Kullanılmış Kässbohrer Tieflader Mit Hydr. Schwanenhals satın al (9.774)

Koşul: yeni, boş ağırlık: 6.650 kg, azami yük ağırlığı: 17.350 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, toplam uzunluk: 10.900 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5 (Doppelbereifung), renk: gümüş, vites türü: mekanik, şehir içi yakıt tüketimi: 1.090 l/100 km, Unladen weight: 6,650 kg, permissible total weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, - steel welded construction - turntable with heavy-duty ball-bearing slewing ring - foldable rear support - 1 spare wheel holder for 1 spare wheel, with wheel fastening kit - without spare wheel, - 1 plastic toolbox with shelf, dimensions 620mm x 360mm x 440mm (W/H/D), lockable with padlock - extendable side extensions up to 3,000 mm wide (not in the rear incline) - storage compartment for wooden planks underneath the low-bed area - 70 mm wooden planks for width extension to 3,000 mm - 1 pair of recessed ring lashing eyes at the front on the gooseneck, each rated at 5 t - 7 pairs of lashing mushroom anchors recessed at the top and side of the outer frame, each with a 10 t rating (1 x at the front on the gooseneck, 6 x in the low-bed area) - 5 pairs of stake pockets recessed in the outer frame, 70x40 mm internally - 2 additional pairs of folding lashing eyes, each rated at 10 t, 1x at the front on the gooseneck, 1x behind the 3rd axle - drawbar with 40 mm towing eye and 8° inclined towing eye - SAF drum brake axles - parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load equalization (rocker compensation) - 235/75 R17.5 - twin steel rims, factory silver - dual-line compressed air braking system - spring-loaded parking brake, ABS and ALB, with front connector, with connection cable - 24 volt, multi-chamber lights, side yellow LED lighting - 2 x 7-pin interlock-protected plugs at the front, with connection cable - 1 LED beacon with holder, switched via parking lights (removable beacon) - 2 pairs of warning panels with dual LED illumination, extendable to 3,000 mm - gooseneck front section with steel/chequer plate covering - storage box recessed into the transition incline to the gooseneck - thereafter with 70 mm softwood floor, in wheel arch area with steel/chequer plate covering - rear incline with 70 mm softwood floor - low-bed platform including rear incline: 6,500 mm - steel ramps: 2,800 mm long, 750 mm wide, laterally adjustable, surfaced with wood - additional ramp securing Cjdpfeyxh Rzex Aldogt

Koşul: ikinci el, boş ağırlık: 3.800 kg, azami yük ağırlığı: 18.000 kg, ilk tescil: 06/2000, lastik boyutu: 235/75/17,5, Üretim yılı: 2000, Dahili No: 5094 Sadece randevu ile görülebilir 40 km/s onaylı 80 km/s mümkün Süspansiyon: • 1. dingil: Havalı süspansiyon • 2. dingil: Havalı süspansiyon Fren: • 1. dingil: Kampana, yaylı fren • 2. dingil: Kampana, yaylı fren Lastik Donanımı: • 1. dingil: Çift teker • 2. dingil: Çift teker • Lastik ebadı: 235/75/17,5 • Diş derinliği %: 50 % • Jant tipi: Çelik Diğer Donanımlar: • Boş ağırlık: 3790 kg • Taşıma kapasitesi: 14210 kg • ABS • EBS • Dingil sayısı: 2 • Dingil üreticisi: BPW Cgjdpoy Hdwtsfx Aldet Ara satış, hata ve yazım hataları saklıdır.

Koşul: ikinci el, azami yük ağırlığı: 36.540 kg, toplam ağırlık: 48.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2020, bir sonraki muayene (TÜV): 05/2028, Üretim yılı: 2020, Donanım: ABS, Dahili araç no: G400133 Cedjy A Uxaepfx Aldegt Kaufungen - Kassel, Almanya’daki tesisimize sevk halinde, hemen teslim edilebilir. Daha fazla BİLGİ için Luis Lucena Alçak Yarı Römork LANGENDORF SATÜ 30 – 10,0 M Teker havuzlu Model yılı: 2020 Uzaktan kumanda 3 dingil – 2 yönlendirilebilir – 1 kaldırılabilir Uzunluk: 13.900 mm Yükleme alanı: 10.000 mm Teknik olarak izin verilen toplam ağırlık: 48.500 kg Boş ağırlık: 11.960 kg Hatalar olabilir. Kullanılmış aracınızı memnuniyetle takas ederiz. Finansman imkanımız mevcuttur. GOLEC NUTZFAHRZEUGE GMBH Konuşulan diller: Almanca, İngilizce, İspanyolca, Lehçe, Ukraynaca, Rusça, Bulgarca.

Koşul: yeni, azami yük ağırlığı: 23.800 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Complete specification available on request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = Raised front platform including neck, corners chamfered * Approx. 5,350 mm = Low-bed platform – flat loading area * Approx. 850 mm = Rear ramp slope * Overall width approx. 2,550 mm (or with extensions approx. 3,000 mm) * Loaded loading height approx. 870 mm * When assembling a combination, please ensure compliance with the legally permissible total height and length! Chassis: * Steel welded construction with front neck and chamfered rear * Ramp slope with excavator bucket recess in center = rear depression between main beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing rails (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, retractable approx. 10 t lashing rings (4x in the low-bed, 1x in the ramp slope, 2x on the raised platform) * Standard ball-bearing slewing ring Chassis Attachments: * Pull-out extensions with softwood planks approx. 50 mm on both sides of the low-bed platform (track width of construction machines to be transported must not exceed outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, allocation: 1 pair at front raised platform inside main beams; 1 pair at the very rear in the bucket recess left and right; 1 pair at front raised platform in front of the neck, inside main beams; 1 pair at the rear of low-bed in front of ramp slope, in the bucket recess left and right Towing Equipment: * Fixed drawbar with swivel towing eye approx. 40 + 50 mm, cranked design, silent bushing bearing, drawbar hold spring with tensioner * Truck coupling height from approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support Equipment: * 2 pcs. automatic folding rear supports Axles: * SAF air-suspension low-loader axles with drum brakes, axle load 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Wheels: * 12 pcs. tires 235/75 R 17.5, 141J, manufacturer according to factory selection Brake System/Suspension: * Brake system in accordance with ECE directive R13 * Two-line compressed air brake system * Manufacturer Wabco, EBS system 4S3M, 1st and 2nd axle monitored * RSS/RSP stability program * Spring-actuated parking brake on 2nd and 3rd axle * Brake/air connection lines with 2 individual couplings yellow/red * EBS/ABS connection cable * Air suspension with lifting/lowering facility (only on rear axles), automatic ride height adjustment from 15 km/h (RTR), with axle stop on front axle Assistance/Safety Systems: * SWIT – Schwarzmüller Intelligent Telematics * Axle load display via EBS CAN bus signal for display in truck cab (truck must be prepared accordingly, not a certified scale) * Tire pressure monitoring as per ECE directive 141, with pressure sensor in the wheels, for display in truck cab (display unit etc. must be available in the tractor unit) Floor: * Softwood floor approx. 50 mm, impregnated, projecting approx. 5–10 mm above frame upper edge * Steel checker plate covering above wheels Ramps: * 2 pcs. foldable single-piece lightweight steel loading ramps, length approx. 2,800 mm, width approx. 750 mm, with impregnated hardwood floor approx. 35 mm Codpfxsy Aug Rj Aldegt * Ramps adjustable in width from intermediate di

Koşul: yeni, azami yük ağırlığı: 30.860 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.550 mm, Donanım: ABS, Our complete vehicle inventory, including vehicles available immediately and at short notice, can be found on our website. Excerpts from the equipment list. Full equipment details available on request. Frame: * Steel welded construction with front frame drop, front corners chamfered and rear taper, drive-on ramp with centrally positioned excavator bucket recess = rear depression between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 4 pairs of approx. 4 t rated lashing brackets, 7 pairs of recessed, pull-out approx. 10 t lashing rings (2x on the raised platform, 1x in the front frame drop, 3x in the lowbed between the wheel recesses and 1x in the drive-on ramp) 2 pairs of wheel recesses: Cgedpfx Asy Auhneldot * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located at the front after the frame drop including one-piece drive-over aluminium cover, for max. surface load of approx. 11,650 daN/unit * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), located between the 3rd and 4th axles, including one-piece drive-over aluminium cover, suitable for the transport of wheel loaders with a wheelbase of approx. 2,700 - 3,600 mm, with wheel diameter around 1,485 – 1,740 mm, maximum wheel loader overhang at rear 2,220 mm * Width between the wheel recesses approx. 1,255 mm (= outer edge to outer edge of longitudinal beams) Frame attachments: * 5 pairs of receptacle sockets in the outer frame for square tube stanchions approx. 100 x 50 x 5 mm (3x in the lowbed, 2x on the raised platform) * Both sides of the lowbed platform extendable widening with softwood planks approx. 50 mm (track width of construction machinery to be transported must not exceed outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, arranged: 1 pair at the front of the raised platform inside the longitudinal beams, 1 pair at the very rear in the excavator bucket recess left and right, 1 pair at the front of the raised platform before the frame drop inside the longitudinal beams, 1 pair at the rear of the lowbed before the drive-on ramp in the excavator bucket recess left and right Drawbar: * Fixed drawbar with approx. 50 mm heavy-duty towing eye, cranked version, silent bushing mount, drawbar retention spring with tensioner * Truck coupling height from approx. 775 mm to approx. 975 mm * Drawbar length approx. 1,800 mm Support system: * 2 hydraulic rear supports – individually operated, control system housed in a separate stainless steel box Axles: * SAF air suspension low-bed axles with drum brakes, load capacity approx. 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Wheels: * 16 tyres 245/70 R 17.5, 146/146F, make: Conti HTR2 (tyre load capacity approx. 12 t/axle) Brake system/suspension: * Brake system according to ECE directive R13 dual-line pneumatic brake system * Wabco EBS system 4S3M, 1st and 3rd axle sensor-controlled * RSS/RSP – stability program * Spring-loaded parking brake on 3rd and 4th axles * Aluminium air tanks for total weight 44 t * Brake/air hose couplings with 2 individual coupling heads yellow/red * EBS/ABS connection cable * Retaining rubber for EBS and electric connectors * Air suspension with lifting and lowering function, front and rear individually operable * Automatic adjustment to programmed ride height from 15 km/h Assistance/safety systems: * SWIT – Schwarzmüller Intelligent Telematics Floor: * Softwood flooring approx. 50 mm, impregnated,

Koşul: ikinci el, boş ağırlık: 800 kg, azami yük ağırlığı: 2.000 kg, toplam ağırlık: 2.800 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/1993, bir sonraki muayene (TÜV): 03/2024, yükleme alanı uzunluğu: 2.473 mm, yükleme alanı genişliği: 1.725 mm, yükleme alanı yüksekliği: 366 mm, yükleme alanı hacmi: 1 m³, süspansiyon: çelik, lastik boyutu: 205 / 65 R 15, renk: yeşil, vites türü: diğer, ön lastik ölçüsü: 205 / 65 R 15, arka lastik boyutu: 205 / 65 R 15, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Base colour: green, Suspension: leaf springs, Payload (kg): 2000 Body type: robust twin-axle low-loader trailer, Body dimensions: 2,473 x 1,725 x 366 mm, BPW axle braked with shock absorber, 13-pin plug, jockey wheel, Tyres: 205/65 R15, Wooden panelling on side walls and floor, Rear support, Steel ramp 1,500 mm long (split), Very well-maintained overall condition. Csdjvlktyspfx Aldegt

Koşul: yeni, boş ağırlık: 4.680 kg, azami yük ağırlığı: 13.320 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.750 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 600 mm, süspansiyon: çelik, lastik boyutu: 245/70 R17,5, Möslein Tandem Damperli Düşük Yükleyici DTD 18 Schwebheim | Üç taraflı damperli, sürgülü rampalı | 13.320 kg taşıma kapasitesi | Yüksekliği ayarlanabilir çekiş kolu | ABS | Yükleme alanı uzunluğu: 5,75 m, genişlik: 2,35 m, yan duvar yüksekliği: 0,60 m | Arka tarafta katlanabilir destek ayakları | Lastikler: 435/50 R19.5, BPW akslar | Hatalar, yazım yanlışları ve ön satış hakkı saklıdır. Codoxztrmopfx Aldsgt

Koşul: ikinci el, boş ağırlık: 10.900 kg, azami yük ağırlığı: 43.600 kg, toplam ağırlık: 54.500 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/2025, yükleme alanı uzunluğu: 8.700 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 855 mm, lastik boyutu: 245/70 r17.5, renk: gri, Üretim yılı: 2025, işletme ağırlığı: 10.900 kg, Donanım: ABS, Gooseneck, rigid, central tube design: - Enclosed outer frame with cut-outs for lashing straps (LC 1,500 daN) - Steel floor covering with anti-slip coating - Including perforated rail for aluminium approach ramps - 2" king pin - Mechanically operated BPW landing legs - 550 mm long, 8° incline at the gooseneck end - Front wall including storage position for rear wall, 400 mm high - Spare wheel holder mounted upright at the front of the gooseneck - 3 pairs of recessed lashing rings LC 5,000 daN in the loading area of the gooseneck - Aluminium drop-in side walls, 400 mm high, consisting of 2x side walls (3,150 mm length) and rear wall with stanchions (galvanised) - Storage box rectangular, aluminium, folding lid, lockable, approx. 400 x 800 mm, centre - Storage box 45’, aluminium, folding lid, lockable, approx. 400 x 800 mm, left - Storage box 45’, aluminium, folding lid, lockable, approx. 400 x 800 mm, right Loading platform, single extendable: - Enclosed outer frame with cut-outs for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Sheet metal floor covering with anti-slip coating - Angled interface between fixed section and loading platform for bridging rails and wheel recesses - Excavator recess including longitudinal slots for cargo securing (LC 1,500 daN), approx. 3,850 mm length - Preparation for hydraulic ramp (electrical supply) - Outriggers for widening to 3,000 mm - Angled vehicle rear, 8°, 550 mm long - Sled design for easy installation and removal of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally located on loading platform behind gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally at the rear of the loading platform - 1 pair of stanchion pocket rails approx. in the centre of the loading platform - 1 pair of stanchion pocket rails on the fixed section - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic split folding ramps, 2,750+1,500x800 mm Cgsdpfx Aei Ai E Reldjt - Larch wood covering - Remote control operation (wired and wireless options) - Ramps with quick-change (dismantling) system Chassis: - Axle make: BPW ECO Max - 2 ride heights - 4 axles at 10 t each (technically 12 t) - Twin tyres 245/70 R17.5 - 2 x rigid axle and 2 x friction-steered axle - Reverse steering lock for friction-steered axle by engaging reverse gear - Brake system: Knorr brand (according to EU regulations with EBS-E) - TIM G2 from Knorr (Trailer Information Module) - RSS (Roll Stability Support) - Load-dependent lift axle on the first axle including starting aid (forced lowering of the lift axle via TIM possible) Accessories: - 4 wheel chocks with holders - 2 pairs of warning boards 423 mm x 423 mm, with 2 position lights and socket for beacon, infinitely adjustable up to 3,950 mm - Lashing options at gooseneck and on loading platform (alternatively on ramp, if present) included - Removable splash plate at the end of the excavator recess - Electro-hydraulic unit for ramp operation - Wireless remote control for ramp operation - Hydraulic support legs at vehicle rear for support during loading - 1 pair additional reversing lights at rear, activated with reverse gear - Wooden broadening planks – larch (option)

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2005, renk: siyah, Üretim yılı: 2005, Donanım: ABS, - Stepne - Çift tekerlek dingili Cgjdpfexw T Uasx Aldet

Koşul: ikinci el, ilk tescil: 01/1989, renk: kırmızı, Üretim yılı: 1989, Donanım: ABS, Langendorf 2-axle low loader with ramps ABS Tyres 60% remaining profile GR 10.5-20 10PR IDNR 686 We look forward to welcoming you for consultation, contract signing, or vehicle collection at our dealership. Please arrange an appointment in advance. If you are unable to visit us in person, we offer complete processing via telephone, e-mail, WhatsApp, or fax. On request, we can deliver your new vehicle directly to your doorstep, ensuring you the best price as well as maximum safety and convenience throughout the transaction. We are also happy to take your used vehicle in part exchange. We offer digital vehicle appraisals based on your vehicle photos – no need to visit our premises. Our specialised purchasing team guarantees you the highest possible price. Nationwide delivery is available for your 'new' used vehicle, with pick-up of your part exchange if desired – financing and leasing options available. Immediate approval and settlement of existing loans. Your specialist partner for passenger cars, vans, commercial vehicles, and construction machinery ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (Industrial Estate) Constantly over 400 vehicles in stock The information provided in advertisements, online listings, price tags, and images are non-binding descriptions and do not constitute guaranteed features. The seller accepts no liability/warranty for typographical or data transmission errors. Listed equipment may need to be checked separately. The offer is generally without a new TÜV inspection – we are happy to provide a quote from our partner workshop. Subject to errors and prior sale. = Additional information = Unladen weight: 1,700 kg Payload: 3,300 kg Gross vehicle weight: 5,500 kg VAT/margin scheme: VAT deductible Csdpfx Aljxxkrredjgt

Koşul: yeni, azami yük ağırlığı: 26.500 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.450 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, WIESE 3-axle low-loader with ramps and wheel recesses – NEW Availability approx. 4 months from order ---Vehicle Data--- Manufacturer: WIESE Type: WSA 3-36 TL Year of manufacture: 2025 Axles: 3 Gross vehicle weight: 39,000 kg Fifth wheel load: 12,000 kg Axle group max load: 27,000 kg Unladen weight: approx. 9,500 kg Tyres: 235/70 R17.5 Brakes: WABCO EBS with RSS ---Dimensions--- Loading platform length: 13,450 mm Low-bed length: approx. 9,550 mm Gooseneck length: approx. 3,640 mm Overall width: 2,550 mm Loading height low-bed: approx. 920 mm Fifth wheel height: approx. 1,250 mm ---Equipment--- 3 x SAF axles (9 t) with air suspension 1st axle: Lift axle 3rd axle: Follower axle with steering (lockable) Electronic air suspension E-TASC WABCO EBS braking system with Roll Stability Support Tire pressure monitoring system for 12 tyres Complete LED lighting 4 x LED work lights Cjdpfx Aeyuq Igjldogt 15-pin socket + 2x 7-pin sockets ---Body--- Robust steel frame 28 mm hardwood floor / omega floor 13 pairs of lashing rings (8,000 kg) Additional lashing points (5,000 daN) 2 pairs of wheel recesses Excavator arm recess Aluminium plug-in side boards on the raised platform Front-mounted toolbox ---Ramps--- 2 x aluminium drive-on ramps Dimensions: approx. 2,800 x 600 mm Load capacity: 27,460 kg Spring lift assistance Sideways adjustable ---Other Features--- Warning plates for overwidth up to 3 m Contour marking as per ECE-R48 Technical documentation and TÜV report For further information, please do not hesitate to contact us.

Koşul: ikinci el, ilk tescil: 04/1993, boş ağırlık: 550 kg, azami yük ağırlığı: 1.450 kg, toplam ağırlık: 2.000 kg, renk: gri, vites türü: mekanik, süspansiyon: diğer, Low-bed trailer, first registration 06/04/1993, drive-on ramp, Rockinger coupling, payload 1,450 kg, gross vehicle weight 2,000 kg. FOR US, CONDITION AND THE OVERALL FEEL ARE DECISIVE, PRICE IS SECONDARY. For further inquiries, Mr. Faller will be happy to assist you at the provided phone number. // TRADE-IN, PART-EXCHANGE, OR COLLATERALIZATION OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information provided without guarantee. More offers can be found on our homepage. Cgsdpel Tikhefx Aldst The description and stated data do not constitute a guarantee and are not binding. Only the purchase contract concluded at the dealership is binding when purchasing the vehicle. Subject to error and prior sale!

Koşul: yeni, boş ağırlık: 6.600 kg, azami yük ağırlığı: 17.400 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, toplam uzunluk: 10.900 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5 (Doppelbereifung), renk: gümüş, vites türü: mekanik, şehir içi yakıt tüketimi: 1.090 l/100 km, Unladen weight: 6,600 kg, permissible total weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, weights: Immediate registration technically possible Total technically permissible weight: 24,000 kg / 30,000 kg Payload approx.: 17,400 kg / 23,400 kg Unladen weight approx.: 6,600 kg +/- build tolerance Cedpfx Ajx Nrp Njldegt Dimensions approx.: Total length: 10,900 mm Total width: 2,550 mm Neck length: 2,180 mm Low bed platform length incl. rear bevel: 6,500 mm Rear bevel length: 950 mm Chassis width: 2,520 mm Loading height in loaded low bed: 860 mm Drawbar height: 900 mm Drawbar length: 1,900 mm Features: - Extendable outriggers to 3,000 mm (not in rear bevel) incl. wooden planks - SAF drum brake axles - Parabolic suspension - Drawbar with certified 40 mm towing eye - Tyres 235/75 R17.5 - Storage box integrated in transition slope to gooseneck - 1 plastic toolbox with shelf, 620 x 360 x 440 mm (w/h/d) - Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, timber lined - Ramps with spring-assisted lifting - Frame hot-dip galvanized Subject to errors and modifications.

Koşul: yeni gibi (sergi parçası), boş ağırlık: 10.000 kg, azami yük ağırlığı: 30.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 4x2, yükleme alanı uzunluğu: 9.220 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 235/75 R17,5, Üretim yılı: 2025, Donanım: ABS, merkez döner tabla, tır çekici bağlantısı, HTD 40K-RM-BM_ Internal dimensions: approx. 9,220 mm x 2,540 mm Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm Permissible gross weight: 24,000 kg Payload: approx. 14,000 kg Tyres: 235/75R17.5 inches Loading height: approx. 900 mm Drawbar length: approx. 1,500 mm Coupling height: approx. 820–1,000 mm Ramp angle: approx. 10° Ramp length: approx. 3,150 mm Ramp width: approx. 750 mm Permissible gross weight (special version): 40,000 kg Payload (special version): approx. 30,000 kg Low-bed length: approx. 6,610 mm Overall dimensions (LxWxH): 11,200 Technical gross weight: approx. 44,000 kg Technical axle load: approx. 11,000 kg 6 pairs of lashing points, 3,000 kg per lashing point Lashing points in the outer frame of the low-bed 4 pairs of lashing points, 3,000 kg per lashing point Lashing/stake pockets 3 t in the outer frame of the high-bed 1 pair of lashing points, 3,000 kg per lashing point Lashing/stake pockets 3 t in the outer frame of the low-bed Suspension: Air suspension unit including lifting and lowering, acting on the rear axle group Brake system: Brake system according to EC directives with EBS 4S/3M in multi-voltage version (12–24V), spring-loaded parking brake including 2 external test connections for brake/modulator and air bellows pressure Electrics: Lighting in LED version with flashing function for side marker lights, multi-voltage (12–24V) Turntable: Heavy-duty welded construction with low-maintenance ball bearing turntable Towing device: Cranked towing bar with 50 mm towing eye, low-maintenance silent bushings, including height adjustment for towing bar Frame: Heavy-duty welded construction made of high-strength fine-grained steel Continuous cross members for maximum stability Wheel recesses at the front (length at top approx. 2,500 mm, depth approx. 410 mm) and rear (length at top approx. 1,470 mm, depth approx. 370 mm); without wheel recess covers Excavator trough (length 1,650 mm, width 750 mm, depth 190 mm) Wheel cutouts over the rear wheels with wheelbase 2,010 mm, front corners chamfered Rear climbing strips on the ramp slope for maximum safety during loading and unloading 4 pairs of stake pockets (90x50 mm) in the outer frame (high-bed) 1 pair of stake pockets (90x50 mm) in the outer frame (low-bed) Floor: 50 mm softwood floor (painted/impregnated) Ramps: Single-piece hot-dip galvanized drive-on ramps (3,150 mm x 750 mm) with 50 mm softwood covering (painted/impregnated), laterally adjustable Direct-acting standing spring lifters for easiest operation Finishing: Chassis frame hot-dip galvanized by immersion Support: 2 folding supports at the rear, left and right at the vehicle rear Equipment: Folding side underrun protection Front: semicircular plastic mudguards Rear: straight steel mudguards with anti-spray 2 wheel chocks with holder Contour marking in accordance with ECE Regulation R48 Wheel recess covers front: With 3 pairs of stake pockets, without covering (covers retractable under the longitudinal members) 975.00888 Hardwood covering for front wheel recess cover Codpfx Aoiciuteldsgt Wheel recess cover rear With 1 pair of stake pockets, without covering (cover retractable under the longitudinal members) 975.00897 Hardwood covering for rear wheel recess cover 3 pairs of 6 t lashing rings, bolted 3 m equipment package without slope, B=11,200 Folding extension arms with softwood boards 970.04199-36 LED warning package HTD cranked Aspöck warning plates (4 pieces), electrics and revolving beacon 1 pair of stow

Koşul: yeni, azami yük ağırlığı: 28.640 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.600 mm, yükleme alanı genişliği: 2.300 mm, yükleme alanı yüksekliği: 1.500 mm, yükleme alanı hacmi: 25 m³, Üretim yılı: 2026, Donanım: ABS, Brake system: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Disc brakes 22.5" * Paver brake with shortened rear mudguards and manual paver switch ----Axles: * 3 x 9 t BPW axles * Lift axle with starting aid ----Suspension: * Air suspension with automatic lowering during tipping operation (to increase stability, can be disabled for overhead paver) ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 1 x 15-pin trailer socket * 5-chamber rear lights with protective roof * 1 x additional LED work light * Flashing side marker lights ----General attachments: * Aluminium air tanks * Jost telescopic steel landing legs with plate foot (only can be uncoupled when unladen) * 4 m aluminium ladder stored on the right side above mudguards * Closed individual plastic mudguards Cedpfx Ajxxf Tweldegt * Folding underrun protection * Rear towing eye * Folding entry ladder front left side * Document box on the front wall ----Chassis: * Frame made of high-strength fine-grained steel with Meiller-specific torsion cross members ----Tipping body: * Semi-circular rear tipping steel body * Front wall with 600 mm front roof as tarpaulin carrier * Side walls with sturdy continuous inwardly inclined upper rail * Front and rear walls slanted ----Thickness of floor, sidewalls, front and rear wall: * Front wall: 4 mm BS 70 steel * Tailgate: 4 mm HBW 400 steel * Sidewalls: 4 mm HBW 450 steel * Tailored floor: 5 / 6 mm Hardox 450 steel ----Hydraulic cylinder: * Front hydraulic cylinder with medium working pressure ----Hydraulic tailgate: * Overlapping hydraulic as well as swinging tailgate. Operated via mechanical ball valve block ----Tarpaulin: * Electric sliding tarpaulin - RAL 9006 white aluminium - with switch on the chassis and remote control ----Loading volume: * Approx. 25 m³ ----Fifth wheel height: * Unladen approx. 1,247 mm * Laden approx. 1,217 mm ----Paintwork: * Chassis painted in RAL 7021 black grey * Tipping body in RAL 9006 white aluminium ----General information: * --Permissible gross weight of 39,000 kg technically possible-- * Subject to change and prior sale * New vehicle with manufacturer’s warranty * Sample images ----Delivery time: * Available immediately ex Egestorf

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 01/1989, Üretim yılı: 1989, Donanım: ABS, - EBS Cgedpfsxt Tblsx Aldst Daha fazla bilgi için lütfen bizimle iletişime geçin.

Koşul: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12/24 V Cgodpfx Asq Dyvyjldet * 15-pin socket ----General Attachments: * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood flooring * Fitting for retrofitting container locks in front of the front wall * Bolted front wall made from smooth steel sheet * Side walls made from profiled sheet steel, foldable with drop-side spring assistance * Steel rear wall, insertable between ramp brackets, can be stowed in front of the front wall when not in use * Rear stakes bolted * Beveled rear drive-on angle approx. 860 mm ----Load Securing: * Perforated outer frame bent approx. 45 degrees, 2 t lashing eyes every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing eye at each front and rear corner * Various holes in front and rear cross-member for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed up to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps * Drop-side color in RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra charge ----Information: * -- Reinforced and certified bodywork to EN 12642 XL including load securing certificate -- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flanged towing eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flanged towing eye ----Lighting / Electrics: * RDÜ (Tire Pressure Monitoring System) * LED taillights 12/24 V * 15-pin electric connector ----General Attachments: * Jost landing gear at front * External hot-dip galvanized folding support legs at rear * Plastic toolbox, front right outside on front wall * Side underrun protection * Plastic quarter mudguards ----Low-bed loading area: * 50 mm softwood floor * Preparation in front of bulkhead for later installation of container locks * Bolt-on smooth steel front wall * Side walls made of trapezoidal steel sheet, foldable, with drop side lifting device * Steel rear wall, insertable between ramp mounts; when not in use, stored inside in front of bulkhead * Bolt-on rear stanchions * Rear approach angle approx. 860 mm ----Load securing: Cgedpfx Aspk Dv Reldjt * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Provision for fitting 3 t lashing rings every 600 mm * In each corner at front and rear: 1 x 6.3 t lashing ring * Various drilled holes for 1.2 t lashing points in front and rear crossmembers ----Ramps: * One-piece mechanical grid ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (collapsible to 20 mm width) ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, tailgate, and ramps * Drop side color in RAL 9010 pure white * Painting of side walls in a RAL color of your choice available at extra cost ----Info: * --Reinforced and certified body according to EN 12642 XL, including load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Koşul: yeni, boş ağırlık: 200 kg, azami yük ağırlığı: 550 kg, toplam ağırlık: 750 kg, yükleme alanı uzunluğu: 2.700 mm, yükleme alanı genişliği: 1.300 mm, yükleme alanı yüksekliği: 1.070 mm, yükleme alanı hacmi: 3,9 m³, renk: diğer, inşaat yüksekliği: 1.650 mm, çalışma genişliği: 1.790 mm, Manufacturer: Brenderup Model: Brenderup 2270S UB750 Low Loader Steel Permissible Total Weight: 750 kg Payload: 550 kg Unladen Weight: 200 kg Box Dimensions: 2700 x 1300 x 270 mm with 80 cm high mesh side extension, heavy-duty version Tyres: 13 inch Loading Height: 540 mm 13-pin plug with jockey wheel Price includes vehicle title (registration certificate Part II and COC documents) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Unsinn, and Neptun. Upon request, we provide a free temporary registration plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical modifications, price changes, and errors excepted. No liability for errors and misprints. Leaf spring axle, independent suspension, with jockey wheel, marker lights, chassis fully hot-dip galvanized, unbraked, including warranty. Brenderup uses galvanized components to optimally protect the trailer against rust. Robust angle lever fasteners, V-shaped safety drawbar, 4 x internal lashing rings, 13-pin plug with reversing light, protected multifunction lights, 27 cm steel sideboard. Cgedpfx Alsd T Spaedjt

Koşul: yeni, azami yük ağırlığı: 550 kg, toplam ağırlık: 750 kg, yükleme alanı uzunluğu: 2.700 mm, yükleme alanı genişliği: 1.300 mm, yükleme alanı yüksekliği: 1.050 mm, yükleme alanı hacmi: 3,9 m³, renk: gri, inşaat yüksekliği: 1.600 mm, çalışma genişliği: 1.790 mm, Manufacturer: Brenderup Model: Brenderup 2270S UB750 Low Loader Steel Permissible Total Weight: 750 kg Payload: 550 kg Unladen Weight: 200 kg Body Dimensions: 2700 x 1300 x 270 mm with grey tarpaulin and 105 cm high bow, internal clearance height Tyres: 13 inch Loading Height: 540 mm 13-pin plug with jockey wheel Price incl. vehicle registration document (Part II registration certificate and COC papers) We have a large selection of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Unsinn, and Neptun. On request, we can provide a free transit license plate. We repair trailers of all manufacturers. Additional accessories available upon request. Technical changes, price modifications, and errors excepted. No liability for mistakes or printing errors. Single axle, independent suspension, high tarpaulin, with jockey wheel, outline marker lights, fully hot-dip galvanized chassis, unbraked, including warranty. Brenderup uses galvanized components that optimally protect the trailer against corrosion. Robust angled lever locks, V-shaped safety drawbar, 4x internal lashing rings, 13-pin plug with reversing light, protected multifunction light, 27 cm steel drop sides. Cgjdpfx Alod T Spxodet

Koşul: yeni, boş ağırlık: 410 kg, azami yük ağırlığı: 1.590 kg, toplam ağırlık: 2.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.010 mm, yükleme alanı genişliği: 1.530 mm, yükleme alanı yüksekliği: 1.200 mm, yükleme alanı hacmi: 5,4 m³, renk: diğer, inşaat yüksekliği: 1.740 mm, çalışma genişliği: 2.040 mm, Manufacturer: Brenderup Type: Brenderup 2300S, 2300STB2000 Low-loader Steel Gross Vehicle Weight Rating (GVWR): 2,000 kg, braked tandem Payload: 1,590 kg Unladen weight: 410 kg Internal dimensions: 3,010 x 1,530 x 400 mm With mesh extension, 800 mm height Tyres: 13-inch Loading height: 540 mm, with foldable front panel 13-pin plug Including overrun brake with automatic reverse function Cjdpsuy Hwnofx Aldjgt Price incl. vehicle registration document (vehicle title Part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Unsinn, and Neptun On request, we provide a free temporary registration plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical modifications, price changes, and errors excepted. No liability for errors and typographical mistakes. Automatic reverse function, rubber suspension axle, independent suspension, jockey wheel, marker lights, fully hot-dip galvanized chassis, braked, incl. warranty, Brenderup uses galvanized components to optimally protect the trailer against corrosion, robust clamp fasteners, V-shaped safety drawbar, 6 internal lashing rings, braked, 13-pin plug with reversing light, protected multifunction lights, 40 cm steel side panels, with 800 mm mesh extension.

Koşul: ikinci el, makine/araç numarası: 545, Bucket package in TOP condition: - Ditch cleaning bucket, 2200 mm wide with rotary motor - Digging bucket, 1600 mm with teeth - Digging bucket, 1200 mm with cutting edge Csdpfx Alsi Ilt Njdsgt Including WINKELBAUER hydraulic quick coupler MultiConnect Suitable, among others, for Kobelco SK300 / SK350

Koşul: yeni, azami yük ağırlığı: 30.010 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.000 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New vehicle: Fliegl 4-axle low loader trailer with wheel recesses and split ramps, type VTS 400 RM Lease-purchase offer: 48-month term, down payment only VAT, final residual value 40% Monthly rate: EUR 899.00 Vehicle / Body: Low loader First registration: New vehicle Gross weight: 24,000 kg / 40,000 kg Unladen weight: 9,990 kg Payload: 14,010 kg / 30,010 kg Overall length: 12,000 mm Load length: total approx. 10,000 mm, gooseneck approx. 2,850 mm, loading deck including rear bevel approx. 7,150 mm Width: 2,550 mm Loading height: 900 mm Further information: Chassis: Low loader trailer Steel welded construction Turntable with heavy-duty ball race Rear support foldable Wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on 1st & 2nd axle with anti-spray flaps behind each axle, anti-spray flaps behind the 4th axle Excavator arm recess above the rear axles, extending to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes, each rated 5 t, in the excavator arm recess at approx. 300 mm from the front and approx. 200 mm before the rear bevel Spare wheel holder for 1 spare wheel, mounted vertically on the front center of the gooseneck. Spare wheel manufacturer as base tires, steel rim Cjdpfx Aotrizksldogt Storage box sunken into the floor of the gooseneck with cover, W=720 mm / L=520 mm / D=170 mm 1st pair of wheel recesses behind gooseneck, fitted in low-bed lane area, ramped entrance, bottom length approx. 1,600 mm, approx. 400 mm deep. Note: Main frame is 400 mm higher than wheel recess in this area. 2nd pair of wheel recesses between axles, fitted in low-bed lane area, ramped entrance, bottom length approx. 600 mm, approx. 300 mm deep. Note: Main frame is 300 mm higher than wheel recess in this area. Extendable width up to 3,000 mm (extension not available at the rear bevel or inside wheel recesses). (Track width of machines/vehicles to be transported must not exceed external frame width of 2,550 mm) Storage compartment for timbers under the low bed deck 70 mm timbers for extension to 3,000 mm Lashing points low loader: 1 pair of recessed ring lashing points at front of gooseneck, each 5 t 4 pairs of lashing holes in external frame, each 5 t (for hook-in ratchet straps) 8 pairs of welded-on lashing mushrooms, top and sides of the external frame, each 10 t 2x at front on gooseneck 6x in the low bed First lashing point 250 mm from the front, last max. 250 mm from rear; distance between lashing points not greater than 1,100 mm 5 pairs of stanchion pockets recessed in the external frame, internal 70 x 40 mm (can be converted to 5 t ring lashing points, not included) 1 pair of additional folding lashing points recessed in the floor, each 10 t 1x inside next to main frame at start of low bed 2 pairs of additional folding lashing points, each 10 t 1x on gooseneck (protrudes) 1x recessed in floor behind rearmost axle Drawbar coupling for turntable trailer: Drawbar with tested 50 mm coupling eye, coupling eye angled at 8° D-value min. 160 kN Axles + Suspension: BPW drum brake axles Laser-aligned axles/chassis; reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation at front (rocker compensation) Wheels and tires: 235/75 R 17.5" Manufacturer’s choice, with M+S marking Steel rims in twin-wheel configuration, factory silver Braking system: 2-line compressed air brake system Spring-loa

