Kullanılmış Müller-Mitteltal T3 Profi 30,0 Neu, Baggerstiel, Voll Hydr. Rampe satın al (11.039)

Durum: yeni, azami yük ağırlığı: 14.620 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * RA-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * Tire pressure monitoring system (RDÜ) * Emergency release device for spring-loaded cylinders * Disc brakes * 2 x 10 t BPW wide-track axles * Air suspension (automatic lowering when brake is uncoupled) * Drawbar approx. 2,300 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle * Plastic tool box 450 x 470 mm, mounted on the right side * Side-mounted storage box 1,000 x 500 x 500 mm * Closed plastic mudguards, front and rear Ncodpjv Nulzsfx Ab Aeu * Closed lateral underride protection, usable as advertising surface * Rear underrun protection * Rear plastic bumper pads * Rear hazardous goods placard * 15-pin electrical connector * LED rear lights * Rollway length approx. 6,830 mm * Pneumatic 4-point container lock * Mechanically adjustable stop brackets (2 positions) front left and right on the tracks * 265/70 R 19.5 twin tires * Unladen weight 3,220 kg * --Permissible total weight up to 20,000 kg technically possible-- * Approx. 1,130 mm ride height when loaded * Suitable for container lengths from 5,500 to 7,000 mm * Hot-dip galvanized chassis * Air tanks, axles, slewing ring, and drawbar * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Available from approx. week 29 / 2026

Durum: yeni, azami yük ağırlığı: 14.650 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2024, * RS-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release mechanism for spring brake cylinders * Disc brakes * Duomatic brake coupling * 2 x 10 t SAF axles * Air suspension with automatic lowering when uncoupling the brakes * Drawbar, 2,300 mm long with 40 mm towing eye and height adjustment via tension spring & spindle * Right-side plastic toolbox, enclosed plastic fenders * Side closed underride protection, usable as advertising space * Rear underride protection with 2 impact buffers * Foldable "A" sign at the rear for waste disposal * LED rear lights with protective cover * 2 x 7-pin power sockets * Chassis hot-dip galvanized (excluding air tank, axles, drawbar, etc.) * Roller conveyor length approx. 6,950 mm * Rolling container secured by pneumatic 4-point claw locking system * At the front, 2 plug-in container stops with 2 additional plug-in positions * Unladen ride height approx. 1,165 mm * --Technically permissible gross weight of 20,000 kg-- * Suitable for 5,000 – 7,000 mm container lengths Ncsdpfx Abjl Tqkws Asu * New vehicle with manufacturer's warranty * Errors and intermediate sale excepted * Immediately available ex works Egestorf

Durum: yeni, azami yük ağırlığı: 14.650 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2024, * RS-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinder * Disc brakes * Duomatic brake coupling * 2 x 10 t SAF axles * Air suspension with automatic lowering when the brake is uncoupled * Drawbar 2,300 mm long with 40 mm towing eye and height adjustment via draw spring & spindle * Plastic toolbox on the right side, closed plastic fenders * Side closed underride guard usable as an advertising surface * Rear underrun protection with 2 crash buffers * Folding "A"-board at the rear for waste disposal Ncodpfx Aol Tpy Hsb Asu * LED rear lights with protective canopy * 2 x 7-pin electrical plugs * Chassis hot-dip galvanized (except air tank, axles, drawbar, etc.) * Roller track length approx. 6,950 mm * Rolling container secured with pneumatic 4-point claw locking system * At the front are 2 plug-in container stops with 2 additional plug-in positions * Ride height unladen approx. 1,165 mm * --Technically permissible gross weight of 20,000 kg-- * Suitable for container lengths of 5,000 – 7,000 mm * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual rear lowering Ncsdpfx Aetplv Tob Aeu ----Axle: * 3 x 11 t Gigant axles * Center axle can be lifted ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Tool box made of powder-coated steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray suppression * Plastic rear bumper pads * Mechanical rear safety support legs ----Container / Low-loader Platform: * Hot-dip galvanized main frame with raised outer rails (approx. 25 mm higher) for guiding roll-off containers * Steel floor with roller depressions in the turntable area * For roll-off container transport, container lengths from 5,500 - 7,000 mm possible * Pneumatic 4-point locking system and mechanical plug-in end stops at the front of the running rails * Load securing certificate as per DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 removable skip container stops for lateral centering, front 4 stops with swingable end stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on each side for attaching tie-down elements for positive and non-positive securing of skip containers * 4 cloverleaf-style lashing bars (each side) and 1 pair of 13.4 t UVV lashing rings to the front * Load securing certificates per DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Welded bead as anti-slip surface in the ramp track area * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Tires: * Tires: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides & rear * Axles, turntable, drawbar and air tanks painted in a shade of black * Hot-dip galvanized main frame ----Info: * Gross vehicle weight of 27,000 kg technically possible * New vehicle without initial registration, with manufacturer warranty * Errors and prior sale reserved ----Delivery Time: * Available from approx. week 47/2026

