring assist) * Roll tarp similar to RAL 7038 agate grey, with tarp tensioning by side ratchets and front and rear tensioning rubbers * Front wall platform of grating with step at the drawbar and a hand grip on the front wall * Tailgate made of HBW 400 steel, pendulum-mounted with automatic double claw lock * 5 mm steel floor from HBW 450 steel * Each side with 4 x 3 t recessed and foldable lashing rings – integrated in the steel floor * Reinforced and certified structure according to EN 12642 XL including cargo securing certificate up to 19 t * Side wall painting in a RAL color of your choice (excluding special or metallic paints) – color can be changed up to approx. 6 weeks before delivery * Axles, air tanks, landing gear, flange towing eye painted in black tone * Chassis, underrun protection and drawbar hot-dip galvanized * New vehicle with full manufacturer’s warranty * Errors and prior sale excepted Fedoxl Nkgspfx Addspg * Available from approx. week 44 / 2026

Koşul: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes ----Suspension: Fodpjvin T Sjfx Addjpg * Air suspension with lifting and lowering system, return-to-ride (RtR) valve, and manual lowering for loading operations ----Drawbar / Flange Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED rear lights 12/24 V mounted in underride guard ----General Attachments: * Landing leg at the front * External folding supports at the rear * Plastic toolbox – approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipping Body: * Steel pallet – 3-way tipper body made from high-strength fine-grained steel with high M-Strong sideboards and reinforced 180 bar tipping cylinder * Fixed front wall made from smooth steel sheet * Hardwood board for excavator bucket, bolted to front wall * Continuous side walls – folding, without central stanchion, with sideboard spring lifts and swinging via manual central locking * Screw-on rear stanchions * Combination steel rear swing doors – two asymmetrically split doors, swiveling and lockable up to 270°, non-folding, with additional swing frame for automatic rear door opening during tipping, locking via galvanized rotary bar and central locking system, deactivation function for automatic rear door opening when tipping backwards with open swing doors * 4 mm steel floor * Two-step access on front left * Mounting rail at rear for loading ramps ----Load Securing: * One 7-tonne lashing ring in each corner * Four 3-tonne lashing points recessed per side into the outer frame ----Loading Ramps: * Receiving chamber for loading ramps recessed in chassis at the rear * One pair of aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tyred and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipper body, underrun guard, rear folding supports hot-dip galvanized * Sideboard painting in a RAL colour of choice (except for special or metallic paints), can be changed up to approx. 6 weeks prior to completion * Axles, air tanks, flange drawbar eye, and front landing leg painted in black ----Information: * -- Load securing certificate in accordance with EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Koşul: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including Run-on-Release (RtR) valve and manual lowering for loading operations ----Drawbar / Towing Eye: * Drawbar with positive-lock height adjustment Fedovin Ucepfx Addopg * 50 mm flange towing eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12/24 V integrated into underride guard ----General Attachments: * Front support winch * External folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipper Body: * Steel platform – 3-way tipper body made of fine-grained steel with reinforced "M-Strong" high sideboards and reinforced 180 bar tipping cylinder * Fixed front bulkhead made of smooth steel sheet * Hardwood pad for excavator bucket, bolted to the front bulkhead * Continuous side walls – without center stanchion – folding, with sidewall spring assist and swaying function via manual central locking * Rear posts bolted * Combination steel swing rear doors – two-leaf, asymmetrically split, can be swung open 270° and locked in place (not fold-down), with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bar lock and central locking; deactivation function for automatic rear wall opening when tipping backwards with open swing door * 4 mm steel floor plating * Two-step entry on front left side * Mounting rail at rear for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * 4 x 3 t recessed lashing rings on each side in outer frame ----Loading Ramps: * Recessed compartment for ramps at the rear of the chassis * 1 pair of aluminum loading ramps (10 t/pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear posts, front bulkhead, tipper body, underrun protection, folding rear supports hot-dip galvanized * Sideboards painted in a RAL color of choice (no special or metallic paints); can be changed up to approx. 