Kullanılmış Fliegl Sds 470 T Mit Radmulden satın al (56.117)

Koşul: yeni, makine/araç numarası: e4d182b7a074e7b83e540ed58, boş ağırlık: 5 kg, azami yük ağırlığı: 32 kg, toplam ağırlık: 38 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/55 r22.5, Further information Chassis: Semi-Trailer for Containers Fine-grain steel welded construction, fifth wheel plate with replaceable kingpin and two kingpin positions Container Mounts: Rear extension retracted: - 1 x 20 ft flush to rear, low saddle load Rear extension extended, 1st stage: - 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: - 1 x 45 ft with short gooseneck tunnel and rear overhang Rear extension extended, 2nd stage + front extension 1st stage: - 1 x 45 ft with long gooseneck tunnel and chamfered corners with adjustable rear height and folding center supports for containers without tunnel Front container guides removable and plug-in (electrical, air and brake connections at the front cross member) Plug adapter for front locking, for securing containers without tunnel from underneath, with holder when not in use Front extension mounted on rollers, manually extendable (for 45 ft container with long tunnel) Rear extension mounted on rollers, operated by hand crank 24 t, 2-speed landing gear, one-sided operation, with straight lower section, without push compensation 2 wheel chocks with holder Aluminum side underrun protection Galvanized steel rear underrun protection Extendable rear underrun protection for 45 ft containers Half-shell mudguards With anti-spray mud flaps according to EC Rear impact protection Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser aligned to reduce tire wear and fuel consumption Axle spacing offset (intermodal traffic), up to 44 t gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up aid, operated by braking 3 times (start-up aid active up to 30% axle load exceedance and max. speed of 25 km/h) Braking system 2-line compressed air braking system, color-coded tubing for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at front, without connecting cable Note: The trailer may only be towed by tractor units ensuring effective ABS function! With lift and lower valve + auto-reset function Vehicle driving stability system Axle load recognition via EBS CAN bus signal, for display in the truck cab (truck must be pre-wired, not calibrated as a weighing scale) Wheels and Tires 385/55 R22.5, manufacturer at manufacturer's discretion Steel rims, factory silver Electrics 24 volt, multi-chamber lights, yellow LED side marker lights 2 white position lamps at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable Operating Notes The stated gross weight is technically possible; depending on cargo, the actual gross weight may not be achieved while observing the permissible axle, support, and saddle loads. Special approval required when train length exceeds 16,500 mm. When transporting a 45 ft container with short tunnel, with or without front extension, the approved system length from kingpin to rearmost end and a gross train length of 16,500 mm is exceeded! The rear underrun protection must be manually extended! An exemption according to § 70 StVZo is required! Registration / Plates Germany Dsdpfxsi Rizuj Aldecg Type approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning plate according to ECE - 70 Reflective contour marking

Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33901014232, boş ağırlık: 5.900 kg, azami yük ağırlığı: 29.100 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2025, bir sonraki muayene (TÜV): 07/2026, yükleme alanı uzunluğu: 13.800 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 2.638 mm, süspansiyon: hava, lastik boyutu: 235/75 R17,5, renk: diğer, Üretim yılı: 2025, Chassis Semi Low-loader for Haulage Fine-grain steel welded construction, fifth wheel plate with interchangeable 2" kingpin Drive-over and loadable with construction/agricultural machinery up to max. 24,000 kg gross weight and up to a maximum machine width of 2,480 mm (the track width of the machine/vehicle to be transported must not exceed 2,200 mm), with latching bar for aluminium ramps at the rear (wider construction/agricultural machines may not be loaded) Outer frame, slightly sloped new design with "Load-Lock profile" for lashing strap attachment 14 pairs of recessed lashing rings in the outer frame, each rated at 2.5 t 6 pairs of recessed lashing rings in the outer frame, each rated at 5 t 24 t, 2-speed landing gear, single-side operation, straight base, without load equalisation Clear landing gear foot dimension or free swing radius towards rear approx. 1,920 mm Rear folding support 2x wheel chocks with holder Side protection in aluminium Underrun protection steel Quarter shell mudguards in front of and behind each axle With anti-spray flaps behind each axle 1x spare wheel holder for 1 emergency wheel, incl. wheel fixing kit 1x spare wheel, same manufacturer and design as main tyres, steel rim Axles & Suspension SAF drum brake axles "Axles/chassis laser measured" - reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, additionally electrically operated from truck, including forced lowering & starting aid, without truck installation (starting aid functional up to axle overload of 30% and up to max. 25 km/h) Brake System 2-line compressed air brake system Colour-coded line routing for easy service. Spring-loaded parking brake 2 non-interchangeable coupling heads at front, without interconnection pipe 24 Volt EBS, electronic braking system with EBS socket at the front, without connection cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! With raise & lower valve Vehicle stability system "TPMS" Tyre Pressure Monitoring System according to ECE R 141, displayed via the truck's display, via EBS, without truck installation (precondition must be met in the truck. Only for main tyres) Wheels and Tyres 12x 235/75 R17.5 Twin tyres 12x steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting synchronised with indicator "Flashing side marker lights" 2 white LED position lamps at the front 2 white/red track marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connection cable Floor Birch plywood approx. 30 mm, high point load capacity for forklift axle load up to max. 5,600 kg Front bulkhead / front corner posts 25 mm aluminium hollow profile, 1,350 mm high, steel corner posts in volume design Dcodpfsxb D Swsx Aldeg Front bulkhead inside additionally plated with 1,250 mm high birch plywood

Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902029406, boş ağırlık: 5.800 kg, azami yük ağırlığı: 29.200 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 12/2021, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.790 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5", renk: gümüş, Üretim yılı: 2021, The images are archive photos; the vehicle may still be in use! Chassis Semi-Trailer Spedition High-tensile steel welded construction in lightweight design, fifth wheel plate with replaceable 2-inch kingpin, coil well approx. 8,040 mm long, 6 coil supports (coil pockets inside 82 x 52 mm), coil cover with phenolic plywood boards and steel cross members, 2 slit strip covers for the coil well, each approx. 293 mm wide, unladen weight approx. 13 kg per cover, outer frame slightly inclined with 'Load-Lock profile' for lashing strap attachment. Note: To attach the straps in combination with side walls, the side walls must be opened! 9 pairs of lashing eyes, each with a 5-ton capacity, recessed in the coil well area, 24-ton, 2-speed landing gear, single-sided operation, with straight base section, without compensating ram. Note: Free landing leg corner dimension or free pivoting radius to the rear approx. 1,930 mm, without landing gear, pull-out ladder at the rear, door retainers at the sides, 2 wheel chocks with holders, side underrun protection made of aluminum, bracket mounted transversely to the longitudinal beam and on the longitudinal beam for supporting aluminum planks, rear underrun protection aluminum, half-shell mudguards, fitted with anti-spray mudflaps according to EU, rear bumper, 1 plastic toolbox, 2 pairs of stanchion sockets recessed into the outer frame, approx. 72 x 42 mm internal dimensions, positions 1 and 2 according to Fliegl stanchion data sheet (old version), as with AU 19219. Dsdpfswhp A Dox Aldjcg 2 stanchion sockets centrally recessed into the floor, approx. 72 x 42 mm internal dimensions, positions 1 and 2 according to Fliegl stanchion data sheet (old version), as with AU 192198. Note: Stanchion sockets/inserting stanchions are not designed for sole load securing of long material, pipes, etc. without lashing. Axles & suspension SAF disc brake axles with 430 mm disc diameter, 'axle/chassis laser alignment' reduces tire wear and fuel consumption, axle spacing offset 1,410/1,310 mm (combined transport) up to 44-ton total train weight, air suspension, no lift axle. Please note: The images are archive photos, the vehicle may still be in use!

Koşul: yeni, makine/araç numarası: 1e7fb50bfb3671204fb4d0b92, boş ağırlık: 4 kg, azami yük ağırlığı: 33 kg, toplam ağırlık: 38 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/55 r22.5, Further Information Chassis: Semi-trailer for Container Fine-grain steel welded construction, fifth wheel plate with replaceable kingpin (2 positions available) Container Mounts: - 1 x 20-foot container centered, without steel/aluminum checker plate in the rear area - 2 x 20-foot or 1 x 40-foot container with gooseneck tunnel No rear height adjustment and no foldable intermediate supports; transport of containers without tunnel not possible. 24 t, 2-speed landing gear, single-sided operation, straight base section, without compensating brace 2 wheel chocks with holder Side underrun protection: aluminum Rear underrun protection: galvanized steel Half-shell mudguards With anti-spray splash flaps according to EC directive Rear impact protection Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Axle spacing offset (mm) for intermodal transport, up to 44 t gross combination mass Air suspension Brake System 2-line compressed air braking system Color-coded pipe routing for easier servicing Spring-actuated parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by tractors that guarantee effective ABS operation! With raise & lower valve Vehicle driving stability system Axle load detection via EBS CAN bus signal, for display in the driver’s cab (truck must be factory-prepared; no truck installation, not a calibrated scale) Wheels & Tires 385/55 R22.5, manufacturer at supplier’s discretion Steel rims, factory silver Electrics 24 V, multi-chamber lights, tail & brake lights in LED, side yellow LED lighting (Note: For certain towing vehicles, false diagnostics may occur although function is provided.) 2 white position lights in front 2 white/red lane marker lights at rear Djdpoi Riv Nefx Aldscg 2 x 7-pin non-interchangeable sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via reverse light Operational Notes Note: Transport of filled tank containers is excluded! Country of Registration/Signs Germany With Dekra approval and inspection report (in accordance with §13 EC-FGV) Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, sides white and rear red Paintwork Chassis DB 7350 Nova grey 10-year corrosion warranty Note: Archive images!

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902029968, boş ağırlık: 6.100 kg, azami yük ağırlığı: 28.900 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2022, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 3.000 mm, süspansiyon: hava, lastik boyutu: 435/50 R19,5", The images are archive photos; the vehicle may still be in use! Dcsdpfx Ajwk Dckjldeg Specifications available upon request!

Koşul: ikinci el, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2015, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.520 mm, Donanım: ABS, Schmitz Cargobull S01 platform treyler, kaldırılabilir aks ve SAF akslar Sorgular için dahili numara: 1225958 * ABS * EBS * 3 adet havalı süspansiyonlu aks * Kaldırılabilir aks * Disk frenler * SAF akslar Yükleme alanı uzunluğu: Uzunluk: 13.600 mm * Genişlik: 2.520 mm Lastikler: Djdpfx Alsyavigedjcg 1. aks: 385 / 55 R 19,5 %30, havalı süspansiyon / kaldırılabilir aks 2. aks: 385 / 55 R 19,5 %30, havalı süspansiyon 3. aks: 385 / 55 R 19,5 %30, havalı süspansiyon ----Fiyat: 3.900,- EUR + %19 KDV Daha fazla bilgi için aşağıdaki telefon numaralarından bize ulaşabilirsiniz: * Konuşulan diller: Almanca, İngilizce, Fransızca, Lehçe ve ???? Yazım hataları, yanlışlıklar ve ara satış hakkı saklıdır.

