Kullanılmış Fliegl 3-Achs Sattelkipper Alu 40 M³ satın al (60.237)

Durum: yeni, azami yük ağırlığı: 17.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.670 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, New vehicle: Fliegl 3-axle low-loader trailer with ramps, model DTS 300 Vehicle completely hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 / 23,900 kg Overall length: 10,890 mm Loading length: 8,670 mm total, 6,500 mm recessed deck incl. rear bevel / 2,170 mm step deck Width: 2,520 mm Loading height: 860 mm Further information Plus pre-carriage / handling ex stock 26639 Wiesmoor: €1,280.00 net Hire-purchase offer: Term 48 months, down payment VAT only, residual value 40% Monthly rate: €569.00 Steel welded construction Turntable with heavy-duty ball bearing ring Foldable rear support Chocks with bracket Aluminum side underrun protection Full-width rear spray flaps (not in combination with forklift holder) Half-shell mudguards on the 1st axle with anti-spray flaps Anti-spray flaps behind the 2nd and 3rd axles 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable width up to 3,000 mm (not in the rear bevel) (The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for timber planks in the center of the loading area 70 mm timber planks for extension to 3,000 mm Tiedown points low-loader 1 pair of tiedown recesses in the main frame at the front of the step deck, each 10 t 4 pairs of lashing holes in the outer frame of the step deck, each 5 t (for lashing strap hooks) 7 pairs of lashing pins recessed in and on the side of the outer frame, each 10 t 1 at the front on the step deck 6 in the low-bed recessed deck First lashing point 250 mm from the front and the last max. 250 mm from the rear, spacing of lashing points not greater than 1,100 mm 5 pairs of ring lashing eyes recessed in the outer frame, each 5 t (convertible to stake pockets) 2 pairs of additional foldable lashing eyes, each 10 t 1 on the step deck (protruding) 1 recessed in the floor behind the last axle Drawbar/trailer running gear Drawbar with tested 40 mm towing eye Drawbar height adjustment via spring Axles & suspension Drum brake axles, manufacturer’s choice Bedpfxsv D T R Eo Ac Iodd "Laser-measured axles/running gear" for reduced tire wear and fuel consumption Air suspension with raise & lower valve Wheels and tires 235 / 75 R 17.5" tires, manufacturer’s choice Twinned steel rims, factory silver Braking system Two-line air brake system Spring-loaded parking brake Vehicle stability system Axle load detection via EBS CAN bus signal, for display in driver's cab—truck must be suitably equipped, no installation on truck (not a calibrated scale) 2 foolproof coupling heads at front, with connecting lines to tractor unit 24 V EBS, electronic braking system with EBS connector at front, with connecting cable Note: The trailer may only be towed by vehicles that guarantee the effectiveness of ABS! Electrics 24 V, multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red track marker lights at rear 2 x 7-pin foolproof connectors at front, with connecting cable 1 LED beacon with bracket, controlled via position light (removable beacon) 2 pairs of warning panels, double LED illuminated, extendable to 3,000 mm Floor Front step deck with steel/chequer plate surface Storage compartment recessed in transition to step deck Then approx. 70 mm softwood floor, steel/chequer plate in the wheel arch area Rear bevel with 70 mm softwood floor Low-loader deck incl. rear bevel: 6,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide,

Durum: yeni, azami yük ağırlığı: 26.100 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Vehicle / Body: Low-bed semi-trailer First registration: New vehicle Gross weight: 35,000 kg / 47,000 kg Unladen weight: 8,900 kg Payload: 26,100 kg / 38,100 kg Overall length: 13,300 mm Loading length: 9,200 mm Width: 2,520 mm Loading height: 900 mm Further information: Chassis low-bed semi-trailer Steel welded construction, fifth wheel plate with replaceable 2" king pin and two king pin positions (not in combination with forced steering) 24 t 2-speed landing gear, single-side operation, straight base, without load equalizer Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Full-width mudflap at rear Mudflaps with antispray in front of the 1st axle and behind each axle, in accordance with EC regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable widening to 3,000 mm (not applicable to rear bevel) (The track width of the construction machinery or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks on neck, transverse at front 70 mm wooden planks for extension to 3,000 mm Excavator arm recess starting over rear axles up to the rear, approx. 3,000 mm long, approx. 650 mm wide, approx. 230 mm deep 2 pairs of lashing holes rated to 5 t each in the excavator arm recess, lateral on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear slope Lashing points low-bed trailer: 11 pairs of lashing mushrooms recessed on top and side of external frame, each rated to 10 t 2 x on gooseneck 9 x distributed on low-bed area 2 pairs of lashing eyes front on gooseneck, each rated to 5 t 3 pairs of swivel lashing eyes on the gooseneck, each 5 t 2 pairs of folding lashing eyes additionally recessed in low-bed area, each 10 t 1 x at the start of low-bed area 1 x at the end of the rear slope 1 pair prepped on gooseneck slope for 6.7 t bolt lashing eye (JDT) 8 pairs of ring lashing eyes recessed in the external frame, each 5 t (convertible to stanchion pockets) 1 pair of bolt lashing eyes each 6.7 t (JDT), with large flange plate incl. thread as counterholder Bedsut Idnopfx Ac Iodd Axles & Suspension: SAF or BPW drum brake axles, at manufacturer's discretion "Axle/chassis laser alignment" reduces tire wear and fuel consumption Last axle self-steering, with automatic reverse lock via reversing light and additional locking function on vehicle via push button Air suspension Wheels and tires: 235/75 R 17.5" At manufacturer's discretion Steel rims in twin arrangement, factory silver Brake system: 2-line air brake system Color-coded hose layout for easy servicing Spring-actuated parking brake 24 Volt EBS, Electronic Braking System with EBS socket at front, without connection cable Note: The trailer may only be towed by tractor units that ensure functioning ABS! 2 mistake-proof coupling heads at front, without connecting line With lift & lower valve Axle load detection via EBS-CAN bus signal, for display in cab, truck must be pre-equipped, not installed on truck (not a calibrated scale) Vehicle stability control system Tire pressure monitoring system to ECE R 141, display via tractor unit display, via EBS, not installed on truck (requirements must be met by the truck) Electrics: 24 Volt, multi-chamber lamps, lateral yellow LED lighting Side yellow LED lights linked to indicator "flashing side marker lights" 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin mistake-proof sockets at front, without conn