6 weeks prior to completion * Axles, air tanks, flange towing eye, and front support winch painted in black ----Info: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * TPMS Tire Pressure Monitoring System * EBS braking system * Drum brakes * BPW axles * Parabolic leaf springs * Front support winch * Rear spring-assisted square tube supports with base plate and safety locking pin for variable support heights * Drawbar with 40 mm screw-type towing eye (height-adjustable by mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made from torsion-resistant square tubes and cross members * Closed steel mudguards with splash protection * Closed lateral underrun protection, usable as advertising surface * Plastic toolbox with base insert (installed horizontally), approx. 500 x 350 x 400 mm * Swiveling cable drum support structure, clear width between drum arms 1,700 mm – with tension latch for drum securing at the support arm ends, as well as central claw-locking mechanism for securing the drum frame to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed control and brake for drum drive * Steel drum shaft with 76 mm diameter, including centering and rotatable ends * 1 pair of polyamide centering cones, stepped design * Hydraulic power pack with diesel engine * Fuel tank and hand starter Fedpfx Aju I Iqxjddopg * 6.5 HP engine with gear pump (150 bar) * Surface: hot-dip galvanized * New vehicle with full manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 8.800 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS braking system * Drum brakes * BPW axles * Parabolic springs * Support winch at the front * Spring-assisted square tube support legs at the rear with base plate and safety locking pins for adjustable support heights * Drawbar with 40 mm screw-type towing eye (height adjustable in mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and crossmembers * Enclosed steel fenders with splash protection * Enclosed side underrun protection, also suitable as advertising space Fpedju I Iqlepfx Addsg * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * Swivel-mounted cable drum assembly, interior width between drum arms 1,700 mm – with tension lock for drum securing at the ends of the support arms and central claw lock for securing the cable drum assembly to the chassis * Motor-hydraulic drum drive with oil motor * Valves and movable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft, 76 mm diameter with centering and rotating ends * 1 pair of polyamide centering cones, stepwise offset * Hydraulic power pack with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) * Surface hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Support winch at the front * Spring-assisted square tube supports at the rear with base plate, safety locking pins for various support heights * Drawbar with 40 mm bolted towing eye (height-adjustable mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made of torsionally stiff square tubing and cross-members * Enclosed steel mudguards with splash protection * Enclosed side underride guard, can be used as an advertising space * Plastic toolbox with floor liner (laying installation) approx. 500 x 350 x 400 mm * Swiveling cable drum construction, clear width between drum arms 1,700 mm, with tension latch for drum securing at the carrying arm ends as well as a central claw lock for connecting the cable drum frame to the chassis * Motor hydraulic drum drive with oil motor * Valves and movable, rubber-coated drive rollers * Hydraulic speed regulator and brake for the drum drive * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 1 pair of polyamide centering cones, stepped design * Hydraulic power unit with Loncin petrol engine, includes manual and electric starter * Fuel tank and manual starter Fpodpfeu I Iqrox Addog * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS Braking System * Drum Brakes * BPW Axle * Parabolic Springs * Front Support Wind Jack * Rear Square Tube Supports with Spring Assist and Base Plate, Safety Lock Pins for Adjustable Support Heights * Drawbar with 40 mm Screw-Type Towing Eye (height-adjustable mm) * 15-pin Electrical Connector * LED Lighting * Flashing LED Side Marker Lights * Chassis Made of Torsion-Resistant Square Tubes and Cross Members * Closed Steel Mudguards with Splash Protection * Closed Side Underrun Protection, Usable as Advertising Space * Plastic Toolbox with Bottom Insert (installed lying down) approx. 500 x 350 x 400 mm * Swiveling Cable Drum Superstructure, width between drum arms 1,700 mm – with tension lock for drum securing at support arm ends as well as a central claw lock for securing the cable drum superstructure to the chassis * Motor-Hydraulic Drum Drive with Oil Motor * Valves and Adjustable Rubber-Covered Drive Rollers * Hydraulic Speed Controller and Brake for Drum Drive * Steel Drum Shaft with 76 mm Diameter as well as Centering and Rotatable Ends * 1 Pair of Stepped Polyamide Centering Cones Fpsdpou I Iq Ejfx Addog * Hydraulic Pump Unit with Diesel Engine * Fuel Tank and Hand Starter * 6.5 HP with Gear Pump (150 bar) * Hot-Dip Galvanized Color * New Vehicle with Full Manufacturer Warranty * Subject to errors and prior sale * Immediately available ex Egestorf * Sample images