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle self-steering, with electro-pneumatic steering lock ----Suspension: * Air suspension with lift/lowering system and return-to-ride (RtR) valve ----Electrical / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted to trailer as an infotool, with pressure sensors for total axle load indication * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing legs at the front, mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder on the right side under the chassis ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and a front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable, on the side of the platform * Rear board – 150 mm high, slotted in place * Rear bevel on the fifth wheel platform to lowbed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks; lowbed area with 60 mm wooden planks * Tread plate over the axles ----Widenings: * 8 x mechanical swing-out extensions to achieve a total width of 3 m (not on the rear bevel). Widening boards available, stored on the fifth wheel platform * Mechanically adjustable warning sign assemblies front and rear Nedpfx Ael Tnvgob Ajcu ----Load Securing (lashing package): * On the fifth wheel platform: 2 x 6.3 t lashing rings per side; 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform sides: 2 x 13.4 t lashing rings per side; 4 x 10 t lashing rings, swiveling and retractable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side; 1 lashing ring at the rear in the excavator stick support * 2 x container locks immediately after the goose-neck in the lowbed area ----Excavator Stick Support: * Continuous excavator stick support from end of last rigid axle over steering axle to rear crossmember, internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable side-to-side) * 4-way valve block for future customer upgrade of hydraulic ramp shifting * The outer plank of the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and in the approach bevel ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 l up to 120 l/min) ----Payload Dimensions: * Fifth wheel loading area: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Unloaded loading height: approx. 910 mm (including 860 mm approach bevel) ----Coupling Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, landing legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show equipment not included with the offered vehicle ----Delivery Time: * Available from CW 38/2026

Durum: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle with lift function ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & adjustable height device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic impact protection buffers * Mechanical drop-down supports at the rear ----Container / Low Loader Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with wheel recesses in the bogie area * Suitable for roll-off containers with a container length of 5,500 - 7,000 mm * Pneumatic 4-point clamp-locking system plus mechanical plug-in front stops in the running rails * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip container stops for lateral centering, front 4 stops lockable with pivoting backstop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tension elements to secure skip containers positively and non-positively Ncodpfspk D Iisx Ab Aju * 4 lashing rails per side (cloverleaf design) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Weld beads as anti-slip surface in the track area of the ramp slope * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tires: 235/75 R17.5 ----Loaded Platform Height: * Platform height loaded: approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Paintwork: * Contour tape, reflective, on sides and rear * Axles, turntable, drawbar, and air tanks painted in black * Hot-dip galvanized main frame ----Info: * Technical permissible total weight: 27,000 kg * New vehicle without first registration with manufacturer warranty * Subject to alterations and prior sale ----Delivery time: * Available from approx. week 47/2026