Durum: yeni, azami yük ağırlığı: 17.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.670 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, Gross vehicle weight: 24,000kg / 30,000kg Unladen weight: 6,100kg Payload: 17,900kg / 23,900kg Overall length: 10,890mm Loading length: total 8,670mm, gooseneck 2,170mm, loading deck 6,500mm Width: 2,520mm Loading height: 860mm Additional information plus pre-carriage / delivery ex-stock 26639 Wiesmoor €1,280.00 net Chassis Lowbed Trailer Steel welded construction Turntable with heavy-duty ball race Rear supports foldable 2 wheel chocks with holders Aluminium side impact protection Full-width rear spray flap (not in conjunction with forklift bracket) Quarter shell mudguards in front of 1st axle Anti-spray mud flaps behind 2nd and 3rd axle 1 lockable plastic toolbox, w=600mm / h=425mm / d=460mm Extendable outriggers for widening to 3,000mm (not in rear bevel) (Track width of the machines or vehicles to be transported must not exceed the external frame width of 2,550mm) Timber storage compartment centrally located on the loading area 70mm timber planks for extension to 3,000mm Lashing eyes low loader 1 pair of front lashing recesses in main beam at gooseneck, each 10t 4 pairs of lashing holes in the outer frame of the gooseneck, each 5t (for attaching ratchet straps) 7 pairs of lashing points (studs) inset at top and side of outer frame, each 10t 1x at front on gooseneck 6x in well deck First lashing eye 250mm from front, last max. 250mm from rear, distance between lashing eyes max. 1,100mm 5 pairs of recessed ring lashing eyes in outer frame, each 5t (convertible to stake pockets) Bjdewlmr Ropfx Ac Ijdd 2 pairs of additional folding lashing eyes, each 10t 1x on gooseneck (protruding) 1x recessed in floor behind last axle Towing gear Turntable trailer Drawbar with certified 40mm towing eye Drawbar height adjustment by spring Axles and suspension BPW drum braked axles "Chassis/axle alignment with laser" to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (walking beam equalizer) Wheels and tyres 235/75 R 17.5" Manufacturer's choice Steel rims twin configuration, factory silver Brake system 2-line air brake system Spring-loaded parking brake 2 fail-safe couplings at front, connection lines to tractor unit 24V ABS and ALB, ABS socket at front, with connection cable Note: This trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrics 24 volt, multi-chamber lamps, yellow LED side marker lights 2 white position lights at front 2 white/red lane marker lights at rear 2x 7-pin fail-safe plugs at front, with connecting cable 1 LED beacon with bracket, controlled via sidelights (beacon removable) 2 pairs of warning panels, each LED illuminated and extendable to 3,000mm Floor Gooseneck clad with steel/chequer plate Storage box inset in transition to gooseneck Subsequent area fitted with approx. 70mm softwood floor, in wheel arch areas with steel/chequer plate Rear incline with 70mm softwood flooring Lowbed area incl. rear incline 6,500mm Loading ramps Steel ramps 2,800mm long, 750mm wide, laterally adjustable Additional lower ramp locks folding (to prevent lateral slipping of ramps, not in conjunction with hydraulic side ramp shift) Planked with timber (ends with steel/chequer plates) With spring assist Operating instructions For a 10,000kg axle load, a special permit is required, only indivisible loads permitted! For application of a sp...

Durum: yeni, azami yük ağırlığı: 18.400 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 5.900 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, Gross vehicle weight: 24,000kg / 30,000kg Unladen weight: 5,600kg Payload: 18,400kg / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear taper Width: 2,520mm Loading height: 860mm Further information: plus pre-carriage / provision from stock at 26639 Wiesmoor, €1,280.00 / net Low-bed trailer chassis Steel welded construction Turntable with heavy-duty ball race Foldable rear support 2 wheel chocks with holders Full-width rear mudflap (not with forklift mounting) 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Prepared for widening to 3,000 mm (holes in outer frame with cover, not in rear taper) Lashing points low-loader: 1 pair tiedown recesses in the longitudinal beam, front, recessed in the cranking, each 10t 7 pairs of lashing mushroom points, fitted on top and side of the outer frame, each 10t: 1x front on cranking 5x in the lowered bed 1x in rear taper 12 pairs of lashing holes in the outer frame, each 5t (for ratchet strap hooks): 5x cranking, 6x lowered bed, 1x rear taper Drawbar arrangement for turntable trailer: Drawbar with certified 40mm towing eye Drawbar height adjustable via spring Axles and suspension: Drum brake axles, manufacturer’s choice Laser-aligned axle/chassis: reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel/rubber bushings and mechanical axle load equalisation (rocker compensator) Wheels and tyres: 235/75 R17.5” (manufacturer’s choice) Steel twin rims, factory silver Braking system: 2-line air brake system Spring-loaded parking brake 2 fail-safe coupling heads at front, with connecting lines to the truck, connecting lines approx. 60cm extended without ABS, with mechanical ALB, thus max. 60 km/h approval Electrics: 12 volt, multi-chamber lights, without side yellow LED lighting, with side reflectors 2 white position lights front 2 white/red contour marker lights rear 1x 7-pin 12V plug at front, with connecting cable, approx. 60cm extended 1 LED beacon with bracket, controlled via sidelight (removable) 2 pairs of illuminated warning boards, extendable to 3,000mm Floor: Front cranking with steel/chequer plate covering Bdodpfxoynvrwe Ac Ijd Storage box recessed in the transition to cranking Then approx. 70mm softwood floor, over wheel arches with steel/chequer plate covering Rear taper with 70mm softwood floor Low-bed area incl. rear taper 5900mm Access ramps: Steel ramps approx. 3000mm long, 750mm wide, laterally adjustable Wooden planked (tip area with steel/chequer plate) Hydraulic via tractor auxiliary drive with throttle, operated on LH side Hydraulic connection with SVK plug NW 10/3, including hose Operating instructions: With 10,000kg axle load, special permit required; only indivisible load possible! The stated gross vehicle weight is technically feasible; depending on the load, the GVW may not be achievable due to permitted axle/support/saddle loads. (Poor driving and tracking behaviour may result from incorrect load distribution) Country of registration / Plates: Country of registration: Germany With Dekra approval and certificate, for max. 60 km/h registration, towing vehicle LoF (Registration in Switzerland max. 40 km/h possible) Prepared for two-line registration plate holder Without contour markings / reflective strips according to ECE R 048 Paint finish: Frame hot-dip galvanised incl. passivation “15-year warranty against thr

