Kullanılmış Rsm Abrollcontainer 38M³ Mit Hydr. Heckklappe satın al (9.560)

Durum: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profi ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering function and RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment ----Lighting / Electrical System: * EBS multi-voltage system with 12 & 24 V electrics Gisdpfxol Tnu Ao Aqtju * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at the rear * 2 LED reversing lights (switched by reverse gear) ----General Attachments: * Manometer - pressure gauge for determining load weight (axles separated over 2 air suspension circuits) * Side underrun protection * Swing-out supports at rear of chassis frame * Mechanically adjustable warning board sets front and rear * Front axle plastic quarter mudguards with spray protection * Rear axle straight galvanized steel mud flaps with spray protection * Reflective contour tape on sides and rear * Toolbox, black powder-coated galvanized steel, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low Loader Deck: * Extension in front of turntable platform approx. 490 mm long with 45° corners * ROBOT-WELDED anti-slip covering on steel plate of the turntable platform * Hardwood flooring on running surfaces of the low loader deck ----Load Securing (load securing package includes): * In front of the front wall carrier left & right, 1 x 13.4 t UVV lashing point each * 4 holes per side in the turntable platform, each with a lashing capacity of 2 t * 1 pair of lashing points (13.4 t) suspended at the rear left & right in front of the rear cross member * Per side 4 pairs of UVV lashing rings (10 t), swiveling and lowerable, loadable in all directions and recessed into the outer frame * Per side 3 stake pockets, each with a simultaneous 2 t lashing option ----Widening Kit: * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (except at the rear bevel) * Plank holders for extensions under the chassis, left side in longitudinal direction ----Excavator Arm Rest: * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4 t lashing points per side in the excavator arm rest ----Ramps: * Hydraulically operated, one-piece drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks on the ramps made of hardwood * Steel construction prepared for 6-function slider valve ----Loading Height: * Loaded edge (unladen) approx. 950 mm +/- 20 mm ----Tyres: * Tyres 235/75 R 17.5 ----Paintwork: * Chassis, turntable frame, folding outriggers, mechanical drop supports, ramps galvanized * --Axles, air tank, drawbar painted in black tone-- ----Info: * Vehicle has a temporary registration in 07/2024 due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Availability: * Immediately available from Egestorf

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lowering system and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as infotool, with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support legs at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder under chassis, right side ----Low Loader Platform: * Fifth wheel platform, front corners chamfered at 45°, with front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high drop-side aluminium side walls (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * 150 mm high rear wall slotted in place * Rear chamfer on the fifth wheel platform to the low-bed, approx. 700 mm long * Fifth wheel platform with 50 mm timber floorboards and low-bed platform with 60 mm timber floorboards * Checkered plate over the axles ----Widenings: * 8 x mechanical fold-out widenings to 3 meter overall width (except on the rear chamfer) (widening planks available, stored on the platform) * Mechanically adjustable warning panel sets front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform, 2 x 6.3 t lashing rings each side and three 5 t lashing bars on the outer frame * On the low-bed platform, each side 2 x 13.4 t lashing rings and 4 x 10 t swivel and lowerable lashing rings recessed into the outer frame * Each side 2 x 6.4 t lashing points and 1 lashing ring in the excavator stick recess at the rear * 2 x container locks directly after the gooseneck in the low-bed platform ----Excavator Stick Recess: * Excavator stick recess runs continuously from the end of the last fixed axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer-side retrofitting of hydraulic ramp shifting * The outer board on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-on bevel * Rubber on the ramp and drive-on bevel ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity over 40 l to 120 l/min) ----Loading Dimensions: * Fifth wheel loading platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm drive-on bevel) Gijdpfx Aqoy Ngzystou ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Painting/Finish: * Chassis, ramps, rear folding supports, widening brackets hot-dip galvanized * Axles, support winches, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images may show equipment not included in the offering ----Delivery time: * available from c