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 3 Profil 30.0: Product Description (English, for professional trade platforms) ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with electro-pneumatic steering lock (trailing axle) ----Suspension: * Air suspension with lifting/lowering function and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as information tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support jacks at the front plus mechanical swivel supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder, side right under the chassis ----Low Loader Platform: * Saddle platform with 45° chamfered front corners and integrated toolbox at the front made of galvanized sheet steel, B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white), foldable and removable, fitted on the sides of the saddle platform * 150 mm high removable rear drop-in board * Tapered rear section on the saddle platform towards the low-bed area, approx. 700 mm long * Saddle platform with 50 mm hardwood planking and low-bed platform with 60 mm hardwood planking * Tread plate above the axles ----Widenings: * 8x mechanical folding extensions to 3 meters total width, except for the tapered rear section (extension planks available and stowed on the saddle platform) * Mechanical adjustable warning sign packages at front and rear ----Load Securing (Lashing Package): * On the saddle platform, 2x 6.3 t lashing rings per side, and 3x 5 t lashing stakes per side in the outer frame * On the low-bed platform, 2x 13.4 t lashing rings per side and 4x 10 t swiveling, retractable lashing rings set into the outer frame * On the sides, 2x 6.4 t lashing points per side, plus 1 lashing ring at the rear in the excavator arm rest * 2x container locks directly after the goose-neck in the low-bed platform ----Excavator Arm Rest: * Continuous excavator arm trough from end of the last rigid axle across the steering axle up to the end plate, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way valve block for later customer-side retrofit of hydraulic ramp shifting * The outer board of the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-on slope ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump flow rates over 40 l/min up to 120 l/min) ----Loading Dimensions: * Saddle platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm drive-on slope) ----Fifth-wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, support jacks, and air tanks painted in black * Vehicle is fully hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty Ncodopk D I Aopfx Ab Aeu * Errors and prior sale excepted * Sample images

Durum: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm – drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights 12 / 24 V * Removable LED beacon (rear) ----General Attachments: * Support winch at the front * External hot-dip galvanized folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead exterior * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * Preparation in front of the bulkhead for retrofitting container locks * Bolt-on smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel, folding with tailgate spring lifter * Steel rear wall slidable between the ramps (holder for stowage when not in use located inside at the front bulkhead) * Detachable rear stanchions * Rear approach slope approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm-wide rubber cover strip on the inner side of the ramps * On the approach slope and externally on the low-loader platform (from bulkhead to end cross member), each with a 12 mm thick and 210 mm wide rubber cover strip ----Load Securing: * Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Installation of 3 t pull-down lashing rings possible every 600 mm * 1 x 6.3 t lashing ring each at the front and rear corners * Various 1.2 t lashing points in the bulkhead and end cross member through multiple boreholes Nedpfx Aox Ipapsb Ascu ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 870 mm (can be compressed to 20 mm apart) ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, and loading ramps are hot-dip galvanized * Axles, springs, air tank, and flange towing eye painted black * Side walls painted RAL 9010 pure white ----Information: * --Reinforced and certified body to EN 12642 XL, including load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer’s warranty ----Delivery Time: Vehicle available immediately

Durum: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: Nedpfx Abex Ipbaj Aocu * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Drawbar Eye: * Drawbar height adjustable by 300 mm – drawbar extension by 250 mm to 2,250 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal (no truck-side installation required) * 15-pin electrical connector * LED tail lights 12 / 24 V * Detachable LED beacon at rear ----General Attachments: * Landing gear at front * Outward-facing galvanized folding supports at rear * Plastic toolbox approx. 858 x 500 x 500 mm at front right on front wall exterior * Side underrun protection * Plastic quarter mudguards ----Low-Loader Deck: * Provision in front of front wall for subsequent installation of container locks * Bolted front wall made of smooth sheet steel * Trapezoidal profiled steel side walls, foldable with drop-side spring assists * Sliding steel rear wall between ramps – storage bracket for disuse inside front wall * Bolt-on rear stanchions * Rear drive-on gradient approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber strip on inside of ramps * 12 mm thick and 210 mm wide rubber strips in the drive-on gradient and outer low-loader platform (from front wall to rear crossmember) ----Load Securing: * Perforated outer frame, angled approx. 45°, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * Single-piece mechanical grating ramps with spring assist for one-man operation, approx. 2,750 x 870 mm (can be collapsed to 20 mm clearance) ----Painting: * Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized * Axles, springs, air reservoir, and flange drawbar eye painted in a black tone * Side panels painted in RAL 9010 pure white ----Notes: * --Reinforced and certified superstructure according to EN 12642 XL including load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery Time: Vehicle is available immediately ex Eggebostel

