Çalışma platformlu römork

MÜLLER-MITTELTAL T3 Tiefl., Luft., Schwarzdeckentransporte

Durumu: yeni, azami yük ağırlığı: 16.400 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2024, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 11 t BPW Eco axles Todpfetplv Nsx Af Sed * Air suspension with lifting and lowering function * SmartBoard as an information tool on the trailer, with pressure sensors for axle group load indication * Side underrun protection * Mechanically adjustable warning sign boards at the front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, both with splash protection * Foldable (hot-dip galvanized) cover for the toolbox in the turntable platform * Toolbox made from galvanized sheet steel, approx. 650 x 300 x 600 mm (black powder-coated), mounted on right side * 15-pin electrical connector * LED lighting, 12 / 24 V * Removable LED beacon at rear * Side marker lights with indicator control * Towing bar with 40 mm towing eye, height adjustable via tension spring and turnbuckle * Tire pressure monitoring system with in-cab display via EBS signal (no installation required on the truck) * Rubber lining on the folding ramps and on the left and right drive-up slope (approx. 860 mm long) * Rubber lining on longitudinal members from bulkhead to end crossmember * Hardwood flooring on the running surfaces of the low-bed platform * 4 stake pockets per side, each with 2 t lashing capacity * Load securing package consisting of: 5 pairs of UVV load rings, swiveling and retractable, loadable in all directions and recessed into the outer frame - corners rated to 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the sloped rear section) * Timber support holders under loading platform in longitudinal direction * Raised roller stop in front of the bulkhead, with 1 x 6.4 t lashing ring on each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically deployable ramp tip and load-holding valves * Hydraulic lateral ramp adjustment * Rear hydraulic support (single-stage cylinder) * Hydraulic flow divider in the trailer (for hydraulic pump output on the truck from over 40 l to max. 140 l / min) * Hydraulic control block, splashwater protected * Dual-line hydraulic system * Platform above turntable: approx. 1,960 x 2,520 mm * Rear loading platform: approx. 6,500 x 2,520 mm (including 860 mm approach ramp) * Loaded platform height: approx. 890 mm +/- 20 mm (air suspension adjustment) * Chassis, turntable, roller stop, folding extensions, and access ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks, etc. painted black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Immediately available ex Egestorf