Durum: yeni, azami yük ağırlığı: 26.840 kg, toplam ağırlık: 33.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı hacmi: 25 m³, Üretim yılı: 2025, Brakes: - Wabco EBS-E / ABS (electronic braking system with RSS) - Emergency release device for spring brake actuators - Drum brakes 420 x 180 mm - Paver brake with shortened rear mudguards and manual paving switch Axles: - 2 x 9 t BPW axles - Lift axle with starting aid - Reinforced single-leaf torsion bar suspension Suspension: - Air suspension with automatic lowering during tipping (for increased stability, deactivatable for overhead pavers) Electrics / Lighting: - SmartBoard (raising and lowering, lowering of the lift axle, starting aid, odometer, axle load display, ECAS, fault memory readout) - 1 x 15-pin trailer socket - Eco-LED II lighting with protective cover - 1 x additional LED work light - Flashing side marker lights - Tire pressure monitoring system (TPMS) General Attachments: - Aluminium air tank - Telescopic steel landing legs with saucer foot (can only be uncoupled when unladen) - 4 m aluminium ladder stored on the right side above the mudguards - Enclosed plastic single mudguards - Foldable underride guard - Rear tow eye - Foldable access ladder front left side - Document box on front wall Chassis: - High chassis frame made of high-strength fine-grained steel Tipping Body: - Half-shell rear tipping steel body made of STEELECT 450 steel - HBW 450 - Front wall with 600 mm roof as bow tarpaulin support - Side walls with stable, continuous, inward-sloping top rail - Front and rear wall sloped Thickness of Floor, Side Walls, Front and Rear Wall: Gjdpfx Aew Eg Eqjqtjiu - Floor tailored 5 / 6 mm - Front wall 5 mm - Rear wall 5 mm - Side walls 5 mm Hydraulic Cylinder: - Front hydraulic cylinder with medium working pressure Hydraulic Tailgate: - Suspended hydraulic and pendulum rear wall - Control of the hydraulic rear wall via mechanical ball valve Tarpaulin: - Electric sliding tarpaulin - RAL 9006 white aluminium - with manual switch on chassis and radio remote control Fifth Wheel Height: - Unladen approx. 1,350 mm - Laden approx. 1,340 mm Loading Volume: - Approx. 25 m³ Paint: - Chassis painted in RAL 7021 black grey - Tipping body in RAL 9006 white aluminium General Information: - Subject to errors and prior sale - New vehicle with manufacturer warranty Delivery Time: - Available immediately from Egestorf

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box installed on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General attachments: * Side underrun protection * Landing legs at the front as well as mechanical swinging supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier under the chassis, right side ----Low loader platform: * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high foldable and removable aluminum side boards (RAL 9010 pure white) on the saddle platform * Rear wall -150 mm- inserted * Rear slope on the saddle platform to the low-bed, approx. 700 mm long * Saddle platform with 50 mm wooden floor boards and low-bed platform with 60 mm wooden floor boards * Chequer plate over the axles ----Extensions: * 8 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension boards available with storage on the saddle platform) * Mechanically adjustable warning panel sets front and rear ----Load securing (Lashing Package): * On the saddle platform, 2 x 6.3 t lashing rings each, as well as 3 x 5 t lashing bars on each side in the outer frame * On the low-bed platform, 2 x 13.4 t lashing rings per side, as well as 4 x 10 t lashing rings swiveling and retractable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side as well as 1 lashing ring at the rear in the excavator arm trough * 2 x container locks directly after the neck bend on the low-bed platform ----Excavator arm trough: * Excavator arm trough, continuous from the end of the last rigid axle through the steering axle up to the end crossmember, with internal reinforcement profiles, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Loading ramps: * Mechanically operated single-piece hot-dip galvanized hydraulic loading ramps approx. 3,000 x 720 mm (mechanically adjustable laterally) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer plank on the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the approach slope * Rubber on the ramp and the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump output from over 40 l/min up to 120 l/min) ----Loading dimensions: * Load area of the saddle platform: approx. 3,935 x 2,480 mm * Low-bed load area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension consoles are hot-dip galvanized Giodpfx Aqoy Ngz Hotsu * Axles, landing legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample pictures may contain equipment

Durum: yeni, azami yük ağırlığı: 27.760 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı hacmi: 25 m³, Üretim yılı: 2026, Brake system: * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes 420 x 180 mm * Paver brake with shortened rear mudguards and manual paver switch ----Axles: * 3 x 9 t BPW axles * First axle liftable with start-off aid ----Suspension: * Air suspension with automatic lowering during tipping (to improve stability; can be deactivated for overhead pavers) ----Electrics / Lighting: * Smart-Board (lifting and lowering system, axle lift lowering, start-off aid, odometer display, axle load display, ECAS, fault memory readout) * Tire Pressure Monitoring System (TPMS) * 1 x 15-pin trailer socket * Eco-LED II lighting with protective housing * 1 x additional LED work light * Flashing side marker lights ----General attachments: * Aluminum air tanks * Telescopic steel drop supports with plate foot (can only be uncoupled in unladen condition) * Enclosed individual plastic mudguards * 4 m aluminum access ladder mounted to the right side above the mudguards * Foldable underrun protection * Rear tow eye ----Chassis frame: * High chassis frame made of high-tensile fine-grained steel in heavy-duty design ----Tipping body: * Half shell steel rear tipper body made entirely of STEELECT 450 steel -HBW 450- * Side walls with robust all-round upper edge inclined inward * Access and aluminum standing platform outside in front of the front wall ----Thickness of floor, side walls, front and rear wall: * Front and rear wall inclined * Front and rear wall 5 mm * Side walls 6 mm * Floor 8 mm HBW 450 steel ----Hydraulic ram: * Front hydraulic ram with medium working pressure ----Hydraulic tailgate: Gijdpfx Aew Eg Edoqteu * Hydraulic and swinging tailgate * Hydraulic tailgate operated via mechanical ball valve ----Tarp: * Manual roll tarp -RAL 9006 white aluminum ----Load volume: * approx. 25 m³ ----Fifth wheel height: * Unladen approx. 1,340 mm * Laden approx. 1,330 mm ----Painting: * Chassis painted in RAL 7021 black grey * Tipping body in RAL 9006 white aluminum ----General information: * --Maximum technically permissible gross weight 39,000 kg-- * Subject to errors and prior sale * New vehicle with manufacturer warranty ----Delivery time: * Available from week 11/2026