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902030381, boş ağırlık: 5.960 kg, azami yük ağırlığı: 29.040 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2022, bir sonraki muayene (TÜV): 03/2027, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.740 mm, toplam uzunluk: 13.850 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", renk: siyah, The images are archive photos; the vehicle may still be in use! Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin, outer frame slightly sloped with 'Load-Lock Profile' for lashing straps, 24 t. 2-speed landing gear, single-sided operation, with straight lower section, no sliding support compensation. Note: Free landing leg corner dimension or rear swing clearance approx. 1930 mm without supports. Pull-out ladder at the rear, lateral door retainers, pallet box for 32 Euro pallets (extended version), ground clearance approx. 300 mm. Rear underride protection, galvanized transverse steel angle 'Blocker' as forklift and hinge protection, pallet stops both sides approx. 15–20 mm high, bolted design; loading height reduced by approx. 15–20 mm. Axles & Suspension SAF disc brake axles with 430 mm disc diameter, 'axle/chassis laser-aligned' to reduce tire wear and fuel consumption, air suspension, no lift axle. Braking System: 2-line compressed air brake system, color-coded lines for easier servicing. Spring-loaded parking brake. 2 error-proof coupling heads at the front, no connecting line, Haldex EBS, electronic braking system with EBS socket at the front, no connection cable, with raise/lower valve. Vehicle stability system, brake pad wear indication via EBS CAN bus signal for display in driver's cab (truck must be pre-equipped), axle load recognition via EBS CAN bus signal for display in cab (truck must be pre-equipped), no truck installation (no calibrated scale). Tire pressure monitoring system Haldex TPMS via EBS, without truck installation (truck pre-equipment required). Electrics: 24 Volt, multi-chamber LED lights with resistors, yellow side LED lights, LED license plate illumination. 2 white front position lights, 2 white/red lane guidance lights at the rear, 1 x 15-pin socket at front, no connecting cable, additional LED work light at rear, switched via reverse light. Floor: Phenolic resin panels approx. 30 mm thick, on longitudinal crossmembers, designed for high point loads for forklift axle loads up to max. 7,100 kg. Front bulkhead / front corner posts 2 x 580 mm high, steel corner posts, volume version, release for side curtain at front bulkhead. "Crash Blocker," inner lower section at approx. 140 mm height with steel impact protection. Center stanchions: 2 pairs sliding stanchions along entire length, 4 mounting pockets each, long pocket below, 2 pairs of stanchion positions. Insert slats: 5 rows of aluminum V-insert slats. Rear wall / rear corner posts Bsdpfxsy Tvwxe Ac Iodd Steel rear corner posts, up to roof edge, curtain engagement with round tube and tensioning ratchet Rear portal doors, double-leaf, each with 2 internal locking rods. Tarpaulin: Curtain, with welded-in horizontal and vertical belts, tension locks of stainless steel. Roof: Sliding roof, rear end-lift foldable, roof can be slid from rear to front, L-roof rail for automotive industry, internal width between roof rails approx. 2,490 mm, curtain color: white, non-elastic roof, minimal sagging of roof rail during loading/unloading, anti-ice system with one central hose, automatic vent via brake light, optimal rear rain gutter, top of end cross rail above doors. The images are archive photos; the vehicle may still be in use!

Durum: ikinci el, toplam ağırlık: 39.000 kg, ilk tescil: 01/2013, bir sonraki muayene (TÜV): 07/2025, Donanım: ABS, 59 cubic meter tipper Full aluminium body Unladen weight: 7,570 kg SAF axles with disc brakes Tyres: 60% Good condition Bdjdpfjvwhvpjx Ac Isd Belgian registration Price: €23,900 net

Durum: ikinci el, Fonksiyonellik: sınırlı işlevsellik, boş ağırlık: 6.575 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 07/2011, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1.300 mm, toplam uzunluk: 13.650 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/65R22,5, lastik durumu: 30 yüzde, dingil mesafesi: 1.360 mm, Üretim yılı: 2011, Donanım: ABS, Kullanılmış açık yarı römork Bdjdsy Ercbopfx Ac Iod Uzun demirler için çentikli çelik ön duvar Taban çelik profillerle güçlendirilmiş Yanlarda dikme cepleri Takma dikmeler için depo kutusu