Durum: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, ilk tescil: 10/2013, toplam genişlik: 2.750 mm, Üretim yılı: 2013, Müller Mitteltal ITS-VLL 30.0 Profi Alçak Yükleyici | 3 dingilli | Hidrolik alçaltılabilir yükleme platformu | 48 ton izin verilen toplam ağırlık | 275 cm genişliğinde Son derece sağlam ve dayanıklı Müller Mitteltal ITS-VLL 30.0 Profi alçak yükleyici, makine, inşaat makineleri ve ağır hizmet ekipmanlarının taşınması için idealdir. Sağlam yapısı ve güvenilirliği ile bilinir. Teknik Veriler: Marka: Müller Mitteltal Model: ITS-VLL 30.0 Profi Şasi Numarası (VIN): WMM00000D0057250 İzin verilen toplam ağırlık: 48.000 kg Dingil konfigürasyonu: 3 dingilli Dingil yükleri: 1. dingil: 10.000 kg 2. dingil: 10.000 kg 3. dingil: 10.000 kg İzin verilen king pin yükü: 18.000 kg Yükleme platformu: Düşük yükleme platformu (alçak şasi tipi) Yükleme rampaları: hidrolik tahrikli Alçak yükleme platformu: Hidrolik olarak ayarlanabilir (yukarı/aşağı) Lastikler: iyi durumda Konstrüksiyon: Tam çelik şasi Maksimum hız: 80 km/s Donanım & Opsiyonlar: Ağır hizmet tipi alçak şasi Hidrolik olarak ayarlanabilir alçak yükleme platformu (yukarı/aşağı) Hidrolik arka yükleme rampaları Geniş (275 cm) ve sağlam yükleme alanı Ekskavatörler, silindirler, vinçler vb. için uygun Dayanıklı yapı, hemen kullanıma hazır Durum: Treyler kullanılmıştır, ancak çalışır durumdadır ve yaş ve kullanım kaynaklı izler taşıyabilir. Teknik olarak sağlam ve güvenilir bir makine taşıyıcısıdır. Hemen kullanıma hazır – taşıma şirketleri ve inşaat firmaları için ideal. Daha fazla bilgi veya yerinde inceleme için lütfen bizimle iletişime geçin. = Ek Bilgiler = Dingil konfigürasyonu Arka dingil 1: Çift tekerlekli; Maks. dingil yükü: 10.000 kg; Yönlendirmeli Arka dingil 2: Çift tekerlekli; Maks. dingil yükü: 10.000 kg; Yönlendirmeli Arka dingil 3: Çift tekerlekli; Maks. dingil yükü: 10.000 kg; Yönlendirmeli Ağırlıklar Boş ağırlık: 14.500 kg Taşıma kapasitesi: 33.500 kg Azami toplam ağırlık: 48.000 kg Bakım, Geçmiş ve Durum APK (Araç Muayenesi): 02.2027’ye kadar geçerli Teknik durum: çok iyi Nsdpfxszc E Nno Ab Aecu Görsel durum: çok iyi Finansal Bilgiler Fiyat: Talep üzerine Diğer Bilgiler Daha fazla bilgi için Henk Gerrits, Klaas Gerrits veya Dhr. Gerrits ile iletişime geçebilirsiniz.

