Kullanılmış Blomenröhr Çalışma Platformlu Römork satın al (19.042)

Koşul: yeni, azami yük ağırlığı: 16.400 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPM Tire Pressure Monitoring * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11-ton BPW Eco axles * Air suspension with lifting and lowering system * SmartBoard as an information tool on the trailer, with pressure sensors for display of total axle load per axle group * Lateral underrun protection * Mechanically adjustable warning panel packages front and rear * Front: closed plastic mudguards, Rear: straight galvanized steel skirts, each with spray guards * Hinged (hot-dip galvanized) lid for the toolbox on the turntable platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm (black powder-coated), mounted on the right side * 15-pin power connector * LED lighting 12 / 24 V * Removable LED rotating beacon at the rear * Side marker lights with indicator control * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * Tire pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck) * Rubber covering on folding ramps and on the entry slope left and right (approx. 860 mm long) * Rubber covering on longitudinal beams from front to rear crossmember * Hardwood flooring on running surfaces of the low-bed platform * Four stake pockets on each side, with simultaneous 2-ton lashing capability per pocket * Load securing package comprising: 5 pairs UVV lashing rings, swiveling and retractable, loadable from all directions and recessed in the external frame - in the corners 13.4 tons, otherwise 10 tons * 6 pairs of mechanical folding outriggers for total width of 3 meters (not on the rear slope) * Plank holders under the loading area, longitudinal alignment * Raised roller stop in front of the front crossmember, with 1 x 6.4-ton lashing ring on each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves * Hydraulic lateral ramp displacement * Hydraulic rear support (single-stage cylinder) * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 up to max. 140 l/min) * Hydraulic control block, splash-proof * Two-line hydraulic system * Loading area above turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm entry slope) * Loaded platform height: approx. 890 mm +/- 20 mm (with air suspension) * Chassis, turntable, roller stop, folding extensions & access ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks etc. painted in black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 20/2026 Gbedpfx Aaoq Dyvcj Nsl

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: W09K35135G1KB6013, Üretim yılı: 2016, çalışma saatleri: 1.823 h, TÜV geçerlilik süresi 08/2026'ya kadar, istenirse yeni alınabilir. Uygun aksesuarlar dahil: kıskaç, moloz kovası, askılı kafes. Gbodpfx Aajyt Hhms Nol

Koşul: ikinci el, toplam ağırlık: 34.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2020, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2020, Donanım: ABS, 12174 SCHWARZMÜLLER 3-Axle Flatbed Semi-Trailer RH 80 / CONTAINER / STAKE POCKETS / SAF / LIFT AXLE Manufacturer: SCHWARZMÜLLER First registration: 10.2020 Dimensions: 13,600 x 2,480 mm Gross vehicle weight: 34,000 kg Unladen weight: 6,580 kg Kingpin load: 12,000 kg Mileage: 162,000 km Axle make: SAF disc brakes Lift axle Anti-slip plywood floor Toolbox External paint: red Body paint: white Chassis paint: red Tyres: 6 units Tyre condition: 9/10/6/6/7/11 mm Rear axle tyres: 385/55 R 22.5 Robust flatbed semi-trailer with stake pockets and 6 pairs of container locks Container fittings: 1 x 40 ft / 2 x 20 ft / 1 x 20 ft central / 1 x 30 ft Multi-lock outer frame SAF disc brakes 430 mm / lift axle Front wall height: 2,400 mm Coupling height: 1,130 – 1,220 mm Stake pocket set distributed as 9 units on the loading area Stake size: 80 x 80 mm 23 pairs of lashing rings on the loading area Gsdexubiyspfx Aa Nebl Only 162,000 km mileage 4 x toolboxes Extension boards Outer frame repainted All information subject to change; prior sale reserved! If you have any questions about this or other vehicles, please call us.

Koşul: ikinci el, ilk tescil: 03/2002, bir sonraki muayene (TÜV): 03/2027, Donanım: ABS, Yalnızca ihracat için Satış sadece yurtdışına Gbsdpfx Aey Dmq Dea Njl SPR 324 Kotschenreuther 3 dingil

