Kullanılmış Faymonville 4-1+3-Achs-Tele-Semi-Radmulden-Rampen Zg satın al (66.830)

Durum: ikinci el, boş ağırlık: 14.995 kg, azami yük ağırlığı: 50.805 kg, toplam ağırlık: 65.800 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 10/2023, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: gri, Üretim yılı: 2023, işletme ağırlığı: 14.995 kg, Donanım: ABS, With every used semi-trailer, you receive a current and comprehensive inspection and functional report. Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Loading Platform: - Extendable loading platform with rear bevel approx. 500 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 4 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN) - 1 intermediate table 250 mm - Cut-outs in the outer frame of the loading platform for fastening straps (LC 2,000 daN) - Approx. 48 mm hardwood flooring, checker plate over the axles Axles and Tyres: - BPW axles, hydro-mechanical forced steering - Technical axle load: 12,000 kg - Air suspension with lifting/lowering valve - Axle tool kit - Tyres: 235/75 R17.5 Braking System: - Braking system compliant with EU regulations, EBS-E (4S3M) Included Accessories: - 2" king pin - Galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanized front connection panel - 4 wheel chocks with holders on the front wall - Spare wheel with holder in front of the front wall - Electro-hydraulic unit - Remote steering from front and rear via wired remote control, with push buttons and single-track axle monitoring - Recess at rear of gooseneck to accommodate ALU loading ramps - Galvanized, extendable widening by approx. 230 mm per side - European reflector panels (red-yellow) at the rear of the trailer - White reflective stripe compliant with EU regulations on the sides, on the extension, with red reflective stripe at the rear - Holders for warning signs on both the gooseneck and rear plate, including sockets left and right - Galvanized folding supports under the rear bevel of the loading platform - Mounting bracket for a beacon at the rear of the trailer - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2, removable pump guard Gjdov Hr Axopfx Amheiw - Mud flap at the rear of the trailer - Manual and documentation - On the gooseneck: Removable ALU side walls and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - 4 pairs of WADER container locks in the loading platform for one 20ft, two 20ft, 40ft, or one 45ft container - 8 pairs of stake pockets for 100 x 50 mm plug-in stakes in the external frame of the loading platform - Adjustable plug-in rails for ALU loading ramps at the rear of the vehicle - Lift axle on the front axle with control via TEBS E according to current axle load and loading condition - Four approximately 400 mm extendable warning signs, approx. 423 x 423 mm, each with a position light - Beacon bracket on the warning signs - Wireless remote control for rear steering in addition to cable remote, with indicator lights on receiver for single-track monitoring - Painted sand layer on checker plate above king pin and loading platform for slip resistance - 80 km/h speed sticker at the rear - Load gauge for determining axle loads including load chart

Durum: yeni, azami yük ağırlığı: 96.500 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 26.900 mm, toplam genişlik: 2.750 mm, Donanım: ABS, Our complete range of vehicles, including those available immediately and at short notice, can be found on our website. Excerpt from the equipment features. Full equipment details available on request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm * For tractors: 6 x 4 or 8 x 4 * Truck hydraulic connection with flow regulator (20 l/min), including gallows for suspension of supply lines. The tractor's tank must have a minimum capacity of 80 L * With MAX Trailer couplings, otherwise coupling parts to be supplied ex works by the customer * Gallows with winch for spare wheel located at the front of the gooseneck * 3.5 inch kingpin * Steel front wall approx. 400 mm high * Plug-in aluminium side and rear boards for the gooseneck, approx. 400 mm high, anodized finish * Operating levers on the gooseneck protected by a foldable cover * Illuminated controls at the gooseneck, with on/off switch * One 7-pin socket left and right at the rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for a gooseneck using standard grease NLGI-2 * Hydraulic couplings from gooseneck to lowbed deck with screw-type couplers * Access steps to the gooseneck * Four warning panels extendable approx. 1,000 mm, approx. 423 x 423 mm, with one LED marker light and bracket for rotating beacon * Mounting adapter for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3,000 rpm * Hydraulic connection lines between the power pack and the connector plate at the gooseneck * One LED work light left and right at the rear plate of the gooseneck with separate on/off switches * Radio remote control: - Operation of the power pack, start/stop of the diesel engine. - Operation of steering, in addition to cable remote control, with 2 LED indicators on the receiver for single-track monitoring. - Operation of raising/lowering the gooseneck. - Operation of raising/lowering suspension of running gear. 2-Axle Front Bogie: * Pin-eye coupling front and rear. Length: approx. 2,970 mm; bogie width: approx. 2,750 mm * BEKA-MAX central lubrication system for a 2-axle bogie with standard grease NLGI-2 (not connected to the tie rods) * One 7-pin socket left and right at the rear of the front bogie for warning panels * Bogie surface finished with painted-in sand coating for slip-resistance * Yellow reflective tape according to EU regulations on the side, at extension and at the rear of the trailer * One 7-pin socket for warning panels, left and right at the front bogie, in the axle area * Extendable extensions of approx. 230 mm per side for a 2-axle bogie * 1 pair of M42 threaded blocks between the axles of the front bogie * 1 pair of brackets for warning panels to be inserted into the stake pockets on the outer frame of the load bed Load Bed: * 6-axle, double telescopic load bed with pin-eye coupling at the front and a rear bevel of approx. 500 mm x 8° * Load bed length: approx. 11,000 mm Giedpfszahp Sex Amhew * Technically extendable by approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Standard width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the load bed with standard grease NLGI-2 * Load bed surface finished with painted-in sand coating for slip-resistance * 11 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * Permanently welded intermediate platform, approx.