Durum: yeni, azami yük ağırlığı: 16.400 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) Ncjdpfxjq Dyvcj Ab Aju * TPMS (tire pressure monitoring system) * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lifting and lowering function * SmartBoard as an information tool on the trailer, with pressure sensors for axle group load indication * Side underrun protection * Mechanically adjustable warning sign boards at the front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, both with splash protection * Foldable (hot-dip galvanized) cover for the toolbox in the turntable platform * Toolbox made from galvanized sheet steel, approx. 650 x 300 x 600 mm (black powder-coated), mounted on right side * 15-pin electrical connector * LED lighting, 12 / 24 V * Removable LED beacon at rear * Side marker lights with indicator control * Towing bar with 40 mm towing eye, height adjustable via tension spring and turnbuckle * Tire pressure monitoring system with in-cab display via EBS signal (no installation required on the truck) * Rubber lining on the folding ramps and on the left and right drive-up slope (approx. 860 mm long) * Rubber lining on longitudinal members from bulkhead to end crossmember * Hardwood flooring on the running surfaces of the low-bed platform * 4 stake pockets per side, each with 2 t lashing capacity * Load securing package consisting of: 5 pairs of UVV load rings, swiveling and retractable, loadable in all directions and recessed into the outer frame - corners rated to 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the sloped rear section) * Timber support holders under loading platform in longitudinal direction * Raised roller stop in front of the bulkhead, with 1 x 6.4 t lashing ring on each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically deployable ramp tip and load-holding valves * Hydraulic lateral ramp adjustment * Rear hydraulic support (single-stage cylinder) * Hydraulic flow divider in the trailer (for hydraulic pump output on the truck from over 40 l to max. 140 l / min) * Hydraulic control block, splashwater protected * Dual-line hydraulic system * Platform above turntable: approx. 1,960 x 2,520 mm * Rear loading platform: approx. 6,500 x 2,520 mm (including 860 mm approach ramp) * Loaded platform height: approx. 890 mm +/- 20 mm (air suspension adjustment) * Chassis, turntable, roller stop, folding extensions, and access ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks, etc. painted black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 16.400 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lifting and lowering function * SmartBoard as an information tool on the trailer, with pressure sensors for axle group load indication * Side underrun protection * Mechanically adjustable warning sign boards at the front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, both with splash protection * Foldable (hot-dip galvanized) cover for the toolbox in the turntable platform * Toolbox made from galvanized sheet steel, approx. 650 x 300 x 600 mm (black powder-coated), mounted on right side * 15-pin electrical connector * LED lighting, 12 / 24 V * Removable LED beacon at rear * Side marker lights with indicator control * Towing bar with 40 mm towing eye, height adjustable via tension spring and turnbuckle Ncsdstplv Nepfx Ab Aeu * Tire pressure monitoring system with in-cab display via EBS signal (no installation required on the truck) * Rubber lining on the folding ramps and on the left and right drive-up slope (approx. 860 mm long) * Rubber lining on longitudinal members from bulkhead to end crossmember * Hardwood flooring on the running surfaces of the low-bed platform * 4 stake pockets per side, each with 2 t lashing capacity * Load securing package consisting of: 5 pairs of UVV load rings, swiveling and retractable, loadable in all directions and recessed into the outer frame - corners rated to 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the sloped rear section) * Timber support holders under loading platform in longitudinal direction * Raised roller stop in front of the bulkhead, with 1 x 6.4 t lashing ring on each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically deployable ramp tip and load-holding valves * Hydraulic lateral ramp adjustment * Rear hydraulic support (single-stage cylinder) * Hydraulic flow divider in the trailer (for hydraulic pump output on the truck from over 40 l to max. 140 l / min) * Hydraulic control block, splashwater protected * Dual-line hydraulic system * Platform above turntable: approx. 1,960 x 2,520 mm * Rear loading platform: approx. 6,500 x 2,520 mm (including 860 mm approach ramp) * Loaded platform height: approx. 890 mm +/- 20 mm (air suspension adjustment) * Chassis, turntable, roller stop, folding extensions, and access ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks, etc. painted black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Immediately available ex Egestorf