Durum: ikinci el, kilometre: 200.826 km, güç: 250 kW (339,91 bg), ilk tescil: 07/2010, yakıt türü: dizel, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, bir sonraki muayene (TÜV): 05/2026, renk: gri, vites türü: mekanik, emisyon sınıfı: Euro 5, yükleme alanı hacmi: 5 m³, yükleme alanı uzunluğu: 4.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Donanım: ABS, klima, park ısıtıcısı, vinç, * ABS * Radio * Cruise control * Electric windows * Electrically adjustable mirrors Bsdpfx Aox Uu Acoc Iedd * Mirror heating * Sunroof * Rear window * Driver's comfort seat * Seat heating * Rear axle differential lock * Steel bumper * Amber rotating beacon * Top-mounted air intake * Trailer coupling * 2-line air connection * Hydraulic connection for trailer * Auxiliary heater * Alloy rims * 9-speed gearbox * Suspension: leaf/air * Payload: 8,550 kg * Permanent brake: engine brake ----Special body: Crane: Atlas 105.2-A2, foldable, with radio remote control + floor-mounted control, 2-stage hydraulic extension, fully hydraulic outriggers, oil cooler, 6th and 7th control circuits for slew drive and grapple operation. Read load diagram: lifts 5.05 t at 1.9 m, 2.9 t at 3.7 m, 1.94 t at 5.4 m, 1.49 t at 7.1 m.----Body: Meiller 3-way steel pallet tipper, headboard raised with excavator guard, spring-assisted sidewalls left + right, lashing eyes. Sale exclusively to commercial customers. FOR EXPORT SALES, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION PROVIDED WITHOUT WARRANTY, ESPECIALLY REGARDING EQUIPMENT & ACCESSORIES. All sales agreements, invoices, proforma invoices, orders, and sales discussions are based on our General Terms and Conditions (see imprint).

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2000, toplam uzunluk: 10.200 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.500 mm, süspansiyon: parabolik yaprak (yay), lastik boyutu: 385/65 R22,5, Üretim yılı: 2000, Donanım: ABS, = Additional options and accessories = Bodpozam A Defx Ac Ijdd - Leaf suspension = Further information = Tire size: 385/65 R22.5 Axle brand: ROR Suspension: Parabolic suspension Unladen weight: 5,880 kg Payload: 32,120 kg Gross vehicle weight: 38,000 kg Tipping: Rear

Durum: ikinci el, kilometre: 200.783 km, güç: 251 kW (341,26 bg), ilk tescil: 06/2015, yakıt türü: dizel, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, bir sonraki muayene (TÜV): 09/2026, renk: beyaz, vites türü: mekanik, emisyon sınıfı: Euro 6, yükleme alanı hacmi: 5 m³, yükleme alanı uzunluğu: 4.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Donanım: ABS, klima, vinç, * Sun visor * ABS * ASR (anti-slip regulation) * ESP (electronic stability program) * Radio * Cruise control * Electric windows * Electrically adjustable mirrors * Mirror heating * Roof hatch * Rear window * Driver comfort seat * Seat heating * Rear axle differential lock * Amber beacon * Top-mounted air intake * Trailer coupling * 2-line air connection * Duomatic air connection * Hydraulic connection for trailer * 9-speed gearbox * Suspension: leaf spring * Payload: 8,180 kg * Continuous brake: engine brake Bdedpfx Acoy R Hgxo Isd ----Special equipment: Crane: Atlas AK 135.2 E, foldable, with radio remote control + ground control + raised stand for remote operation, 3-stage hydraulic extension, 6th & 7th control circuit for slewing and grab operation. Recorded load diagram: lifts 5.7 t @ 1.9 m, 2.91 t @ 4.3 m, 1.92 t @ 6.2 m, 1.41 t @ 8.1 m, 1.13 t @ 10.1 m.----Body: Meiller 3-way steel pallet tipper, raised front wall, spring-assisted drop sides left & right, lashing eyes. Sale only to commercial customers. ONLY THE NET PRICE IS PAYABLE IN CASE OF EXPORT!!!!! ALL INFORMATION WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT & ACCESSORIES. All contracts of sale, invoices, proforma invoices, orders, and sales talks are subject to our general terms and conditions (see our legal notice).

Durum: ikinci el, kilometre: 200.783 km, güç: 251 kW (341,26 bg), ilk tescil: 06/2015, yakıt türü: dizel, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, bir sonraki muayene (TÜV): 09/2026, renk: beyaz, vites türü: mekanik, emisyon sınıfı: Euro 6, yükleme alanı hacmi: 5 m³, yükleme alanı uzunluğu: 4.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Donanım: ABS, klima, vinç, * Sun visor * ABS * ASR (traction control) * ESP (electronic stability program) * Radio * Cruise control * Electric window lifters * Electrically adjustable mirrors * Mirror heating * Roof hatch * Rear window * Driver comfort seat * Seat heating * Rear axle differential lock * Amber beacon * Top air intake * Trailer coupling * 2-line air connection * Duomatic air connection * Hydraulic connection for trailer * 9-speed * Suspension: leaf springs * Payload: 8,180 kg * Continuous brake: engine brake Bodpsy R Hgrofx Ac Iedd ----Special body: Crane: Atlas AK 135.2 E, foldable, radio remote control + walk-around control + elevated platform for radio control, 3-stage hydraulic extension, 6th and 7th control circuit for slewing drive and grab operation. Read load chart: Lifts 5.7 t at 1.9 m, 2.91 t at 4.3 m, 1.92 t at 6.2 m, 1.41 t at 8.1 m, 1.13 t at 10.1 m. ----Body: Meiller 3-way steel pallet tipper, raised front wall, leaf-spring-assisted side walls left + right, lashing eyes. Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE !!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT & ACCESSORIES. The basis of all purchase agreements, invoices, pro forma invoices, orders, and sales discussions are our General Terms and Conditions (see imprint for details).