Durum: ikinci el, azami yük ağırlığı: 27.000 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2015, bir sonraki muayene (TÜV): 05/2026, toplam genişlik: 2.550 mm, Donanım: ABS, Alman dorse 1. el Yürüyen taban (walking floor) Dorsenin üzerinde hidrolik koruma brandası Hidrolik arka kapak Kaldırma dingili Giedpfoym Hypsx Aqtou

Durum: yeni, azami yük ağırlığı: 37.619 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.240 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.570 mm, Üretim yılı: 2025, Donanım: ABS, Kässbohrer K.SLS 3 / 0N ? 18/30 | Year of manufacture: 2025 | NEW | 40-t ramps | Premium specification Gsdpfx Ajx Efzujqteiu Location: Germany Condition: New / unused Availability: Immediate Description For sale: brand-new Kässbohrer K.SLS 3 / 0N ? 18/30 low loader, year 2025. Ideal for transporting construction machinery, equipment, and heavy goods. Robust chassis, high-quality axles, heavy-duty ramps – immediately ready for use. Technical Data Dimensions Total length: 13,190 mm * Platform length: 9,240 mm * Platform height: 875 mm * Total width: 2,550 mm (+600 mm with side extensions) * Gooseneck length: 3,950 mm * Unladen weight: approx. 10,381 kg Weights Perm. gross weight 80 km/h: 48,000 kg * Perm. gross weight 60 km/h: 52,800 kg * Total axle load: 30,000 kg * King pin load: up to 18,000 kg Chassis & Axles 3 BPW axles, air suspension, drum brakes * 1 trailing axle at the rear * Lift axle (load-dependent + automatic in-cab control) * Tyres: 245/70 R17.5, M+S + 3PMSF * Tyre pressure monitoring R141 * Wabco EBS 4S/3M, ABS + RSS * Wabco Smartboard (axle load, suspension, diagnostics etc.) Ramps & Loading Area Foldable 40-t loading ramps * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulic sliding system * 45-mm hardwood floor + chequer plate above wheel arches Load Securing Multiple 8,000 daN and 13,400 daN lashing points * 7×2 stake pockets + plug-in stakes * Container locks for 1×20 ft * Front wall 450 mm, side & rear walls in aluminium Body & Chassis High-tensile S700 MC steel * Partially metallized (Zn/Al 85/15) – enhanced corrosion protection * Rear angle: 10°, 500 mm * 2" king pin * Mechanical landing legs at front * 45-t supports at rear Equipment 2× toolboxes * All-round beacon * LED lighting * Rear work lights * Wheel chocks * Extensions 9×2 (up to +300 mm) * Stake box * Reflective marking on sides & rear Colour: RAL 3020 Traffic red For further information, please feel free to contact us.

Durum: yeni, azami yük ağırlığı: 36.937 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Kässbohrer Low Loader with Hydraulic Gooseneck Available Immediately! TECHNICAL DATA: * Saddle height: 1,250 mm * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Platform height: 875 mm * Wheelbase: 8,480 mm * Axle spacing: 1,360 mm * Axle load: 30,000 kg * BPW axles with air suspension and drum brakes, 10 ton capacity * Unladen weight: 11,063 kg * Overall width: 2,550 mm * Permissible total weight (60 km/h): 52,800 kg * Permissible total weight (80 km/h): 48,000 kg CHASSIS: * 2x fixed front axles, 1x rear self-steering axle * Overload-dependent manual axle lifting system on 1st axle * Tyres: 12 units, 245/70R17.5 * Air suspension, 1x load gauge Gijdpfow Nlzqox Aqteu FRAME: Made of high-quality, high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost landing legs at front * Foldable supports at rear * Grated floor RAMPS: * Ramp loading capacity: 40 tonnes * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations with galvanized steel surface, 4,200 mm length and 850 mm width, 9° ramp angle, 40,000 kg load capacity, 3,510 mm height in closed position * Hydraulic gooseneck ramp, 2,800 mm long, 10° angle LOAD SECURING: * Lashing rings: 6x2 on the gooseneck with 6 t capacity, 6x2 on the platform with 6 t capacity, 8x2 on the outer frame with 6 t capacity * 8x2 stake pockets OTHER FEATURES: * 1x beacon * 1x work lamp * 2x2 oversize marker boards with lighting * SmartBoard For further information, we are at your disposal.

