Kullanılmış Müller-Mitteltal 20 To. Tandem Haken-Containeranhänger satın al (37.164)

Koşul: yeni, azami yük ağırlığı: 13.830 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, Üretim yılı: 2026, * KA-TA-R 18 ----Braking System: * EBS-E (Electronic Braking System with RSS) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 9 t Gigant axles ----Suspension: * Air suspension with level control during tipping operation ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck dashboard via EBS signal (no installation required on the truck side) * 15-pin electrical connector * LED lighting with galvanized protective canopy ----Drawbar Eye / Drawbar: * Drawbar with 50 mm flange drawbar eye (adjustable by +77 mm and -33 mm via offset plate) ----General Attachments: * Front support winch * Foldable galvanized steel underrun protection for paver feeding * Closed single-piece plastic mudguards * Front wall platform made of grating with access step on the drawbar and grab handles on the front wall ----Chassis: * Chassis made of fine-grain steel ----Tipper Body: * Steel 3-way tipper body with aluminium sidewalls, asymmetrical — continuous without center stanchion — pivoting via manual central locking, left side drop-down with side wall spring assist * Rear wall — made from HBW 400 steel — pendulum-mounted with automatic 2-claw locking system * 5 mm steel floor made of HBW 450 steel ----Load Securing: * Four 3 t lashing rings recessed and foldable per side, embedded in the steel floor Pgedjx Ipbyjpfx Aibok ----Tarpaulin: * Roll tarp — agate grey, similar to RAL 7038 * Tarpaulin tensioned using lateral tensioning ratchets and tensioning rubbers at front and rear ----Paintwork: * Chassis, underrun protection, and drawbar hot-dip galvanized * Axles, air reservoir, support winch, and flange drawbar eye painted in black * Superstructure painted in RAL 9010 pure white ----Additional Information: * Reinforced and certified superstructure according to EN 12642 XL including load securing certificate up to 19 t * New vehicle, unregistered, with manufacturer’s warranty * Subject to errors and prior sale * Sample images (images may differ from the actual vehicle due to special equipment) ----Delivery time: * Vehicle available from CW 16/2026

Koşul: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: Pgsdpfsxf Skpex Aibok * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Koşul: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * RAK 18.0 external roller with rear tipping function ----Brake system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when the brakes are uncoupled) ----Drawbar: * Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General attachments: * Plastic toolbox approx. 858 x 500 x 500 mm, mounted right side * Enclosed plastic mudguards, front and rear axles * Enclosed side underrun protection Pjdox Ipbmspfx Aibegk * Rear bolted underrun protection * Storage box for container nets made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm * Foldable A-sign at rear * Rear bumper pads ----Electrical / Lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * 15-pin 24V power plug * LED lighting system for 12 & 24V * 2 additional LED reversing lights * RDÜ tire pressure monitoring system ----Suitable for container lengths: * For containers from 6,500 mm to 7,000 mm ----Container deck / tipping bridge: * External roller guidance via flat bar stops with a clear width of approx. 2,180 mm, in combination with 3 lateral centering pieces per side for container guidance * To receive and stop the container rollers, two recessed roller bearings connected to the tipping frame are installed at the rear, with pneumatically actuated securing to prevent longitudinal movement * Positive locking of the roll containers achieved via a pneumatically operated transverse clamping system mounted at the front of the tipping frame and accessible externally (single-side operation) * Chassis frame internally fitted with a rearward-tipping main frame – single-tube motor-hydraulic tipping system * Tipping angle: 42° * Rubber pads between chassis and tipping frame * Containers are loaded/pushed from the front * Hot-dip galvanized chassis ----Tyres: * Single tyres 385/55 R 22.5 ----Loading height: * Unladen approx. 1,270 mm ----Paintwork: * Rear underrun protection and locking components (without top coat) * Turntable, air tanks, axles, slewing ring, and drawbar painted in black * Hot-dip galvanized ----Information: * For container transports according to DIN 30722 part 1 * New vehicle without initial registration with manufacturer’s warranty * Errors and prior sale excepted * Sample pictures (photos may vary from actual vehicle due to special features) ----Delivery time: * Available from calendar week 24/2026