Koşul: yeni, azami yük ağırlığı: 25.050 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 950 mm, toplam genişlik: 2.550 mm, Gross weight: 35,000 kg / 48,000 kg Unladen weight: 9,950 kg Payload: 25,050 kg / 38,050 kg Total length: 21,000 mm Loading length: loading area inside approx. 13,500 mm / max. loading length 21,000 mm Width: 2,550 mm Loading height: 950 mm Further information: Brand new vehicle from current production, available from approx. calendar week 8/2026 Rear support telescopic 4 wheel chocks with holder 4 pairs of recessed container locks in the floor for 1x 40 ft. container or 2x 20 ft. containers 1 spare wheel holder for 1 spare wheel, with wheel fixing kit, basket design 11 pairs of stake pockets integrated into the outer frame, suitable for FR insertable stakes 80x50 mm, flush-mounted in the outer frame, with slot for lashing belt or chain hooks Dcodoumha Nopfx Aldog 20 plug-in stakes, W=80/T=50/L=1500 mm 1 plastic toolbox 3 pairs of lashing eyes, each 3.5 t, integrated into the side frame - neck area 13 pairs of folding lashing rings, each 10,000 daN, freely swiveling in the side frame profile (also suitable for oversize lashing) 1 pair of folding lashing rings, each 10,000 daN, installed laterally in the intermediate support Air suspension with raise and lower function 1st axle automatic lift axle, additionally with forced lowering including traction aid, operated by control button on the semi-trailer, no cabin actuation with raise & lower valve and auto-reset function Wheels and tires: 235 / 75 R 17.5" Steel rims in twin arrangement, factory silver 24 volt, multi-chamber rear lights, side marker LEDs in yellow 2 white LED position lights front 2 white/red LED lane departure lamps rear 2 x 7-pin and 1 x 15-pin tamper-proof sockets at front, without connecting cable 2 additional LED work lights at rear, switched via reversing light 1 removable beacon mounted on underrun protection 1 x 7-pin socket at rear 6 side sockets, 2x front wall, 2x support legs, 2x rear (left + right), 7-pin 2 work lights, flush-mounted at top of front wall, including switch 2 pairs of oversize signs, each with 2 LED clearance lights per sign, extendable sideways to 3,500 mm, signs additionally attachable to loading area (width adjustable steplessly) Fixed steel front wall, 1,200 mm high, with robust steel corner posts without corner bevel, straight on the sides 2 lashing holes, top inside and outside, in the front wall corners Frame front hot-dip galvanized + visible outer frame final coating in RAL 3002 carmine red Frame rear hot-dip galvanized + visible outer frame final coating in RAL 3002 carmine red Front wall in RAL 3002 carmine red

Koşul: yeni, azami yük ağırlığı: 8.840 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New Fliegl Tandem Low Loader with Ramps, Type TPS 118 Chassis fully hot-dip galvanized – side walls aluminum Vehicle in ongoing production – delivery time approx. two weeks Gross weight: 11,800 kg Unladen weight: 2,960 kg Payload: 8,840 kg Overall length: 8,000 mm Loading length: 6,200 mm including rear slope Width: 2,550 mm Loading height: 900 mm Further Information plus pre-transport / provisioning ex stock location 26639 Wiesmoor €1,280.00 net Loading width: 2,480 mm Chassis: central axle trailer High-tensile steel welded construction Outer frame slightly angled, new design with "Load-Lock profile" for attaching lashing straps 3 pairs of lashing rings (external, in floor), each 5 t 1 in front corners, 1 at and 1 within the rear slope Pair of lashing rings (external in the floor/outer frame), each 5 t Support leg at the front Foldable rear supports 2 wheel chocks with holders Side underrun protection, aluminum Rear underrun protection, galvanized steel Full-width rear mudflap (not in combination with forklift holder) Partial round fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Dcsdpfx Alsv E Dqledjg Towing equipment: central axle trailer Drawbar with tested 40 mm towing eye Drawbar height adjustable by spindle, max adjustment range 300 mm Axles & Suspension GFA axles with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load balancing (rocker equalization) Brake system Two-line compressed air braking system Color-coded piping for easier servicing Manual spindle parking brake 2 non-interchangeable coupling heads at front, with connecting lines to the towing vehicle 24 Volt ABS and ALB, with ABS plug at the front and connection cable Note: The trailer must only be towed by vehicles that ensure the effectiveness of the ABS! Wheels and Tires 4 x 235/75 R17.5, brand at manufacturer’s discretion 4 steel rims, factory silver Electrics 24 Volt, multi-chamber lighting, lateral yellow LED lighting 2 white front position lights in LED 2 white/red marker lights at rear 2 x 7-pin non-interchangeable plugs at front, with connecting cable Floor Steel/chequer plate flooring for high point load tolerance Note: Slight floor undulation due to welding distortion possible! Platform length approx. 6,200 mm Rear inclination approx. 900 mm Front wall/corner stanchions 25 mm aluminum box section, 400 mm high Side walls 25 mm aluminum box section, 400 mm high, foldable and removable Middle stanchions 1 pair folding stanchions, sidewall height, foldable and removable Rear wall/rear corner stanchions 1 pair steel stanchions attached to frame, with holders for securing the ramps Entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with grab handle on ramps wooden covering (tip area with steel/chequer plate) gas spring assisted for single-person operation Paintwork Chassis hot-dip galvanized including passivation “15 years warranty against rust-through” Front wall painted RAL 9006 White Aluminum Drop sides painted RAL 9006 White Aluminum Loading ramps hot-dip galvanized Finance lease offer: 48 months term, down payment only VAT, residual value 40%, monthly installment EUR 350.00

Koşul: ikinci el, azami yük ağırlığı: 15.620 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2017, toplam genişlik: 2.550 mm, toplam yükseklik: 1.150 mm, Üretim yılı: 2017, Donanım: ABS, Fliegl FLT 216 2-Axle Dolly First registration: 31-03-2017 2x BPW axles Air suspension Tyres: 385/55 R22.5, approx. 30% tread remaining Drum brakes with ABS and EBS Gross weight: 18,000 kg, unladen weight: 2,380 kg, payload: 13,620 kg Dcedpfx Alowbxtxodeg Telescopic drawbar Minimum distance between fifth wheel plate and towing eye: 420 cm, extendable by 80 cm up to 500 cm Fifth wheel height: approx. 115 cm Towing eye height: approx. 45-50 cm Hot-dip galvanised chassis Approved for NL Dolly operation Errors, omissions and prior sale excepted.