Durum: ikinci el, dingil konfigürasyonu: 3 aks, ilk tescil: 09/2018, toplam uzunluk: 11.830 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.720 mm, süspansiyon: hava, lastik boyutu: 235/75R17,5, renk: diğer, Üretim yılı: 2018, Donanım: ABS, hidrolik arka platform, = Additional options and equipment = - EBS (Electronic Braking System) - Hydraulic system - Tail lift = Notes = Number of axles: 4, Unladen weight: 9,900 kg, Gross weight: 40,000 kg, Chassis type: Full chassis, Chassis material: Steel, Suspension type: Full air suspension, ABS, EBS, Hydraulic system, Body year of manufacture: 2018, Body material: Steel, Ramps: Hydraulically controlled, Axle type: BPW, Tail lift, Tail lift version: Rear gate, Tail lift material: Steel, Wheel recess / Double hydraulic ramps / 40T technical / Galvanized / Widenable = Further information = General information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tyre size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; Steered; Tyre tread left inside: 10 mm; Tyre tread left outside: 10 mm; Tyre tread right inside: 11 mm; Tyre tread right outside: 10 mm Axle 2: Twin tyres; Tyre tread left inside: 8 mm; Tyre tread left outside: 7 mm; Tyre tread right inside: 7 mm; Tyre tread right outside: 7 mm Axle 3: Twin tyres; Tyre tread left inside: 7 mm; Tyre tread left outside: 7 mm; Tyre tread right inside: 10 mm; Tyre tread right outside: 10 mm Axle 4: Twin tyres; Tyre tread left inside: 7 mm; Tyre tread left outside: 6 mm; Tyre tread right inside: 4 mm; Tyre tread right outside: 6 mm Weights Unladen weight: 9,900 kg Ncsdpfx Asyqp Tmob Aeu Payload: 30,100 kg GVW: 40,000 kg Functional Tail lift: Rear gate Platform height: 89 cm Environment Emission class: Euro 0 Condition General condition: Average Technical condition: Average Visual condition: Average Damage: None Financial information Leasing rate: €698 per month (default, 60 months); Please ask for more information and terms = Company information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer covers all European brands, years of manufacture, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognisable quality • Good prices • Reliable trading • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Professional technical service • The security of “recognisable quality” • And more… Please visit our website for special deals and a complete stock list. Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and submit an inquiry via our website. Ask directly about our European warranty package.

Durum: ikinci el, boş ağırlık: 7.340 kg, azami yük ağırlığı: 22.660 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2012, yükleme alanı uzunluğu: 9.200 mm, süspansiyon: çelik, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Yükleme alanı uzunluğu yaklaşık 9.200 mm, yükseklik yaklaşık 900 mm, 16 adet bağlama halkası, araç sipariş üzerine satılmaktadır, baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler. Daha fazla bilgi için: !, More Details: ! Ncodpfozgvbzsx Ab Aou

Durum: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2010, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Vehicle is being sold on behalf of a customer. Some wooden planks are damaged. 17 pairs of lashing rings. Loading height approx. 900 mm. -- Typographical errors, mistakes and alterations reserved, sample images -- More data at: !, More Details: ! Ncodpfx Aezf Iagob Aou

Durum: ikinci el, boş ağırlık: 7.340 kg, azami yük ağırlığı: 22.660 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2012, yükleme alanı uzunluğu: 9.200 mm, süspansiyon: çelik, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Yükleme alanı uzunluğu yaklaşık 9.200 mm, yükseklik yaklaşık 900 mm, 16 adet bağlama halkası, araç sipariş üzerine satılmaktadır, baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler. Daha fazla bilgi için: !, More Details: ! Ncedpjzfv I Sjfx Ab Aou

Durum: yeni, süspansiyon: diğer, renk: diğer, vites türü: diğer, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Compartment for aluminium ramps, price per compartment, length approx. 2.48 m, width approx. 1 m, height approx. 27 cm. -- Subject to misprints, errors, and changes. Sample images -- For more details, see: ! Njdpjzfv H Iofx Ab Aecu

Durum: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2010, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Vehicle is being sold on behalf of a customer. Some wooden planks are damaged. 17 pairs of lashing rings. Loading height approx. 900 mm. -- Typographical errors, mistakes and alterations reserved, sample images -- More data at: !, More Details: ! Nedpfx Aezfgw Rsb Ascu

Durum: ikinci el, boş ağırlık: 3.680 kg, azami yük ağırlığı: 10.720 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2021, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, süspansiyon: çelik, lastik boyutu: 385/55R19,5 156J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 385/55R19,5 156J, arka lastik boyutu: 385/55R19,5 156J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, YENİ GİBİ, geniş lastik, GALVANİZLİ damper kasası, 12 adet sabitleme halkası, 600 mm yan paneller, rampalar için ek ücret 1.000 €, -- Baskı hataları, yanlışlıklar ve değişiklik hakkı saklıdır, örnek görseller --, Daha fazla veri için: !, Detaylı bilgi: ! Njdpfozd Dtaex Ab Ajcu