Durum: yeni, azami yük ağırlığı: 36.040 kg, toplam ağırlık: 53.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Equipment excerpt. Full specification upon request. Gooseneck: * Gooseneck in SNT design to optimize the loading area length, approx. 3,750 mm long * Gooseneck hydraulically lift/lowerable and detachable * For tractor units: 6x4 or 8x4 Lowbed: * Lowbed with external beams, extendable in SUPER LOW design, approx. 8,000 mm long * Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking * Supply lines are protected within the extendable beams and automatically adjust to the lowbed length * 7 pairs of lashing rings foldable outward (LC 10,000 daN) * 6 pairs of threaded blocks on the inner girder for mounting screw-on RUD rings Rear Undercarriage: * Rear chassis with closed outer frame and checker plate cover * Chassis with excavator trough, closed in the rear half to accommodate air tanks * 3 pairs of lashing rings foldable outward (LC 5,000 daN) * 1 pair of lashing rings foldable outward (LC 10,000 daN) * 1 pair of flat lashing rings, front and rear of the chassis (LC 10,000 daN) Axles: * BPW axles and suspension, all axles hydromechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres: * Tyres 245/70 R 17.5 3PMSF – manufacturer of choice. Load index (146/146F) Brake System: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: * HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with 2 layers of 2K topcoat, single colour in RAL 3002 Carmine Red as per RAL system 841GL Including accessories: * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanized connection bar at the front * Remote steering from front and rear via cable remote control with push buttons, including single-track axle control (without installation in the tractor unit) * Prepared for bolt-on container positioning for 1 x 20', 1 x 40', or 1 x 45' container on the outer beams. No container locks * Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings * Electro-hydraulic power unit Gijdpjy Uwu Ijfx Amhsw * Spiral cable for supplying the electro-hydraulic power unit and/or electric winch (approx. 35 mm², approx. 3.5 m long, max. 250A) between semi-trailer and tractor unit with plug connection (NATO-NATO) * Yellow reflective tape to EU regulations on sides, extension and rear of the trailer * At the gooseneck and rear, left and right, a bracket for warning signs including a socket * Manual and description on USB stick * Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable guard around the pumps * 7 pairs of threaded blocks between the lashing rings under the top flange on the outer beam for mounting screw-on RUD rings VLBG-4 * 2nd ride height, approx. 50 mm above normal ride height, adjustable by hand control * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in stanchions are removable (body length approx. 2,560 mm) * On the gooseneck, a separate air connection with air gun * 1 stainless steel toolbox, approx. 1,350 x 400 x 400 mm, mounted externally

Durum: yeni, boş ağırlık: 11.300 kg, azami yük ağırlığı: 36.700 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.250 mm, süspansiyon: hava, lastik boyutu: 385/65 r 22,5, renk: gri-siyah, Donanım: ABS, Loading Area: Extendable loading platform with pneumatically operated locking mechanism A fixed intermediate table approx. 250 mm wide is mounted on the central beam 8 pairs of folding lashing rings (LC 5,000 daN) 3 pairs of folding lashing rings (LC 10,000 daN) Cut-outs in the outer frame of the loading area for hooking in tension straps (LC 2,000 daN) Axles and Tyres: BPW axles and suspension, all axles hydromechanically forced-steered Disc brakes, technical axle load: 10,000 kg Air suspension with lift and lower valve Axle tool kit 6 tyres 385/65 R 22.5 Brake System: Brake system according to EU regulations with EBS-E (2S2M) Landing Legs: JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load) Steel Construction: Steel construction made of high-strength fine-grained steels Steel grades: Gijdpfxshlz Shj Amhjw S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical System: Electrical system in line with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets Connections per ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Painting: Top-class and durable corrosion protection of the standard shot-blasted welded frame provided by a 2-component (2K) zinc-rich primer High-quality 2-component (2K) top coat in single-colour Nova Grey Rear end metallised and painted in RAL 9010 (pure white) Metallic paint not available Included Accessories: One bracket for warning signs, each at the gooseneck and the rear end plate, left and right, including socket Remote steering operated from front and rear using cable remote control with push-buttons, with single-track alignment of the axles Electro-hydraulic power pack 4 wheel chocks with holder on the front bulkhead 2" kingpin One galvanised steel headboard approx. 2,200 mm high Yellow-red pneumatic couplings on the galvanised connection rail at the front White reflective tape per EU regulations on the sides, on the extension, and red at the rear European reflective warning plates (red-yellow) at the rear of the trailer One mud flap at the rear of the trailer Manual and documentation Bracket for revolving beacon at the rear of the trailer Loading surface with approx. 30 mm thick wooden floor embedded in Omega profiles 10 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area 1 spare wheel holder under the loading platform on the right in the direction of travel 6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2x 20ft containers, or 1x 40ft container; an additional locking point in the extension is provided for a 45ft container 5 pairs of cross-mounted stanchion pocket rails in the loading area for plug-in stanchions 100 x 50 mm One galvanised bracket crosswise under the loading platform (2,390 x 720 x 400 mm) Entry ladder mounted on the right side in the direction of travel HDPE toolbox 1,200 x 500 x 480 mounted at the front under the loading surface on the left in the direction of travel Lifting axle on front axle, control by TEBS E depending on current axle load and load status Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 general-purpose grease and removable guarding around the pump Red/white reflective tape in the loading platform extension A sand layer painted on the central beam as anti-slip protection Radio remote control for rear steering in addition to cable remote, with in

Durum: yeni, azami yük ağırlığı: 38.140 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Partial equipment list. Full specifications available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and a rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear bevel approx. 1,000 mm x 8° - Between the 1st and 2nd axle, one pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable, galvanized wheel recess covers (approx. 670 mm wide - max. point load 5 t each) - 1 pair of recessed lashing rings at the front of the loading deck (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: Tyres 235/75 R17.5 3PMSF, brand at our discretion - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to the truck via the standardised EBS interface per ISO 11992 - For correct display, the truck must be capable of transmitting and displaying this data. Axles: - BPW axles and suspension, 2 fixed axles, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activatable via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Brake system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator Giodpfx Ajw Tpq Demhjw - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel structure: Steel frame made of high-strength fine-grain steels. - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel structure is automatically blasted after welding using a turbine blasting system - Second blasting with corundum for optimal coating adhesion - HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure top corrosion protection - Final painting with two coats of 2K paint, solid colour in RAL 3002 Carmine Red, rear section metallised and painted in RAL 9010 Pure White - No metallic paint possible - Paint finish tested in salt spray test per ISO 9227-NSS - Sealing of cavities with special wax Including the following accessories: - Mounts for warning signs on both sides at the gooseneck and at the rear, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch kingpin - Galvanized steel front bulkhead, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection panel - Galvanized folding supports under the loading area bevel - Hardwood impact protection on the rear wall from gooseneck to loading platform - 1 pair of recessed lashing rings along the central frame at the rear on the bevel (LC 10,000 daN) - Aluminium side walls and tailboard on the gooseneck