Durum: yeni, boş ağırlık: 1.040 kg, azami yük ağırlığı: 2.460 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.140 mm, yükleme alanı genişliği: 1.750 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 2,2 m³, renk: gümüş, inşaat yüksekliği: 1.260 mm, çalışma genişliği: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Gross Vehicle Weight: 3,500 kg Payload: 2,460 kg Unladen Weight: 1,040 kg Bed Dimensions: 3140 x 1750 x 350 mm Tyres: 13-inch Loading Height: 740 mm Load area hydraulically tiltable via hand pump and electric pump Tipping Angle: rear 42°, sideways 50° Bdjdpfx Aewlabxec Ied - V-drawbar, fully hot-dip galvanized - Chassis and tipping platform fully hot-dip galvanized (immersion bath) - Tipping platform made from a single piece of steel - 4-stage hard chrome-plated tipping cylinder - Electric pump with hand pump - 13-pin plug and reversing light - Aluminum drop sides 350 mm high, completely removable - Rear tailgate can be swung or dropped - 6 tie-down rings mounted on the deck, each with 800 kg lashing capacity, Dekra certified - Jockey wheel - Channel prepared for easy retrofitting of aluminum ramps - Silver drop sides - Parabolic suspension Price includes vehicle registration document (Part II registration certificate and COC papers). We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide a free transit license plate. We repair trailers of all brands. Additional accessories available on request. Technical data, prices, and information subject to change and errors excepted. We accept no liability for errors or misprints. Features: reverse automatic brake, rubber torsion axle, independent suspension, tilting bed, jockey wheel, marker lights, chassis and tipping platform hot-dip galvanized by immersion, braked, includes warranty, V-drawbar hot-dip galvanized by immersion, tipping platform made from a single piece of steel, 4-stage hard chrome-plated tipping cylinder, electric pump with hand pump, 13-pin plug and reversing light, 350 mm high aluminum drop sides, completely removable, pendulum tailgate, 6 tie-down rings mounted with 800 kg lashing capacity each, Dekra certified, ramp channel prepared for easy retrofitting of aluminum ramps, silver drop sides, parabolic suspension.

Durum: yeni, boş ağırlık: 907 kg, azami yük ağırlığı: 2.130 kg, toplam ağırlık: 3.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.140 mm, yükleme alanı genişliği: 1.750 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 2,2 m³, renk: diğer, inşaat yüksekliği: 1.260 mm, çalışma genişliği: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Permissible total weight: 3,000 kg Payload: 2,130 kg Unladen weight: 870 kg Internal dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading height: 750 mm Load area hydraulically tiltable by hand pump and electric pump Tipping angle: rear 42°, sides 50° with 600 mm high steel extension, 4-sided pendulum-action including flat tarpaulin - V-drawbar, hot-dip galvanized - Chassis and tipper body hot-dip galvanized - Tipper body made from one piece of steel - 4-stage hard-chromed tipping cylinder - Hand pump, from 3,000 kg permissible gross weight with electric pump and hand pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear gate with pendulum function - 6 lashing rings mounted on the bed, each with an 800 kg lashing capacity, DEKRA-certified - Jockey wheel - Plank compartment pre-prepared for retrofitting aluminium ramps Price includes vehicle registration document (registration certificate part II and COC papers). We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun. On request, we can provide a free temporary registration plate. We repair trailers from all manufacturers. Additional accessories on request. Technical modifications, price changes and errors excepted. No liability is assumed for errors or misprints. Reverse-acting automatic brake, rubber suspension axle, independent suspension, tilting load platform, jockey wheel, marker lights, hot-dip galvanized chassis and tipper body, braked, including warranty, V-drawbar hot-dip galvanized, one-piece steel tipper body, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg permissible total weight with electric pump and hand pump, 13-pin plug and reversing lights, 350 mm high removable aluminium drop sides, rear gate with pendulum function, 6 lashing rings mounted on the bed with 800 kg capacity each, DEKRA certified, plank compartment pre-prepared for retrofitting aluminium ramps. Bjdpfx Acjyw Ez Us Ijdd

Durum: yeni, boş ağırlık: 1.040 kg, azami yük ağırlığı: 2.460 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.140 mm, yükleme alanı genişliği: 1.750 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 2,2 m³, renk: siyah, inşaat yüksekliği: 1.260 mm, çalışma genişliği: 1.903 mm, Manufacturer: Humbaur Model: 3-way Tipper HTK Alu 3500.31 Black Edition Permissible total weight: 3,500 kg Payload: 2,460 kg Unladen weight: 1,040 kg Body dimensions: 3,140 x 1,750 x 350 mm Tyres: 13-inch Loading height: 740 mm Loading platform hydraulically tiltable with hand pump and electric pump Tipping angle rear: 42°, side: 50° - V-drawbar, hot-dip galvanized in immersion bath - Chassis and tipping bridge hot-dip galvanized in immersion bath - Tipping bridge made of one-piece steel - 4-stage hard-chromed tipping cylinder - Electro-hydraulic pump with manual pump - 13-pin plug and reversing lights - 350 mm high side panels made of aluminum, fully removable - Rear flap can be swung - 6 lashing rings installed on the platform floor, tensile strength 800 kg each, Dekra certified - Jockey wheel - Channel as preparation for aluminum ramps, easy retrofitting - Black side panels - Parabolic suspension Price includes vehicle documents (registration certificate part II and COC papers) We have a large number of trailers from the following brands in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun On request, we can provide free temporary plates for transport. We repair trailers of all brands. Further accessories available on request. Technical modifications, price changes, and errors excepted. No liability for errors or misprints. Features: automatic reversing system, rubber suspension axle, independent suspension, tiltable platform, jockey wheel, marker lights, chassis and tipping bridge hot-dip galvanized in immersion bath, braked, including warranty, V-drawbar hot-dip galvanized in immersion bath, tipping bridge made of one-piece steel, 4-stage hard-chromed tipping cylinder, electro-hydraulic pump with manual pump, 13-pin plug and reversing lights, 350 mm high aluminum, fully removable side panels, swinging rear flap, 6 lashing rings on the platform floor (800 kg tensile strength each, Dekra certified), ramp channel prepared for easy retrofitting of aluminum ramps, black side panels, parabolic suspension. Bjdpfx Acjvtf Nfo Ijdd

Durum: ikinci el, boş ağırlık: 5.905 kg, azami yük ağırlığı: 33.095 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2024, bir sonraki muayene (TÜV): 04/2026, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.800 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, Üretim yılı: 2024, Donanım: ABS, Alman aracı Neredeyse yeni, sadece yaklaşık 30.000 km. İlk tescil: 06.05.2024 Fliegl SDS 390 Roadrunner Azami toplam ağırlık: 39.000 kg Boş ağırlık: 5.905 kg Net taşıma kapasitesi: 33.095 kg BPW akslar I-Lock Blitz tente Lastik ölçüsü: 385/65 R 22,5 Branda yazılı, fotoğraflar rötuşlanmıştır Bdsdpfx Aeynkikoc Isd Ek hizmetler mümkün! İhracat plakası (Kırmızı / 30 gün) Almanya Kısa süreli plaka (Sarı / 5 gün) Almanya Avusturya sevkiyat plakaları temin edilebilir Araç teslimatı (ücrete tabidir) İnternette verilen bilgiler bağlayıcı olmayan açıklamalardır ve garanti edilmiş özellikler değildir. Satıcı, yanlışlıklar, yazım hataları veya veri iletim hatalarından sorumlu değildir. Ara satış hakkı saklıdır. Satış sadece ticari müşterilere yöneliktir. Yalnızca genel satış şartlarımız geçerlidir.