Durum: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting on the first axle, activated via EBS (no truck-side installation required) * Rearmost axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function, including ride height control valve ----Electrics / Lighting: * Smart-Board mounted as infotool on trailer with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12/24 V * Removable LED rotating beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel wheel arches * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swivel arm as carrier for connection cables from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with front edges chamfered at 45°, front toolbox made of galvanised, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminium drop sides on the platform (in RAL colour of choice), fold-down and removable * Rear board plugged in, 150 mm high * Rear chamfer at the platform leading to the lowbed, approx. 700 mm long with checker plate covering and a perforated strip at the end for hooking in aluminium approach ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over axles * 9 mechanical folding widenings to 3 m total width (excluding rear chamfer), widening planks included, with lockable transverse storage compartment under the loading area * 3 storage compartments under the platform for optional aluminium approach ramps or wooden planks for wheel well covering ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum spacing 480 mm) Ncsdoq Euakopfx Ab Asu * Each side equipped with 3 sunken 13.4 t lashing rings in the floor (1 on the platform, 1 on the longitudinal beams after the gooseneck, 1 above the middle axle next to the longitudinal beam) Low Loader Platform: * Each side equipped with 3 x 13.4 t lashing rings on the outer frame (1 at start of gooseneck, 1 at start of drive-on chamfer, 1 at end of drive-on chamfer) * Each side with 2 x 10 t lashing rings (1 between front wheel well and 1st axle, 1 between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frames of the wheel wells (2 at the front and 1 at the rear wheel well) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle across the steering axle to rear crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * Each side with 2 x 6.4 t lashing rings

Durum: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, ETÜ-TA-R 19.0 ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar / Flange Drawbar Eye: * Drawbar with 50 mm flange drawbar eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Tool box made of galvanized sheet steel, approx. 650 x 350 x 320 mm, mounted right side, black powder-coated * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * Reinforcement package for drilling rig transport on the chassis – loading height + 20 mm * 50 mm softwood floor in clamped design * Preparation in front of front wall for retrofitting container locks * Front wall bolted, made from smooth sheet metal * Side walls made of profiled steel sheet – drop-down, with spring assistors * Rear wall, steel, slides between ramps – storage bracket in front of the front wall when not in use * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm * In each corner at the front and rear: 1 x 10 t lashing ring; various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be pushed together to 20 mm) * Rear approach slope approx. 860 mm Ncsdpfjpk D D Hex Ab Aou ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, rear folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in a shade of black * Sideboard paintwork in RAL 9010 pure white * Side wall paintwork in a RAL color of your choice available at extra charge ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately ex Egestorf

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS braking system Nodpoq Ra D Eefx Ab Ajcu * Emergency release device for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) * 40 mm flange towing eye ----General Attachments: * Jost support windlass at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox mounted front right on the front wall exterior ----Electrics / Lighting: * Tire pressure monitoring system (RDÜ) * LED lighting ----Loading Platform: * Platform length 6.27 m * Suitable for container transport * 50 mm softwood floor * Preparation in front of front wall for retrofitting container locks * Bolted front wall in smooth sheet steel * Drop-down, trapezoidal-profile steel side walls with sideboard spring assist * Steel rear wall, can be stowed between ramp holders when not in use, secured inside in front of the front wall * Rear staking pockets bolted ----Load Securing: * Perforated external frame, angled at approx. 45 degrees, with lashing capacity of 2 t every 480 mm * Optional installation of 3 t recessed lashing rings every 600 mm possible * In each corner (front and rear), 1 x 6.3 t lashing ring * Various holes in the front and rear carriers for 1.2 t lashing options ----Ramps: * One-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear drive-up angle approx. 860 mm ----Tires: * Tires: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear accent and loading ramps * Board sides painted in RAL 9010 pure white * Optional painting of the side walls in another RAL color available at extra cost ----Information: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery Time: * Available from week