Durum: ikinci el, makine/araç numarası: YAFTL312000012613, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2012, toplam uzunluk: 13.700 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.300 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, renk: diğer, Üretim yılı: 2012, = Additional options and accessories = - Drum brakes = Notes = Chassis Diameter of kingpin / fifth wheel: 2 inch Height of kingpin / drawbar: 120 cm Drum brake: ✓ Special transport 2-piece road plates: ✓ Hydraulic ramps: ✓ Length over axles: 900 cm Loading platform length: 900 cm Gooseneck length: 360 cm Maximum width: 290 cm (250+20+20) Extendable: × = Further information = Axle configuration Tyre size: 245/70 R17.5 Axle make: SAF Brakes: drum brakes Suspension: air suspension Front axle: twin tyres; left inner tread depth: 40%; right inner tread depth: 25% Center axle: twin tyres; left inner tread depth: 50%; right inner tread depth: 40% Rear axle: twin tyres; left inner tread depth: 15%; right inner tread depth: 25% Weights Unladen weight: 11,000 kg Payload: 37,000 kg Gross vehicle weight: 48,000 kg Identification Registration number: C340521 = Company information = Giedpfox U D Aljx Amhsw For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durum: yeni, boş ağırlık: 9.150 kg, azami yük ağırlığı: 30.850 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.100 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, ABS, havalı süspansiyonlu (yükseltme ve alçaltma fonksiyonlu), dingil yük kantarları, toplam platform uzunluğu yaklaşık: 9.100 mm, alçak yatak yaklaşık: 6.900 mm uzunluğunda, yükseklik yüklü durumda yaklaşık 890 mm, 24 x her biri 10 t bağlama noktası, dış şasi üzerinde 12 x dikme cebi, rampa ve arka eğimde tırmanma çıtası dışta, sürüş rampaları (yaklaşık 3.100 x 760 mm), rampalar yanlara ayarlanabilir, 68 mm kalınlığında ahşap zemin, zincir veya gergi kayışı için kapaklı saklama kutusu, yönetmeliğe uygun kontur işaretlemesi, tepe lambası, yay basınçlı park freni, dingil yük göstergeleri dahil, araç daldırma banyosu – sıcak daldırma galvanizli, , opsiyon fiyatı: rampaların hidrolik kaydırılması = Fiyat: 1.000 €, , -- Baskı hataları, değişiklik ve yanlışlıklarda değişiklik hakkı saklıdır, örnek resimler --, Daha fazla bilgi için: !, More Details: ! Giedpszln D Sofx Amhow

Durum: yeni, boş ağırlık: 9.150 kg, azami yük ağırlığı: 30.850 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.100 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, ABS, Yükseltme ve alçaltmalı havalı süspansiyon, Aks ağırlık kantarları, Toplam yük platformu uzunluğu yaklaşık: 9.100 mm, Düşük yatak yaklaşık: 6.900 mm uzunluğunda, Yüklü yükseklik yaklaşık 890 mm, 24 x bağlama halkası (her biri 10 t), 12 x dış çerçevede kazık cebi, Rampa (yaklaşık 3.100 x 760 mm), Rampa ve arka eğimde dış tırmanma şeridi, Yanlara ayarlanabilir rampalar, 68 mm kalınlığında ahşap taban, Zincir veya gergi kayışları için kapaklı saklama kutusu, Yönetmeliğe uygun kontur işaretlemesi, Çevresel uyarı lambası, Yaylı park freni, Aks yükü göstergeleri dahil, Araç daldırma galvanizli, Gjdpfx Ajzldbtsmhoiw Ek ücret: Hidrolik rampa kaydırma = Fiyat: 1.000 € -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler -- Daha fazla bilgi için: !, More Details: !

Durum: yeni, boş ağırlık: 10.500 kg, azami yük ağırlığı: 29.500 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, 2 çift tekerlek evi kapaklı, ABS, kaldırma ve indirme fonksiyonlu havalı süspansiyon, aks yük terazileri, toplam yükleme alanı uzunluğu yaklaşık 10.250 mm, alçak platform yaklaşık 7.150 mm uzunluğunda, yüklü yükseklik yaklaşık 890 mm, her biri 10 ton için 24 adet bağlama halkası, her biri 3 ton için 40 adet bağlama halkası, rampa (yaklaşık 3.100 x 760 mm), rampa ve arka eğimde dış tırmanma şeridi, rampalar yanlara doğru ayarlanabilir, 68 mm kalınlığında ahşap zemin, zincir veya gergi kemeri için kapaklı depolama kutusu, yönetmeliğe uygun kontur işaretlemesi, döner uyarı lambası, yaylı park freni, aks yük göstergeleri dahil, araç çinko daldırma ile galvanizli, ekstra ücretle: hidrolik rampaların kaydırılması = Fiyat: 1.000 €, , -- Baskı hatası, değişiklik ve yanlışlıklar saklıdır, örnek resimler --, Daha fazla veri için: !, More Details: ! Gisdpszkt Exefx Amhew

Durum: yeni, boş ağırlık: 9.550 kg, azami yük ağırlığı: 30.450 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.100 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Air suspension with lift and lower function, axle load scales, total loading length approx. 9,100 mm, low-bed approx. 6,900 mm long, loaded loading height approx. 890 mm, 24 lashing rings (each for 10 t), 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing strip on the outside of the ramps and rear slope, loading ramps adjustable sideways, wooden floor 68 mm thick, storage box with lid for lashing chains or straps, contour marking as per regulations, warning beacon, spring-loaded parking brake, including axle load indicators, chassis hot-dip galvanized, Surcharge for: hydraulic ramp shifting = Price: 1,000 € -- Subject to typesetting, typographical and prior sale errors; sample images -- Godpfxezkt D Uj Amhjiw For more data/info, see: !, More details: !