Koşul: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring * Emergency release device for spring-actuated cylinders * Drum brakes * 2 x 11 ton Gigant axles * Air suspension with lifting and lowering function * Fixture in front of the bulkhead and rear slant for retrofitting container locks for transporting 20" containers * Drawbar with 50 mm flange tow eye and height-adjustable drawbar * Jost landing gear at the front * External folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED lights * 21 ton GVW design with reinforced frame and reinforced axles * Reinforcement package on the chassis for drill rig transport * 50 mm softwood floor, clamped design * Fixture on the front bulkhead for optional retrofitting of container locks * Bolted smooth steel sheet front wall * Split, trapezoid-profiled steel side walls, foldable with middle drop-in stanchion * Steel rear wall, can be inserted between the ramps – storage bracket inside the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45° angled, with 2 ton lashing capacity every 480 mm * Option for installing 3 ton folding lashing brackets every 600 mm * Profifix lashing rail centrally along vehicle axis for lashing up to LC 3000 daN Godpfx Aaol Tihxo Nobl * In each corner front and rear: 1 x 10 ton lashing ring * Lashing package with 2 x 8 ton retractable lashing rings per side in the outer frame, various drillings in the front and rear crossmember for 1.2 ton lashing options * One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (collapsible down to 20 mm) * Rear ramp angle approx. 860 mm chassis height * Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black tone * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Side wall paintwork in a RAL color of your choice (no special or metallic colors), changeable up to approx. 6 weeks before completion * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 29 / 2026

Koşul: ikinci el, azami yük ağırlığı: 1.007 kg, toplam ağırlık: 1.500 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 03/2026, yükleme alanı uzunluğu: 3.070 mm, yükleme alanı genişliği: 1.870 mm, yükleme alanı yüksekliği: 100 mm, toplam genişlik: 1.960 mm, toplam yükseklik: 925 mm, A66 GW26NG000373 100 km/saat onayı Platform treyler Destek tekeri Yükleme rampaları Hatalar ve ara satış hakkı saklıdır. Gbodpfx Aaeyq U Ene Nol

Koşul: ikinci el, azami yük ağırlığı: 37.420 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2015, yükleme alanı uzunluğu: 16.900 mm, yükleme alanı genişliği: 2.540 mm, toplam genişlik: 2.540 mm, toplam yükseklik: 3.000 mm, Üretim yılı: 2015, Donanım: ABS, HRD SPTM4A Mega Telescopic Semi-Trailer Serial Number: W09SPTM4NFEN10031 First Registration: 24-03-2015 Gjdpfexzmg Rsx Aa Nsbl SAF Axles Lifting Axle 2 Trailing Steerable Axles Drum Brakes with ABS and EBS Air Suspension Tyres: 235/75 R17.5, 40% Gross Weight: 48,000 kg, Unladen Weight: 10,420 kg, Payload: 37,420 kg Total Loading Length: 1,290 cm + 400 cm extendable Loading Floor Height: 95 cm Aluminium Loading Ramps Total Trailer Length: 13.30 m, Width: 2.54 m, Height: 3.00 m Container Twist Locks for 2x20 ft, 1x40 ft, 1x20 ft in the middle Lashing Eyes Stake Pockets Errors / typing mistakes and prior sale excepted.

Koşul: ikinci el, azami yük ağırlığı: 15.250 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2007, ? Balast platformu Gbsdpfx Aow Sqi Esa Nel ? 50 mm çekme halkası ? 5 x sabitleme halkası ? Davul fren ? Yaprak süspansiyon ? Destek ayakları ? BPW akslar Tüm bilgiler garanti verilmeden sunulmuştur / Ara satış hakkı saklıdır.

Koşul: ikinci el, azami yük ağırlığı: 13.860 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2022, yükleme alanı uzunluğu: 6.770 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 600 mm, yükleme alanı hacmi: 10 m³, Donanım: ABS, ? galvanizli şasi ? alçaktan bağlı ? 50 mm çekme halkası ? konteyner kilidi ? her iki tarafta 12 bağlama halkası Gedsxb Ig Sjpfx Aa Njbl ? geri görüş kamerası ? kampana fren ? duomatic bağlantı ? ABS ? havalı süspansiyon ? alet kutusu ? EBS ? destek ayakları ? ikiz lastik ? BPW akslar Tüm bilgiler taahhütsüzdür / ara satış hakkı saklıdır.

Koşul: ikinci el, azami yük ağırlığı: 15.250 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 12/2008, ? Platform for ballast weights ? 50 mm towing eye ? 4 x lashing eyes ? Drum brake ? Leaf suspension ? Support legs ? BPW axles Godpfxjwfk R De Aa Nobl All information subject to change without notice / Prior sale reserved.

Koşul: ikinci el, TÜV ve geçerli UVV mevcut. Vergi dahil bir fatura düzenlenecektir. KDV gösterilebilir. Sadece trafikten çekilmiş olarak teslim edilir. Gbodpfjy A Ratex Aa Nol