Koşul: ikinci el, azami yük ağırlığı: 15.620 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2017, toplam genişlik: 2.550 mm, toplam yükseklik: 1.150 mm, Üretim yılı: 2017, Donanım: ABS, Fliegl FLT 216 2-Axle Dolly First registration: 31-03-2017 2x BPW axles Air suspension Tyres: 385/55 R22.5, approx. 30% tread remaining Dcjdpfx Ajvv Anqsldog Drum brakes with ABS and EBS Gross weight: 18,000 kg, unladen weight: 2,380 kg, payload: 13,620 kg Telescopic drawbar Minimum distance between fifth wheel plate and towing eye: 420 cm, extendable by 80 cm up to 500 cm Fifth wheel height: approx. 115 cm Towing eye height: approx. 45-50 cm Hot-dip galvanised chassis Approved for NL Dolly operation Errors, omissions and prior sale excepted.

Koşul: ikinci el, boş ağırlık: 11.130 kg, azami yük ağırlığı: 36.870 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2019, süspansiyon: hava, lastik boyutu: 235/75 R 17,5 140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5 140J, arka lastik boyutu: 235/75 R 17,5 140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, 4 adet tekerlek yuvası kapaklı, sabitleme halkaları, rampalar ve destekler için elektrohidrolik pompa, -- baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler --, daha fazla bilgi için: !, More Details: ! Dedpfxjy Igvhj Aldjcg

Koşul: yeni, yatak sayısı: 4, renk: beyaz, toplam uzunluk: 6.830 mm, toplam genişlik: 2.320 mm, toplam yükseklik: 2.570 mm, dingil konfigürasyonu: 1 dingil, toplam ağırlık: 1.500 kg, Fonksiyonellik: tamamen fonksiyonel, Donanım: banyo, park ısıtıcısı, tek kişilik yataklar, The CaraCito – consistently different. It starts with the fully electric equipment and ends with an unbeatable price-performance ratio. However, compromising on quality is not its style. Instead, it features a minimalist, youthful interior design that is truly eye-catching. CaraCito Highlights: No gas (optionally available with gas package), unique design. Consistently different, consistently modern, and consistently electric. The CaraCito stands out in many ways and impresses with WEINSBERG’s proven design and quality standards. Dcodpfxoybvz Se Aldeg In addition to the standard equipment, this vehicle includes the following extensive special equipment: - Service hatch front right - Service hatch front left - Service hatch rear right - Midi-Heki in the rear - Insect screen door - GRP roof (standard in Cito for aluminum) - Opening window in bathroom incl. cassette combo blind 60 x 52 cm - Opening front window 100 x 62.4 cm - Central roof hatch, clear - Opening window front right 90 x 52 cm - Opening window rear left 70 x 51 cm - Opening window rear 90 x 52 cm - Spare wheel holder in gas locker - Increased gross weight to 1,500 kg - Jockey wheel with integrated load indicator - Wheel trims - Break system (self-adjusting brakes) - ESP-ETS-Plus - LED recessed spots above seating area - Folding worktop extension - Electric underfloor heating - Roll-out bed function - Upholstery: Sweet Chestnut Cara-Cito Package includes: - Combi-blinds on the windows, including blackout and insect screens - Heavy-duty winding supports - Stabilizer safety coupling - Hydraulic shock absorbers - Awning light with rain gutter in LED technology - 45-litre fresh water tank, fixed installation Gas Package includes: - Gas locker with large external hatch - TRUMA S gas heater incl. air circulation system - Refrigerator - 2-burner hob for gas operation Shower Package includes: - TRUMA Therme with connections for kitchen and bathroom (230V operation only) - 25-litre wheeled waste water tank - Shower installation in washroom: shower fitting with holder and curtain - Shower tray Socket Plus Package includes: - Additional 230V SCHUKO socket in seating area - Additional 230V SCHUKO socket in sleeping area - Additional 230V SCHUKO socket (kitchen, 1 unit) - USB socket (1 unit) in seating area - USB socket (1 unit) in sleeping area Of course, we also offer you a customized financing solution, with or without down payment. Low monthly payments, thanks to up to 180-month terms! Regular sales price with above equipment: €29,767 Special price without trade-in Permanent exhibition of Knaus / Weinsberg / Tabbert vehicles. Our own specialist workshop with on-site inspection and gas certification. We look forward to your visit! Errors, typographical mistakes and prior sale reserved. This listing does not constitute a legally binding assurance. Individual inspection of the vehicle is necessary and part of this offer.

Koşul: ikinci el, kilometre: 358.000 km, güç: 375 kW (509,86 bg), ilk tescil: 06/2020, yakıt türü: dizel, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, frenler: retarder, renk: yeşil, vites türü: otomatik, emisyon sınıfı: Euro 6, yükleme alanı hacmi: 24 m³, yükleme alanı uzunluğu: 6.000 mm, yükleme alanı genişliği: 2.300 mm, yükleme alanı yüksekliği: 1.600 mm, Üretim yılı: 2020, Donanım: ABS, elektronik denge programı (ESP), klima, Mercedes-Benz Arocs 4451 Fliegl Asphalt Tipper Push-off Sliding Tarp Lift/Steering Axle Euro 6 Dedpfxey Eug No Aldecg Internal Ref. No. for Inquiries: 0426380 * Condition: Very good * Power: 375 kW / 510 HP * Unladen weight: 17,500 kg * Gross vehicle weight: 40.00 t * Suspension: Leaf/Air * ABS * ASR (traction control) * ESP (electronic stability program) * Rear axle differential lock * PTO (power take off) * Push-off system * Emission standard: EURO 6 * Transparent external sun visor * Air-suspended comfort driver's seat * Driver's seat heating * Air conditioning * 24/12V connection * Electric windows (driver/passenger) * Electrically heated and adjustable mirrors * CD radio / USB / AUX / Bluetooth * Mechanical roof hatch * Multifunction steering wheel * Onboard computer * Fog lights * Fuel tank: 290 L aluminum, left side * Light and rain sensor * Lift axle * Steering axle Body: Asphalt tipper with moving floor * Thermo-insulated body * Manufacturer: Fliegl * Electric sliding tarp * Remote control Tyres: 1st axle: 385/65 R22.5 30% leaf suspension 2nd axle: 385/65 R22.5 20% leaf suspension, steering axle 3rd axle: 315/80 R22.5 25% air suspension 4th axle: 315/80 R22.5 25% air suspension 5th axle: 385/65 R22.5 20% air suspension, lift axle, steering axle --- Price: 64,900 Euro + 19% VAT. For further questions, you can reach us at the following phone numbers: We speak: German, English, French, Polish, and ????? Subject to errors, omissions, and prior sale.