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2016, toplam uzunluk: 11.250 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 3.600 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: diğer, Üretim yılı: 2016, çalışma saatleri: 2.508 h, Donanım: ABS, = Additional options and accessories = - Aluminum rims - Lift axle = Remarks = Chassis Aluminum rims: ✓ Chassis height: 100 cm Kingpin / fifth wheel diameter: 2 inch Kingpin / drawbar height: 120 cm Disc brakes: ✓ Body Year of manufacture: 2016 Bjdpfxoy Na Ime Ac Iedd Tank Capacity (liters): 40,000 Number of compartments: 1 Compartment volume (liters): 40,000 Tank material: Aluminum Test pressure: 3.0 bar Maximum working pressure: 2.0 bar Powder: ✓ = Further information = Technical information Chassis: Feldbinder Gross vehicle weight (GVW): 38,000 kg Axle configuration Axle make: Mercedes Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/65 R22.5; Tread left: 20%; Tread right: 20% Middle axle: Tire size: 385/65 R22.5; Tread left: 10%; Tread right: 15% Rear axle: Tire size: 385/65 R22.5; Tread left: 15%; Tread right: 15% Functionality Body make: Feldbinder Identification License plate: C418858 = Company information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durum: yeni, boş ağırlık: 850 kg, azami yük ağırlığı: 1.840 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.140 mm, yükleme alanı genişliği: 1.750 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 2,2 m³, renk: diğer, inşaat yüksekliği: 1.260 mm, çalışma genişliği: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 2700.31 Gross vehicle weight: 2,700 kg Payload: 1,850 kg Unladen weight: 850 kg Body dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading height: 745 mm Load platform hydraulically tiltable via hand pump Tipping angle rear: 42°, side: 50° - V-drawbar, hot-dip galvanized - Chassis and tipping platform hot-dip galvanized - Tipping platform made of single-piece steel - 4-stage hard-chromed tipping cylinder - Hand pump; from 3,000 kg gross vehicle weight, electric pump with manual override - 13-pin plug and reversing lights - Drop sides made from powder-coated, galvanized steel sheet – fully removable - Rear tailgate pendulum-mounted - 6 lashing rings mounted on the deck, 800 kg traction each, Dekra certified - Support wheel - Channel for ramps pre-fitted for easy retrofit of aluminum ramps Price includes vehicle registration document (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun On request, we provide a free transit license plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical changes, price modifications, and errors excepted. No liability for errors or misprints. Features: Auto-reverse, rubber suspension axle, independent suspension, tiltable loading platform, support wheel, marker lights, galvanized steel sheet, braked, with warranty, V-drawbar hot-dip galvanized, chassis and tipping platform hot-dip galvanized, tipping platform made of a single piece of steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg gross vehicle weight with electric pump/manual override, 13-pin plug and reversing lights, powder-coated removable side panels, rear pendulum tailgate, 6 lashing rings (800 kg each, Dekra certified), ramp channel prepared for easy retrofit of aluminum ramps. Bdjdpfx Acsrvgtvo Ijd

Durum: yeni, boş ağırlık: 870 kg, azami yük ağırlığı: 2.130 kg, toplam ağırlık: 3.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.140 mm, yükleme alanı genişliği: 1.750 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 2,2 m³, renk: diğer, inşaat yüksekliği: 1.260 mm, çalışma genişliği: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Gross Vehicle Weight: 3,000 kg Payload: 2,130 kg Unladen Weight: 870 kg Bed Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13-inch Loading Height: 750 mm Load area hydraulically tip-able with hand pump and electric pump Tipping Angle: rear 42°, side 50° - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized - Tipping bridge made from a single steel piece - 4-stage hard-chromed tipping cylinder - Hand pump (electric pump with hand pump from 3,000 kg gross weight) - 13-pin connector and reversing lights - Removable aluminium side panels, 350 mm high - Rear flap pendulum-mounted - 6 lashing rings mounted to the deck, each with 800 kg tensile strength, Dekra certified - Support wheel - Plank compartment pre-fitted for easy retrofit of aluminium planks Price includes vehicle registration certificate (Part II and COC documents) Bdodpfx Aorq Ew Tjc Ijd We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun On request, we can provide a free short-term license plate for transport. We repair trailers of all manufacturers. Further accessories upon request. Technical specifications, prices, and details subject to change and errors excepted. We do not accept liability for errors or misprints. Features: auto-reverse brakes, rubber suspension axle, independent wheel suspension, tipper bed, jockey wheel, marker lights, hot-dip galvanized chassis & tipper bridge, braked, including warranty, V-drawbar hot-dip galvanized, tipping bridge made from a single steel piece, 4-stage hard-chromed tipping cylinder, hand pump (electric pump with hand pump from 3,000 kg gross weight), 13-pin plug and reversing lights, 350 mm high fully removable aluminium side panels, pendulum rear gate, 6 lashing rings mounted to deck (800 kg tensile strength per ring, Dekra certified), plank box pre-installed for easy retrofit of aluminium ramps.

Durum: yeni, boş ağırlık: 988 kg, azami yük ağırlığı: 2.512 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.140 mm, yükleme alanı genişliği: 1.750 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 2,2 m³, renk: siyah, inşaat yüksekliği: 1.260 mm, çalışma genişliği: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Black Edition Bodpfxjvtf I Uo Ac Ijdd Gross vehicle weight: 3,500 kg Payload: 2,512 kg Unladen weight: 988 kg Internal dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading height: 740 mm Load platform hydraulically tiltable with hand pump and electric pump Tipping angle rear: 42°, lateral: 50° - V-drawbar, fully hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized by immersion - Tipping bridge made from one-piece steel construction - 4-stage hard-chromed tipping cylinder - Electro-hydraulic pump with manual backup - 13-pin plug and reversing lights - Drop sides made from 350 mm high aluminium, fully removable - Rear flap swing and tip function - 6 lashing rings mounted on deck, tractive force 800 kg each, Dekra certified - Jockey wheel - Preparation shaft for aluminium ramps for easy retrofit - Black drop sides Price includes vehicle registration documents (Part II registration certificate and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun If required, we can provide a free transfer license plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical and price changes as well as errors reserved. No liability for errors or printing mistakes. Reverse-automatic, rubber spring axle, independent wheel suspension, tiltable load area, jockey wheel, position lights, chassis and tipping bridge hot-dip galvanized by immersion, braked, incl. warranty, V-drawbar hot-dip galvanized by immersion, tipping bridge made from one-piece steel, 4-stage hard-chromed tipping cylinder, electro-hydraulic pump with manual backup, 13-pin plug and reversing lights, aluminium drop sides 350 mm high, fully removable, rear flap with swing function, 6 lashing rings mounted on deck, tractive force 800 kg each, Dekra certified, shaft for ramps prepared for easy retrofitting of aluminium ramps, black drop sides.

Durum: yeni, boş ağırlık: 907 kg, azami yük ağırlığı: 2.130 kg, toplam ağırlık: 3.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.140 mm, yükleme alanı genişliği: 1.750 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 2,2 m³, renk: diğer, inşaat yüksekliği: 1.260 mm, çalışma genişliği: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 GVWR: 3,000 kg Payload: 2,130 kg Unladen Weight: 870 kg Body Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading Height: 750 mm Loading Platform: Hydraulically tiltable with hand pump and electric pump Tipping Angle: Rear 42°, Side 50° With mesh or steel extension sides, 600 mm high, hinged on all four sides - V-drawbar, hot-dip galvanised - Chassis and tipping bridge, hot-dip galvanised by immersion - Tipping bridge made of one-piece steel - 4-stage hard-chromed tipping cylinder Bsdoktm Suspfx Ac Ijdd - Hand pump, for total weight above 3,000 kg: electric pump with hand pump - 13-pin plug and reversing lights - Aluminium side panels, 350 mm high, fully removable - Rear flap pendulum-mounted - 6 lashing rings fitted to platform floor, lashing force 800 kg each, Dekra tested - Support wheel - Shaft prepared for retrofitting with aluminium ramps Price incl. vehicle registration documents (registration certificate part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we provide a free temporary number plate for transfer. We repair trailers of all brands. Further accessories available on request. Technical specifications, prices, and information are subject to change and errors excepted. No liability for errors or misprints. Features: automatic reversing system, rubber torsion axle, independent wheel suspension, tiltable loading platform, support wheel, marker lights, chassis and tipping bridge hot-dip galvanised, braked, warranty included, V-drawbar hot-dip galvanised, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, for GVWR above 3,000 kg: electric pump with hand pump, 13-pin plug and reversing lights, aluminium dropsides 350 mm high, fully removable, pendulum-mounted rear flap, 6 lashing rings on platform floor, lashing force 800 kg per ring, Dekra tested, ramp shaft prepared for easy retrofitting with aluminium ramps.

Durum: yeni, boş ağırlık: 988 kg, azami yük ağırlığı: 2.512 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.140 mm, yükleme alanı genişliği: 1.750 mm, yükleme alanı yüksekliği: 350 mm, yükleme alanı hacmi: 2,2 m³, renk: diğer, inşaat yüksekliği: 1.260 mm, çalışma genişliği: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Permissible Total Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Bed Dimensions: 3140 x 1750 x 350 mm Tyres: 13-inch Loading Height: 740 mm Load Platform hydraulically tiltable with manual and electric pump Tipping Angle: Rear 42°, lateral 50° - V-drawbar, fully hot-dip galvanized - Chassis and tipper platform fully hot-dip galvanized - Steel tipper body made from one piece - 4-stage hard-chrome-plated tipping cylinder - Manual pump, electric pump with manual pump from 3,000 kg permissible total weight - 13-pin plug and reversing lights - Removable aluminium side walls, 350 mm high - Swivelling rear tailgate - 6 lashing rings mounted to the bed, each with 800 kg tensile force, Dekra tested - Support wheel - Channel for ramps prepared for easy retrofitting of aluminium ramps Price includes registration certificate (Part II and COC documents) We have a wide range of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun. Upon request, we provide a free temporary registration plate. We repair trailers of all brands. Additional accessories available on request. Technical changes, price changes and errors excepted. No liability for mistakes or typographical errors. Automatic reverse, rubber spring axle, independent wheel suspension, tilting platform, support wheel, marker lights, chassis and tipper platform fully hot-dip galvanized, braked, including warranty, V-drawbar fully hot-dip galvanized, steel tipper platform from one piece, 4-stage hard-chrome-plated tipping cylinder, manual pump, from 3,000 kg electric pump with manual backup, 13-pin plug and reversing lights, removable aluminium side walls 350 mm, rear tailgate swivelling, 6 lashing rings on the trailer bed, tensile force 800 kg per ring, Dekra tested, ramp channel prepared for easy installation of aluminium ramps. Bjdjrazk Uepfx Ac Ijdd