Koşul: ikinci el, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2018, yükleme alanı uzunluğu: 13.720 mm, yükleme alanı genişliği: 2.540 mm, toplam genişlik: 2.540 mm, Donanım: ABS, Vehicle Identification Number: YAFSR3001J0021353 TELESCOPIC EXTENSION up to 8,200 mm with sliding table WADER CONTAINER POCKETS for 1 x 20", 2 x 20", 1 x 40", 45" container in extended position Gbsdpsyw Dl Esfx Aa Nol German Inspection (DE HU) valid until 02/2027 – Safety Inspection (SP) until 08/2026 SAF axles with drum brakes 3 hydro-mechanically forced-steered axles on turntable with cable control and radio remote control Automatic tracking Platform dimensions: 13,720 mm – loading height: 1,100 mm Fifth wheel height: 950 – 1,050 mm Rear steering radius: 2,100 mm Stake pockets in the floor, including stakes (completeness not guaranteed) NATO socket Electro-hydraulic power pack Width marker lighting Toolbox Central lubrication system Tyres: 235/75 R 17.5 Spare wheel carrier WITH spare wheel Specifications, prior sale, and errors are expressly reserved. The description serves for general vehicle identification and does not constitute a warranty in the legal sense of purchase law. The specification in the purchase contract is decisive. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide a quote from our partner workshops! The vehicle may be covered and/or labeled with advertising. Our general terms and conditions of delivery and payment apply.

Koşul: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, toplam yükseklik: 1.250 mm, Donanım: ABS, MAX Trailer Typ 210 NEW | Hydraulic Steering – Extendable | 36t Payload | 3 Axles | from €76,900,-- New vehicle – individually configurable for your specific application. High payload thanks to robust design and maximum cost efficiency. ----Highlights: • Extendable loading platform with pneumatic locking • Numerous high-strength lashing points for optimum cargo securing • Hydro-mechanically forced-steered BPW axles with disc brakes • Air suspension with lifting and lowering function • WABCO EBS brake system in accordance with EU regulations • Mechanical JOST landing legs with two-speed gearbox • LED lighting system • Tyre pressure monitoring system (TPMS) ----Construction & Durability • High-strength fine-grained steel construction • Metallized chassis with premium corrosion protection • Multi-layer paintwork with additional cavity sealing • Durable hardwood flooring in sturdy omega profiles ----Included Options • Convenient electronic forced steering via cable remote control • Electro-hydraulic power unit • Galvanized front wall (approx. 1,200 mm) • EN 12642-XL body • 10 pairs of stanchion pockets for flexible load securing • Spare wheel holder under the platform Gbedpfsypaz Ssx Aa Nol • Beacon holder • Reflective tape & European reflector boards • Air couplings at the front ----Further equipment and individual adaptations available at any time – we will configure your vehicle precisely according to your requirements. Sample photo. Equipment may vary depending on configuration.

Koşul: yeni, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, New vehicle / stock vehicle / incoming? Also available as MEGA version / from €24,200-- For sale is a Wielton Platform Master semi-trailer, designed for heavy-duty and flexible use in building materials, steel, and long goods transport. The vehicle is available in standard body height and optionally as a MEGA version. Note: The following equipment describes a current stock or pre-ordered vehicle. Deviations may occur depending on the specific vehicle, production status, or individual customer configuration. ----Chassis / Frame Double longitudinal frame with welded cross members and outer frame * Welded structure made of high-strength S700 steel * Perforated outer frame with continuous lashing options * SAFETY LOCK system: approx. 60 lashing holes per side * Designed for fifth wheel height 1,120 mm (MEGA version with reduced fifth wheel height optionally available) * 19 pairs of lashing rings, 2.0 t each, in the outer frame * 26 stanchion sockets, 81 x 81 mm, as per drawing * Workspace according to ISO 1726:2003, weight-optimized design ----Axles and Running Gear 3 axles, each 9,000 kg payload * SAF axles with air suspension and disc brakes (ET120) * Brake discs Ø 430 mm * 1st axle as a lift axle * 2 kingpins, dimension 2,040 mm * 2 mechanical landing gears, SAF brand * Single-sided landing gear operation, right side ----Chassis Accessories 2 plastic wheel chocks with holders * Telescopic access ladder at the rear with large tread surface, compliant with UVV * Large rubber bumpers, steel reinforced on the sides, at rear end frame * Side underrun protection according to ECE R73 made of lightweight composite material * Rear underrun protection made of steel according to ECE R58 * FULL PVC mudguards * 2 PVC toolboxes, each 165 liters * 12 plug-in stanchions, 80 x 80 mm, length 1,500 mm * 12 stanchion holders * Spare wheel holder omitted * Extendable width indicator panels ----Brake System / Pneumatics Brake system according to ECE Directive * Dual-line compressed air brake system, WABCO brand, ADR-compliant * WABCO EBS system 2S/2M with RSS * Raise and lower device * Brake line connections at the front ahead of the bulkhead * Standard air connections according to ISO * Aluminum air tanks ----Lighting and Electrics Lighting bar made of composite material * 24 V lighting system according to ECE R48, Aspöck EP III brand * 2 seven-chamber multifunction tail lights * LED license plate lighting * 2 LED outline marker lights * LED side marker lights * 2 x 7-pin + 1 x 15-pin connectors at the front including EBS socket (without connection cables) Gbedpfx Aaeypa Aie Nsl * Electrical installation and preparation for rotating beacon * 2 additional LED reversing lights ----Wheels and Tyres 6 x 385/65 R 22.5 tyres * 6 x steel rims 11.75 x 22.5, ET120 * Premium tyres BRIDGESTONE ECOPIA H002 M+S * Protective caps for wheel nuts ----Floor 30 mm phenolic plywood floor, multiply bonded, non-slip and waterproof, premium Koskisen brand * Sealed cut edges * Continuous edge bonding * Driveable by forklift up to 7,500 kg axle load ----Body Front bulkhead 1,800 mm high * Front bulkhead and front corner pillars made of natural aluminum ----Painting / Colour Specifications All steel elements twice blasted * KTL primer for optimum corrosion protection * Dust-free robot topcoat painting * Frame: RAL 7021 black grey / anthracite * Landing gears: Black, powder-coated * Axles: Black * Rims: Silver * Wheel hubs: Black * Side underrun protection: White * Rear lighting carrier: White *