Durum: yeni, boş ağırlık: 9.150 kg, azami yük ağırlığı: 30.850 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.100 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, ABS, Yükseltme ve alçaltmalı havalı süspansiyon, Aks ağırlık kantarları, Toplam yük platformu uzunluğu yaklaşık: 9.100 mm, Düşük yatak yaklaşık: 6.900 mm uzunluğunda, Yüklü yükseklik yaklaşık 890 mm, 24 x bağlama halkası (her biri 10 t), 12 x dış çerçevede kazık cebi, Rampa (yaklaşık 3.100 x 760 mm), Rampa ve arka eğimde dış tırmanma şeridi, Yanlara ayarlanabilir rampalar, 68 mm kalınlığında ahşap taban, Zincir veya gergi kayışları için kapaklı saklama kutusu, Yönetmeliğe uygun kontur işaretlemesi, Çevresel uyarı lambası, Yaylı park freni, Aks yükü göstergeleri dahil, Araç daldırma galvanizli, Ek ücret: Hidrolik rampa kaydırma = Fiyat: 1.000 € -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler -- Daha fazla bilgi için: !, More Details: ! Gisdpfxozkitxo Amhow

Durum: yeni, boş ağırlık: 10.500 kg, azami yük ağırlığı: 29.500 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Kapaklı 2 çift teker havuzu, ABS, kaldırma ve indirme özellikli havalı süspansiyon, toplam yükleme alanı uzunluğu yaklaşık: 9.100 mm, alçak yatak yaklaşık: 6.900 mm uzunluğunda, yüklü yükseklik yaklaşık 890 mm, her biri 10 tonluk 24 bağlama noktası, her biri 3 tonluk 40 bağlama noktası, rampa (yakl. 3.100 x 760 mm), rampalar ve arka eğim dış tarafında tırmanma çıtası, rampalar yana ayarlanabilir, 68 mm kalınlığında ahşap zemin, zincir veya gergi kayışları için kapaklı saklama kutusu, yönetmeliklere uygun kontur işaretlemesi, döner uyarı lambası, yaylı park freni, dingil yük göstergeleri dahil, daldırmalı sıcak daldırma galvanizli araç, ek ücret: rampaların hidrolik kaydırılması = fiyat: 1.000 €, -- baskı hatası, değişiklik ve revizyon hakları saklıdır, örnek fotoğraflar --, daha fazla bilgi için: !, detaylar için: ! Giedpfx Amjzkiqkohew

Durum: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting on the first axle, activated via EBS (no truck-side installation required) * Rearmost axle as a self-steering trailing axle with electro-pneumatic steering lock Gisdoq Euakspfx Amhew * Lock for the trailing axle can be activated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function, including ride height control valve ----Electrics / Lighting: * Smart-Board mounted as infotool on trailer with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12/24 V * Removable LED rotating beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel wheel arches * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swivel arm as carrier for connection cables from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with front edges chamfered at 45°, front toolbox made of galvanised, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminium drop sides on the platform (in RAL colour of choice), fold-down and removable * Rear board plugged in, 150 mm high * Rear chamfer at the platform leading to the lowbed, approx. 700 mm long with checker plate covering and a perforated strip at the end for hooking in aluminium approach ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over axles * 9 mechanical folding widenings to 3 m total width (excluding rear chamfer), widening planks included, with lockable transverse storage compartment under the loading area * 3 storage compartments under the platform for optional aluminium approach ramps or wooden planks for wheel well covering ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum spacing 480 mm) * Each side equipped with 3 sunken 13.4 t lashing rings in the floor (1 on the platform, 1 on the longitudinal beams after the gooseneck, 1 above the middle axle next to the longitudinal beam) Low Loader Platform: * Each side equipped with 3 x 13.4 t lashing rings on the outer frame (1 at start of gooseneck, 1 at start of drive-on chamfer, 1 at end of drive-on chamfer) * Each side with 2 x 10 t lashing rings (1 between front wheel well and 1st axle, 1 between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frames of the wheel wells (2 at the front and 1 at the rear wheel well) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle across the steering axle to rear crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * Each side with 2 x 6.4 t lashing rings

Durum: ikinci el, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2010, Donanım: ABS, Dorse - Araç Kimlik No.: W09PG3009A0M49815 - İlk tescil: 25.08.2010 DOLLY - Araç Kimlik No.: W09PG3009A0M49816 - İlk tescil: 25.08.2010 ELEKTRİKLİ HİDROLİK SİSTEM Almanya'da muayene zamanı gelmiş Boş ağırlık: Dorse: 16.850 kg -- DOLLY: 2.240 kg Çeki yüksekliği: 1.280 mm - Değiştirilebilir king pimi - 3,5 " Ön dönme mesafesi yaklaşık 1.640 mm ----hidrolik olarak alçaltılıp yükseklik ayarlanabilen kuğu boynu - Uzunluk 3.750 mm Alçak yatak: Uzunluk 6.850 mm Genişlik 2.750 mm - Yükleme yüksekliği: yaklaşık 350 mm TELESKOPİK olarak 4.000 mm uzatılabilir Genişletilebilir: 3.210 mm’ye kadar Şasi: Uzunluk: 4.100 mm Genişlik: 2.750 mm - Yükleme yüksekliği: yaklaşık 1.035 mm Toplam uzunluk: 14.700 mm Ekskavatör çukuru - Arm çukuru Merkezi yağlama sistemi GIGANT akslar - SALINCAK AKSLAR, davlumbaz frenli Uzaktan kumanda ile çalışır 3 x hidrolik süspansiyonlu ve zorunlu yönlendirmeli aks Aks yükleri 3 x 12.000 kg Giedowxi Nrjpfx Amhsw treylere uygulanan king pin yükü maksimum 25.000 kg Lastikler: 245/70 R 17,5 Uygun DOLLY 1 aks BPW Eco aks, davlumbaz frenli Havalı süspansiyonlu Değişiklik, ara satış ve hata yapma hakkı saklıdır. Tanımlama aracı genel tanıtımı için yapılmıştır ve satış hukuku anlamında bir garanti teşkil etmez. Satış sözleşmesindeki açıklama esas alınır. Teklifimiz genel olarak yeni TÜV muayenesi (Alman muayene) olmadan geçerlidir. Yeni TÜV muayenesi isterseniz, ortak servislerimizden teklif sunmaktan memnuniyet duyarız! Araç reklam kaplamalı ve/veya yazılı olabilir. Genel teslimat ve ödeme şartlarımız geçerlidir.

Durum: ikinci el, boş ağırlık: 19.880 kg, azami yük ağırlığı: 40.120 kg, toplam ağırlık: 60.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2021, yükleme alanı uzunluğu: 7.700 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 350 mm, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2021, Donanım: ABS, Şasi: - Ön ve arka şasi kıvrımlı, düz alçak platformlu, eğimsiz çelik çerçeve kaynak konstrüksiyonu Gijdpfx Amozd Tdzehjw - Ön köşeler 400 mm x 400 mm eğimli - Alçak platform, yaklaşık 5.400 mm uzatılabilir iki çekilebilir şasiye sahip, biri 400 mm, ardından her biri 500 mm’lik kademelerle pnömatik kilitlenebilir - 1.833 mm’de 30 ft konteyner için kilitleme - 4.900 mm’de 40 ft konteyner için kilitleme - Kayar ara destek yaklaşık 500 mm genişliğinde, sadece araç teleskopik haldeyken kullanılır (toplanmış durumda ara destek yoktur) - Değiştirilebilir 2" ve 3,5" king pinli beşik plakası - Maks. nokta yükü: Toplanmış durumda 4 m üzerinde 50 ton - Aks grubu üzerinde sürekli ekskavatör kanalına sahip, katlanabilir alüminyum kapaklı - 2 adet, her biri 1.500 mm uzunluğunda kilitlenebilir kapak. Arka bölüm sabit alüminyum kapaklı, elektro-hidrolik ve merkezi yağlama sistemi için - Alçak platform arka kısmında mekanik pim yastıklı kuplör, platformda ön gerilim için Boyun: - Hidrolik olarak eğilebilen ve yüksekliği ayarlanabilen boyun - Destekleme, çekici aracı üzerinde iki hidrolik silindir ile sağlanır. Kumanda elektro-hidrolik ünite üzerinden yapılır - Boyun üzerinde alçak platform yükleme yüzeyi ve ara dişli için kombine bağlantı - Boyun farklı king pin yükleri için anahtar ile (18/24 ton) Akslar, Direksiyon ve Lastikler: - Gigant düşük şasili yarı römork akslar, her biri 12 ton aks yükü - Hidrolik süspansiyon, kaldırma mesafesi yaklaşık 300 mm, sürüş yükseklikleri hidrolik olarak ayarlanabilir - S-kam fren 300/150 mm, asbestsiz fren balataları - Otomatik bağlantı ayarlayıcı - İz genişliği 1.995 mm, dingil mesafesi 1.510 / 1.510 mm - Süspansiyon için arkada sağda ve solda kontrol kolu - 1. aks (ara dişli ünitesi), king pin bağlantısı üzerinden hidrolik zorunlu yönlendirilir - 2., 3. ve 4. akslar king pin bağlantısı ve dingil mili üzerinden hidrolik zorunlu yönlendirilir - Boyunun elektro-hidrolik ünitesi ve çekici araçtan NATO prizi ile beslenen elektrikli-hidrolik ünitesi ile elektro-hidrolik arka yönlendirme - Kumanda kablosu ve çıkış kutusu ön ve arka bitim levhasında - Kablolu uzaktan kumanda ve ayrıca radyo uzaktan kumanda - 13 / 17 lastik 245/70 R 17,5 146/146F, tubeless Ara Dişli Ünitesi: - 1 akslı, boyun ile alçak platform arasında monte edilebilir - 12 ton taşıma kapasiteli yarı aks, hidrolik süspansiyon - Dört adet lastik - Fren hortumları bağlantı başlıklarıyla, hidrolik hortumlar ise çoklu (6’lı) bağlantı ile birleştirilir - Aks, kesme vanası ve pim sayesinde kaldırılabilir Aksesuarlar: - Ön duvar = Komple genişlikte, 600 mm yüksekliğinde, 550 mm derinliğinde üstten kapaklı ve solda-sağda yan kapaklı çelik sac alet kutusu - Ön eğime göre uyarlanmış köşeler - Yan duvarlar 25 mm alüminyum profil, 600 mm yüksekliğinde, tek parça, alçak platformdan 500 mm önceye kadar, katlanabilir - Takılabilir alüminyum arka duvar ve arka köşe direkleri, yan duvar yüksekliğinde - Son levhada uzun plaka tutucu - Son levhada 2 adet ECE uyarı tabelası - Yüksek platformda, her biri 4 ton çekme kapasiteli gömülü 3 çift yük halkası, yaklaşık 1.500 mm önden montajlı - 3 çift ağır hizmet yük halkası, her biri 13,4 ton çekme kapasiteli; bunlardan 1 çift yüksek platformda, birer çift de yüksek platformun orta kısmının önünde ve arkasında boyuna kirişi üzerinde asılı monte edilmiş - Her iki tarafta alçak platformda katlanabilir genişletmeler, toplam genişlik 3.000 mm - Yük genişliği 5.000 mm'ye kadar sonsuz uzatılabilir uyarı levhaları - Ön taraftan alçak platforma çıkmak için y

Durum: ikinci el, kilometre: 174.048 km, güç: 338 kW (459,55 bg), ilk tescil: 03/2019, yakıt türü: dizel, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 3 aks, bir sonraki muayene (TÜV): 01/2026, renk: siyah, vites türü: otomatik, emisyon sınıfı: Euro 6, yükleme alanı hacmi: 18 m³, yükleme alanı uzunluğu: 5.800 mm, yükleme alanı genişliği: 2.300 mm, yükleme alanı yüksekliği: 1.350 mm, Donanım: ABS, klima, * Sun visor * ABS * Radio * Cruise control * Electric window lifters * Electrically adjustable mirrors * Mirror heating * Driver’s air-suspended seat * Transfer case * Low-range gearing * AP axles * Steel bumper * Raised air intake * Air dryer * Shunting coupling * Folding underrun protection Gisdpfx Amewdb Ukehow * Reversing camera * Air horns * Hill start assist * Longitudinal and transverse differential locks * Off-road driving program * Rotating beacon, orange * Paver brake * 12-speed transmission * Suspension: leaf springs * Payload: 16,180 kg * Continuous brake: electronically controlled engine brake ----Body: Meiller half-pipe rear tipper, capacity approx. 18 m³, heavy-duty design (36,000 kg) with central articulation, rear chute.----Last service carried out (self-serviced by previous owner) in 10/24 at 164,000 km! Sale to business customers only. FOR EXPORT, ONLY THE NET PRICE MUST BE PAID! ALL INFORMATION WITHOUT GUARANTEE, PARTICULARLY REGARDING EQUIPMENT AND ACCESSORIES. The basis for all purchase contracts, invoices, pro forma invoices, orders, and sales discussions are our general terms and conditions (see legal notice).

Durum: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11-ton BPW axles * Traction aid for shunting purposes, activated on the first axle via EBS (no truck-side installation required) Gsdpfxjykx Nkj Amhoiw * The last axle as a self-steering trailing axle with electro-pneumatic steering lock * Locking of the trailing axle for shunting purposes, controlled from the driver's cab via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function as well as Ride height control valve ----Electrical / Lighting: * Smart-Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * Removable LED rotating beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for extended length lighting * Side marker lights with indicator function * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swiveling supports at the rear of the chassis * Straight sheet steel mudguards * Spare wheel holder in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection lines from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with hinged lid * 400 mm high aluminium drop and removable side walls (in RAL color of choice) on the fifth wheel platform * Rear wall —150 mm— plugged in high * Rear slope on the fifth wheel platform to the low-bed, approx. 700 mm long with checker plate covering and a perforated strip at the end for attaching aluminium drive-on ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, low bed platform with 60 mm clamped wooden floorboards * Checker plate over the axles * 9 mechanical folding wideners to 3 m overall width (excluding rear slope); widening planks available with closed transverse storage compartment underneath the load platform * Preparation for 3 insertion shafts under the fifth wheel platform to store either aluminium drive-on ramps or wooden planks for covering wheel recesses * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated external frame, 45° bent, with hole pattern for lashing devices (2 t lashing capacity per point at a minimum distance of 480 mm) * 3 x 13.4 ton lashing rings recessed to the side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low Loader Platform: * 3 x 13.4 ton lashing rings on each side of the external frame (1 x at the start of the fifth wheel step, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 ton lashing rings on each side (1 x between the front wheel recess and first axle, 1 x between 2nd and 3rd axle) * 3 x 5 ton lashing rings screwed to each side of the external frames of the wheel recesses (2 at the front, 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last

Durum: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Maneuvering aid for shunting purposes on the first axle, activated via EBS (no truck-side installation required) * Rear axle as self-steering axle with electro-pneumatic steering lock * Steering lock for the trailing axle, operated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function and RTR valve ----Electrics / Lighting: * Smart-Board installed on the trailer as an info tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for length extension lighting * Side marker lamps with indicator function * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Support winds at the front and swiveling supports at the rear on the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swivel arm as a carrier for connection cables from the truck to the semi-trailer Gsdpeykx Nqefx Amhjiw ----Lowbed Deck: * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and tool box at the front made of galvanized, powder-coated steel B = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high drop-side aluminium boards on the sides of the fifth wheel platform (in RAL color of choice), foldable and removable * Rear wall insertable, 150 mm high * Rear slope on the fifth wheel platform, approx. 700 mm long with chequer plate surface and at the end a perforated bar for hooking in aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 x mechanical fold-out extensions to 3 m total width, except on the rear slope (extension boards available with closed storage compartment crosswise under the loading area) * Preparation for 3 mounting shafts under the fifth wheel platform to store either aluminium loading ramps or wooden planks for wheel well covers * Preparation for container locks on the swan neck ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled with hole pattern for lashing points (2 t lashing force per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal beams after necking, and 1 x above the center axle next to the longitudinal beam) Lowbed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the fifth wheel platform neck, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel well and 1st axle, and 1 x between 2nd and 3rd axles) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel well (2 on the front wheel well, 1 on the rear wheel well) ----Excavator boom support: * Extended excavator boom support from the end of the last rigid axle, over the steering axle, up to the end crossmember, continuous with internal reinforceme

Durum: yeni, azami yük ağırlığı: 43.929 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 16.690 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.570 mm, Donanım: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Lowbed Semi-Trailer, Extendable, with Wheel Recesses (NEW) --- Equipment & Highlights Technology & Structure Extendable lowbed semi-trailer with wheel recesses - External length: 13,190 mm; platform: 9,240 mm + 3,500 mm extension - Platform height: only 875 mm for low loading level - Overall width: 2,550 mm + 600 mm extension Giedpfex Efznox Amhjw - Unladen weight: approx. 14,071 kg - Perm. total weight: 58,000 kg (80 km/h) / 63,800 kg (60 km/h) Chassis & Axles 4 BPW axles: first 2 rigid, rear 2 self-steering - Lift axle (automatic + manual) - Air suspension with load gauge - WABCO EBS 4S/3M, ABS & RSS - WABCO Smartboard (axle load, suspension, diagnostics) - 16x tires 245/70 R17.5 (M+S + 3PMSF) - Tire pressure monitoring as per R141 Ramps & Loading Area Folding 40-ton ramps - Ramp length: 2,750 mm; 850 mm width - Hydraulic sliding system - 45 mm hardwood floor + checker plate steel above wheel recesses - Wheel recesses incl. cover bridges - Excavator arm recess at the rear Load Securing Extensive lashing points: - 2×2 lashing rings 5,000 daN & 1×2 lashing rings 10,000 daN at gooseneck - 3×2 lashing rings 5,000 daN & 4×2 lashing rings 10,000 daN on platform - 8,000–10,000 daN on external frame/recess area - 5×2 stake pockets, stake dimensions 50×100 mm - Container locks for 1×20 ft or 1×30 ft Features & Comfort - 1x toolbox (700×400×360 mm) - Stake box - Rotating beacon - LED side lighting, LED work lights - Wheel chocks - Extension marker boards with LED - Standard 2" kingpin - Metallised chassis (Zn/Al 85/15) – high corrosion protection - Color: RAL 9005 black --- Special features - New & available immediately - High payload, extremely flexible - Perfect for machinery transport, construction equipment, vehicles, etc. - Highly robust construction, premium BPW components For further information, please feel free to contact us.

Durum: yeni, azami yük ağırlığı: 43.929 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 16.690 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.570 mm, Üretim yılı: 2025, Donanım: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Extendable Low Loader with Wheel Wells (NEW) — Equipment & Highlights — Technology & Bodywork • Extendable low loader with wheel recesses • Overall length: 13,190 mm, platform length: 9,240 mm + 3,500 mm extension • Platform height only 875 mm for low loading height • Overall width: 2,550 mm + 600 mm extension • Unladen weight approx. 14,071 kg • Permissible total weight: 58,000 kg (80 km/h) / 63,800 kg (60 km/h) Chassis & Axles • 4 BPW axles: 2 fixed front axles, 2 rear trailing axles • Lift axle (automatic & manual) • Air suspension with load gauge Giedpfsx Ix Rqjx Amhew • WABCO EBS 4S/3M, ABS & RSS • WABCO Smartboard (axle load, suspension, diagnostics) • 16x tyres 245/70 R17.5 (M+S & 3PMSF) • Tyre pressure monitoring system (compliant with R141) Ramps & Loading Area • Foldable 40-tonne ramps • Ramp length: 2,750 mm, width: 850 mm • Hydraulic sliding system • 45 mm hardwood floor + steel chequer plate over wheel arches • Wheel recesses and covering bridges included • Excavator arm recess at rear Load Securing • Extensive lashing points: • 2×2 lashing rings, 5,000 daN & 1×2 lashing rings, 10,000 daN on the gooseneck • 3×2 lashing rings, 5,000 daN & 4×2 lashing rings, 10,000 daN on the platform • 8,000–10,000 daN on external frame / wheel recess area • 5×2 stake pockets, insertable stakes 50×100 mm • Container locks for 1×20 ft or 1×30 ft Features & Comfort • 1× toolbox (700×400×360 mm) • Stake rack compartment • Warning beacon • LED side lighting, LED working lights • Wheel chocks • Extension marker boards with LED lighting • Standard 2" kingpin • Metallised chassis (Zn/Al 85/15) — excellent rust protection • Colour: Red — Special Features — • New & immediately available • High payload, extremely versatile • Perfect for transporting machinery, construction equipment, vehicles, etc. • Very robust construction, high-quality BPW components For further information, we are happy to assist you.

Durum: ikinci el, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 05/2007, Donanım: ABS, Vehicle Identification Number: XL942N5SA7L007207 Fifth Wheel Load: 18,000 kg – Axle Loads: 4 x 10,000 kg Empty Weight: 11,020 kg German MOT (HU) due Gooseneck Length: 4,100 mm Coupling Height: 1,250 – 1,400 mm (King Pin 3.5") Lowbed: Length: 9,400 mm, including sliding table 500 mm (of which 600 mm is chamfered) – Width: 2,525 mm – Loading Height: 880 mm TELESCOPIC EXTENSION: up to 6,300 mm EXTENDABLE WIDTH: up to 3,000 mm Removable side rails Technical axle loads: 4 x 10,000 kg Godpfx Amey T Aq Eshsiw SAF axles with drum brakes Axles 3 and 4: self-steering Large toolbox on gooseneck Central lubrication system Tyres: 245/70 R 17.5 Modifications, prior sale, and errors excepted. The above description is intended for general identification of the vehicle and does not constitute any warranty in the legal sense. The specification in the purchase contract is binding. Our offer is generally without a new TÜV inspection. Should you require a new TÜV approval, we would be happy to provide an offer from our partner workshops! The vehicle may be provided with advertising decals and/or labeling. Our general terms and conditions of delivery and payment apply.

Durum: ikinci el, azami yük ağırlığı: 37.530 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 02/2012, bir sonraki muayene (TÜV): 11/2026, toplam genişlik: 3.000 mm, toplam yükseklik: 3.780 mm, Donanım: ABS, * Gooseneck with foldable side walls * Low bed length: 11,950 mm - 15,450 mm * Low bed extendable in stages by 3,500 mm * Low bed width extendable by 460 mm * Hydraulically adjustable loading ramps (split, 2-piece) * Stakes pockets * Wabco SmartBoard * 4 axles with twin tires * 1st axle liftable * 3rd and 4th axle with trailing steering * Wheel chocks ----* Tire size: 235/75R17.5 * Technical gross weight: 58,000 kg * Curb weight: 12,470 kg * Total length: 13,700 - 17,200 mm * Overall width: 2,540 - 3,000 mm * Next safety inspection due: 05/2026 ----Vehicle number: 12062----Subject to errors and prior sale----Advertising and various lettering have been digitally removed.----We are happy to assist you with all formalities involved in purchasing a vehicle, providing support and advice at every step. Simply let us know your requests and suggestions, and we will take care of them for you. Among other services, we can additionally offer the following (subject to surcharge):----* Trade-in of your old vehicle * Technical inspection/certification (HU/SP) * Complete export processing * Financing arrangement * Application for export license plates Gedpfey T Dyzox Amhoiw * Vehicle transfer * Vehicle registration * Recovery and vehicle transport ----Your VTS Team

Durum: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: Gedpfxjtpta Do Amhsiw * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start assist for shunting operations activated on the first axle via EBS (no installation required on the truck side) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Trailing axle lock for shunting, controlled from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with raising and lowering function and ride height control valve ----Electrics / Lighting: * Smart-board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring with display capability in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Side underrun protection * Support legs at the front and swivel jacks at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning board kits at front and rear * Pivoting arm as carrier for connection lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Semi-trailer platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * Removable and fold-down 400 mm high aluminum sideboards on the semi-trailer platform (in custom RAL color) * 150 mm high inserted rear panel * Rear bevel on the semi-trailer platform to the low-bed area, approx. 700 mm in length, with checker plate covering and a perforated strip at the end for hooking on aluminum drive-up ramps * Semi-trailer platform with 50 mm clamped wooden planks; low-bed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 mechanical folding extensions to a total width of 3 m, not in the rear bevel (extension planks available with enclosed transverse storage compartment under the loading area) * 3 storage compartments under the semi-trailer platform for optional storage of aluminum ramps or planks for covering wheel recesses ----Load Securing (LaSi package): Semi-trailer platform: * Perforated outer frame angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the semi-trailer platform, 1 on the longitudinal member after the step-down, and 1 above the center axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings per side on the outer frame (1 at the start of the step-down, 1 at the start of the ramp, 1 at the end of the ramp) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel recesses (2 on the front, 1 on the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, running from the end of the last rigid axle over the steering axle to the rear cross member, continuous, with internal reinforcement profile, approx. width 770 mm, rear depth 270 / front depth 170 mm * 2 x

Durum: ikinci el, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2015, Donanım: ABS, Besuchen Sie unsere Webseite, wo Sie unseren gesamten Fahrzeugbestand mit vielen weiteren Fotos und Informationen in mehreren Sprachen finden. SEL 7491 Faymonville F-S43-1BGA Teleskopierbar / Lenkachse deutsche Zulassung Erstzulassung: 27.05.2015 Techn. zul. Gesamtgewicht (kg): 48.000 Zulässiges Gesamtgewicht (kg): 42.000 Leergewicht (kg): 9.500 FIN: YAFSR300XF0016868 BEREIFUNG UND ACHSEN: Bereifung: 235/75 R 17,5 Achskonfiguration: 3 Achsen SAF 3. Achse: Nachlaufgelenkt Luftfederung Trommelbremsen Gjdpfx Amewknudjhoiw WEITERE SPEZIFIKATIONEN: Teleskopierbar FAHRZEUGDOKUMENTE: Schein Brief M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO j. (Português, Español, Italiano, English) J. MARJANOVIC d. (Deutsch, Bosanski) L. OBODYNSKA Ukrainisch/Українська, Russisch/Русский Wir sprechen: DEUTSCH, ENGLISCH, ITALIENISCH, SPANISCH, PORTUGIESISCH, UKRAINISCH, RUSSISCH, POLNISCH Obwohl alle Anstrengungen unternommen wurden, um die Richtigkeit der Angaben zu gewährleisten, übernehmen wir keine Haftung für eventuelle Fehler oder Auslassungen. Bitte konsultieren Sie die bereitgestellten Fotos. Die angegebenen Maße sind Circa-Werte. Unsere Fahrzeuge werden im vorhandenen Zustand verkauft. Wir laden unsere Kunden ein, unser Unternehmen zu besuchen, um den Zustand des Fahrzeugs persönlich zu prüfen. Zudem bieten wir die Möglichkeit einer Probefahrt an. Bitte beachten Sie, dass die mitgelieferten Batterien diejenigen sind, die aktuell im Fahrzeug verbaut sind. Wenn Sie neue Batterien wünschen, informieren wir Sie gerne über die Preise.

Durum: ikinci el, toplam ağırlık: 50.100 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 12/2019, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.540 mm, toplam genişlik: 2.540 mm, Donanım: ABS, Vehicle Identification Number: YAMT23XX1K0104335 TELESCOPIC EXTENSION up to 7,300 mm CONTAINER POCKETS WADER for 1 x 20", 2 x 20", 1 x 40", can be extended for 45" container German MOT (HU) valid until 02/2027 – Safety Inspection (SP) until 08/2026 SAF axles with drum brakes Gsdeywqduopfx Amhsiw 3 hydraulically/mechanically forced-steered axles with cable control + radio remote control Platform dimensions: 13,500 mm (including 500 mm tapered section) – loading height: 1,100 mm Fifth wheel height: 950 – 1,050 mm Rear steering angle: 2,100 mm Stake pockets in the floor, including stakes (completeness not guaranteed) NATO socket – electro-hydraulic unit Width marker illumination Toolbox Central lubrication system Tyres: 235/75 R 17.5 Spare wheel holder WITH spare wheel Specifications subject to change, prior sale, and errors excepted. This description serves for general identification of the vehicle and does not constitute a warranty as defined by commercial law. The purchase contract description is legally binding. Our offer generally does not include a new MOT (TÜV) inspection. If a new MOT inspection is required, we are happy to provide a quote from our partner workshops. Vehicle may have advertising stickers or lettering. Our general terms and conditions of delivery and payment apply.