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2020, toplam uzunluk: 10.200 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 3.750 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: diğer, Üretim yılı: 2020, Donanım: ABS, Chassis Coupling pin / drawbar height: 120 cm Tank Capacity (liters): 40,000 Number of compartments: 1 Compartment capacity (liters): 40,000 Tank material: Aluminium Test pressure: 2.98 bar Maximum working pressure: 2.0 bar Powder: ✓ Bodsy Im Tyopfx Ac Iedd = Further Information = Axle configuration Tyre size: 385/65 R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alu wheels; Lift axle; Tyre tread left: 75%; Tyre tread right: 90% Rear axle 2: Alu wheels; Tyre tread left: 80%; Tyre tread right: 75% Rear axle 3: Alu wheels; Lift axle; Tyre tread left: 50%; Tyre tread right: 90% Weights Unladen weight: 4,500 kg Payload: 33,501 kg Gross vehicle weight: 38,000 kg Identification Registration number: C541367 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2020, toplam uzunluk: 10.900 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 3.600 mm, süspansiyon: hava, lastik boyutu: 385/65 R22..5, renk: diğer, Üretim yılı: 2020, Donanım: ABS, = Additional options and accessories = - Aluminium rims - Lift axle - Disc brakes = Notes = Chassis Aluminium rims: ✓ Chassis height: 100 cm Kingpin/ fifth-wheel diameter: 2 inch Kingpin/ drawbar height: 120 cm Disc brake: ✓ Structure Year of manufacture: 2020 Volume: 40 m³ Tank Capacity (liters): 40,000 Number of compartments: 1 Compartment capacity (liters): 40,000 Tank material: Aluminium Test pressure: 2.98 bar Maximum working pressure: 2.0 bar Powdered: ✓ = Further information = Axle configuration Tyre size: 385/65 R22.5 Axle manufacturer: SAF Suspension: Air suspension Front axle: Tyre tread left: 75%; Tyre tread right: 60% Center axle: Tyre tread left: 80%; Tyre tread right: 90% Rear axle: Tyre tread left: 60%; Tyre tread right: 75% Weights Unladen weight: 4,350 kg Payload: 33,650 kg Gross vehicle weight (GVW): 38,000 kg Functional Body manufacturer: Giesse Cisterne Identification Registration No.: C541370 Bedpfx Ajy Id N Sec Iedd = Company information = For more information on this unit, please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2021, toplam uzunluk: 10.900 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 3.600 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: diğer, Üretim yılı: 2021, Donanım: ABS, = Additional Options and Accessories = - Aluminium rims - Lift axle - Disc brakes = Remarks = Chassis Aluminium rims: ✓ Chassis height: 100 cm Kingpin diameter / fifth wheel: 2 inches Kingpin / drawbar height: 120 cm Disc brakes: ✓ Structure Year of manufacture: 2021 Volume: 40 m³ Bdodoy Id Nxopfx Ac Isd Tank Capacity (liters): 40,000 Number of compartments: 1 Compartment capacity (liters): 40,000 Tank material: Aluminium Test pressure: 2.98 bar Maximum working pressure: 2 bar Powder: ✓ = Further Information = Axle configuration Tyre size: 385/65 R22.5 Axle make: SAF Suspension: Air suspension Front axle: Tyre tread left: 50%; Tyre tread right: 15% Middle axle: Tyre tread left: 70%; Tyre tread right: 85% Rear axle: Tyre tread left: 15%; Tyre tread right: 50% Weights Unladen weight: 4,500 kg Payload: 33,500 kg Gross vehicle weight: 38,000 kg Functional Body manufacturer: General Service Identification Registration number: C559339 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durum: ikinci el, azami yük ağırlığı: 16.400 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2011, bir sonraki muayene (TÜV): 03/2026, yükleme alanı uzunluğu: 6.300 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.600 mm, Üretim yılı: 2011, Donanım: ABS, HUTTNER N4SZ20 2-AXLE STAKE TRAILER 4xAluminium Stake Racks 3.6t Permissible total weight: 18 t Technical total weight: 20 t Dimensions Frame length approx. 6,300 mm Overall width max. 2,550 mm Frame height approx. 1,180 mm Loading height approx. 1,360 mm Frame Welded steel frame construction Lightweight frame made from high-strength fine-grain steel Straight frame design, at the front Front stake racks mounted/clamped Low-maintenance ball bearing turntable Aluminium cover between longitudinal beams, bolted Fixed crane bracket at the front Drawbar Fixed drawbar with 40 mm DIN towing eye, retracted approx. 800 mm at the front (Y design), Silent bushing mounting, mechanical drawbar retainer BPW axles with drum brakes, S-cam brake 420/180 mm, load capacity 10 t/axle, suitable for "Z" tires, off-road version 8 tires 275/70 R 22.5 8 steel rims 7.50 x 22.5, with offset Brake system according to EC directives 71/320 or ECE R13 Two-line compressed air braking system EBS system 4S3M, sensors on 1st and 2nd axles Spring-loaded parking brake on 2nd axle Air tank Brake/air connecting lines with DUOMATIC EBS/ABS connection cable Air suspension without lift/lowering device 24-volt lighting system according to EC directives 2 partially LED five-chamber taillights "Europoint III" 2 LED position lights front 2 LED outline lights rear LED side marker lights 2 license plate lights Fixed connection cable with 1 x 15-pin plug Additional LED reverse lights, mounted left and right Paintwork: steel shot blasting, multilayer epoxy zinc phosphate primer and Spray painting with 2-component polyurethane topcoat Wheel hubs: powder-coated, black = powder-coated Underrun protection = galvanized Side impact protection, black = powder-coated Powder-coated attachment/installation parts black Hot-dip galvanized attachment/installation parts unpainted Side reflective contour markings in white/silver, entire length at the bottom, as per ECE 48 Rear reflective contour marking in red, as per ECE 48 2 pairs of single plastic mudguards with mandatory spray protection, non-removable Fixed steel rectangular tube underrun protection Aluminium sheet lamp carrier, painted black 1 wheel chock as per regulations, with holder Rubber apron on underrun protection Side impact protection made from aluminium profiles as per regulations Rear marking according to ECE standard, on the frame "EC Certificate of Conformity (COC)" or "EC Individual Approval" All information subject to change! ATTENTION: PRICE IS NET PLUS VAT Bdodpfx Acsygdqfe Ied German, English: JOSEF WhatsApp: We speak: German, Czech, Polish, Romanian, Russian, English