Koşul: yeni, toplam ağırlık: 43.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, toplam yükseklik: 1.250 mm, Donanım: ABS, WEB Trailer PRSH 27 NEW – Platform Semi-Trailer | Hardwood Floor | Container-Compatible | for €30,500 !!! New vehicle – individually configurable according to your application requirements. Robust platform semi-trailer with hardwood floor for a wide range of transport tasks. Gbsdpfx Aeypa Iloa Njl Suitable for container transport (20 ft / 40 ft) as well as classic general cargo and machinery transportation. ---Highlights--- – Platform semi-trailer with 27 mm hardwood floor – Container-compatible: 1×40 ft / 1×20 ft centered / 2×20 ft – Single tires R22.5 – High lashing forces – certified lashing points – Lift axle with starting aid – Durable WEB-Trailer quality for everyday use ---Technical Data--- – Chassis length: approx. 13,510 mm – Chassis width: approx. 2,540 mm – Unladen ride height: approx. 1,250 mm (at 1,120 mm fifth wheel height) – Max. king pin load: approx. 16,000 kg – Axles: 3 × 9,000 kg, disc brakes – Axle spacing: 1,310 / 1,310 mm – Tires: 385/65 R22.5 ---Standard Equipment--- – IPE 80 cross members, spacing approx. 400 mm – Outer frame U-profile 160×120×5 mm – Lashing bars top & bottom every 1,200 mm, certified (5 t) – 8 pairs of stake pockets 80×50 mm – 6 pairs of container locks (twistlocks) – Front wall 1,200 mm, sheet metal cladding – Holder for plug-in side posts on the front wall – 24 t telescopic landing gears – EBS brake system – Lift axle (1st axle), automatic with starting assistance – LED lighting system 24 V, 15-pin – Rear underrun protection, rectangular tube – Rear access ladder with platform ---Floor & Load Securing--- – 27 mm hardwood floor in omega profiles – Weatherproof floor for open platforms – Certified forklift axle load 9.0 t according to DIN EN 283 – Extensive lashing options for flexible loads ---Included Options--- – Extendable warning panels red/white (rear & landing gears) – Large angled lamp plate – Open toolbox made of perforated sheet metal – License plate lighting & lane marker lights – Color: front wall RAL 9006 silver – Chassis MB 7350 Novagrau – KTL coating with zinc phosphating + powder coating Other equipment and custom modifications available at any time – we configure your trailer exactly to your specifications. Sample photo. Equipment may vary depending on configuration.