Durum: yeni, azami yük ağırlığı: 36.937 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Kässbohrer Low Loader with Hydraulic Gooseneck Available Immediately! TECHNICAL DATA: * Saddle height: 1,250 mm * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Platform height: 875 mm * Wheelbase: 8,480 mm * Axle spacing: 1,360 mm * Axle load: 30,000 kg * BPW axles with air suspension and drum brakes, 10 ton capacity * Unladen weight: 11,063 kg * Overall width: 2,550 mm * Permissible total weight (60 km/h): 52,800 kg * Permissible total weight (80 km/h): 48,000 kg CHASSIS: * 2x fixed front axles, 1x rear self-steering axle * Overload-dependent manual axle lifting system on 1st axle * Tyres: 12 units, 245/70R17.5 * Air suspension, 1x load gauge FRAME: Made of high-quality, high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost landing legs at front * Foldable supports at rear * Grated floor RAMPS: * Ramp loading capacity: 40 tonnes * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations with galvanized steel surface, 4,200 mm length and 850 mm width, 9° ramp angle, 40,000 kg load capacity, 3,510 mm height in closed position * Hydraulic gooseneck ramp, 2,800 mm long, 10° angle Godpeyhi H Isfx Aqtoiu LOAD SECURING: * Lashing rings: 6x2 on the gooseneck with 6 t capacity, 6x2 on the platform with 6 t capacity, 8x2 on the outer frame with 6 t capacity * 8x2 stake pockets OTHER FEATURES: * 1x beacon * 1x work lamp * 2x2 oversize marker boards with lighting * SmartBoard For further information, we are at your disposal.

Durum: yeni, azami yük ağırlığı: 36.937 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Kässbohrer Low Loader with Hydraulic Gooseneck Immediately Available! TECHNICAL DATA: * Fifth Wheel Height: 1,250 mm * Total Length: 13,190 mm * Gooseneck Length: 3,950 mm * Platform Length: 9,240 mm * Platform Height: 875 mm * Wheelbase: 8,480 mm Gedpot Aqv Sofx Aqtsiu * Axle Spacing: 1,360 mm * Axle Load: 30,000 kg * BPW axles with air suspension and drum brakes, 10-ton payload * Unladen Weight: 11,063 kg * Overall Width: 2,550 mm * Permissible Gross Vehicle Weight (60 km/h): 52,800 kg * Permissible Gross Vehicle Weight (80 km/h): 48,000 kg CHASSIS: * 2x fixed front axles, 1x self-steering trailing rear axle * Overload-dependent manual axle lift system on the first axle * 12x 245/70R17.5 tyres * Air suspension, 1x load gauge FRAME: Made of high-quality, high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost landing gears at the front * Foldable supports at the rear * Grated steel platform floor RAMP: * Ramp load capacity: 40 tonnes * 2x hydraulic ramps, suitable for hydraulic sliding/folding operation, galvanized steel surface, 4,200 mm long and 850 mm wide, 9° ramp angle, load capacity 40,000 kg and closed height 3,510 mm * Hydraulic gooseneck ramp, 2,800 mm long, 10° angle LOAD SECURING: * Lashing rings 6x2 on the gooseneck with 6-ton capacity, 6x2 on the platform with 6-ton capacity, 8x2 on the outer frame with 6-ton capacity * 8x2 stake pockets OTHER: * 1x rotating beacon * 1x work light * 2x2 oversize marker boards with lighting * SmartBoard For further information, please do not hesitate to contact us.

Durum: yeni, azami yük ağırlığı: 36.937 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Kässbohrer Low Loader with Hydraulic Gooseneck Available Immediately! TECHNICAL DATA: * Saddle height: 1,250 mm * Overall length: 13,190 mm * Gooseneck length: 3,950 mm Gijdpewmh H Eefx Aqteu * Platform length: 9,240 mm * Platform height: 875 mm * Wheelbase: 8,480 mm * Axle spacing: 1,360 mm * Axle load: 30,000 kg * BPW axles with air suspension and drum brakes, 10 ton capacity * Unladen weight: 11,063 kg * Overall width: 2,550 mm * Permissible total weight (60 km/h): 52,800 kg * Permissible total weight (80 km/h): 48,000 kg CHASSIS: * 2x fixed front axles, 1x rear self-steering axle * Overload-dependent manual axle lifting system on 1st axle * Tyres: 12 units, 245/70R17.5 * Air suspension, 1x load gauge FRAME: Made of high-quality, high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost landing legs at front * Foldable supports at rear * Grated floor RAMPS: * Ramp loading capacity: 40 tonnes * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations with galvanized steel surface, 4,200 mm length and 850 mm width, 9° ramp angle, 40,000 kg load capacity, 3,510 mm height in closed position * Hydraulic gooseneck ramp, 2,800 mm long, 10° angle LOAD SECURING: * Lashing rings: 6x2 on the gooseneck with 6 t capacity, 6x2 on the platform with 6 t capacity, 8x2 on the outer frame with 6 t capacity * 8x2 stake pockets OTHER FEATURES: * 1x beacon * 1x work lamp * 2x2 oversize marker boards with lighting * SmartBoard For further information, we are at your disposal.

Durum: yeni, azami yük ağırlığı: 36.937 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Kässbohrer Low Loader with Hydraulic Gooseneck Immediately Available! TECHNICAL DATA: * Coupling height: 1,250 mm * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Platform height: 875 mm * Wheelbase: 8,480 mm * Axle spacing: 1,360 mm * Axle load: 30,000 kg * BPW axles with air suspension and drum brakes, 10 ton load capacity * Unladen weight: 11,063 kg * Overall width: 2,550 mm * Permissible gross weight (60 km/h): 52,800 kg * Permissible gross weight (80 km/h): 48,000 kg CHASSIS: Godsw Ii A Ajpfx Aqtoiu * 2x rigid front axles, 1x rear trailing steering axle * Manually operated axle lift system on the 1st axle, load-dependent * Tyres: 12x 245/70R17.5 * Air suspension, 1x load gauge FRAME: Made of high-quality, high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost landing legs at the front * Foldable supports at the rear * Grating floor RAMP: * Ramp load capacity: 40 tonnes * 2x hydraulic ramps, suitable for hydraulic sliding/folding operation with galvanized steel surface, 4,200 mm long and 850 mm wide, 9° ramp angle, load capacity 40,000 kg and 3,510 mm height when closed * Hydraulic gooseneck ramp, 2,800 mm long, 10° angle LOAD SECURING: * Lashing rings: 6x2 on the gooseneck with 6 tonne capacity, 6x2 on the platform with 6 tonne capacity, 8x2 on the outer frame with 6 tonne capacity * 8x2 stake pockets OTHER FEATURES: * 1x rotating beacon * 1x work light * 2x2 oversize load signs with lighting * SmartBoard Please do not hesitate to contact us for further information.

Durum: yeni, Üretim yılı: 2026, renk: gri, toplam ağırlık: 16.000 kg, boş ağırlık: 1.890 kg, yükleme alanı genişliği: 2.480 mm, yükleme alanı uzunluğu: 7.330 mm, Değiştirilebilir platform, inşaat malzemesi versiyonu, BDF sistemi, 7.450 mm uzunluğunda, arka kapaklı inşaat malzemeleri değişim platformu, BDF sistemi, 7.450 mm uzunluğunda. Yan paneller, ön duvar ve arka kapak ile birlikte. Şasi, köşe direkleri ve destek ayakları metalden olup, KTL sistemi ile korozyon korumalıdır. Destek ayakları ve değişim şasisi ayrıca RAL 9005 siyaha boyanmıştır. Destek ayakları 1.020 ila 1.320 mm arasında teleskopik olarak ayarlanabilir. Giedpfxjyxrzqs Aqteu Taban plakası 30 mm kalınlığında, taban yük kapasitesi DIN EN 283'e göre test dingil yükü 5.460 kg. VarioFix çelik delikli dış şasi, esnek sabitleme için; dış şaside gömülü 9 çift sabitleme halkası. Kıskaçlı vinçler için bağlantı yerleri mevcut. Bulunduğu yer: Ulm, birden fazla mevcut. Yerinde fiyat Lippstadt: 10.700 EUR net + KDV. Belirtilen tüm değerler yaklaşık olup mm ve kg cinsindendir. Teklif bağlayıcı değildir. Ön satış hakkı saklıdır. Daha fazla ürünü ... adresinde bulabilirsiniz.

Durum: yeni, Üretim yılı: 2026, renk: gri, toplam ağırlık: 16.000 kg, boş ağırlık: 1.890 kg, yükleme alanı genişliği: 2.480 mm, Drop-side body in construction material version, BDF system, 7,450 mm long, with tailgate construction material swap body, BDF system, 7,450 mm long. Equipped with side walls, front wall, and tailgate. Frame, corner stanchions, and support legs in galvanized design, anodized side walls 800 mm high with recessed opening handles, 30 mm thick wooden floor, floor load capacity according to DIN EN 283 with a test axle load of 5,460 kg. Giedpfx Aqsuzlxgotsu Support legs galvanized and telescopic, suitable for drop-off heights from 1,120 to 1,320 mm. VarioFix steel perforated outer frame for flexible load securing, 9 pairs of lashing rings recessed into the outer frame. Provisions for grab tongs. All specified figures are approximate measurements in mm and kg. Offer is subject to change. Prior sale reserved. Prices net ex location D-59558 Lippstadt-Rixbeck. You can find more items at . .