Koşul: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11-ton BPW axles * Traction aid for shunting purposes, activated on the first axle via EBS (no truck-side installation required) * The last axle as a self-steering trailing axle with electro-pneumatic steering lock * Locking of the trailing axle for shunting purposes, controlled from the driver's cab via EBS (no truck-side installation required) Dodpfx Alsykx Nkedocg ----Suspension: * Air suspension with lift and lower function as well as Ride height control valve ----Electrical / Lighting: * Smart-Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * Removable LED rotating beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for extended length lighting * Side marker lights with indicator function * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swiveling supports at the rear of the chassis * Straight sheet steel mudguards * Spare wheel holder in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection lines from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with hinged lid * 400 mm high aluminium drop and removable side walls (in RAL color of choice) on the fifth wheel platform * Rear wall —150 mm— plugged in high * Rear slope on the fifth wheel platform to the low-bed, approx. 700 mm long with checker plate covering and a perforated strip at the end for attaching aluminium drive-on ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, low bed platform with 60 mm clamped wooden floorboards * Checker plate over the axles * 9 mechanical folding wideners to 3 m overall width (excluding rear slope); widening planks available with closed transverse storage compartment underneath the load platform * Preparation for 3 insertion shafts under the fifth wheel platform to store either aluminium drive-on ramps or wooden planks for covering wheel recesses * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated external frame, 45° bent, with hole pattern for lashing devices (2 t lashing capacity per point at a minimum distance of 480 mm) * 3 x 13.4 ton lashing rings recessed to the side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low Loader Platform: * 3 x 13.4 ton lashing rings on each side of the external frame (1 x at the start of the fifth wheel step, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 ton lashing rings on each side (1 x between the front wheel recess and first axle, 1 x between 2nd and 3rd axle) * 3 x 5 ton lashing rings screwed to each side of the external frames of the wheel recesses (2 at the front, 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last

Koşul: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Maneuvering aid for shunting purposes on the first axle, activated via EBS (no truck-side installation required) * Rear axle as self-steering axle with electro-pneumatic steering lock * Steering lock for the trailing axle, operated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function and RTR valve ----Electrics / Lighting: * Smart-Board installed on the trailer as an info tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for length extension lighting * Side marker lamps with indicator function * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Support winds at the front and swiveling supports at the rear on the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swivel arm as a carrier for connection cables from the truck to the semi-trailer ----Lowbed Deck: * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and tool box at the front made of galvanized, powder-coated steel B = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high drop-side aluminium boards on the sides of the fifth wheel platform (in RAL color of choice), foldable and removable * Rear wall insertable, 150 mm high * Rear slope on the fifth wheel platform, approx. 700 mm long with chequer plate surface and at the end a perforated bar for hooking in aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 x mechanical fold-out extensions to 3 m total width, except on the rear slope (extension boards available with closed storage compartment crosswise under the loading area) * Preparation for 3 mounting shafts under the fifth wheel platform to store either aluminium loading ramps or wooden planks for wheel well covers * Preparation for container locks on the swan neck ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled with hole pattern for lashing points (2 t lashing force per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal beams after necking, and 1 x above the center axle next to the longitudinal beam) Lowbed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the fifth wheel platform neck, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel well and 1st axle, and 1 x between 2nd and 3rd axles) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel well (2 on the front wheel well, 1 on the rear wheel well) ----Excavator boom support: Dcsdsykx Nqepfx Aldjg * Extended excavator boom support from the end of the last rigid axle, over the steering axle, up to the end crossmember, continuous with internal reinforceme

Koşul: ikinci el, azami yük ağırlığı: 36.540 kg, toplam ağırlık: 48.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2020, bir sonraki muayene (TÜV): 05/2028, Üretim yılı: 2020, Donanım: ABS, Dahili araç no: G400133 Kaufungen - Kassel, Almanya’daki tesisimize sevk halinde, hemen teslim edilebilir. Daha fazla BİLGİ için Luis Lucena Alçak Yarı Römork LANGENDORF SATÜ 30 – 10,0 M Teker havuzlu Model yılı: 2020 Uzaktan kumanda 3 dingil – 2 yönlendirilebilir – 1 kaldırılabilir Uzunluk: 13.900 mm Yükleme alanı: 10.000 mm Teknik olarak izin verilen toplam ağırlık: 48.500 kg Boş ağırlık: 11.960 kg Hatalar olabilir. Kullanılmış aracınızı memnuniyetle takas ederiz. Finansman imkanımız mevcuttur. Dodoy A Uxaepfx Aldecg GOLEC NUTZFAHRZEUGE GMBH Konuşulan diller: Almanca, İngilizce, İspanyolca, Lehçe, Ukraynaca, Rusça, Bulgarca.