Koşul: yeni, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, New vehicle / Stock vehicle / Incoming? Also available with individual configuration / from €29,900 -- For sale: Wielton building material semi-trailer, designed for professional use in building material and general cargo transport. Note: The equipment listed below refers to a current stock or pre-ordered vehicle. Variations are possible depending on the specific vehicle, production status, or individual customer configuration. ----Chassis * Loading floor made of 30 mm phenolic plywood, load capacity 7.5 t * Steel light carrier, 371 mm * 19 pairs of lashing rings, each 2.0 t * Rubber-steel rear protection buffers * Foldable rear underrun protection * Rear underrun protection made of steel * Side guard made of aluminum ----Axles and suspension * 3 rigid axles * SAF disc brake axles, 3 × 9,000 kg, 22.5" INTRADISC * 1st axle liftable * No axle lift on 3rd axle * Fifth wheel height approx. 1,120 mm ----Landing legs * SAF Hercules 2-speed landing gear, full load capacity ----Mudguards * PVC mudguards, half-shell design, 2 front / 2 rear ----Rims * 6 × steel rims 22.5 × 11.75, ET-120 * Protective caps for wheel nuts * No spare wheel rim ----Tyres * 6 × 385/65 R 22.5, manufacturer’s choice Options: - GOODYEAR KMAX G2 T M+S 3PMSF Rolling resistance: B | Wet grip: C | Noise: 71 dB - BRIDGESTONE Ecopia H-TRAILER 002 M+S 3PMSF Rolling resistance: A | Wet grip: B | Noise: 68 dB * No spare tyre ----Other chassis features * 2 × toolboxes, each 165 l * Spare wheel holder * Extendable width indicator boards ----Body * Front wall H = 1,800 mm, with galvanized protective sheet up to the upper edge * Side walls 1,000 mm * Bolted side walls * Fold-down tailboard ----Brake system / Pneumatics * WABCO brake system with basic modulator * RSS / RSP * Aluminium air tanks Gbjdpfx Asypa A Aja Nsl * RTR automatic self-levelling * Brake system by WABCO or Knorr with H-S valve ----Electrical system * Full LED lighting Aspöck ECOLED II * Flashing side marker lights * 2 LED reversing lights * 2 × 7-pin + 1 × 15-pin connectors incl. EBS socket * No connection cables to the tractor unit ----Paint / Surface * Frame hot-dip galvanized, unpainted * Side walls anodized, unpainted ----Additional systems * ABERG TPMS tire pressure and temperature monitoring - Sensors on the rims - Control unit connected to EBS - Developed for semi-trailers and trailers ----Markings * Partial contour marking with Wielton logo * Sides white, rear red * Wielton warning stickers * Vehicle designation in German ----Further equipment and individual modifications available at any time — we configure your vehicle exactly according to your requirements. Sample photos. Equipment may vary depending on configuration.

Koşul: yeni, azami yük ağırlığı: 37.500 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, toplam yükseklik: 1.250 mm, Donanım: ABS, MAX Trailer Type 200 NEW | Extendable | 37t Payload | 3 Axles | from €57,000 New vehicle – configurable individually to suit your application. High payload with robust construction and maximum cost efficiency. ----Highlights: • Extendable loading platform with pneumatic locking • Numerous heavy-duty lashing points for optimal cargo securing • BPW air-suspended axles with disc brakes and raise/lower function Gsdpsypazxefx Aa Njbl • Self-steering axles with electro-magnetic reverse lock • WABCO EBS brake system complying with EU regulations • Sturdy steel frame with high-quality corrosion protection • LED lighting system • Mechanical JOST landing legs with 2-speed gearbox • Tire Pressure Monitoring System (TPMS) ----Construction & Bodywork • High-strength fine-grain steel construction for long service life • Metallized chassis with additional cavity sealing • Multi-layer paint finish for optimal protection • Durable wooden flooring in stable omega profiles ----Included Options • Galvanized front wall (approx. 1,200 mm) • Spare wheel carrier under the loading platform • 10 pairs of stake pockets for flexible cargo securing • EN 12642-XL bodywork • Reflective tape & European reflector plates • Holders for warning signs incl. socket • Beacon brackets • Air couplings at the front ----Additional equipment and individual customizations available at any time – we configure your trailer precisely to your requirements. Sample photo. Equipment may vary depending on configuration.

Koşul: ikinci el, azami yük ağırlığı: 29.550 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2014, yükleme alanı uzunluğu: 13.630 mm, yükleme alanı genişliği: 2.460 mm, Donanım: ABS, KALDIRMA AKS, MULTILOCK Daha fazla bilgi için lütfen arayın: +420734511212 Gbsdpfxsydgzns Aa Njl

Koşul: yeni, azami yük ağırlığı: 30.250 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.480 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Krone Profi Liner (SDP 27 MEGA) _____ Details • Internal loading length: 13,620 mm • Internal loading width: 2,480 mm • Fifth-wheel height: 980 mm • Multilock outer frame with universal load securing points every 100 mm _____ Axles/Tyres • BPW axles • Air suspension • Wheelbase: 1,310 mm • Brake discs (370 mm diameter) • Wheel nuts with protective caps • 1st axle as lift axle • Tyre monitoring system • KM counter _____ Attachments • Toolbox • 10 pairs of stake pockets 81 x 81 mm on outer frame • 15 pairs Multi Lash lashing rings • 10 stake pockets 81 x 81 mm centered in the floor • 12 insertable stakes, total length approx. 1,950 mm • 12 insertable stakes, total length approx. 1,950 mm • 30 mm thick waterproof plywood floor _____ Accessories • 2x oversize signs incl. clearance lights • Side-mounted stake holder on left for 12 insertable stakes _____ Lighting • Multifunction rear lights (Hella) • 2x LED license plate lights • LED side marker lights, flashing • Rotating beacon (orange) • incl. 1 reversing spotlight _____ Paintwork Gsdon Hrtkepfx Aa Nobl • Chassis: RAL 9005 – deep black • Rims: natural silver • Landing legs: RAL 9005 – deep black • Axles: RAL 9005 – deep black • Front wall: RAL 7035 – light grey