Koşul: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis Podpexf Skvjfx Aibogk * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Koşul: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Braking System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye ----General Accessories: * Jost mechanical support winch at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic tool box, approx. 750 x 350 x 300 mm, mounted laterally on the right * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Body: * Mesh hooks on the side and rear at the central locking mounts, plus 2 on the front wall * Three-way steel pallet tipper body (continuous side walls – no center stanchions – can be folded down with board wall spring lifter) * Rear stanchions bolted * Combo steel wing doors, rear, 2-leaf, asymmetrically split, can pivot and lock up to 270°, not foldable, plus with additional swinging frame for automatic rear flap opening during tipping; locking via galvanized turn bar lock and central locking system * Deactivation function for automatic rear flap operation when tipping in reverse with the wing door open * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment accessible from the rear, recessed under the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper bed, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Painting of side walls in a different RAL color available at extra charge * Axles, springs, flange eye, air tanks, and support winch painted black ----Information: Psdpfxol Thyxe Aibjgk * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle, unregistered, with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: * Available immediately ex Egestorf on the A7

Koşul: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release mechanism for spring-actuated cylinders Pgedpfx Ajl Thymjibok * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Platform: * Mesh hooks on the sides and rear within the central locking mounts, plus 2 hooks on the front wall * Steel pallet three-way tipper body (continuous sidewalls – without intermediate stanchions – foldable, with tailgate spring assist) * Bolted rear stanchions * Combination steel double rear wing doors, asymmetrically split, 270° swing and lockable but not foldable, plus additional pendulum frame for automatic tailgate opening during tipping. Locking via galvanized locking bar and central locking. * Deactivation feature for automatic rear tailgate when tipping backward with an open wing door * 4 mm steel floor plate * Ramp rack at rear for drive-up ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing eyes on each side, integrated in the outer frame ----Ramps: * 1 pair of aluminum drive-up ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment fitted underneath the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical drop legs: hot-dip galvanized * Sidewalls and tailgate: painted RAL 9010 pure white * Other RAL colors for sidewalls available at extra cost * Axles, springs, flange towing eye, air reservoirs, and landing leg: painted in black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, sold with manufacturer's warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf at the A7

Koşul: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, RAK 18.0 external roller with rear tipper function ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * BPW Eco Plus axles Pgodpfxsx Ipa As Aibok ----Suspension: * Air suspension (automatic lowering when the brake is disengaged) ----Drawbar: * Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General attachments: * Plastic toolbox - approx. 858 x 500 x 500 mm - mounted right side * Closed plastic mudguards, front & rear axle * Closed side underrun protection * Rear underrun guard bolted * Container net storage box made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm * Foldable A-sign at rear * Rear impact protection buffers ----Electrics / lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * 15-pin 24V power connector * LED lighting system for 12 & 24V * 2 additional LED reversing lights * RDÜ tire pressure monitoring system ----Suitable for container lengths: * For containers from 6,500 mm to 7,000 mm ----Container guidance surface / tipping frame: * External roller guidance via flat steel rails with a clear width of approx. 2,180 mm, in combination with 3 centering blocks per side for container alignment * To accommodate and secure the container rollers at the rear, there are 2 recessed roller bearings connected to the tipping frame, equipped with a pneumatically operated longitudinal anti-slip lock * The positive locking of the roll-off containers is achieved via a pneumatically operated cross clamp unit (one-sided operation) integrated into the front of the tipping frame and accessible from the outside * Chassis frame with internally rear-tippable main frame - motor hydraulic tipping system in single-tube design * Tipping angle: 42° * Rubber pads between chassis and tipping frame * Containers are loaded from the front; hot-dip galvanized chassis ----Tyres: * Single tyres 385/55 R 22.5 ----Loading height: * Unladen approx. 1,270 mm ----Paintwork: * Underrun protection and locking components (without top coat) * Turntable, air reservoir, axles, slewing ring, and drawbar painted in black * Hot-dip galvanized ----Information: * Suitable for container transport according to DIN 30722 Part 1 * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale * Sample images (actual vehicle photos may vary due to optional equipment) ----Delivery time: * Available from CW 24/2026