Durum: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 21.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with raising and lowering system Njdpfx Abol Tihxj Ascu ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Lighting / Electrics: * 15-pin electrical connector * LED lights 12/24 V * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Preparation before the front wall and rear slope for retrofitting container locks for transporting 20" containers * Designed for 21 t GVW with reinforced frame and axles * Reinforcement package on the chassis for transporting drilling equipment * 50 mm softwood floor in clamped design * Front wall provided with preparation for retrofitting container locks * Bolted front wall made of smooth sheet steel * Split, fold-down side walls made of trapezoidal-profiled sheet steel with centrally mounted folding stanchion * Steel rear wall insertable between the ramps – storage bracket for unused panel inside at the front wall * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t retractable lashing rings every 600 mm * Profifix lashing rail centrally positioned along the longitudinal axis for securing options up to LC 3000 daN * 1 x 10 t lashing ring at each front and rear corner * Lashing package with 2 x 8 t flush-mounted lashing rings per side in the outer frame; various holes for 1.2 t lashing options in front and rear cross beams ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (retractable to 20 mm) * Rear run-up angle approx. 860 mm from chassis ----Loading Heights: * Unladen approx. 940 mm * Laden approx. 910 mm ----Wheelbase / Tires: * 1,810 mm * Tires: 235/75R17.5 ----Painting: * Painting of the side walls in a RAL color of your choice (no special or metallic paints); can be changed up to approx. 6 weeks before completion * Drawbar, front wall, tailgate, folding supports, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images shown ----Delivery Time: * Available from week 29 / 2026

Durum: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-ER 19.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering facility ----Drawbar / Flange Drawbar Eye: * Drawbar with 50 mm flange drawbar eye and 110 mm height adjustment via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights 12 / 24 Volt ----General Attachments: * Jost landing leg at front * External folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped design * Fittings in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet Njdpfx Aemi Tmaeb Aocu * Split steel side walls, trapezoidal-profiled, foldable with folding stake in the center * Steel rear wall, slide-in between ramps (storage bracket for non-use inside in front of bulkhead) * Rear stakes bolted ----Load securing: * Perforated outer frame approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashings every 600 mm * Load securing package: in front and rear corners, each 1 x 10 t UVV-rated lashing point, each side 2 x 8 t UVV-rated lashing rings, retractable in outer frame; various holes for 1.2 t lashing option in front and rear cross members ----Ramps: * One-piece slide-in ramps, 12 t / pair, approx. 2,750 x 620 mm * Rear driving slope approx. 860 mm ----Loading height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, bulkhead, rear gate, folding supports, and loading ramps hot-dip galvanized * ---Axles, air tanks, flange drawbar eye, and landing leg painted in black shade--- * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted / subject to change ----Delivery time: * Immediately available from Egestorf

Durum: yeni, azami yük ağırlığı: 10.970 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, KA-TA-R 14,4 - Kamyon Tandem Üç Yana Devirmeli Dorse - Seride taşıma kapasitesi yakl.: 11.050 kg - 285/70R19.5 lastik ile toplam ağırlık 14,4 tona yükseltilebilir - İç ölçüler: 5.000 x 2.420 x 500 mm Ncsdpfjxmwiyjx Ab Aju - Yüklü zemin yüksekliği 1.040 mm - 1 adet sıcak daldırma galvanizli şasili ve alt korumalı gövde - Boya: Akslar, yaylar ve hava tankı vb. siyah renkte - Çelik zeminde gömülü ve katlanabilir 3 çift yük sabitleme halkası, LC 3.000 daN - ABS 2 S/2 M, 24 Volt - 500 mm yüksekliğinde çelik yan kapaklar için 2 yay kaldırıcı - Sol ve sağda, bölünmemiş yan duvarlarda salınımlı 1 merkezi kilit Opsiyonel donanımlar: Çelik zemine gömülü 1 çift UVV sabitleme halkası, zeminin üstünde değil 4 mm kalınlığında Hardox 450 çelik taban Standart yerine kranklı dişli ile çekme kolu yükseklik ayarı 1 çift kenarsız alüminyum yükleme rampası (8,0 t/çift), 3.500 x 400 x 105 mm, lastikli ve paletli araçlar için uygun Alet kutusu