Koşul: yeni, azami yük ağırlığı: 15.825 kg, toplam ağırlık: 20.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.550 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, Donanım: ABS, Our complete range of vehicles, including those available for immediate or short-term delivery, can be found on our website. This is an excerpt from the equipment features. Full equipment details available on request. Chassis: * Steel welded construction with welded longitudinal beams and punched Z-cross members, narrow cross member spacing for high floor load capacity * Ramp storage between the longitudinal beams behind the axle assembly, two insertion pockets for drive-on ramps under the loading floor, closure plate in the rear head frame Underrun Protection: * In accordance with EU regulations Front Landing Legs: * Single-sided operated landing legs Rear Support: * Two adjustable drop-down supports Axles: * 2 x 10 t air suspension axle unit, SAF make, drum brakes approx. 300 x 200 mm, wheel connection with center mounting for twin tyres, ABS, total air suspension lift approx. 200 mm, lift approx. 140 mm, lower approx. 60 mm, controlled by manual lever with detent function Tyres: * 8-fold, 235/75R 17.5 - make at our discretion, mounted on steel rims 6.75 x 17.5, with offset Splash Protection: * PVC splash guards in front of and behind the axles in accordance with EU regulations Load Securing: * Drill holes for lashing straps every approx. 150 mm on the outer frame, lashing capacity approx. 2.5 t (lashing straps can be hooked in even with drop sides closed, chamfered outer frame) * 6 pairs of folding lashing rings, evenly distributed, lashing capacity approx. 8 t * Stake pockets for 80/50 plug-in stakes: 3 pairs of stake pockets evenly distributed on the outer frame Brake System: * Pneumatic brake system in accordance with EU with EBS * Two coiled connecting lines to the towing vehicle with red/yellow coupling heads * Spring-loaded parking brake on one axle Floor: * Approx. 28 mm Z-hardwood floor flush-fitted in the outer frame Front Wall: * Detachable 25 mm drop side Lighting System: * Lighting system in accordance with EU regulations, 24 Volt, multi-chamber rear lights, license plate lights, side marker and outline lights at the rear, terminal box on the left of the drawbar including connection cable with 15-pin and 2 x 7-pin connectors Accessories: * 2 wheel chocks with holders * Detachable beacon at the rear * Delivery includes an additional 40 mm towing device (GVW max. 13,500 kg) Paintwork: * Chassis shot-blasted, cleaned and high-quality hot-dip galvanized according to the latest technological standards * Superstructure parts cleaned, primed, and hot-dip galvanized Chassis: * Hot-dip galvanized + RAL 3002 carmine red * Drop sides: RAL 3002 carmine red * Kinnegrip stakes: RAL 3002 carmine red * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Mounted parts: galvanized / KTL black Contour Marking: * In accordance with EU, yellow on sides and rear Including Special Equipment: * Rear extension by approx. 800 mm including underrun protection, extendable loading platform, load capacity approx. 2 t, locking at approx. 200 mm intervals * Mechanically length-adjustable rigid drawbar, 6 x approx. 100 mm increments, with bolted towing eye approx. 50 mm as per DIN 74053 * 4 rows of stake pockets across the loading area, evenly distributed * 12 plug-in stakes made of galvanized tubular steel, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1x20' container, extendable to approx. 2,820 mm, according to ISO 1496, EN 284, or EN 452 Godpfjy Auhbox Aa Nebl * 1 pair of aluminum loading ramps, load capa