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 2.140 kg, azami yük ağırlığı: 12.260 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, süspansiyon: çelik, lastik boyutu: 285/ 70 R 19,5, dingil mesafesi: 1.140 mm, römork freni: frenli römork, Üretim yılı: 2026, - TM-TA 14.4: - incl. 2 ratchet tensioners permanently mounted on the outer frame with chain box, each side with eyelet and quick-shortener in Y-special version, 6.3 t Pgjdpfxjxuhy Ee Aibok - Tensioning force with load securing certificate - Wabco EBS - RDÜ tire pressure monitoring system - Emergency release device for spring brake cylinders - Drum brakes - 2 x 7 t Gigant axles - Parabolic springs with compensation unit - Jost landing gear at the front - 2 x external folding supports at the rear - Height-adjustable hot-dip galvanized drawbar +/- 150 mm - Hot-dip galvanized chassis - 15-pin electrical connector - LED tail lights - Enclosed single plastic mudguards - Foldable A-panel at the rear - Plastic impact protection buffers on underrun protection - Hot-dip galvanized underrun protection with integrated chain storage box B = 370 mm x D = 420 mm x H = 480 mm, front left & right - 2 interchangeable skip stops for centering skips laterally - Skip stops at the front with pendulum stop, insertable in 4 positions - 2 x 5.3 t UVV lashing rings per side for attaching tensioning elements - Axles, springs, air tanks, and landing leg painted in black - Subject to errors and prior sale - New vehicle with manufacturer’s warranty - Available from calendar week 05 / 2026

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 2.140 kg, azami yük ağırlığı: 12.260 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 285/ 70 R 19,5, dingil mesafesi: 1.140 mm, Üretim yılı: 2026, - TM-TA 14.4: - Wabco EBS - RDÜ tire monitoring system - Emergency release device for spring brake cylinders - Drum brakes - 2 x 7 t Gigant axles - Parabolic suspension with equalizing unit - Jost support winch at the front, 2 x external drop-down supports at the rear - Height-adjustable +/- 150 mm hot-dip galvanized drawbar - Hot-dip galvanized chassis - 15-pin power connector - LED tail lights Pgjdpfx Asxu Hplsibek - Enclosed plastic single fenders - Folding A-sign at the rear - Plastic impact protection buffers on the underride guard - Hot-dip galvanized underrun protection with integrated chain storage box (W = 370 mm x D = 420 mm x H = 480 mm) front left & right - 2 relocatable trough stops for lateral centering of the containers - Front container stops with pivoting stop, insertable in 4 positions - On each side, 2 x 5.3 t UVV lashing rings for attaching securing elements - Axles, springs, air tanks, and support winch coated in black - Errors and prior sale excepted - New vehicle with manufacturer's warranty - Available from week 05 / 2026

Koşul: yeni, azami yük ağırlığı: 23.700 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with manual lowering at rear * Pressure gauge for axle load determination (separate display for both air suspension circuits) * Side underrun protection * Rear swing-out supports on chassis frame * Mechanically adjustable warning sign packages, front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, both with spray protection * Reflective contour marking tape on sides and rear * Hinged (hot-dip galvanized) lid for toolbox on the turntable platform * LED tail lights * Removable warning beacon at the rear * Drawbar with 40 mm draw eye and adjustable height via tension spring & turnbuckle * 2 x 7-pin electrical connectors * Four stake pockets on each side, each with 2 t lashing point * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on main frame of the turntable platform, 5 pairs of UVV (Accident Prevention Regulation) lashing rings, tiltable and lowerable, loadable in all directions and recessed into the outer frame - 13.4 t in corner positions, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not present on rear beveled section) * Widening boards stored in the center of the loading area * Hydraulic one-piece ramps (approx. 3,000 x 720 mm), adjustable in width * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach ramp) Pgjdpfx Aol Tpwyeibjk * Chassis, turntable, drawbar, folding extensions & ramps hot-dip galvanized * Axles, turntable, air tanks etc. painted in black * Tyres: 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg gross vehicle weight * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 9.070 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.010 mm, yükleme alanı yüksekliği: 325 mm, Üretim yılı: 2025, * ETS-TA-B 11,9: * Wabco EBS (elektronik fren sistemi) * RDÜ (lastik basıncı izleme) * Kampanalı frenler, 2 x 5,5 ton Gigant akslar * Denge ünitesi ile birlikte parabolik yaylar * Yaklaşık 300 mm yükseklik ayarlı çekme kolu * BPW destek ayak mekanizması * Arka tarafta mekanik düşme ayakları * Önde sağda ön duvarda plastik alet kutusu * Yan çarpışma koruması * LED aydınlatma Pgodpewyhzvofx Aibok * 50 mm iğne yapraklı ahşap zemin * Ön duvar ve arka travers köşelerinde 1 x 6,3 ton bağlama halkası ve yanlarda harici çerçevede 2 x 6,3 ton UVV bağlama halkası * Tek parça mekanik ızgara rampalar, yay mekanizmalı, tek kişiyle kullanılabilir, yaklaşık 2.350 x 870 mm (iç mesafe 20 mm, rampalar kaydırılamaz) * Ön duvar, yan duvarlar, çamurluklar ve çekme kolu sıcak daldırma galvanizli * Akslar, yaylar, hava deposu ve ön destek mekanizması siyaha boyalı * Tam üretici garantili yeni araç * Hatalar ve ara satış hakları saklıdır * Hemen Egestorf'tan teslim edilebilir

Koşul: yeni, azami yük ağırlığı: 8.500 kg, toplam ağırlık: 11.990 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Donanım: ABS, * KA-TA-R 11.9 Masterline: * Front wall and floor hot-dip galvanized * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 7 t Gigant axles * Parabolic springs with tandem compensating unit * Hot-dip galvanized drawbar, height-adjustable by approx. 300 mm, with 40 mm flange towing eye * Jost mechanical landing gear at front * Rear: 2 mechanical hot-dip galvanized folding supports * 15-pin electrical connector * Multi-chamber tail lights * Hot-dip galvanized bolted underrun protection * Tool box made of galvanized sheet steel, mounted right-hand side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel pallet - three-way tipper body * Continuous side walls in white, top sections with internal tube reinforcements, drop-down without center stanchions, with sideboard spring lift * Drop-down and swinging tailgate with manual central locking * Screwed, hot-dip galvanized rear stanchions * Each corner fitted with one 5 t lashing point; each side with four 3 t lashing rings recessed into outer frame * 4 mm fine-grained steel floor plate * Net hooks * Rear mounting rail for loading ramps * Plug-in steel side extensions, 500 mm high, swinging on all three sides * Reinforced body with load securing certificate according to EN 12642 XL * 1 pair of aluminum loading ramps approx. 3,570 x 400 mm (capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment recessed into the chassis below the loading deck * Axles, springs, air reservoir and landing gear painted in black * Tyres: 285/70 R 19.5 * Side wall color: RAL 9010 pure white * New vehicle with manufacturer’s warranty Pgjdpfeq Hg D Hjx Aibok * Subject to prior sale and errors * Immediately available ex works Egestorf (A7 motorway)

Koşul: yeni, azami yük ağırlığı: 14.650 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2024, * RS-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release mechanism for spring brake cylinders * Disc brakes * Duomatic brake coupling * 2 x 10 t SAF axles * Air suspension with automatic lowering when uncoupling the brakes * Drawbar, 2,300 mm long with 40 mm towing eye and height adjustment via tension spring & spindle * Right-side plastic toolbox, enclosed plastic fenders * Side closed underride protection, usable as advertising space * Rear underride protection with 2 impact buffers * Foldable "A" sign at the rear for waste disposal * LED rear lights with protective cover * 2 x 7-pin power sockets * Chassis hot-dip galvanized (excluding air tank, axles, drawbar, etc.) * Roller conveyor length approx. 6,950 mm * Rolling container secured by pneumatic 4-point claw locking system * At the front, 2 plug-in container stops with 2 additional plug-in positions * Unladen ride height approx. 1,165 mm * --Technically permissible gross weight of 20,000 kg-- * Suitable for 5,000 – 7,000 mm container lengths Psdpfx Ael Tqkwoibsgk * New vehicle with manufacturer's warranty * Errors and intermediate sale excepted * Immediately available ex works Egestorf

Koşul: yeni, azami yük ağırlığı: 14.650 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2024, * RS-T 18.0 / 018: Pgedpfx Ajl Tpy Hoibjk * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinder * Disc brakes * Duomatic brake coupling * 2 x 10 t SAF axles * Air suspension with automatic lowering when the brake is uncoupled * Drawbar 2,300 mm long with 40 mm towing eye and height adjustment via draw spring & spindle * Plastic toolbox on the right side, closed plastic fenders * Side closed underride guard usable as an advertising surface * Rear underrun protection with 2 crash buffers * Folding "A"-board at the rear for waste disposal * LED rear lights with protective canopy * 2 x 7-pin electrical plugs * Chassis hot-dip galvanized (except air tank, axles, drawbar, etc.) * Roller track length approx. 6,950 mm * Rolling container secured with pneumatic 4-point claw locking system * At the front are 2 plug-in container stops with 2 additional plug-in positions * Ride height unladen approx. 1,165 mm * --Technically permissible gross weight of 20,000 kg-- * Suitable for container lengths of 5,000 – 7,000 mm * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 9.070 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.010 mm, yükleme alanı yüksekliği: 325 mm, Üretim yılı: 2024, * ETS-TA-B 11,9: * Wabco EBS (elektronik fren sistemi) * RDÜ (lastik basıncı izleme) * Kampanalı frenler, 2 x 5,5 ton Gigant akslar * Dengeleme ünitesine sahip parabollü yaylar * Yaklaşık 300 mm yükseklik ayarlı çekme kirişi * BPW destek vinci * Arka mekanik düşme ayakları * Ön sağda yan duvara monte plastik alet kutusu Pgsdpewyhzpsfx Aibok * Yandan çarpma koruması * LED aydınlatma * 50 mm çam kereste taban * Ön duvar ve arka kiriş köşelerinde 1 x 6,3 ton sabitleme halkası; yan dış şasede ise her iki yanda 2'şer adet 6,3 ton UVV bağlama halkası entegre * Tek parça mekanik ızgara tip rampalar, yay mekanizmalı, tek kişi kullanımına uygun, yaklaşık 2.350 x 870 mm (iç mesafe 20 mm, rampalar kaydırılamaz) * Ön duvar, yan paneller, çamurluklar ve çekme kirişi sıcak daldırma galvanizli * Akslar, yaylar, hava tankı ve ön destek vinci siyah renkle boyanmış * Tam üretici garantili yeni araç * Hatalar ve ara satış hakkı saklıdır * Egestorf'tan hemen teslim

Koşul: yeni, azami yük ağırlığı: 8.450 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 22.420 mm, yükleme alanı yüksekliği: 1.500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline: * incl. 1 m lattice extensions * EBS braking system * Emergency release device for spring brake cylinders * RDÜ tire pressure monitoring system Pgjdpfx Ajp Ncl Ssibok * Drum brakes * 2 x 5.5 t BPW axles * Parabolic suspension with tandem equalizer * 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange towing eye * Jost mechanical landing gear at the front * Two mechanical, hot-dip galvanized folding supports at the rear * Tool box made of galvanized sheet steel, right side * 15-pin power connector * Bolted underrun protection with LED tail lights * Plastic quarter mudguards * Net hooks on the sides and rear within the central locking mounts, plus 3 external on the front panel * Hot-dip galvanized chassis * Fully galvanized steel three-way tipper body * Continuous side walls without central stanchion, foldable with drop side spring lift * Tailgate foldable and swinging via manual central locking * Hot-dip galvanized bolted rear stanchion * 1 x 5 t recessed and folding lashing ring in each corner, plus 4 x 3 t lashing rings per side * Recessed and folding lashing rings in outer frame * 4 mm steel floor * Rear receiving rail for drive-on ramps * Body reinforced with load securing certificate according to EN 12642 XL * 1 pair aluminium drive-on ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment from the rear, recessed under the loading deck in the chassis * Tires: 235/75 R 17.5 * Axles, springs, air reservoir, drawbar, and landing gear painted black * Side wall color: hot-dip galvanized * 1 m lattice extensions galvanized * Sample images * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex works Egestorf (A7 motorway)

Koşul: yeni, azami yük ağırlığı: 10.700 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 1.500 mm, Donanım: ABS, * KA-TA-R 14.4: * Front wall and floor hot-dip galvanized * Wabco ABS * Emergency release device for spring brake cylinders Pedop Ncmaepfx Aibjgk * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalization unit * Height-adjustable (approx. 300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye * Jost mechanical landing leg at the front * Rear: 2 mechanical, hot-dip galvanized fold-down supports * 15-pin electrical connector * Multi-chamber tail lights * Bolt-on hot-dip galvanized underrun protection * Lockable toolbox made of galvanized sheet steel, mounted right side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel pallet three-way tipper body * Continuous white side walls with internal tube reinforcement, without center posts, folding, with drop-side spring assist * Tailgate foldable and pendulum-type with manual central locking * Bolted, hot-dip galvanized rear stanchions * Each corner fitted with 1 x 5 t lashing point, and 4 x 3 t lashing rings embedded in the outer frame on each side * 4 mm fine-grain steel floor plate * Net hooks, rear rail for loading ramps * Prepared for later retrofit of drop side extensions * Reinforced body with cargo securing certificate according to EN 12642 XL * 1 pair of aluminium loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear lockable storage compartment recessed under the load bed in the chassis * Axles, springs, air tanks, and landing leg painted in shade of black * Side wall body color: RAL 9010 pure white * 1 meter galvanized mesh extensions * Tires: 285/70 R 19.5 * Sample images * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Koşul: yeni, azami yük ağırlığı: 23.700 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2024, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system (TPMS) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with manual lowering at the rear Pgjdsl Tq Eujpfx Aibjk * Pressure gauge for load weight determination (axles separated on 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle with closed plastic fenders, rear axle with straight, galvanized steel splash guards, each with spray protection * Reflective contour marking tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox in the turntable platform * LED taillights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 2 x 7-pin electrical sockets * Four stake pockets per side, each with 2 t lashing possibility * Load securing package consisting of: 2 lashing eyes (6.4 t) at front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and integrated into the outer frame – 13.4 t at the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for a total vehicle width of 3 m (not in the rear slope) * Widening planks stored in the center of the loading area * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Loading area above turntable: approx. 1,960 x 2,520 mm * Loading height unloaded approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unloaded approx. 910 mm (incl. 860 mm drive-up slope) * Chassis, turntable, drawbar, folding widenings, and ramps hot-dip galvanized * Axles, turntable, air tanks, etc. painted in black tone * Tires: 235/75 R 17.5 * Payload approx. 24,000 kg with a total weight of 30,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: ikinci el, azami yük ağırlığı: 8.750 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, toplam genişlik: 2.550 mm, Üretim yılı: 2023, Müller Mitteltal KA-TA-R 11.9 Tandem Three-Way Tipper with Many Extras. Gross weight: 11,900 kg. Standard payload approx.: 8,750 kg. Internal dimensions: 5,000 x 2,420 x 500 mm. Tyres: 385/55R19.5. 4-coat single-colour paint. Wheels: silver. Chassis/underrun protection: hot-dip galvanized. Platform with front wall: hot-dip galvanized. Axles/springs/air tank etc.: black. Side and rear walls: RAL 2011 deep orange. Reinforced and certified body according to EN 12642 XL incl. load securing certificate (only in combination with 500 mm high steel drop sides). Rear stakes bolted, hot-dip galvanized, no top coat. Lashing points LC 5,000 daN recessed at the front. Net hooks integrated laterally and at the rear in the central locking mounts of the base side wall, plus 2 units on the front wall. BPW axles instead of GIANT. Tipping platform with fixed front wall, hot-dip galvanized version, with bolted, galvanized rear stakes, no additional coating (not applicable with HARDOX floor). Due to the system, waviness may occur during hot-dip galvanizing, especially with large floor sheets; complaints regarding this are excluded from warranty coverage. Tyres 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, code 08.940, ramp length 3,570 mm required). 1 plastic toolbox, black, lockable, W=750 x H=350 x D=300 mm (45 kg capacity with even load), location: on right side of chassis frame in driving direction. 1 pair ALU loading ramps without wheel track (8 t/pair), 3,570 x 400 x 105 mm, suitable for rubber-tyred and tracked vehicles, 55 kg/unit. Two-step access in front of the front wall, on left in driving direction (hot-dip galvanized). Connection lines extended for agricultural and forestry tractors. Further information: New: No Pgsdpfx Aovy Tvtsibsk

Koşul: yeni, azami yük ağırlığı: 8.770 kg, Üretim yılı: 2025, ABS Müller Mitteltal ETÜ TA R 11.9 Tandem Low Loader with Numerous Extras Pedpfx Aiexcxmfobogk Equipment: - 2 spring-assisted lifts for 400mm high steel drop sides - Reinforced and certified superstructure in accordance with EN 12642 XL load securing certification - 10 UVV lashing rings in pre-existing lashing point grid in the outer frame - Additional wooden flooring in clamped design - Tyres 235/75R17.5 - Four BPW axles instead of GIGANT - Platform extension by 870 mm to a total length of 6,270 mm - One-piece ramps with hot-dip galvanized anti-slip grating - Lockable toolbox with a load capacity of 45 kg Paintwork: - Wheels: silver - Chassis/front wall/drawbar/rear wall/stakes/ramps: hot-dip galvanized - Axles/springs: black - Side walls: RAL2011 deep orange We are pleased to offer you suitable financing, hire purchase, or leasing options. Delivery or dispatch available upon request. We always have a selection of new units in stock as well as demo units. Contact us! We rent vehicles and machinery with or without drivers. A wide range of used machines and devices always available. Technical changes, errors, and prior sale reserved.

Koşul: ikinci el, azami yük ağırlığı: 7.950 kg, toplam ağırlık: 11.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 08/2010, bir sonraki muayene (TÜV): 02/2026, yükleme alanı uzunluğu: 6.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 11.000 kg Pedpfxsx E I Uto Aibjgk Boş ağırlık: 3.050 kg Yük kapasitesi: 7.950 kg Toplam uzunluk: 8.100 mm Yükleme uzunluğu: toplam yaklaşık 6.000 mm Genişlik: 2.550 mm / yükleme genişliği yaklaşık 2.470 mm Yükleme yüksekliği: 900 mm Diğer bilgiler - Yüksekliği ayarlanabilir çekiş kolu - Destek ayağı - 400 mm yan duvarlar, yaylı - E-tekerlek - BPW akslar - Yaylı rampa, ızgara tipi, yandan kaydırılabilir - Tırmanma çıtaları, arka destek - Büyük bağlama paketi

Koşul: ikinci el, azami yük ağırlığı: 10.100 kg, toplam ağırlık: 13.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2001, bir sonraki muayene (TÜV): 11/2025, yükleme alanı uzunluğu: 6.000 mm, yükleme alanı genişliği: 2.460 mm, yükleme alanı yüksekliği: 1.000 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 13.500 kg Boş ağırlık: 3.400 kg Yük kapasitesi: 10.100 kg Pgsdpfx Ajw Nu I Teibok Toplam uzunluk: 8.100 mm Yükleme uzunluğu: 6.000 mm Genişlik: Toplam genişlik 2.550 mm / Kasaboyu genişlik 2.460 mm Yükleme yüksekliği: yaklaşık 1.000 mm Diğer bilgiler: - Lastik ebadı 285/70R19,5 - Yan paneller 400 mm, 1x bölmeli

Koşul: ikinci el, toplam ağırlık: 13.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2018, yükleme alanı uzunluğu: 5.060 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2018, MUELLER MITTELTAL Römork (KİPPER) 5,06 m İTHAL / KAZASIZ ÇOK İYİ DURUMDA! ? ÜRETİM YILI: 2018 HAVA SÜSPANSİYONU LASTİK EBATI: 385/55R19,5 DİNGİL MESAFESİ: 115 YÜKLEME PLATFORMU: 506 x 242 x 50 cm AZAMİ TOPLAM AĞIRLIK: 13.500 kg KAPASİTE: 6.350 kg TEL: Pgjdpfx Aoy E Ecnsibsk KUBA – POLONYA, İNGİLİZCE, ALMANCA, İTALYANCA SEBASTIAN – POLONYA, ALMANCA, İTALYANCA, ????? LASZLO – MACARCA COSTEL – ROMENCE (Romence tüm ihracat işlemlerini, plaka dahil, tamamlıyoruz) RADEK – ?????

Koşul: ikinci el, boş ağırlık: 4.190 kg, azami yük ağırlığı: 13.810 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2016, süspansiyon: hava, lastik boyutu: 385/55R22,5 160J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 385/55R22,5 160J, arka lastik boyutu: 385/55R22,5 160J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Bağlama halkaları, 800 mm alüminyum yan duvarlar, rampalar için ek ücret 800 €, -- yazım hataları, değişiklik ve yanlışlık yapma hakkı saklıdır, örnek resimler --, Daha fazla bilgi için: ! Pjdpfx Aoy Hc T Hsibegk

Koşul: ikinci el, boş ağırlık: 3.680 kg, azami yük ağırlığı: 10.720 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2021, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, süspansiyon: çelik, lastik boyutu: 385/55R19,5 156J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 385/55R19,5 156J, arka lastik boyutu: 385/55R19,5 156J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, YENİ GİBİ, geniş lastik, GALVANİZLİ damper kasası, 12 adet sabitleme halkası, 600 mm yan paneller, rampalar için ek ücret 1.000 €, -- Baskı hataları, yanlışlıklar ve değişiklik hakkı saklıdır, örnek görseller --, Daha fazla veri için: !, Detaylı bilgi: ! Psdpfx Aiey E H Rysbsgk