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS Brake System * Drum Brakes * BPW Axle * Parabolic Springs * Front Support Winch * Spring-assisted square tube supports at the rear with baseplate and safety locking pins for different support heights * Drawbar with 40 mm bolt-on towing eye (height adjustable, mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubular steel and cross members * Enclosed steel mudguards with splash protection * Enclosed side underrun protection, suitable as advertising space * Plastic toolbox with floor insert (installed lying down), approx. 500 x 350 x 400 mm * Swiveling cable drum structure, light width between drum arms 1,700 mm, with clamp lock for securing the drum at the ends of the support arms, as well as central claw lock for fixing the cable drum structure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated friction rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, with centering and rotating ends * 1 pair of stepwise graduated centering cones made of polyamide * Hydraulic pump unit with Loncin petrol engine, including hand and electric starter * Fuel tank and hand starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * Unladen weight 2,690 kg Fpodpfx Aju I Iqfeddog * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Available immediately ex Egestorf * Sample images

Koşul: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 Cable Drums (Cable Reel Mounts) ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with raise/lower control ----Drawbar: * Drawbar, 1,800 mm long, with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability on the truck dashboard via EBS signal (no installation required on the truck side) Fpjdpfx Ajx Nlkaoddog * 15-pin power connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * "Zurr-fix" outer frame, 45° bent, with drilled hole pattern for lashing points, lashing capacity per point: 2,000 kg at 480 mm spacing * Option to install 3,000 kg folding lashing rings at approx. 600 mm spacing – 12 pcs 3,000 kg lashing rings included per side * 5 pockets per side for stake tubes 100 x 50 mm in the outer frame – stakes themselves not included in delivery * 30 mm phenolic resin-coated plywood floor ----Cable Drum Mounts (Drum Supports): * 3 galvanized cable drum mounts secured by container locks with lateral forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with crossbar * 6,000 kg drum weight per cable drum mount * Without drive system and drum brake * Support arm with clamping latch to secure drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 clamping rings * 2 centering cones made from polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided securing against drum rotation and unwinding ----Loading Height: * Approx. 1,040 mm when loaded ----Paintwork: * Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized * Axles painted in black

Koşul: yeni, azami yük ağırlığı: 8.750 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal KA-TA-R 11.9 Tandem Low-Loader Three-Way Tipper Trailer with Ramps Reference Number: 11612 * NEW VEHICLE, not yet registered, now available in RAL 9016 traffic white * Door-to-door delivery available for an additional charge! * Gross weight: 11,900 kg, payload: 8,750 kg * Galvanized floor, 5m x 2.42m x 0.5m; side boards can swing, fold down, and be removed; prepped for later retrofit side board extensions * Front wall hot-dip galvanized * Lockable compartment under the tipping platform for loading ramp * Includes loading ramps 3.31m, 8t per pair * 4 UVV lashing rings LC 5000 daN at front and rear * 8 recessed, folding lashing eyes LC 3000 daN mounted in the tipper floor (centered) * Net hooks * Drawbar continuously height-adjustable, hot-dip galvanized, towing eye 40mm * Galvanized chassis * Tires: 235/75R 17.5 (x4), BPW axles, parabolic springs * Tire pressure monitoring * EBS (Electronic Braking System) * LED lighting system for 12+24 Volt * Side marker lights with indicator activation * Bolted, galvanized rear stanchions * Excavator bucket holder mounted on the front wall --- Fpedoyl Ebpepfx Addeg Please request an individual quote from us! Additional equipment options available. Financing from just €405 net for 72 months with no down payment and no final residual value. An offer from our financing partner "FM LeasingPartner" --- Our Opening Hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside of business hours, appointments can be arranged. WhatsApp Leasing, financing, and trade-ins possible---

Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0 ----Brakes: * Wabco EBS-E braking system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake coupling ----Axle: * Two SAF axles * First axle as lift axle (fully automatic) * Lift axle ride height +30 mm via actuator cylinder * Start-assist for shunting purposes and forced lowering on first axle activated via speed-dependent EBS electronics (no installation required on the truck side, includes cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flange towing eye – height adjustable by +77 mm and -33 mm – for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12/24V * 2 LED reversing spotlights switched with reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Wireless power supply 12+24 V via rear lamp circuit ----General Attachments: * BPW landing leg at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminium rims * Detachable pin towing coupling (use only with underrun protection retracted) * Enclosed plastic half-shell single fenders * Two-step access in front of the front wall on the left * Shovel and broom holder in front of the front wall * 2 stainless steel toolboxes (matte), approx. 650 x 350 x 320 mm, right side * Enclosed side underrun protection usable as advertising space ----Hydraulics: * Twin-circuit hydraulic connections (engine side from truck/tractor) rated for 180 bar (for tractor operation) * Double-acting control circuit for hydraulic rear door (mounted front right) operable via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (Serial no. 100746129, year 2023) * Base frame made from high-tensile fine-grained steel * 20,000 kg pulling force * Hook height 1,570 mm * Hooklift controlled via remote control * Remote control with quick function for lowering, not for lifting * Emergency stop switches, left and right * Container supports with four pads per side and one roller at the rear on each side * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist in lifting the main arm * 2 mechanical drop-down supports at the rear * Rated for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the charging cradle, the service brake must be applied to enable the remote. The brake lines must remain connected to allow the hydraulically/pneumatically controlled valves to open. * Monitoring system for underrun protection ensuring it is retracted during tipping ----Loading Height: * Unladen approx. 1,300 mm with lift axle lowered ----Paintwork: * Chassis, drawbar, step, underrun protection and drop supports hot-dip galvanized * Axles, air tanks, and front landing leg painted in black * Palfinger hooklift painted in black/yellow ----Infos: * Errors and prior sale excepted * Vehicle is in very good / like-new condition ----Container: Dimensions: * Load length: 5,500 mm * Load width: 2,300 mm * Load height: 1,000 mm Fsdpfx Adsyfy Rrjdopg Infos: * Mountings for hook systems avail...

Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E electronic braking system * Emergency release device for spring brake cylinders * Drum brakes * Duomatic brake coupling ----Axle: * 2 x SAF axles, rated for high load * First axle configured as lift axle (fully automatic) * Lift axle travel height +30 mm via height-adjustment cylinder * Start-assist function for maneuvering and forced lowering to first axle – activated through speed-dependent EBS electronic module (no installation required on towing vehicle, includes additional cable for in-cab operation from tractor) ----Air Suspension: * Air suspension with lowering function via radio remote control ----Drawbar / Flanged Eye: * 50 mm flanged towing eye - height-adjustable by +77 mm and -33 mm - for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary socket * LED lighting system 12 / 24V * 2 LED reversing lights, activated via reverse gear * EBS multi-voltage system, compatible with towing vehicles fitted with 12V & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Power supply for remote control: 12+24 V via tail light circuit ----General Equipment: * BPW manual landing gear at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-cut aluminium wheels * Pin-type towing coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell single wheel guards * Double access step, front left of the bulkhead * Shovel and broom holder in front of the bulkhead * 2 stainless steel toolboxes (matte finish), approx. 650 x 350 x 320 mm, mounted right-hand side * Enclosed side underrun protection, suitable for use as advertising space ----Hydraulics: * Dual-circuit hydraulic couplings (vehicle/tractor side) rated for 180 bar (tractor operation) * Double-acting hydraulic control circuit for rear tailgate (mounted front right), operated via radio remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame constructed from high-tensile fine-grained steel * 20,000 kg traction force * Hook height: 1,570 mm * Hooklift controls via radio remote * Quick function available for discharging, not for loading * Emergency stop button on both left and right sides * Container mounts: each side with 4 supports plus 1 rear roller each * Hydraulically operated rear internal locking * 2 additional hydraulic cylinders to assist main arm lifting * 2 x mechanical drop-down supports at rear * Homologated for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load Fpedpsx Dp Amofx Addog * Note: If the remote control is outside the charging cradle, the service brake must be applied to enable radio operation. Brake couplings must remain connected to allow operation of the hydraulic/pneumatic control valves * Monitoring system ensuring underrun protection is retracted before tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access steps, underrun protection, and drop supports hot-dip galvanized * Axles, air reservoirs, and front landing gear painted in black * Palfinger hooklift painted black/yellow ----Information: * Errors and prior sale excepted * Vehicle is in very good / as-new condition ----Container Dimensions: * Internal length: 5,500 mm * Internal width: 2,300 mm * Internal height: 1,000 mm Information: * Mounting brackets for hook s

Koşul: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lower system and RtR valve * Pressure gauge scale for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame Fjdpel Tlhrsfx Addjpg * Mechanically adjustable warning sign packages front and rear * Front axle: plastic quarter mudguards with splash protection * Rear axle: straight, galvanized steel sheet skirts with splash protection * Reflective contour tape on the sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12/24 V * Removable LED rotating beacon at the rear * 2 LED reversing lights (activated by reverse gear) * Drawbar with 50 mm towing eye and height adjustment * Tool box made of galvanized, black powder-coated steel sheet, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front extension in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip covering on the steel plate of the turntable platform * Load securing package consisting of: 1 x 13.4 t UVV lashing eye on left and right in front of the front wall support, 4 holes on each side of the turntable platform with 2 t lashing capacity each, 1 pair of lashing eyes (13.4 t) hanging at the rear left & right in front of the rear support, 4 pairs of UVV lashing rings (10 t) per side, pivoting and lowerable, loadable in all directions and integrated into the outer frame, 3 stake pockets per side with simultaneous 2 t lashing option * Hot-dip galvanized mechanical folding outriggers for 3 m total width (not at the rear bevel) * Beam holder for extensions under the chassis on the left, longitudinally * Excavator arm holder above the rear axle up to the end beam, approx. 2,100 mm long and approx. 190 mm deep, 2 pairs of 6.4 t lashing eyes per side in the excavator arm holder * Hardwood floor on the running surfaces of the low-loader platform * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) mechanically adjustable laterally * Outer beams of the loading ramps made of hardwood * Steel construction prepared for 6-control valve block * Loading edge unloaded approx. 950 mm +/- 20 mm chassis * Turntable, folding outriggers, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tank, drawbar painted in a black tone-- * Tyres 235/75 R 17.5 * Vehicle has a one-day registration in 07/2024 due to missing tire pressure monitoring system and was never loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: ikinci el, azami yük ağırlığı: 10.870 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2025, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2023, Donanım: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release system for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, front right side of chassis * 15-pin electrical connector * Multi-chamber tail lights * Bolted underrun protection * Plastic quarter mudguards * Net hooks in the positions of the central locking mechanism plus 2 on the front bulkhead * Chassis made from fine-grained steel * Steel pallet 3-way tipper superstructure, continuous side panels with internal tube reinforcement – without intermediate posts, folding with drop-side spring lift * Removable bolted rear stanchions * Combined steel double-wing rear doors, asymmetrically split, can swing and lock up to 270° – not foldable – with additional swinging frame for automatic tailgate opening during tipping, locking via galvanized rotary latch at the rear and central locking, deactivation function for automatic tailgate operation when tipping backwards with open door Fpjdpfxjl Th Hte Addeg * Each corner with 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes integrated in the outer frame on each side * 4 mm steel floor plate (fine grain steel) * Rear guide rails for loading ramps * Reinforced body with load securing certificate * 1 pair aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tyred and tracked vehicles * Lockable rear compartment under the loading deck, built into the chassis for the ramps * Chassis, drawbar, underrun protection, rear stanchions and rear folding supports hot-dip galvanized * Axles, springs, air reservoir, and landing gear painted in black tone * Tires 285/70 R19.5 * Side board paintwork RAL 9010 pure white * Side wall paintwork available in RAL color of choice at additional cost * Vehicle is registered for one-day registration (never used) * Subject to errors and prior sale * Available immediately ex Egestorf