Koşul: yeni, azami yük ağırlığı: 32.155 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Selection of features. Full specification on request. Chassis: * Welded structure made of high-quality steel profiles with punched profile cross members. Designed for high point loads. Coupling system: * Fifth wheel plate with 2-inch kingpin. Underrun protection: * In accordance with EC regulations, bolted design. Side underrun protection: * In accordance with EC regulations. Landing legs: * 2 x 12 t landing legs with compensating foot and single side operation (right side in direction of travel). Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, centered wheel hub ET120, ABS, total air suspension travel approx. 180 mm (lifting approx. 110 mm, lowering approx. 70 mm) * Air suspension controlled via manual control valve with stop function. Steering: * Last axle forced-steered via rod linkage. Axle lift: * First axle liftable, with fully automatic load-dependent lift control. Brake system: * Two-line pneumatic brake system according to EC with EBS and RSS, automatic load-sensing control, spring-loaded cylinders for parking brake, anti-interchange couplings mounted fixed to front cross member, no connecting line to tractor unit. * Manufacturer: Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 ET 120 rims – brand of our choice. Incl. tyre pressure monitoring, tyre pressure display in cab (prepared by vehicle manufacturer). Mudguards: * In accordance with EC regulations, 1/4 PVC mudguards front and rear of axle units. Load securing: * 9 pairs of foldable lashing rings, evenly distributed (traction force approx. 8.0 t) * 8 pairs of foldable lashing rings, evenly distributed (traction force approx. 2.5 t) * External frame features a lashing point approx. every 500 mm for tension belts (lashing can be applied with side walls closed; outer frame with chamfered design). Stake pockets: * 10 pairs of stake pockets evenly distributed in outer frame * 4 rows of transverse stake pockets across the loading area * Plug-in stanchions: 20 pcs, galvanized pipe approx. 80/50 mm, total length approx. 1,000 mm * Magazine for 20 plug-in stanchions mounted inside front bulkhead. Gbedoy Auhzepfx Aa Nel Front bulkhead: * Reinforced fixed steel construction, interior paneled with approx. 9 mm phenolic plywood (height approx. 1,250 mm) Floor: * Approx. 28 mm Z-hardwood floor recessed into the outer frame. Sideboards: * 4 x 25 side panels and rear wall made from anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stanchions. * Sideboard and stanchion magazine: under chassis * Insertion rails on left and right for sideboards and stanchions Lighting system: * In accordance with EC regulations, 24 Volt with multi-chamber lights, LED side marker lamps, LED front position lamps (white), LED rear outline lamps, license plate lamps * 1 x 15-pole and 2 x 7-pole socket connections on front cross member. Equipment: * Two wheel chocks with holders * Warning boards according to ECE 70 * Work light mounted on light bar (switches on via reverse gear) * Holder for beacon at rear incl. beacon * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm Painting: * Chassis and front bulkhead cleaned by sandblasting, primed and finished in a single color * Chassis: hot-dip galvanized + RAL color of choice * Front bulkhead: RAL color of choice * Sideboards: anodized aluminum * Front bulkhead stanchions: hot-dip galv

Koşul: yeni, azami yük ağırlığı: 38.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete inventory of vehicles, including immediately and short-term available vehicles, on our website. Partial list of equipment. Full specifications available on request. EQUIPMENT: * Gooseneck, approx. 4,100 mm length, with central beam * Extendable loading platform, approx. 9,400 mm length, with rear bevel approx. 350 mm x 10° and integrated mounting rail for attaching loose aluminum loading ramps * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length * Technical fifth-wheel load: 18,000 kg * Suitable for tractor units: 4 x 2 and 6 x 2 * TPMS tire pressure monitoring system compliant with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced-steered, mounted on turntables * Technical axle load: 12,000 kg per axle * Air suspension with lift/lower valve * 235/75 R 17.5 3PMSF twin tires, brand of our choice * ASPÖCK-UNIBOX * 3 kW electro-hydraulic unit for hydraulic system operation. Supply connections on the tractor unit not installed * 4 pairs of recessed lashing rings in the gooseneck outer frame: - the three front pairs installed horizontally (LC 10,000 daN) - the rear pair foldable outward (LC 10,000 daN) * 4 pairs of stake pockets recessed into the gooseneck outer frame for plug-in stakes approx. 100 x 50 mm * 2-inch kingpin * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * On gooseneck and loading platform approx. 32 mm wooden floor encased in ALU omega profiles * 10 pairs of horizontally recessed, foldable lashing rings in the loading platform outer frame * 1 pair of lashing rings (LC 10,000 daN) in front of the last axle and at the rear cross member * All other lashing rings (LC 5,000 daN) * 6 pairs of stake pockets recessed into the loading platform outer frame for plug-in stakes approx. 100 x 50 mm * 1 spare wheel holder under the platform on the right side in direction of travel * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the platform on the left side in direction of travel * Bevel at the vehicle’s rear cross member, approx. 350 mm x 10° * Integrated mounting rail for loose ALU loading ramps at the vehicle’s rear cross member * 1 pair of drop tube supports at the rear cross member * Remote steering from front and rear via cable remote control, with single-track control of axles (no installation in the tractor unit) * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * 1 LED work lamp each left and right on the front wall, wired to the connection panel for the tractor unit * One locking point on the extension, every approx. 500 mm * Holder for plug-in stakes on inside of gooseneck front wall when not in use * 4 wheel chocks with holder under the loading platform * Extendable galvanized platform wideners approx. 230 mm per side (without timber floorboards) * 1 LED work lamp each left and right in front of axles, wired to the tractor unit connection panel Gsdpfxey Augdo Aa Njbl * 2 axle load gauges mounted on the left side including axle load chart * 1st axle with starting aid * Under the gooseneck and at the rear end cross member left and right, each with mounting bracket for warning plates * Acoustic warning signal when reversing * EU reflector at the rear of the vehicle