Koşul: yeni, azami yük ağırlığı: 31.920 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New Fliegl 4-axle low loader trailer with ramps, model VTS 400 Gross vehicle weight: 24,000 kg / 40,000 kg Unladen weight: 8,080 kg Payload: 15,920 kg / 31,920 kg Overall length: 11,940 mm Loading length: total approx. 10,410 mm, gooseneck approx. 2,490 mm, loading platform incl. rear bevel approx. 7,920 mm Width: 2,550 mm Loading height: 900 mm Further information Plus delivery / provision from stock location 26639 Wiesmoor: €1,280.00 net Chassis – Low Loader Trailer Steel welded construction Turntable with heavy-duty ball-race ring Folding rear supports 2 wheel chocks with holder Aluminium side underrun protection Full-width rear mud flap Half shell mudguards on 1st and 2nd axles with anti-spray flaps behind each axle Anti-spray flaps in front of and behind 3rd and 4th axles Excavator arm recess over the rear axles extending to the rear, approx. 1,800 mm long, 650 mm wide, 150 mm deep 2 pairs of lashing points, each rated at 5 t, in the excavator arm recess on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox, w = 600 mm / h = 425 mm / d = 460 mm, lockable Storage box recessed in the gooseneck floor with lid, W = 720 mm / L = 520 mm / D = 170 mm Extendable width to 3,000 mm (not in rear bevel area) (Track width of transported construction machines or vehicles must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks beneath the low loader deck Cjdpexrx Nlefx Aldjgt 70 mm wooden planks for widening to 3,000 mm Lashing points for low loader 1 pair of lashing cut-outs recessed in the longitudinal beam at the front on the gooseneck, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for ratchet strap attachment) 9 pairs of lashing mushrooms recessed on top and side of the outer frame, each rated at 10 t - 2 at the front on the gooseneck - 7 in the low-bed section First lashing point 250 mm from the front and last max. 250 mm from the rear, distance between lashing points not more than 1,100 mm 3 pairs of additional folding lashing eyes, each rated at 10 t - 1 on the gooseneck (protruding) - 1 at the beginning of the low-bed section recessed in the inner longitudinal beams - 1 behind the last axle recessed in the floor Towing gear for turntable trailer Drawbar with certified 50 mm towing eye Drawbar height adjustment via spring Axles & suspension Drum brake axles, manufacturer’s choice "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension with lift & lower valve + auto-reset function Wheels and tyres 235 / 75 R 17.5” – manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake Axle load detection via EBS-CAN bus signal for cockpit display (truck must be appropriately equipped, not truck-installed, not a calibrated scale) Vehicle stability control system 2 non-interchangeable coupling heads at the front with connecting lines to the towing vehicle 12-24 volt EBS (Electronic Braking System), plug at the front, with connecting cable (Knorr brand) Note: The trailer may only be towed by vehicles which ensure full ABS functionality! Electrics 12-24 volt, multi-chamber LED lights, side LED marker lights, LED number plate light (Note: On certain towing vehicles, incorrect diagnostics may occur, despite functional lighting) 2 white LED position lights at the front 2 white/red LED lane departure lights at the rear 2 x 7-pin non-interchangeab

Koşul: yeni, boş ağırlık: 15.420 kg, azami yük ağırlığı: 61.080 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear bevel approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Load area: Extendable load area with rear bevel approx. 500 mm x 8° 8 pairs of outward folding lashing rings 1 pair of flat-fitted lashing rings at the front of the load area Recesses in the outer frame of the loading area for attaching tie-down straps Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Two-piece steel ramps: One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramp sections hydraulically lift and fold, hydraulically height-adjustable, and hydraulically shiftable. Maximum load per pair: 50,000 kg. Landing legs: • JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tires: BPW axles and suspension, 4th and 5th axles steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lockout, activated via reverse gear and manually Tires 235/75 R 17.5 3PMSF Braking system: Braking system according to EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connector rail with sockets 24N, 24S & 15 pin Connection compliant with ISO: 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Paintwork: Cgjdpfx Alol Sl Izedst First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer High-quality 2-component (2K) topcoat, single color MB 7350 Novagrau Rear part metalized and painted in RAL 9010 (pure white) No metallic paint possible Steel construction: Steel construction made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Accessories: One spare wheel with holder in front of bulkhead 2" kingpin One galvanized steel front wall, approx. 400 mm high Yellow-red air couplings mounted on the galvanized connector rail at the front 2 wheel chocks with holder on the front wall Bracket at rear of gooseneck for ALU drive-on ramps One holder for a rotating beacon at the rear of the trailer Galvanized supports beneath the rear bevel of the loading area White reflector tape according to EU regulations on the sides, extension, and rear in red Electro-hydraulic unit at rear under the loading area Mounts for warning signs with socket at the gooseneck and rear plate left and right Ramp control valves fitted to right-hand side of the trailer One mud flap at the rear of the trailer Manual and documentation on USB stick 3.5" kingpin supplied loose Plug-in ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm (LxH) Rear galvanized drop-in stakes are removable (structure length approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or 40' container 6 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle with control via TEBS E, depending on the current axle load and current loading condition Square cleats 20 x 20 mm every 200 mm on the outer frame of the loading area's bevel On the checker plates, above the kingpin and the loa...