Durum: yeni, Üretim yılı: 2025, renk: turuncu, toplam ağırlık: 15.000 kg, yükleme alanı hacmi: 10 m³, yükleme alanı genişliği: 2.300 mm, yükleme alanı uzunluğu: 6.000 mm, yükleme alanı yüksekliği: 750 mm, - 1 x Available in RAL 2001 (Deep Orange) * Mounting brackets for hooklift systems according to DIN 30722-1 (15,000 kg) with rear steel external rollers and subframe made of INP 180 * External rollers are greaseable and replaceable * Lifting bracket Ø 50 mm * Hook height 1,570 mm * Transition from subframe to front wall beam reinforced with 10 mm knee plates * Floor trough made of 5 mm St 37.2 (S235JR) steel * Side walls made of 3 mm St 37.2 (S235JR) steel * Rounded transition between floor and side wall * End profile made of stable round tube Ø 90 mm * Frame spacing 750 mm * Frame profile U 80 x 50 mm Godow U Sx Topfx Aqtsiu * Double-wing rear door with Dutch lock and side safety central locking as per UVV, including container door opening aid * Continuous hooks for tarpaulin and net attachment * Galvanized safety ladder at the front end according to UVV * Container primed once inside, double primed outside, and double-coated on the exterior in a single colour * UVV safety labels * Container inspected and certified according to UVV (formerly BGR 186) * Paint finish: RAL 2011 (Deep Orange) * Subject to errors and prior sale * Immediately available from Egestorf on the A7

Durum: yeni, azami yük ağırlığı: 30.310 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, NEW VEHICLE Fliegl 4-axle low loader with 2 pairs of wheel recesses and ramps Total weight: 40,000 kg Payload: 30,310 kg Unladen weight: 9,690 kg Overall length: 12,000 mm Loading length: 10,000 mm Load bed: 7,150 mm including 850 mm drive-up slope Loading height: 900 mm 1st pair of wheel recesses after drop in the load bed, length at bottom approx. 1,600 mm, 400 mm deep 2nd pair of wheel recesses between the axles in the load bed, length at bottom 600 mm, 300 mm deep Extensions to 3,000 mm, warning signs, beacon, Comprehensive lashing package 5 pairs of stake pockets in the outer frame Excavator boom recess 1,800 mm long, 150 mm deep Drawbar 50 mm Giedpfonzlg Djx Aqteu Air suspension with lifting and lowering valve, can be operated separately BPW drum brakes Tyres: 235 / 75 R 17.5" Axle load detection via EBS CAN bus signal, Trailer Info Center Ramps 2,800 mm x 750 mm with hydraulic operation Hydraulic lateral shifting Hire-purchase offer: 48-month term, residual value 40%, down payment only VAT on the rental instalments, monthly instalment EUR 970.00 net Vehicle available from 11/09/2023 from the Neumünster trade fair. Visit us at Nordbau - Stand West 121, right next to the main entrance. Other 3-, 4- and 5-axle low loaders new and used available immediately.

Durum: yeni, Üretim yılı: 2026, renk: siyah, toplam ağırlık: 15.000 kg, yükleme alanı uzunluğu: 6.000 mm, IMMEDIATELY AVAILABLE – PRICE PER UNIT 2 pieces roll-off subframe according to DIN 30722-1 with twist-lock fasteners for 20-foot containers Godpfx Asyh Nbpjqteiu Type U 09 s Internal dimensions: approx. 6.0 meters (all dimensions are approximate) Paintwork: RAL 9005 (jet black) Mounting brackets for hook systems according to DIN 30722-1 (15,000 kg) with rear-mounted steel external rollers and a subframe made from INP 180 External rollers can be greased and replaced Mounting bracket Ø 50 mm, hook height 1,570 mm Transition from subframe to front wall beam reinforced with 10 mm angle plates 4 twist-lock fasteners for 20-foot ISO containers according to DIN 15190 Subframe double primered and double lacquered Offer subject to change, without warranty or guarantee. Prior sale reserved. Purchase is only concluded upon receipt of payment. The vehicle remains our property until full payment is received. We only accept payments in euros without additional costs for the seller and only by bank transfer or cash payment. No checks. Price per unit.

Durum: ikinci el, azami yük ağırlığı: 27.300 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2013, bir sonraki muayene (TÜV): 08/2026, yükleme alanı uzunluğu: 11.700 mm, yükleme alanı genişliği: 3.000 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.700 mm, Donanım: ABS, * Gooseneck with storage boxes * Self-steering axles * Hydraulic loading ramps * Widenable lowbed ----* Tire size: 235/75R17.5 * Gross vehicle weight: 42,000 kg * Curb weight: 8,700 kg * Overall length: 13,150 mm Gisdpfxeza Rlis Aqtou * Next safety inspection due: 02/2027 ----Vehicle number: 12148----Errors and prior sale excepted----Advertising and various stickers have been digitally removed.-----We are happy to assist you with all formalities involved in the purchase of a vehicle—simply let us know your requirements and suggestions, and we will take care of the rest. Among other services, we can offer you the following for an additional charge:----Trade-in of your old vehicle TÜV/safety inspection Complete export processing Financing arrangements Application for export license plates Vehicle transfer Vehicle registration Recovery and vehicle transport---- Your VTS Team