Koşul: yeni, azami yük ağırlığı: 16.180 kg, toplam ağırlık: 20.500 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.480 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specifications. Full specifications available upon request. Chassis: * Steel welded construction made from welded longitudinal beams and inserted Z-crossmembers, closely spaced crossmembers for high floor load capacity * Ramp storage: Two insertion pockets for each one loading ramp located between the longitudinal beams behind the axle assembly below the loading floor, with cover plate in the rear end frame Underrun protection: * According to EU regulations Landing legs: * Front: Landing legs operable from one side * Rear support: Two adjustable drop-down legs Axles: * 2 x 10 t air suspension axle assembly, SAF brand, drum brakes approx. 300 x 200 mm, center-location for twin tyres, ABS, total air suspension travel approx. 200 mm (comprising approx. 140 mm lift and 60 mm lowering), control via lever with detent function Tyres: * 8-fold, 235/75 R17.5 – make at our discretion, mounted on 6.75x17.5 rims with offset Mudguards: * PVC, fitted in front of and behind the axles according to EU specifications Load securing: * Perimeter frame with tie-down points approx. every 150 mm for lashing straps, tensile strength approx. 2.5 t * 6 pairs of foldable lashing rings evenly distributed, tensile strength approx. 8 t each * Stake pockets for removable stakes 80/50: 3 pairs of stake pockets in the outer frame, evenly distributed Braking system: * Pneumatic braking system in accordance with EU requirements with EBS * Two spirals for connection to the tractor unit, with red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm Z-hardwood floor recessed in the outer frame Lighting: * Lighting system according to EU standard, 24 Volt, multi-chamber tail lights, license plate lights, side marker lights and lane marker lights at the rear, connector plate on the left at the towing bar, incl. connection cable with 15-pin and 2 x 7-pin plugs Accessories: * 2 wheel chocks with brackets * Detachable rotating beacon at the rear * 40 mm towing device supplied (max. GVW 13,500 kg) * Rear extension approx. 800 mm incl. underrun protection, extendable loading platform, load capacity approx. 2 t, locking at approx. every 200 mm * Mechanically adjustable fixed drawbar, 6 x approx. 100 mm increments, with bolted 50 mm towing eye according to DIN 74053 * 4 rows of stake pockets across the loading area, evenly distributed * 12 galvanized pipe removable stakes, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1 x 20' container * Extendable container locks for 1 x 20', extendable to approx. 2,820 mm, according to ISO 1496, EN 284, or EN 452 Gbjdpfx Ajy Auf Tea Nol * 1 pair of aluminum loading ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles Paintwork: * Chassis shot-blasted, cleaned, and hot-dip galvanized to the latest industry standards * Superstructure parts cleaned, primed, and hot-dip galvanized * Chassis: Hot-dip galvanized + RAL 9011 graphite black * Outer frame: Hot-dip galvanized + RAL 9010 pure white * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Mounted parts: galvanized / KTL black

Koşul: ikinci el, toplam ağırlık: 50.100 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 12/2019, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.540 mm, toplam genişlik: 2.540 mm, Donanım: ABS, Vehicle Identification Number: YAMT23XX1K0104335 Gbsdoywqdujpfx Aa Njl TELESCOPIC EXTENSION up to 7,300 mm CONTAINER POCKETS WADER for 1 x 20", 2 x 20", 1 x 40", can be extended for 45" container German MOT (HU) valid until 02/2027 – Safety Inspection (SP) until 08/2026 SAF axles with drum brakes 3 hydraulically/mechanically forced-steered axles with cable control + radio remote control Platform dimensions: 13,500 mm (including 500 mm tapered section) – loading height: 1,100 mm Fifth wheel height: 950 – 1,050 mm Rear steering angle: 2,100 mm Stake pockets in the floor, including stakes (completeness not guaranteed) NATO socket – electro-hydraulic unit Width marker illumination Toolbox Central lubrication system Tyres: 235/75 R 17.5 Spare wheel holder WITH spare wheel Specifications subject to change, prior sale, and errors excepted. This description serves for general identification of the vehicle and does not constitute a warranty as defined by commercial law. The purchase contract description is legally binding. Our offer generally does not include a new MOT (TÜV) inspection. If a new MOT inspection is required, we are happy to provide a quote from our partner workshops. Vehicle may have advertising stickers or lettering. Our general terms and conditions of delivery and payment apply.

Koşul: ikinci el, azami yük ağırlığı: 949 kg, toplam ağırlık: 1.300 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 02/2026, yükleme alanı uzunluğu: 4.010 mm, yükleme alanı genişliği: 188 mm, yükleme alanı yüksekliği: 110 mm, toplam genişlik: 2.450 mm, toplam yükseklik: 860 mm, A13 GW2616429 Multitransporter 4018, Üretici TEMARED, Tip DMC. Toplam ağırlık: 1300 kg, 400x184 cm, frenli, 100 km/s (aksesuar), katlanabilir yükleme rampası ile (aksesuar), alçak şasi, indirilebilir. Yükleme yüksekliği 400 mm. Hatalar ve ön satış hakkı saklıdır. Gbsdpfxoym Igdj Aa Njl