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2005, renk: siyah, Üretim yılı: 2005, Donanım: ABS, - Stepne Dedpfx Alsxw T Uajdscg - Çift tekerlek dingili

Koşul: ikinci el, boş ağırlık: 8.900 kg, azami yük ağırlığı: 40.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2025, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2025, Donanım: ABS, With every used semi-trailer, you receive a current and complete inspection and functional report. Chassis: - Robust steel frame welded construction with front frame neck and flat loading area with rear taper approx. 500x100 mm - Neck height 200 mm with chamfered front corners - Inclined goose neck end approx. 500 x 100 mm (climbing ribs along the outer frame in the rear taper area) - Two kingpin positions with exchangeable 2” kingpin - Outer frame closed outward, constructed as a slotted outer frame - Loading platform with extendable central beam, can be extended by approx. 2,000 mm, pneumatically lockable at 500 mm intervals - Frame before and after division with 80x80 mm step - Reinforced frame design / point load in retracted position at the center of gravity - No extendable load bed wideners, but prepared for retrofitting (= guide tubes welded into frame) - With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after the 2nd axle to the end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), approx. 400 mm deep - Underrun protection = extended end plate - Drop leg supports at rear Floor: - 35 mm larch timber flooring with aluminum omega profiles Axles, steering, and tires: - BPW air suspension axles, 10 to axle load each, air spring diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering system with total stroke approx. 200 mm - Second driving position via ball valve +50 mm - First axle as lift axle (wired via EBS), fully automatic activation with manual emergency actuation via push button on the trailer - Third axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-bolt, hub-centered - 12 tires, 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring system Accessories: - Plug-in side boards and rear board on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum impact protection - 4 wheel chocks with holder - Elongated number plate holder in end plate - 1 ECE insertable reflector board at rear - 11 pairs of 10t side ZK lashing modules: - 2x on the gooseneck - 2x on the platform before extension - 7x after extension - No rear towing eyes - Extendable warning boards including 3 position lamps each at the front at the landing gear and rear before the end plate, steplessly extendable to loading width of 4,500 mm - 4 insertable sockets for warning boards in stakes pockets on the platform - 6 pairs of side stake pockets for 100x50 mm stake inserts - 2 rows of cross stake pockets for 100x50 mm stakes on the gooseneck from outer frame inward to main frame (1x before and 1x after kingpin positions) - 3 rows of cross stake pockets for 100x50 mm stakes on the load platform from outer frame inward to main frame (1x before extension, 1x after extension, and 1x after 3rd axle) - 2 pairs of steel plates in the platform for container locks to accommodate one 20ft container - Rubber apron mounted on underrun protection - Preparation (= cable routing for NATO cable and drilling pattern for later installation of NATO socket at the front end plate, as well as holder on the vehicle) for retrofitting electrohydraulic power unit on the right rear, for possible control of loading ramps Optional: The trailer is available with aluminum approach ramps. Dodpoywv Ixefx Aldocg

Koşul: yeni, azami yük ağırlığı: 26.500 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.450 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, WIESE 3-axle low-loader with ramps and wheel recesses – NEW Availability approx. 4 months from order ---Vehicle Data--- Manufacturer: WIESE Type: WSA 3-36 TL Year of manufacture: 2025 Axles: 3 Gross vehicle weight: 39,000 kg Dcodpfxeyuq Igs Aldjg Fifth wheel load: 12,000 kg Axle group max load: 27,000 kg Unladen weight: approx. 9,500 kg Tyres: 235/70 R17.5 Brakes: WABCO EBS with RSS ---Dimensions--- Loading platform length: 13,450 mm Low-bed length: approx. 9,550 mm Gooseneck length: approx. 3,640 mm Overall width: 2,550 mm Loading height low-bed: approx. 920 mm Fifth wheel height: approx. 1,250 mm ---Equipment--- 3 x SAF axles (9 t) with air suspension 1st axle: Lift axle 3rd axle: Follower axle with steering (lockable) Electronic air suspension E-TASC WABCO EBS braking system with Roll Stability Support Tire pressure monitoring system for 12 tyres Complete LED lighting 4 x LED work lights 15-pin socket + 2x 7-pin sockets ---Body--- Robust steel frame 28 mm hardwood floor / omega floor 13 pairs of lashing rings (8,000 kg) Additional lashing points (5,000 daN) 2 pairs of wheel recesses Excavator arm recess Aluminium plug-in side boards on the raised platform Front-mounted toolbox ---Ramps--- 2 x aluminium drive-on ramps Dimensions: approx. 2,800 x 600 mm Load capacity: 27,460 kg Spring lift assistance Sideways adjustable ---Other Features--- Warning plates for overwidth up to 3 m Contour marking as per ECE-R48 Technical documentation and TÜV report For further information, please do not hesitate to contact us.