Durum: ikinci el, kilometre: 407.322 km, güç: 353 kW (479,95 bg), ilk tescil: 05/2016, yakıt türü: dizel, boş ağırlık: 16.220 kg, toplam ağırlık: 32.000 kg, lastik boyutu: 385/65 R22,5 - 315/80 R22,5, dingil konfigürasyonu: 8x6, dingil mesafesi: 4.800 mm, enerji verimliliği: A, renk: sarı, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: çelik, yükleme alanı hacmi: 16 m³, Donanım: ABS, AdBlue, EBS (Elektronik Fren Sistemi), diferansiyel kilidi, ek farlar, hız sabitleyici, navigasyon sistemi, park ısıtıcısı, çekiş kontrolü, Üre deposu (AdBlue) Motor hacmi 12.419 cc Dört tekerlekten çekiş Gsdpfx Aoy Eqvqoqtoiu Hidrolik (yardımcı tahrik) Düşük gürültü seviyesi Euro 6 A Faydalı yük 15.780 kg EVB Otomatik klima Meiller çelik dairesel damper Hidrolik arka kapak Katlanabilir alt koruma Güneşlik Basınçlı hava kornaları Havalı süspansiyonlu sürücü kabini Yukarıya egzoz çıkışı Ön aks diferansiyel kilidi Hatalar olabilir.

Durum: yeni, boş ağırlık: 15.420 kg, azami yük ağırlığı: 61.080 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear bevel approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Load area: Giodpfx Aqol Sl Izsteu Extendable load area with rear bevel approx. 500 mm x 8° 8 pairs of outward folding lashing rings 1 pair of flat-fitted lashing rings at the front of the load area Recesses in the outer frame of the loading area for attaching tie-down straps Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Two-piece steel ramps: One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramp sections hydraulically lift and fold, hydraulically height-adjustable, and hydraulically shiftable. Maximum load per pair: 50,000 kg. Landing legs: • JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tires: BPW axles and suspension, 4th and 5th axles steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lockout, activated via reverse gear and manually Tires 235/75 R 17.5 3PMSF Braking system: Braking system according to EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connector rail with sockets 24N, 24S & 15 pin Connection compliant with ISO: 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer High-quality 2-component (2K) topcoat, single color MB 7350 Novagrau Rear part metalized and painted in RAL 9010 (pure white) No metallic paint possible Steel construction: Steel construction made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Accessories: One spare wheel with holder in front of bulkhead 2" kingpin One galvanized steel front wall, approx. 400 mm high Yellow-red air couplings mounted on the galvanized connector rail at the front 2 wheel chocks with holder on the front wall Bracket at rear of gooseneck for ALU drive-on ramps One holder for a rotating beacon at the rear of the trailer Galvanized supports beneath the rear bevel of the loading area White reflector tape according to EU regulations on the sides, extension, and rear in red Electro-hydraulic unit at rear under the loading area Mounts for warning signs with socket at the gooseneck and rear plate left and right Ramp control valves fitted to right-hand side of the trailer One mud flap at the rear of the trailer Manual and documentation on USB stick 3.5" kingpin supplied loose Plug-in ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm (LxH) Rear galvanized drop-in stakes are removable (structure length approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or 40' container 6 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle with control via TEBS E, depending on the current axle load and current loading condition Square cleats 20 x 20 mm every 200 mm on the outer frame of the loading area's bevel On the checker plates, above the kingpin and the loa...

Durum: ikinci el, boş ağırlık: 10.900 kg, azami yük ağırlığı: 43.600 kg, toplam ağırlık: 54.500 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/2025, yükleme alanı uzunluğu: 8.700 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 855 mm, lastik boyutu: 245/70 r17.5, renk: gri, Üretim yılı: 2025, işletme ağırlığı: 10.900 kg, Donanım: ABS, Gooseneck, rigid, central tube design: - Enclosed outer frame with cut-outs for lashing straps (LC 1,500 daN) - Steel floor covering with anti-slip coating - Including perforated rail for aluminium approach ramps - 2" king pin - Mechanically operated BPW landing legs - 550 mm long, 8° incline at the gooseneck end - Front wall including storage position for rear wall, 400 mm high - Spare wheel holder mounted upright at the front of the gooseneck - 3 pairs of recessed lashing rings LC 5,000 daN in the loading area of the gooseneck - Aluminium drop-in side walls, 400 mm high, consisting of 2x side walls (3,150 mm length) and rear wall with stanchions (galvanised) - Storage box rectangular, aluminium, folding lid, lockable, approx. 400 x 800 mm, centre - Storage box 45’, aluminium, folding lid, lockable, approx. 400 x 800 mm, left - Storage box 45’, aluminium, folding lid, lockable, approx. 400 x 800 mm, right Loading platform, single extendable: - Enclosed outer frame with cut-outs for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Sheet metal floor covering with anti-slip coating - Angled interface between fixed section and loading platform for bridging rails and wheel recesses - Excavator recess including longitudinal slots for cargo securing (LC 1,500 daN), approx. 3,850 mm length - Preparation for hydraulic ramp (electrical supply) - Outriggers for widening to 3,000 mm - Angled vehicle rear, 8°, 550 mm long Gisdoi Ai E Rjpfx Aqtju - Sled design for easy installation and removal of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally located on loading platform behind gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally at the rear of the loading platform - 1 pair of stanchion pocket rails approx. in the centre of the loading platform - 1 pair of stanchion pocket rails on the fixed section - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic split folding ramps, 2,750+1,500x800 mm - Larch wood covering - Remote control operation (wired and wireless options) - Ramps with quick-change (dismantling) system Chassis: - Axle make: BPW ECO Max - 2 ride heights - 4 axles at 10 t each (technically 12 t) - Twin tyres 245/70 R17.5 - 2 x rigid axle and 2 x friction-steered axle - Reverse steering lock for friction-steered axle by engaging reverse gear - Brake system: Knorr brand (according to EU regulations with EBS-E) - TIM G2 from Knorr (Trailer Information Module) - RSS (Roll Stability Support) - Load-dependent lift axle on the first axle including starting aid (forced lowering of the lift axle via TIM possible) Accessories: - 4 wheel chocks with holders - 2 pairs of warning boards 423 mm x 423 mm, with 2 position lights and socket for beacon, infinitely adjustable up to 3,950 mm - Lashing options at gooseneck and on loading platform (alternatively on ramp, if present) included - Removable splash plate at the end of the excavator recess - Electro-hydraulic unit for ramp operation - Wireless remote control for ramp operation - Hydraulic support legs at vehicle rear for support during loading - 1 pair additional reversing lights at rear, activated with reverse gear - Wooden broadening planks – larch (option)

Durum: yeni, azami yük ağırlığı: 390 kg, toplam ağırlık: 750 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 204 mm, yükleme alanı genişliği: 115 mm, yükleme alanı yüksekliği: 180 mm, toplam genişlik: 170 mm, toplam yükseklik: 235 mm, Box trailer F7520D unbraked with rear tailgate, 180 cm internal height Please use code 0506 for inquiries. Technical specifications: Gsdpfxjwil D He Aqtsiu * Gross vehicle weight: 750 kg * Payload approx. 400 kg * Internal dimensions (LxWxH): 204 cm x 115 cm x 180 cm * External dimensions (LxWxH): 326 cm x 170 cm x 235 cm * Loading height: 53 cm * Floor: multiplex wooden floor * Lashing points: 2 per side * Frame: welded steel frame, fully dip galvanized * Tyres: 165/70R13 * Axle manufacturer: AL-KO or KNOTT * Number of axles: 1 * Unbraked axle * Jockey wheel included as standard * Door loading width: 110 cm, height: 175 cm * Rear tailgate with rotary bar lock, lockable * Sidewalls: multi-layer glued wood, white * Lashing rails: 1 per side * Sidewall vents: 1 per side * 7-pin plug, 12V * Rear supports * Wheel chocks: 2 * Suspension chassis + 100 km/h road approval plus vehicle registration document/COC certificate: €39.00 All prices incl. VAT. Please contact us before viewing, as this vehicle may already be sold, despite our large on-site stock. By phone we can inform you if your desired trailer is available immediately – alternatively, we can order a new trailer to your specifications (dimensions, weight, equipment, etc.). Due to the large number of trailers in stock, occasional errors may occur – we kindly ask for your understanding. Specifications and prices are subject to error.

Durum: ikinci el, boş ağırlık: 7.000 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2016, yükleme alanı uzunluğu: 7.650 mm, yükleme alanı genişliği: 2.330 mm, yükleme alanı yüksekliği: 1.470 mm, yükleme alanı hacmi: 25 m³, lastik boyutu: 385/65 R22,5, dingil mesafesi: 1.310 mm, renk: yeşil, Donanım: ABS, Drum brake EBS Giodpewhffnjfx Aqtju Payload 32,000 kg Air suspension with lift axle Floor 8 mm – Side walls 6 mm SAF axles Alcoa aluminium rims Sliding tarpaulin Access platform Folding underrun protection Hydraulic tailgate with pendulum function Subject to errors and alterations

Durum: ikinci el, Üretim yılı: 2005, Derin kazı kovası. Bağlantı: Verachtert CW 20-30-40. Genişlik yaklaşık 400 mm, hidrolik iticili. Giodpfxex Evrmo Aqtou = Daha fazla bilgi = Kullanım amacı: İnşaat Daha fazla bilgi için Jan-Marc Schwickert ile iletişime geçin.

Durum: yeni, Üretim yılı: 2026, Brand-new roll-off container with side walls Giodpfewx Tr Dex Aqteu For further information, we are at your disposal.