Koşul: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system, including RtR valve * Manometer pressure gauge for load weight determination (axles separated into two air suspension circuits) * Side underrun protection * Swing-out support legs at the rear of the chassis frame * Mechanically adjustable warning sign kits at front and rear * Front axle: plastic quarter mudguards with splash protection * Rear axle: straight galvanized steel mud flaps with splash protection * Reflective contour tape on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at the rear * 2 LED reversing lights (activated via reverse gear) * Drawbar with 50 mm towing eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of the turntable platform, approx. 490 mm long with 45° corners * Robot-welded anti-slip covering on the steel plate of the turntable platform * Load securing package consisting of: in front of the bulkhead carrier left & right each 1 x 13.4 t UVV lashing ring, on each side 4 holes in the turntable platform with 2 t lashing force each, 1 pair of lashing rings (13.4 t) suspended at the rear left & right in front of the rear cross member, on each side 4 pairs of swiveling and lowerable UVV lashing rings (10 t), loadable in all directions and recessed in the outer frame, on each side 3 stake pockets with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical fold-out extensions for 3 m overall width (not in the rear slope area) * Plank holder for extensions under the chassis left, longitudinal orientation * Excavator stick rest, from rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep, on each side 2 pairs of 6.4 t lashing rings in the excavator stick rest * Hardwood flooring on the running surfaces of the low loader platform * Hydraulically operated single-piece loading ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable * Outer planks of the loading ramps made of hardwood Fpsdpfx Ael Tnu Aeddeg * Steel structure pre-manufactured for 6-way control valve * Loading edge height unladen approx. 950 mm +/- 20 mm chassis * Turntable, fold-out extensions, mechanical supports, loading ramps all hot-dip galvanized * --Axles, air tanks, drawbar painted in black-- * Tyres: 235/75 R 17.5 * The vehicle has a day registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available immediately ex Egestorf

Koşul: ikinci el, azami yük ağırlığı: 10.870 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2025, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2023, Donanım: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizing unit * Height-adjustable drawbar, adjustable by approx. 300 mm, with 40 mm flanged towing eye * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted on the right side at the front of the chassis * 15-pin electrical connector * Multi-chamber tail lights * Screw-fastened underrun protection * Plastic quarter fenders * Net hooks located at the central locking housing and 2 pieces on the front wall * Chassis made of high-tensile fine-grain steel * Steel pallet tri-sided tipping body with continuous side walls reinforced at the top with internal pipes, without middle stakes, foldable with drop-side spring cylinders * Bolted rear stanchions * Combination steel double-wing rear doors, asymmetrically split, can be swung and locked at 270° (non-drop-down), with additional swing frame for automatic tailgate opening when tipping, rear locking by galvanized rotary latch and central locking, deactivation function for automatic tailgate when tipping backwards with opened wing doors * 1 x 5 t lashing ring in each corner, plus 4 x 3 t lashing points recessed in the outer frame on each side * 4 mm steel floor made from high-tensile fine-grain steel * Rear mounting rail for loading ramps * Reinforced superstructure with cargo securing certificate * 1 pair of aluminum loading ramps, approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tired & tracked vehicles * Lockable compartment for ramps, accessible from the rear and recessed under the loading area in the chassis * Chassis, drawbar, underrun protection, rear stanchion, and rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black * Tyres 285/70 R19.5 * Body painted RAL 9010 pure white * Side walls can be painted in any RAL color for an extra charge * Vehicle comes with day registration (without actual use) Fpedsl Th Duopfx Addeg * Errors and prior sale reserved * Immediately available ex works Egestorf

Koşul: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lifting and lowering function * Drawbar height adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal – no installation required on the truck side * 15-pin electrical connector * LED lighting * Front landing gear * Rear folding support legs * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor Fpodpfx Asl Th Dfjddsg * Provisions in front of the bulkhead and at the rear for retrofitting 20" container locks * Bolted bulkhead made of smooth sheet metal * Foldable side walls made of trapezoidal profile steel sheet, split once in the middle * Steel rear wall, can be inserted between the ramp holders; when not in use, stored inside at the bulkhead * Bolted rear stanchions * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t fall-arrest lashing eyes every 600 mm – four lateral lashing rings installed on each side * One 6.3 t lashing ring each at the front and rear corners * Profifix lashing rail along the longitudinal axis centerline for lashing up to LC 3000 daN * Various holes in the front and rear cross member for 1.2 t lashing options * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Approach angle at rear approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and landing gear painted in black tone * Side wall paintwork in a RAL color of your choice (no special or metallic finishes), changeable up to approx. 6 weeks prior to completion * --Reinforced and certified superstructure according to EN 12642 XL including load securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from approx. week 31 / 2026

Koşul: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lifting and lowering system * Height-adjustable drawbar, approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting * Front support winch * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the front wall exterior * Side underrun protection * Plastic quarter mudguards * 50 mm softwood flooring * Fixtures in front of the bulkhead and rear for retrofitting 20" container locks * Bolted smooth sheet metal front wall * Side walls made of steel sheet – trapezoidal profile – center-folding, split 1x * Steel rear wall, insertable between ramps, storage bracket inside front wall when not in use * Bolted rear stakes * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for installation of 3 t recessed lashing brackets every 600 mm – 4 lashing rings fitted on each side * 1 x 6.3 t lashing ring fitted in each front and rear corner * Profifix lashing rail, centrally aligned longitudinally for lashing up to LC 3,000 daN * Various holes in front and end cross members for 1.2 t lashing options * One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Rear ascent slope approx. 860 mm * Chassis, drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tank, drawbar eye, and support winch painted black * Side wall paintwork in a customer-specified RAL color (excluding special or metallic paintwork), color changeable up to approx. 6 weeks before completion * --Reinforced and certified body as per EN 12642 XL including load securing certificate-- Fedjl Thvxjpfx Addspg * New vehicle with manufacturer warranty * Subject to prior sale and errors * Available from approx. week 31 / 2026

Koşul: ikinci el, azami yük ağırlığı: 4.960 kg, toplam ağırlık: 10.500 kg, ilk tescil: 04/1993, bir sonraki muayene (TÜV): 01/2026, yükleme alanı uzunluğu: 6.260 mm, yükleme alanı genişliği: 2.430 mm, yükleme alanı yüksekliği: 2.430 mm, yükleme alanı hacmi: 37 m³, Donanım: ABS, hidrolik arka platform, 2-axle tandem refrigerated trailer, 7 m, with 1-ton tail lift * THERMOKING LND-II MAX (diesel engine) and standby cooling 380 V ELECTRIC * Vehicle no. for customer inquiries: 4593 * Tail lift * Air suspension * EBS (Electronic Braking System) * Anti-lock Braking System (ABS) Fedpfx Adjykxfledopg No liability for printing or typing errors Sale exclusively to business customers Subject to prior sale and errors. Changes, prior sale and errors expressly reserved. The description serves only as vehicle identification and does not constitute a warranty in the legal sense of a purchase. The description in the purchase contract is binding. * TOP SERVICE + QUALITY * We can provide a LEASING-FINANCING-HIRE PURCHASE offer * Warranty insurance available on request from the insurer * TÜV / UVV tail lift inspection / Tachograph testing and fitting of OBU unit by our local partners * 30-day export license plates available    All export documents possible, but must be requested separately individually * TOLL booking for Toll-Collect can be arranged in-house * Free transfer from Stuttgart Airport or Metzingen train station (Württ) * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit us on our website at * over 200 vehicles in stock at all times

Koşul: ikinci el, azami yük ağırlığı: 5.900 kg, toplam ağırlık: 9.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2020, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, yükleme alanı hacmi: 5 m³, Donanım: ABS, * ABS * 5 odacıklı arka stop lambaları Fpedjyncyhepfx Addsg * Yüksekliği ayarlanabilir çekici tertibatı * Gigant akslar * Ön destek makarası ---Üst yapı: Alçak platform römork, yaklaşık 870 mm yükleme yüksekliği, arkaya eğimli, yaklaşık 780 mm rampa yüksekliği, yay destekli çelik yan paneller (sağ ve sol), ahşap zemin, bağlama halkaları ve fiksatör halkaları. Yay destekli ve yana kaydırılabilir rampalar, kaymaz sıcak daldırma galvanizli kafes saclı (yaklaşık 2.600 mm uzunluğunda), arka destek rampanın kumandasıyla otomatik olarak entegre çalışır, plastik alet kutusu ön panelin önünde yer alır. Şasi, ön panel, çekme oku, arka panel, rampalar ve payandalar sıcak daldırma galvanizlidir. Satış sadece ticari işletmelere yapılır. İHRACATTA SADECE NET FİYAT ÖDENİR!!!!! TÜM BİLGİLER VE EKİPMAN+AKSESUARLAR GARANTİSİZ VERİLMİŞTİR. Tüm satış sözleşmeleri, faturalar, proforma faturalar, siparişler ve satış görüşmeleri için genel satış şartlarımız geçerlidir (İmpressum'a bakınız).

Koşul: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic brake system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Drawbar adjustable in height by approx. 300 mm * 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted exterior on bulkhead ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights Fsdpfel Tilxsx Addopg ----Cargo Area: * 50 mm softwood floor * 20" container locks, mounted at front and rear * Bolted smooth sheet steel bulkhead * Drop-down trapezoidal profile steel side walls with spring-assisted wall lifters * Bolted, hot-dip galvanized rear stakes ----Load Securing: * Perforated outer frame, bent at approx. 45°, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing brackets every 600 mm (5 lashing rings fitted on each side) * 1 x 6.3 t lashing ring at each front and rear corner * Various boreholes in the bulkhead and rear cross-member for 1.2 t lashing options ----Ramps: * 1 pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear-accessed storage compartment for ramps, integrated under the loading area within the chassis ----Paint / Finish: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Drop side color RAL 9010 pure white * Side wall painting in a RAL color of your choice available at extra cost ----Information: * New vehicle without registration * Subject to errors and prior sale ----Delivery Time: * Available immediately ex Egestorf

Koşul: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2010, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Vehicle is being sold on behalf of a customer. Some wooden planks are damaged. 17 pairs of lashing rings. Loading height approx. 900 mm. -- Typographical errors, mistakes and alterations reserved, sample images -- More data at: !, More Details: ! Fsdpfoy Ryb Nex Addepg

Koşul: yeni, süspansiyon: diğer, renk: diğer, vites türü: diğer, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Compartment for aluminium ramps, price per compartment, length approx. 2.48 m, width approx. 1 m, height approx. 27 cm. -- Subject to misprints, errors, and changes. Sample images -- For more details, see: ! Fjdpfx Adey Rr E Todjpg