Koşul: yeni gibi (sergi parçası), boş ağırlık: 10.000 kg, azami yük ağırlığı: 30.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 4x2, yükleme alanı uzunluğu: 9.220 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 235/75 R17,5, Üretim yılı: 2025, Donanım: ABS, merkez döner tabla, tır çekici bağlantısı, HTD 40K-RM-BM_ Internal dimensions: approx. 9,220 mm x 2,540 mm Dcodpeiciutjfx Aldjg Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm Permissible gross weight: 24,000 kg Payload: approx. 14,000 kg Tyres: 235/75R17.5 inches Loading height: approx. 900 mm Drawbar length: approx. 1,500 mm Coupling height: approx. 820–1,000 mm Ramp angle: approx. 10° Ramp length: approx. 3,150 mm Ramp width: approx. 750 mm Permissible gross weight (special version): 40,000 kg Payload (special version): approx. 30,000 kg Low-bed length: approx. 6,610 mm Overall dimensions (LxWxH): 11,200 Technical gross weight: approx. 44,000 kg Technical axle load: approx. 11,000 kg 6 pairs of lashing points, 3,000 kg per lashing point Lashing points in the outer frame of the low-bed 4 pairs of lashing points, 3,000 kg per lashing point Lashing/stake pockets 3 t in the outer frame of the high-bed 1 pair of lashing points, 3,000 kg per lashing point Lashing/stake pockets 3 t in the outer frame of the low-bed Suspension: Air suspension unit including lifting and lowering, acting on the rear axle group Brake system: Brake system according to EC directives with EBS 4S/3M in multi-voltage version (12–24V), spring-loaded parking brake including 2 external test connections for brake/modulator and air bellows pressure Electrics: Lighting in LED version with flashing function for side marker lights, multi-voltage (12–24V) Turntable: Heavy-duty welded construction with low-maintenance ball bearing turntable Towing device: Cranked towing bar with 50 mm towing eye, low-maintenance silent bushings, including height adjustment for towing bar Frame: Heavy-duty welded construction made of high-strength fine-grained steel Continuous cross members for maximum stability Wheel recesses at the front (length at top approx. 2,500 mm, depth approx. 410 mm) and rear (length at top approx. 1,470 mm, depth approx. 370 mm); without wheel recess covers Excavator trough (length 1,650 mm, width 750 mm, depth 190 mm) Wheel cutouts over the rear wheels with wheelbase 2,010 mm, front corners chamfered Rear climbing strips on the ramp slope for maximum safety during loading and unloading 4 pairs of stake pockets (90x50 mm) in the outer frame (high-bed) 1 pair of stake pockets (90x50 mm) in the outer frame (low-bed) Floor: 50 mm softwood floor (painted/impregnated) Ramps: Single-piece hot-dip galvanized drive-on ramps (3,150 mm x 750 mm) with 50 mm softwood covering (painted/impregnated), laterally adjustable Direct-acting standing spring lifters for easiest operation Finishing: Chassis frame hot-dip galvanized by immersion Support: 2 folding supports at the rear, left and right at the vehicle rear Equipment: Folding side underrun protection Front: semicircular plastic mudguards Rear: straight steel mudguards with anti-spray 2 wheel chocks with holder Contour marking in accordance with ECE Regulation R48 Wheel recess covers front: With 3 pairs of stake pockets, without covering (covers retractable under the longitudinal members) 975.00888 Hardwood covering for front wheel recess cover Wheel recess cover rear With 1 pair of stake pockets, without covering (cover retractable under the longitudinal members) 975.00897 Hardwood covering for rear wheel recess cover 3 pairs of 6 t lashing rings, bolted 3 m equipment package without slope, B=11,200 Folding extension arms with softwood boards 970.04199-36 LED warning package HTD cranked Aspöck warning plates (4 pieces), electrics and revolving beacon 1 pair of stow

Koşul: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting on the first axle, activated via EBS (no truck-side installation required) * Rearmost axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function, including ride height control valve ----Electrics / Lighting: * Smart-Board mounted as infotool on trailer with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12/24 V * Removable LED rotating beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel wheel arches * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swivel arm as carrier for connection cables from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with front edges chamfered at 45°, front toolbox made of galvanised, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminium drop sides on the platform (in RAL colour of choice), fold-down and removable * Rear board plugged in, 150 mm high * Rear chamfer at the platform leading to the lowbed, approx. 700 mm long with checker plate covering and a perforated strip at the end for hooking in aluminium approach ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over axles * 9 mechanical folding widenings to 3 m total width (excluding rear chamfer), widening planks included, with lockable transverse storage compartment under the loading area * 3 storage compartments under the platform for optional aluminium approach ramps or wooden planks for wheel well covering ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum spacing 480 mm) * Each side equipped with 3 sunken 13.4 t lashing rings in the floor (1 on the platform, 1 on the longitudinal beams after the gooseneck, 1 above the middle axle next to the longitudinal beam) Low Loader Platform: * Each side equipped with 3 x 13.4 t lashing rings on the outer frame (1 at start of gooseneck, 1 at start of drive-on chamfer, 1 at end of drive-on chamfer) * Each side with 2 x 10 t lashing rings (1 between front wheel well and 1st axle, 1 between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frames of the wheel wells (2 at the front and 1 at the rear wheel well) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle across the steering axle to rear crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * Each side with 2 x 6.4 t lashing rings Dcodpfx Aleq Euakodeg

Koşul: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start assist for shunting operations activated on the first axle via EBS (no installation required on the truck side) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Trailing axle lock for shunting, controlled from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with raising and lowering function and ride height control valve ----Electrics / Lighting: * Smart-board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring with display capability in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Side underrun protection * Support legs at the front and swivel jacks at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning board kits at front and rear * Pivoting arm as carrier for connection lines from truck to semi-trailer Dcodpfxotpta De Aldjg ----Low Loader Platform: * 2nd king pin position * Semi-trailer platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * Removable and fold-down 400 mm high aluminum sideboards on the semi-trailer platform (in custom RAL color) * 150 mm high inserted rear panel * Rear bevel on the semi-trailer platform to the low-bed area, approx. 700 mm in length, with checker plate covering and a perforated strip at the end for hooking on aluminum drive-up ramps * Semi-trailer platform with 50 mm clamped wooden planks; low-bed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 mechanical folding extensions to a total width of 3 m, not in the rear bevel (extension planks available with enclosed transverse storage compartment under the loading area) * 3 storage compartments under the semi-trailer platform for optional storage of aluminum ramps or planks for covering wheel recesses ----Load Securing (LaSi package): Semi-trailer platform: * Perforated outer frame angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the semi-trailer platform, 1 on the longitudinal member after the step-down, and 1 above the center axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings per side on the outer frame (1 at the start of the step-down, 1 at the start of the ramp, 1 at the end of the ramp) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel recesses (2 on the front, 1 on the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, running from the end of the last rigid axle over the steering axle to the rear cross member, continuous, with internal reinforcement profile, approx. width 770 mm, rear depth 270 / front depth 170 mm * 2 x

Koşul: yeni, boş ağırlık: 8.900 kg, azami yük ağırlığı: 40.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.900 kg, Chassis: - Robust welded steel frame construction with front frame downturn and flat loading area, rear chamfer approx. 500x100 mm - Neck of the frame: 200 mm with beveled front corners - Sloped end of gooseneck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear bevel) - 2 king pin positions with replaceable 2” king pin - Outer frame closed on the outside as a perforated outer frame - Loading platform with extendable central beam, extendable by approx. 2,000 mm, lockable pneumatically in steps of 500 mm - Frame before and after extension section with 80x80 mm step - Reinforced frame design / point load optimized in retracted state at the center of gravity - No extendable widening elements in the loading area, but prepared for retrofitting (guide tubes welded in frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle and extending to the rear end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection: extended end plate Dcodpfxoxnnk De Aldog - Drop down support legs at the rear Axles, Steering, and Tyres: - BPW air suspension axles, each with 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired to EBS), automatic confirmation with manual emergency operation via button on the trailer - 3rd axle is a friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with hub-centred offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Tire pressure monitoring included Accessories: - Removable side and rear boards on gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminium underride protection - 4 wheel chocks with holders - Elongated license plate bracket on end plate - 1 removable ECE sign at the rear - 11 pairs of ZK modules 10t at the sides: - 2x on the gooseneck - 2x on the loading area in front of the extension - 7x after the extension - Extendable warning panels incl. 3 position lamps each, at front on landing gears and rear before end plate, steplessly extendable to a load width of 4,500 mm - 4 holders for warning panels, mountable in stake pockets on the loading area - 6 pairs of side stake pockets for stakes 100x50 mm - 2 rows of transverse stake pockets for stakes 100x50 mm on gooseneck, from outer frame inwards to main frame (1x before and 1x after king pin positions) - 3 rows of transverse stake pockets for stakes 100x50 mm on loading area, from outer frame inwards to main frame (1x before the extension, 1x after the extension, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks suitable for 1x 20ft container - Rubber skirt fitted to underrun protection The trailer is optionally available with ramps.

Koşul: yeni, boş ağırlık: 8.490 kg, azami yük ağırlığı: 40.510 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.490 kg, Donanım: ABS, Chassis: - Robust welded steel frame construction with front frame drop and level loading area, rear taper approx. 500x100 mm - Neck height 200 mm with beveled corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper) - 2 king pin positions with interchangeable 2” king pin Dcjdpewu A Slefx Aldog - Outer frame closed on the outside as a perforated outer frame for lashing with tie-down straps - Reinforced frame design / point load at the center of gravity - Prepared for extendable load width extensions - With excavator recess (open type), depth approx. 220 mm, width approx. 600 mm, beginning just after 2nd axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underrun protection = extended end plate - Drop-leg stabilizers at rear Floor: - 35 mm larch wood floor with aluminum omega profiles Axles, Steering, and Tires: - BPW air suspension axles, each with 10 t axle load, air bellow diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lowering mechanism, total travel approx. 200 mm - 2nd ride height setting via ball valve +50 mm - 1st axle lift axle (wired via EBS), confirmation fully automatic with mechanical emergency operation via pushbutton on trailer - 3rd axle is a friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Brake System: - Dual-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Paintwork: - Steel shot blasting, chassis spray galvanizing and priming - Painting of chassis/hub/outer frame in DB 7350 Novagrau Accessories: - Removable drop sides and tailboard on gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks - Metal mudguards with Clear-Pass - Long number plate holder integrated in end plate - 1 removable ECE plate at rear - 11 pairs of ZK-modules 10t side-mounted: - 2x on the gooseneck - 9x on the loading area - Without rear towing eyes - Extendable warning signs incl. 3 position lamps each, at the front at landing gear and rear before end plate, infinitely extendable to a loading width of 4,500 mm - 4 holders for warning signs, insertable in stake pockets on loading area - 6 pairs of side stake pockets for insertable stanchions 100x50 mm - 2 cross rows of stake pockets for insertable stanchions 100x50 mm on gooseneck, from outer frame to main frame (1x before and 1x after king pin positions) - 3 cross rows of stake pockets for insertable stanchions 100x50 mm on loading area, from outer frame to main frame (1x at the front area, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks to accommodate one 20ft container - Rubber apron mounted on underrun protection - Preparation (wiring for NATO cable and hole pattern for retrofit installation of NATO socket at front of end plate and bracket on vehicle) for subsequent installation of an electrohydraulic unit on the right rear side for possible ramp operation - Mechanical landing legs 24t, single-sided operation with load compensation Optionally, the trailer is available with aluminum approach ramp

Koşul: ikinci el, azami yük ağırlığı: 780 kg, toplam ağırlık: 900 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 03/1996, * 50348 – Vehicle ID for telephone inquiries * Complete trailer with Trave 470 motorboat, Honda BF50 outboard engine Dcedpewkz U Rofx Aldsg * Single-axle trailer with overrun brake, Manufacturer: Heku, Model: 705 D2, First registration: 13.03.1996, Permissible total weight: 900 kg, jockey wheel, NEW tires, NEW inspection (TÜV) * Dimensions LxWxH (trailer): approx. 6.00 x 1.80 x 1.30 m * Motorboat from the Water Rescue Service (DRK), multipurpose boat Travel 470 * Manufacturer: Schlichting Boats, Category: D * Length: 4.70 m, Width: 1.90 m, Side height: 0.50 m, Weight: 320 kg, Max. persons: 6, Max. payload: 700 kg * Engine: Outboard motor, Manufacturer: Honda, Model: BF50, Power: 36.8 kW, Year of manufacture: 1997, NEW service!!! ----Our email address:     Our services for you:      - Arrangement of temporary or customs license plates      - Europe-wide transfer/delivery      - Export customs clearance for vehicles to non-EU countries If you have any questions in Russian, you can call the following number.* WhatsApp just for Russian speakers:* WhatsApp for English, German, and other languages: