Kullanılmış Broshuis Semi Tieflader 5 Achser Saf Teleskop - Nr.: 036 satın al (43.422)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Nürnberg
2.232 km
İnşaat makineleri için alçak yükleyici römorklar
Humbaur5-ACHS-TIEFLADER HTD 50 V49 Basic Plus
Çağrı
Koşul: yeni, boş ağırlık: 10.650 kg, azami yük ağırlığı: 39.350 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.830 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 r17,5 zoll, Üretim yılı: 2026, Donanım: ABS, merkez döner tabla, 5-AXLE SWING BOGIE LOWBED TRAILER, HOT-DIP GALVANIZED
=> FULL AIR SUSPENSION
=> HOT-DIP GALVANIZED
IN TOP CONFIGURATION!!!!
* AS LIFT AXLE
* AS SELF-STEERING FOLLOWING AXLE
• SAF – LOWBED AXLES
• AIR SUSPENSION
• ONE-PIECE LONG LOADING RAMPS
• HYDRAULIC RAMP LIFTER
• HYDRAULIC REAR SUPPORTS
• HYDRAULIC SIDE SHIFTING
• HYDRAULIC SYSTEM UP TO 150 LITERS/MINUTE
• EXCAVATOR ARM TROUGH
• CHASSIS AND BOGIE FRAME HOT-DIP GALVANIZED
• OUTER FRAME ADDITIONALLY PAINTED IN RED
• LOADING RAMPS HOT-DIP GALVANIZED
• 10 t RECESSED LASHING POINTS IN LOADING PLATFORM
• 3 t LASHING POINTS IN OUTER FRAME (High Deck)
• 6 t LASHING POINTS IN OUTER FRAME (Lowbed)
• 4 pairs of 3 t lashing points in outer frame (Lowbed)
• LASHING POINTS IN EXCAVATOR ARM TROUGH
• 3-METER WIDENING PACKAGE
• FOLD-OUT EXTENSIONS
• WOODEN PLANKS IN STEEL BOX UNDER LOADING PLATFORM
• SECOND STEEL STORAGE BOX UNDER LOADING PLATFORM
• WARNING SIGNS
• REAR BEACON LIGHT
• REAR STEPS
• 2 STORAGE BOXES IN HIGH DECK
• DIGITAL AXLE LOAD DISPLAY
• WABCO SMARTBOARD
• AIR SUSPENSION
• LIFT-AND-LOWER VALVE AT REAR (REAR LOWERING FOR LOADING AND UNLOADING)
• STAKE POCKETS IN OUTER FRAME
• TWO STAKE POCKETS INCLUDING DROP-IN STAKES AT FRONT END
• EBS - ELECTRONIC BRAKING SYSTEM
Ijdpfohmm Rcex Ab Toat
B-DIMENSION = approx. 11,790 MM
=> Freight cost for delivery: €2.90 plus VAT per km
=> Prices ex D-86368 Gersthofen
Your direct contact:
Mr. Hirn, Tel.
DOLL Fahrzeugbau
*Subject to prior sale and changes!*
*Price valid ex D-86368 Gersthofen*
*Sale only to business customers!*
*Images may deviate and are for general guidance only – may include/show accessories for extra charge*
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 5-Achs-Tele-Semi-nachlaufg.
Çağrı
Koşul: yeni, boş ağırlık: 14.800 kg, azami yük ağırlığı: 61.700 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck:
• Gooseneck with rear bevel approx. 750 mm x 10°
• 3 pairs of lashing rings
• 30 mm thick hardwood flooring
Iajdpfx Ajma Hf Rob Tot
Loading platform:
• Extendable loading platform with rear bevel approx. 500 mm x 8°
• 9 pairs of outwards folding lashing rings
• 1 pair of flat lashing rings at the front of the loading platform
• Cut-outs in the outer frame for attaching tension belts
• Approx. 48 mm thick hardwood flooring, checker plate covering above axles
Landing gear:
• JOST mechanical landing legs with 2-speed gearbox, lifting capacity 24 t (test load 50 t)
Axles and tyres:
• BPW axles and suspension, 1st axle steering, 2nd and 3rd fixed, 4th and 5th trailing axles
• Technical axle load: 12,000 kg
• 1st, 4th and 5th axle with electro-magnetic reverse lock, activated via reverse gear and manually
• Tyres 235/75 R 17.5 3PMSF
Braking system:
• WABCO brake system in accordance with EU regulations, incl. EBS-E (4S3M)
Paintwork:
• First class and long-lasting corrosion protection of the standard-shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer
• High-quality 2-component top coat, single colour MB 7350 Novagrau
• Rear section metallised and painted RAL 9010 (pure white)
Steel construction:
• Fabricated from high-tensile fine-grained steels
• Steel grades:
• S355J2+N/S355MC (yield strength 355MPa)
• S690QL/S700MC (yield strength 690MPa)
Equipment:
• One spare wheel with holder in front of the bulkhead
• 2" kingpin
• Galvanised steel front bulkhead approx. 400 mm high
• Yellow-red air couplings on galvanised connection strip at the front
• 2 wheel chocks with holder mounted to the bulkhead
• Provision at rear of gooseneck for ALU loading ramps
• Galvanised extendable deck wideners, approx. 230 mm per side
• Bracket for beacon at the rear of the trailer
• Galvanised supports under the rear bevel of the loading platform
• White reflective tape to EU regulations on sides, extension; red at the rear
• Mounting hardware for warning signs with socket at gooseneck and rear, left and right
• Detachable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm
• Removable rear galvanised stanchions (body length approx. 2,560 mm)
• 3 pairs of WADER container locks in platform for 20ft (30ft) or 40ft container
• 7 pairs of stanchion pockets for 100 x 50 mm stanchions in outer frame
• Lift axle on front axle with TEBS E control, responsive to axle load and load status
• Adjustable mounting rails for ALU loading ramps at rear
• 20 x 20 mm square climbing strips every 200 mm on outer frame of the platform bevel
• BEKAMAX (Pico) central lubrication system with NLGI-2 grease, removable pump protection
• 4 extendable warning signs approx. 423 x 423 mm with position light, extend by approx. 400 mm
• Mounting for beacon on warning signs
• European reflective plates (red-yellow) at rear of trailer
• 80 km/h speed stickers on rear and both sides
• Load gauge to determine axle loads including load diagram
• HRM Metallisation (High Resistance Metallisation) of outer frame
• Complete steel structure shot-blasted; all defined visible areas finished with ZINACOR 850 (85% zinc – 15% aluminium) hot metallisation
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FAYMONVILLE5-Achs-Doppel-Tele-Semi-Sattelauflieger
Çağrı
Koşul: yeni, boş ağırlık: 15.450 kg, azami yük ağırlığı: 65.550 kg, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 21.900 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 925 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck:
Gooseneck in SNT design for optimised load platform length, approx. 3,700 mm long, rear section with incline approx. 1,000 mm x 10°. Technical fifth wheel load: 30,000 kg. Compatible with tractor units: 4x2, 6x2, and 6x4.
Loading Platform:
Double-extendable loading platform, approx. 8,800 mm long with rear incline approx. 500 mm x 10°. A central support beam features a welded-on support table approx. 300 mm wide, with elongated holes at the front and rear for optional bridging elements that can be hooked in and repositioned.
Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length.
Axles and Tyres:
BPW axles and suspension, first axle steered passively, all other axles with hydro-mechanical forced steering. The first axle is equipped with an electro-magnetic reverse lock, activated via reverse gear or manually. Technical axle load: 12,000 kg. Air suspension with lift and lower valve. Manufacturer at our discretion.
Iodpjrigw Rsfx Ab Tjat
Sockets and Lighting:
24-volt lighting system in accordance with EU regulations. ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets. Complete HRM metallisation. Entire steel construction shot-blasted, then hot-dip refined with ZINACOR 850.
Paint Finish:
6-step final treatment: Complete steel structure shot-blasted after welding. One coat of zinc-based primer, one coat of bonding primer. Final paint finish with two layers of single-colour 2-pack paint in DB 7350 Novagrey, followed by cavity sealing with special wax.
Accessories:
Plug-in steel front wall, approx. 400 mm high. Supply line connection bar to tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets. If your pin configuration differs from ISO standards, please notify us.
3 kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches. On the gooseneck, 1 pair of plug-in ALU side walls, approx. 400 mm high, anodised finish. 3.5" kingpin. Gooseneck guide plate for the fifth wheel, approx. 500 mm wide.
2 wheel chocks with mounting bracket in front of the front wall. Mechanical landing legs with 2-speed gearbox and crank. Control valves for hydraulic ramps on the right side of the vehicle.
1 pair of mechanical rear supports. Central lubrication system with 1 pump (BEKAMAX brand) using normal grease (NLGI-2 standard).
Removable protection for the central lubrication pump(s). Remote axle steering from the front and rear by cable remote control using push-buttons, with single-track control, without installation in the tractor unit.
Under the gooseneck and at the rear end cross-member, left and right, one 7-pin socket with bracket for warning boards. One 7-pin socket at the rear end cross-member. Operating manual and documentation included.
One one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm, straight version.
Please note that special equipment and accessories will usually increase the unladen weight and accordingly reduce the payload capacity.
Warning package: 4 warning boards, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and mounting brackets for beacon.
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
FaymonvilleMAX Trailer 5-Achs-Tele-Semi mit hydr. Rampen
Çağrı
Koşul: yeni, boş ağırlık: 15.420 kg, azami yük ağırlığı: 61.080 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck:
Gooseneck with rear bevel approx. 750 mm x 10°
3 pairs of lashing rings
30 mm thick hardwood flooring
Load area:
Extendable load area with rear bevel approx. 500 mm x 8°
8 pairs of outward folding lashing rings
1 pair of flat-fitted lashing rings at the front of the load area
Recesses in the outer frame of the loading area for attaching tie-down straps
Approx. 48 mm thick hardwood flooring, checker plate covering above the axles
Two-piece steel ramps:
One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramp sections hydraulically lift and fold, hydraulically height-adjustable, and hydraulically shiftable. Maximum load per pair: 50,000 kg.
Landing legs:
• JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load)
Iasdpfx Ajl Sl Izeb Tot
Axles and tires:
BPW axles and suspension, 4th and 5th axles steering
Technical axle load: 12,000 kg
4th and 5th axles with electro-magnetic reverse lockout, activated via reverse gear and manually
Tires 235/75 R 17.5 3PMSF
Braking system:
Braking system according to EU regulations with EBS-E (4S3M)
Sockets and lighting:
Electrical system in accordance with EU regulations, lighting 24 volts
ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX at the front connector rail with sockets 24N, 24S & 15 pin
Connection compliant with ISO:
24N ISO-1185
24S ISO-3731
15 pin ISO-12098
Paintwork:
First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer
High-quality 2-component (2K) topcoat, single color MB 7350 Novagrau
Rear part metalized and painted in RAL 9010 (pure white)
No metallic paint possible
Steel construction:
Steel construction made of high-strength fine-grain steels
Steel grades:
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)
Accessories:
One spare wheel with holder in front of bulkhead
2" kingpin
One galvanized steel front wall, approx. 400 mm high
Yellow-red air couplings mounted on the galvanized connector rail at the front
2 wheel chocks with holder on the front wall
Bracket at rear of gooseneck for ALU drive-on ramps
One holder for a rotating beacon at the rear of the trailer
Galvanized supports beneath the rear bevel of the loading area
White reflector tape according to EU regulations on the sides, extension, and rear in red
Electro-hydraulic unit at rear under the loading area
Mounts for warning signs with socket at the gooseneck and rear plate left and right
Ramp control valves fitted to right-hand side of the trailer
One mud flap at the rear of the trailer
Manual and documentation on USB stick
3.5" kingpin supplied loose
Plug-in ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm (LxH)
Rear galvanized drop-in stakes are removable (structure length approx. 2,560 mm)
3 pairs of WADER container pockets in the loading area for a 20' (30') or 40' container
6 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area
Galvanized extensions, extendable by approx. 230 mm per side
Lifting axle on the front axle with control via TEBS E, depending on the current axle load and current loading condition
Square cleats 20 x 20 mm every 200 mm on the outer frame of the loading area's bevel
On the checker plates, above the kingpin and the loa...
Küçük ilan
Kirchberg
2.302 km
Alçak şasi dorse
Semi Trailer 19 AF 1-Achs Tieflader Plane
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 16.300 kg, toplam ağırlık: 22.000 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 08/2022, bir sonraki muayene (TÜV): 09/2026, BPW 10t axles, frame construction made of high-strength Domex 700, total loading area 11,800 mm, load bed length 8,350 mm, Knorr brake system EBS 4s/2k (ASR), rear folding support legs rated at 25,000 kg, pneumatic valve for adjustment of 4 wheel blockers, electric winch with remote control, 3x2 lashing rings integrated in the outer frame of the platform (8 t), aluminum frame L: 2,300 mm - W: 500 mm, hot-dip galvanized, toolbox, rolling platform bed, extendable bumper, ramp holder.
Iajdsih E Hyjpfx Ab Tet
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX110 Semi-Tieflader
Çağrı
Koşul: yeni, azami yük ağırlığı: 45.820 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Excerpt from the equipment. Full specifications available upon request.
Gooseneck:
* Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Loading platform, extendable design:
* Loading platform with extendable section and rear chamfer approx. 1,000 mm x 8°
* 5 pairs of outward folding lashing rings (LC 5,000 daN)
* 3 pairs of outward folding lashing rings (LC 10,000 daN)
Iaodpfsxbmpfex Ab Tjt
* 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN)
* Cutouts in the outer frame for attaching tension belts (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, checker plate over axles
Axles:
* BPW axles and suspension
* 1st axle rigid, all other axles hydro-mechanically forced steered
* Technical axle load: 12,000 kg per axle
* Air suspension with raise/lower valve
* Axle tools included
Tyres:
* Tyres 245/70 R 17.5 3PMSF, load index (146/146 F)
* Manufacturer at our discretion
* TPMS tyre pressure monitoring system according to ECE R 141
* Data transmission to tractor unit via standardised EBS interface per ISO 11992
* For correct display, the tractor unit must support transmitting and displaying these data
Landing legs:
* JOST landing legs (mechanical), 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
Brake system:
* Wabco brake system according to EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit
Paintwork:
* Complete steel structure shot-blasted automatically after welding
* Second blasting using corundum for optimum coating adhesion
* Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red as per RAL System 841GL
* Rims in silver-grey
* Rear section metalized and painted in RAL 9010 (pure white)
* Metallic paint not available
* Coating tested in salt spray test according to ISO 9227-NSS
* Cavities sealed with special wax
Steel structure:
* Steel construction made from high-strength fine-grain steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Electrical system:
* Electrical system according to EU regulations
* Lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with indicators
* ASPÖCK-UNIBOX located on the front connection strip, with 24N, 24S & 15-pin sockets according to ISO
* 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Including the following additional equipment:
* 2-inch kingpin
* Galvanized steel front wall, approx. 400 mm high
* Yellow-red air couplings on front galvanized connection strip
* Electro-hydraulic unit
* Forced steering front/rear via cable remote control (push buttons), with single-track control of the axles (no installation in the tractor unit)
* Galvanized folding supports under the rear chamfer of the platform
* 1 pair of recessed lashing rings along the rear central member in the chamfer (LC 10,000 daN)
* Plug-in aluminium side and rear walls on the gooseneck, approx. 2,440 x 400 mm (L x H)
* Rear galvanized plug-in stanchions removable (superstructure length approx. 2,560 mm)
* Galvanised toolbox integrated into the chamfered gooseneck
* 3 pairs of WADER container pockets in the platform for one 20' (30?) or
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader
Çağrı
Koşul: yeni, azami yük ağırlığı: 39.670 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website.
Summary of equipment. Full equipment details available upon request.
Gooseneck:
* Gooseneck with approx. 30 mm thick hardwood flooring
* Gooseneck at the rear, straight design
* 3 pairs of lashing rings (LC 5,000 daN)
Loading Area:
* Extendable loading area
* 5 pairs of fold-out lashing rings on the outside (LC 5,000 daN)
* 3 pairs of fold-out lashing rings on the outside (LC 10,000 daN)
* 1 pair of lying lashing rings at the front of the loading area (LC 10,000 daN)
* Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN)
* Approx. 48 mm thick hardwood flooring, diamond plate over the axles
Ijdpfx Absxarlvo Teat
Landing Legs:
JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles, two fixed and two self-steering axles
* Air suspension with lifting/lowering function
* Self-steering axles with electromagnetic reversing lock, can be activated via reverse gear or manually
* Drum brakes
* Axle tools
Tyres:
* 205/65 R 17.5
* Brand of our choice
* TPMS tyre pressure monitoring system according to ECE R 141
* Data transmission to the tractor via standardised EBS interface according to ISO 11992
* For correct display, the tractor unit must be able to transmit and display this data
Brake System:
* Brake system in compliance with EU regulations with EBS-E (4S3M), without connector lines to the tractor unit
Steel Construction:
* Steel structure made from high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Painting:
* Entire steel structure automatically shot-blasted after welding
* Secondary blast treatment with corundum for optimal coating adhesion
* HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection
* Final paint finish with 2 coats of 2K topcoat, single colour in RAL 3002 carmine red, according to RAL 841GL
* Rims in silver
* Rear section metallised and painted in RAL 9010 (pure white)
* Metallic paints not possible
* Paint system tested in salt spray test according to ISO 9227-NSS
* Sealing of cavities with special wax
Electrical System:
* Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting
* All LED side marker lights flash with the indicators
* ASPÖCK-UNIBOX on the front connection rail with 24N, 24S & 15-pin sockets; connections according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098)
Accessories included:
* 2-inch king pin
* One spare wheel holder in front of the bulkhead
* Yellow-red air couplings on the galvanised front connection rail
* Galvanised drop supports under the ramped section of the loading area
* One galvanised steel bulkhead (EN12642-XL), approx. 1,600 mm high
* Removable ALU side boards and rear gate approx. 2,440 x 400 mm (L x H) on the gooseneck
* Rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm)
* Support block with 1 pair of WADER container pockets; fifth wheel load approx. 20,000 kg
* 7 pairs of WADER container pockets for 1x 20' container in the loading area
* 1x 40' container in the loading area, 1x 40' container above the gooseneck, 2x 20' container
* 7 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area
* One galvanised crosswise holder under...
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Radmulden
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.360 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website.
Excerpt from the equipment list. Full equipment details available on request.
Gooseneck:
* Gooseneck with front chamfered corners approx. 45° and rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Loading Platform:
* Telescopic loading platform with rear chamfer approx. 1,000 mm x 8°
* 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D)
* Wheel recesses with square climbing strips approx. 15 x 15 mm as well as lower area widenings
* Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D)
* Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) – max. point load 5 t each
* Recess in the chamfer and protruding into the loading platform to accommodate an excavator bucket handle (approx. 2,900 x 750 x 210/290 mm – L x W x H)
* 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN)
* 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN)
* 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN)
* 2 pairs of lashing rings in the excavator bucket recess (LC 5,000 daN)
* Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN)
Two-part steel ramps:
* One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering
* Ramps with hydraulically foldable ramp sections and hydraulic lifting gear, hydraulically adjustable
* Maximum load per pair: 40,000 kg
Landing legs:
JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles and suspension, 2 fixed axles, 1 trailing steering axle
* Technical axle load: 12,000 kg each
* Electromagnetic reverse lockout via reverse gear and manual activation
* Air suspension with lift and lower valve
Tyres:
* Tyres 235/75 R 17.5 3PMSF – make at our discretion
TPMS:
Isdpfjyhkq Ujx Ab Toat
* TPMS Tyre Pressure Monitoring System according to ECE R 141
Brake system:
* WABCO brake system in accordance with EU regulations with EBS-E (2S2M)
Paintwork:
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure optimal corrosion protection
* Final coating with two layers of 2K topcoat, single-color in RAL 3002 Carmine Red, according to RAL System 841GL
* Rims in silver-grey
Incl. the following additional features:
* 2-inch kingpin
* One galvanized steel front wall, approx. 400 mm high
* 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN)
* Electro-hydraulic unit at the rear, under the loading platform
* On the gooseneck, plug-in aluminum side and rear panels, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Body length approx. 2,560 mm)
* One galvanized toolbox, integrated into the chamfered gooseneck
* 2 pairs of WADER container pockets in the loading platform for a 20' or 30' container
* 3 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform
* 3 pairs of additional removable, galvanized covers over the wheel recesses – max. point load 3.5 t each
* One removable galvanized intermediate table with 1 pair of WADER container pockets
* 1 additional hook-on intermediate table, ap
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Hebebett
Çağrı
Koşul: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Extract from the equipment details. Complete specification available upon request.
Gooseneck:
* Gooseneck with front corners chamfered approx. 45°, with rear bevel approx. 750 mm x 10°
* 3 pairs lashing rings (LC 5,000 daN)
* Hardwood flooring, approx. 30 mm thick
Iajdsyhkrrepfx Ab Tjt
Loading platform:
* Loading area aft of the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8°
* 6 pairs outward-folding lashing rings (LC 5,000 daN)
* 2 pairs outward-folding lashing rings (LC 10,000 daN)
* 1 pair inward-folding lashing rings at the central beam front (LC 10,000 daN)
* Cutouts in the external frame of the loading area for securing strap hooks (LC 2,000 daN)
* Grating floor covering C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), checker plate floor covering above the axles
Two-piece steel ramps:
* One pair galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm)
* Ramp with hydraulically foldable ramp sections
* Hydraulic lifting unit, hydraulically adjustable
* Maximum load capacity per pair: approx. 40,000 kg
Landing legs:
* JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles and suspension, 2 rigid axles, 1 trailing steered axle
* Technical axle load: 12,000 kg each
* Electromagnetic reverse lock, activated via reverse gear and manually
* Air suspension with lifting and lowering valve
Brake system:
* WABCO brake system according to EU regulations with EBS-E (2S2M)
Tyres:
Tyres 235/75 R 17.5 3PMSF – make at our discretion
TPMS:
* Tire Pressure Monitoring System (TPMS) according to ECE R 141
Paintwork:
* HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection
* Final coating with two layers of 2K top coat, single color in RAL 3002 Carmine Red in accordance with RAL System 841GL
* Wheels in silver grey
Accessories included:
* 2-inch kingpin
* One galvanized steel front wall, approx. 400 mm high
* Grating floor covering in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm)
* Grating floor covering in the loading platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm)
* Electro-hydraulic unit at the rear beneath the loading area
* On the gooseneck – plug-in aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stake pockets are removable (body length approx. 2,560 mm)
* One electric cable winch with remote control, approx. 5,400 kg pulling force, incl. wire rope approx. 9.5 mm thick, approx. 24 m long, with guide roller
* Bolted approx. 5t ring for winch cable insertion on the gooseneck without deflection roller
* One galvanized toolbox, integrated in the gooseneck bevel with an opening for a winch
* Grating floor covering on the gooseneck C30/3 (point load approx. 2t over an area of approx. 20 x 20 cm)
* 7 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the external frame of the loading area
* Lift axle on the front axle, controlled via TEBS E in accordance with current axle load and loading condition
* 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs at the r
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Hebebett
Çağrı
Koşul: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Extract from the equipment list. Full specifications available on request.
Gooseneck:
* Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick
Loading Platform:
* Platform behind the gooseneck hydraulically liftable and lowerable, approx. 2,800 mm long, with rear chamfer approx. 1,000 mm x 8°
* 6 pairs of fold-out lashing rings (LC 5,000 daN)
* 2 pairs of fold-out lashing rings (LC 10,000 daN)
* 1 pair of fold-in lashing rings on the central beam at the front (LC 10,000 daN)
* Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN)
* Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate
Two-piece Steel Ramps:
* One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm)
* Ramp with hydraulically folding and unfolding ramp sections. Hydraulic lifting, hydraulically adjustable
* Maximum load per pair: approx. 40,000 kg
Landing Gear:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles and suspension, 2 rigid axles, 1 self-steering axle
* Technical axle load: 12,000 kg each
* Electromagnetic reverse lock, activated via reverse gear and manually
* Air suspension with lift and lower valve
Brake System:
* WABCO braking system in accordance with EU regulations, with EBS-E (2S2M)
Iodpeyhkqzofx Ab Tsat
Tires:
* Tires 235/75 R 17.5 3PMSF – brand at our discretion
TPMS:
* TPMS tire pressure monitoring system in accordance with ECE R 141
Paintwork:
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) ensuring optimal corrosion protection
* Final paint with 2 layers of 2K top coat, single color in RAL 3002 carmine red, in accordance with RAL System 841GL
* Wheels in silver-gray
Accessories included:
* 2-inch kingpin
* Galvanized steel front wall approx. 400 mm high
* Grating surface in the gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm)
* Grating surface in the loading platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm)
* Painted sand layer as anti-slip on the checker plates above the kingpin and platform
* Electro-hydraulic unit at rear beneath the loading platform
* On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H). The rear galvanized stakes are removable. (Body length approx. 2,560 mm)
* Electric cable winch with radio remote control, lifting force approx. 5,400 kg, incl. approx. 9.5 mm thick wire cable, approx. 24 m long, with cable guiding roller
* Bolted approx. 5 t ring for redirecting the winch cable on the gooseneck without guide pulley
* One galvanized toolbox integrated in the chamfered gooseneck with an opening for a cable winch
* Grating surface on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm)
* 7 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, in the outer frame of the loading platform
* Lift axle on the front axle, controlled via TEBS E based on current axle load and loading status
* 7 pairs inst...
Küçük ilan
Hoogerheide
2.766 km
Düşük yükleyici
Goldhofer5-axle semi-lowbed trailer 80 t ext.
Çağrı
Koşul: ikinci el, makine/araç numarası: WG0STZL5990030302, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2012, toplam uzunluk: 12.900 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.650 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, renk: diğer, Üretim yılı: 2012, Chassis
Chassis height: 85 cm
King pin / fifth wheel diameter: 3.5 inch
King pin / drawbar height: 120 cm
Special transport
2-piece road plates: ✓
Hydraulic ramps: ✓
Loading platform length: 890 cm
Ramp length: 430 cm
Gooseneck length: 370 cm
Low-loader: ✓
Maximum width: 315 cm (30+30 cm)
Extendable: ✓
Telescopic: ✓
Tank
Fuel: ✓
= Further information =
Axle configuration
Tyre size: 245/70 R17.5
Axle brand: BPW Eco
Brakes: Drum brakes
Suspension: Air suspension
Axle 1: Twin tyres; lift axle; Tyre tread left outer: 50%; Tyre tread right outer: 30%
Axle 2: Twin tyres; steering; Tyre tread left outer: 40%; Tyre tread right outer: 75%
Axle 3: Twin tyres; steering; Tyre tread left outer: 35%; Tyre tread right outer: 80%
Axle 4: Twin tyres; steering; Tyre tread left outer: 40%; Tyre tread right outer: 70%
Axle 5: Twin tyres; steering; Tyre tread left outer: 45%; Tyre tread right outer: 45%
Weights
Unladen weight: 14,500 kg
Payload: 65,500 kg
GVW: 80,000 kg
Functional
Body brand: Goldhofer
Loading platform height: 85 cm
Identification
Registration number: G3763047
Iaedpsu H Ec Aofx Ab Tet
= Company information =
For more information on this unit please call: or e-mail: .
A full stock overview can be found at: .
Please do not forget to subscribe to our newsletter for weekly updates on our stock.
Küçük ilan
Dortmund
2.568 km
Düşük yükleyici
Faymonville5-Achs-Tele-Semi m. hydr. Rampen
Çağrı
Koşul: yeni, boş ağırlık: 15.900 kg, azami yük ağırlığı: 63.500 kg, toplam ağırlık: 68.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 12.700 mm, yükleme alanı genişliği: 2.740 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75/r17,5, renk: gri, işletme ağırlığı: 52.100 kg, Donanım: ABS, Gooseneck:
Gooseneck in SNT design to optimize loading platform length, approx. 3,300 mm long, with rear taper approx. 1,000 mm x 10°
Technical fifth wheel load: 23,000 kg
For tractor units: 6x2, 6x4 and 8x4
Loading Platform:
Telescopic loading platform, length approx. 9,400 mm, with rear taper approx. 500 mm x 10°
A recess integrated into the platform and extending into the incline to accommodate the excavator bucket stick approx. 3,850 x 950 x 210/290 mm
Pneumatic locking with tapered locking pins and reinforced locking positions; supply lines are routed safely inside the extendable beams and automatically adapt to the current platform length
Axles and Tyres:
BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered
Technical axle load: 12,000 kg
Air suspension with lift and lower valve
Axle tool
235/75 R 17.5 3PMSF twin tyres
Load index 143/141J (144/144F)
Two-part Steel Ramps:
One pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide
Hardwood covering
Iodpfx Abomfqi Ij Teat
Hydraulically folding ramp tips
Ramps hydraulically adjustable individually: approx. 235 mm outward, approx. 215 mm inward
Braking System:
WABCO EBS-E brake system in compliance with EU regulations
Sockets and Lighting:
24-volt lighting system
Full Metallization:
Complete HRM metallization with ZINACOR 850 for optimal corrosion protection
Surface Treatment:
Entire steel structure shot-blasted automatically after welding using a blast wheel
Second blasting with corundum for optimal coating adhesion
Final coating with two layers of two-component paint (single colour, Nova grey), then cavity sealing with special wax
Rims in silver grey
Steel Structure:
Steel structure made from high-tensile fine-grained steels
Steel grades: S355J2+N/S355MC, S690QL/S700MC
Accessories:
Plug-in steel front wall, approx. 400 mm high
Connection strip for supply lines to the tractor unit
Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit with plug for electro-hydraulic unit for hydraulic control functions, except hydraulic winches
Outer beam of gooseneck with mounting holes for bolted lashing rings
First hole approx. 200 mm from the front, then every approx. 400 mm
One mounting hole at the upper rear portion of gooseneck outer beam for a bolted lashing ring
Approx. 40 mm thick hardwood flooring above the gooseneck, chequer plate over kingpin area
Gooseneck guide plate for the saddle plate, approx. 500 mm wide
Continuous hardwood flooring (approx. 50 mm thick) over the loading platform, interrupted between the axles
Locking of the loading platform using welded conical locking profiles every 250 mm, including pre-tension plate
Oblong holes for insertable and repositionable bridging elements: on the fixed section behind the gooseneck at the front of the platform
1 sliding intermediate table for the telescopic tube with large cross-section
Operating valves for hydraulic ramps on right side of vehicle
Central lubrication system with 1 pump, standard grease according to NLGI-2
Radio remote control for steering override operation, in addition to cable remote, with 2 indicator lights on receiver for one-track monitoring
Küçük ilan
Andelst
2.692 km
Düşük yükleyici
SCHEUERLEEUROCOMPACT 2+2+5 DIEPLADER/LOWLAODER/TIEFLADER
Çağrı
Koşul: iyi (kullanılmış), ilk tescil: 06/2016, renk: yeşil, Üretim yılı: 2016, Boş ağırlık: 36.400 kg
Yük kapasitesi: 97.600 kg
toplam ağırlık: 134.000 kg
Uzayabilir yapı: Evet
APK (Teknik Ana Muayene): Teslimatta yeni TÜV
Teknik durum: İyi
Görsel durum: İyi
EUROCOMPACT 2+2+5
TOPLAM AKS VARYANTI 9 AKSLI
AKS MODÜLLERİ: 2 x 2 akslı modül, 1 kez 4 akslı + 5 akslı modül olarak kullanılabilir
2 akslı modül, 2 akslı modül, 5 akslı modül
Tüm akslar GIGANT hidrolik pandül akslıdır
Ekskavatör köprüsü: 7100 cm + 300 cm, dışa açılır destek ayakları ve matlar
5 akslı modülde ekskavatör sap köprüsü
Hidrolik deveboynu, hidro paketli
Merkezi yağlama sistemi
Treyler yeni Alman TÜV'e sahiptir!
Iodpfxsyfd Hqe Ab Tjat
Almanca konuşuyoruz
We speak English
Español konuşuyoruz
Küçük ilan
Legden
2.617 km
Alçak şasi römork
LANGENDORFTUE 30 4.Achser Tieflader-Anhänger, Radmulden
Çağrı
Koşul: ikinci el, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 12/2010, bir sonraki muayene (TÜV): 11/2025, * SAF akslar
* Teker yuvaları
* 4. akslar
* Hidrolik yükleme rampaları
* 50 mm çekme halkası
* Boş ağırlık: 9.650 kg
* Azami ağırlık: 24.000 kg
Iajdpfxevav U So Ab Tst
* TÜV: 11.2025
* Periyodik kontrol: 05.2025
-----Dahili araç numarası: 10093----Hatalar ve ara satış hakkı saklıdır.
WhatsApp desteği mevcut!
Araçla ilgili sorularınız veya daha fazla bilgi için bize WhatsApp üzerinden kolayca yazabilirsiniz.
Whatsapp
Whatsapp
Küçük ilan
Legden
2.617 km
Alçak şasi römork
LANGENDORFTUE 40 4.Achser Tieflader-Anhänger, Radmulden
Çağrı
Koşul: ikinci el, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/2016, bir sonraki muayene (TÜV): 11/2025, * SAF akslar
* Teker havuzları
* 4. akslar
* Hidrolik yükleme rampaları
* 50 mm çekme halkası
* Boş ağırlık: 9.460 kg
* Azami ağırlık: 24.000 kg
* Muayene geçerli: 11.2025
* Periyodik kontrol: 05.2025
-----Dahili araç numarası: 10091----Hatalar ve ara satışlar saklıdır.
Isdpfovawacjx Ab Tsat
WhatsApp desteği mevcut!
Araçla ilgili sorularınız veya daha fazla bilgi için bize kolayca WhatsApp üzerinden yazabilirsiniz.
Küçük ilan
Gevelsberg
2.561 km
Araba römorku
HUMBAURHA 752513 5 FS Anhänger 750 kg Tieflader
Çağrı
Koşul: yeni, azami yük ağırlığı: 565 kg, toplam ağırlık: 750 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 2.510 mm, yükleme alanı genişliği: 1.310 mm, yükleme alanı yüksekliği: 500 mm, toplam genişlik: 1.757 mm, toplam yükseklik: 862 mm, Üretim yılı: 2026, Humbaur HA 752513-5-FS
* Car trailer
* Box trailer
* Low loader
* New vehicle
* 500 mm aluminium drop sides
* Gross vehicle weight: 750 kg
* Payload: 565 kg
* Unladen weight: 185 kg
* Internal dimensions: 2510 x 1310 x 500 mm
* Overall dimensions: 3566 x 1757 x 1012 mm
* Loading height: 510 mm
* V-drawbar, hot-dip galvanised
* Standard with 500 mm side panels made of anodised aluminium
* Integrated lashing system in the side panels for optimum load securing, lashing ring tensile strength 400 kg, DEKRA certified
* Rear tailgate with recessed drop side locks
* 13-pin connector
ATTENTION!!!!! PLEASE READ!!!!
We expressly reserve the right to prior sale, as this item is also offered on other platforms.
We strongly recommend viewing and inspection to avoid any misunderstandings regarding condition and suitability. Viewings and inspections are possible by appointment at any time and are expressly encouraged!!!
Images for reference only, may show optional equipment subject to surcharge.
Stated internal dimensions are approximate.
For new vehicles, additional costs for registration documents and freight may apply.
TRADE-INS ACCEPTED ON ALMOST ANYTHING!!!
Iedpfjx Izg Uex Ab Toat
PART EXCHANGE AND BALANCE PAYMENTS POSSIBLE!!!
Showroom: 58285 Gevelsberg, Am Sinnerhoop 17
Opening hours: Monday - Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm
Always over 500 new and used trailers in stock!!!
Pegasus Anhänger GmbH
Am Sinnerhoop 17
58285 Gevelsberg
Tel.: Fax:
Küçük ilan
Hilden
2.585 km
Brandalı açık römork
FruehaufFruehauf 2-Achser SAF Edscha Alu Bordwände
Çağrı
Koşul: ikinci el, boş ağırlık: 5.150 kg, azami yük ağırlığı: 13.850 kg, toplam ağırlık: 19.000 kg, ilk tescil: 12/2016, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.500 mm, yükleme alanı hacmi: 45 m³, süspansiyon: hava, lastik boyutu: 385/65R22,5, renk: mavi, vites türü: diğer, ön lastik ölçüsü: 385/65R22,5, arka lastik boyutu: 385/65R22,5 385/65R22,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, Fruehauf 2-axle trailer
- Internal body dimensions (LxWxH): 7.30 x 2.48 x 2.50 m
- Sliding curtain (tarpaulin)
- Payload: 13,850 kg
- Rear portal doors
Iodpfx Aex I R H Dob Tjat
- Air suspension
- ABS/EBS
- SAF axles
- Tyres: 385/65R22.5
Very good condition! Export price applies.
Errors and prior sale excepted. All information provided without guarantee.
Yourtrucks Group
The Yourtrucks Group maintains business relationships worldwide. Both purchasing and sales activities extend beyond national borders; therefore, all our listings display the export price, which is independent of the intended location of use.
Yourtrucks GmbH compiles the content of this website with the utmost care and ensures it is updated regularly. This information is intended as non-binding general guidance and does not replace detailed, individual consultation when making a purchase decision. Only the terms specified in the purchase contract are binding. Subject to change, errors, typographical mistakes, and prior sale.
Our General Terms and Conditions exclusively apply.
Languages
- We speak English
- On parle français
- Мы говорим по-русски
- Mówimy po polsku
- Hablamos español
- Falamos português
- Parliamo italiano
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Radmulden
Çağrı
Koşul: yeni, azami yük ağırlığı: 38.140 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website.
Partial equipment list. Full specifications available on request.
Gooseneck:
- Gooseneck with approx. 45° chamfered front corners and a rear bevel of approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- Hardwood flooring, approx. 30 mm thick
Loading area:
- Telescopic loading area with rear bevel approx. 1,000 mm x 8°
- Between the 1st and 2nd axle, one pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D)
- Incl. 3-piece removable, galvanized wheel recess covers (approx. 670 mm wide - max. point load 5 t each)
Iaodpow Tpq Defx Ab Tjt
- 1 pair of recessed lashing rings at the front of the loading deck (LC 10,000 daN)
- 4 pairs of outward folding lashing rings (LC 5,000 daN)
- 3 pairs of outward folding lashing rings (LC 10,000 daN)
- Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN)
Landing legs:
- JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load)
Tyres:
Tyres 235/75 R17.5 3PMSF, brand at our discretion
- TPMS tyre pressure monitoring system according to ECE R 141
- Data transmission to the truck via the standardised EBS interface per ISO 11992
- For correct display, the truck must be capable of transmitting and displaying this data.
Axles:
- BPW axles and suspension, 2 fixed axles, 3rd axle self-steering
- Technical axle load: 12,000 kg
- Electromagnetic reversing lock, activatable via reverse gear and manually
- Air suspension with lift and lower valve. Axle tools
Brake system:
- WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit
Electrical system:
- Electrical system in accordance with EU regulations
- LED lighting 24 Volt ASPÖCK-NORDIK (ASS3)
- All LED side marker lights flash with the indicator
- ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098
Steel structure:
Steel frame made of high-strength fine-grain steels.
- Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Paintwork:
- Entire steel structure is automatically blasted after welding using a turbine blasting system
- Second blasting with corundum for optimal coating adhesion
- HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure top corrosion protection
- Final painting with two coats of 2K paint, solid colour in RAL 3002 Carmine Red, rear section metallised and painted in RAL 9010 Pure White
- No metallic paint possible
- Paint finish tested in salt spray test per ISO 9227-NSS
- Sealing of cavities with special wax
Including the following accessories:
- Mounts for warning signs on both sides at the gooseneck and at the rear, including socket
- Spare wheel holder in front of the front wall (without spare wheel)
- 2-inch kingpin
- Galvanized steel front bulkhead, approx. 400 mm high
- Yellow-red air couplings on the galvanized front connection panel
- Galvanized folding supports under the loading area bevel
- Hardwood impact protection on the rear wall from gooseneck to loading platform
- 1 pair of recessed lashing rings along the central frame at the rear on the bevel (LC 10,000 daN)
- Aluminium side walls and tailboard on the gooseneck
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX110 Semi-Tieflader
Çağrı
Koşul: yeni, azami yük ağırlığı: 33.865 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website.
Excerpt from the equipment list. Full equipment details available on request.
Gooseneck
* Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Load Platform
* Double extendable version with rear chamfer approx. 500 mm x 8°
* 6 pairs of outward folding lashing rings (LC 5,000 daN)
* 4 pairs of outward folding lashing rings (LC 10,000 daN)
* 1 pair of recess-mounted lashing rings at the front of the loading area (LC 10,000 daN)
* 1 cross table approx. 250 mm
* Hardwood flooring approx. 48 mm thick, with checker plate coverage over the axles
* Cutouts in the outer frame of the loading area for inserting tensioning straps (LC 2,000 daN)
Axles
* BPW axles and suspension, all axles hydro-mechanically forced steered
* Technical axle load: 12,000 kg per axle
* Air suspension with lift and lower valve
* Axle tool kit
Tyres:
* Tyres 245/70 R 17.5, load index (146/146 F)
* Brand of our choice
Landing Legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Brake System:
* Brake system compliant with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit
Paintwork:
High-quality, durable corrosion protection
* High-quality 2-component (2K) topcoat painted in RAL 3002 carmine red
* Rear section metallized and painted in RAL 9010 (pure white)
Steel Construction:
Steel construction made of high-strength fine-grain steels
* Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa)
Electrical System:
* Electrical system according to EU regulations
* Lighting 24 volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098
Including the following additional equipment:
* 2-inch king pin
* Galvanized steel front wall, approx. 400 mm high
Iaodpfx Aow Tprzob Tjt
* Yellow-red air couplings at the galvanized front wiring panel
* Spare wheel carrier in front of the front wall
* Electro-hydraulic power unit
* Remote steering from the front and rear via cable remote control with push buttons, with single-track axle alignment (without installation in the tractor unit)
* Rear gooseneck mounting point for aluminum loading ramps
* Rear hanging rail for aluminum loading ramps
* Galvanized folding supports under the rear chamfer of the load platform
* On the gooseneck: removable aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H)
* Removable galvanized rear stanchions (body length approx. 2,560 mm)
* Tool box, galvanized, integrated in the chamfered gooseneck
* 4 pairs of WADER container pockets in the load area for 1x 20', 2x 20', 40', or 45' containers
* 8 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the cargo area
* Galvanized wideners, extendable by approx. 230 mm per side
* Movable hanging rails for aluminum loading ramps at the rear of the vehicle
* 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear
* Central lubrication system with 2 BEKAMAX (Pico) pumps using NLGI-2 standard grease and removable protection around the pump
* 2 LED reversing lamps mounted on the rear panel
* HRM Metallization (High Resistance Metallisation). Complete steel structure sh
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX110 Semi-Tieflader
Çağrı
Koşul: yeni, azami yük ağırlığı: 37.680 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our entire vehicle inventory, including immediately and short-term available vehicles, on our website.
Extract from the equipment features. Full equipment list available on request.
Gooseneck
* With approx. 30 mm hardwood flooring. Straight design at the rear of the gooseneck
* 3 pairs of lashing rings (LC 5,000 daN)
Load Platform
* Extendable version
* 5 pairs of outwards-folding lashing rings (LC 5,000 daN)
* 3 pairs of outwards-folding lashing rings (LC 10,000 daN)
* 1 pair of flat lashing rings at the front of the load platform (LC 10,000 daN)
* Cut-outs in the outer frame of the load platform for attaching tie-down straps (LC 2,000 daN)
* Approx. 48 mm hardwood flooring, over the axles with checker plate covering
Landing Gear
* JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Iodpfxov Etx Es Ab Toat
Tyres
* 205/65 R 17.5
Axles
* BPW axles and suspension
* 1st axle fixed, all other axles hydro-mechanically forced-steered
* Air suspension with lift/lower valve
Braking System
* In accordance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit
Steel Construction
* Manufactured from high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Paintwork
* Premium and durable corrosion protection on the standard shot-blasted welded chassis via a 2-component (2K) zinc-rich primer
* High-quality 2-component (2K) single-colour topcoat in RAL 3002 carmine red
* Rims in silver
Included Accessories
* 2-inch kingpin
* Galvanized steel front wall, approx. 400 mm high
* At the galvanized front connection rail: yellow-red air couplings
* 4 chocks with holders at the front wall
* Spare wheel carrier in front of the front wall
* Electro-hydraulic power pack
* Remote steerable axles from front and rear via cable remote control with push buttons, with single-track monitoring (installation in tractor unit not included)
* European reflective plates (red/yellow) at the rear of the trailer
* Yellow reflective tape in accordance with EU regulations on the sides, extension, and rear of the trailer
* Mounts for warning signs with socket at both the gooseneck and rear panel, both left and right
* Mount for a beacon at the rear of the trailer
* Galvanized folding supports under the inclined portion of the load platform
* Load gauge to determine axle loads, including load chart
* 7 pairs of WADER container locks for: 1x 20' or 1x 40' container on the load platform, 1x 40' container over the gooseneck or 2x 20' containers
* Support block with 1 pair of WADER container locks, load capacity approx.: 20,000 kg
* 7 pairs of pocket stakes for 100 x 50 mm plug-in stakes in the outer frame of the load platform
* Galvanized, extendable widening brackets by approx. 230 mm per side
* Adjustable hook-in rails for aluminium drive-up ramps at the rear of the vehicle
* 1 pair of recessed lashing rings along the central beam at the rear of the load platform (LC 10,000 daN)
* 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear
* BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable pump protection
* 2 LED reversing lights mounted at the rear
* Acoustic warning signal when reversing
* HRM Metallisation (High Resistance Metallisation)
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Radmulden
Çağrı
Koşul: yeni, azami yük ağırlığı: 37.820 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately or short-term available vehicles on our website.
Excerpt from the equipment list. Full equipment details available on request.
Gooseneck: Gooseneck with front corners beveled at approx. 45° and rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Load platform:
* 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D)
* Wheel recesses with square climbing strips approx. 15 x 15 mm and widenings at the lower section
* Between the 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D)
* Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) - max. point load approx. 5 t/each
* Recess in the beveled area and extending into the load platform for accommodating the excavator dipper stick (approx. 2,900 x 750 x 210/290 mm (L x W x H))
* 1 pair of horizontally mounted lashing rings at the front of the loading area (LC 10,000 daN)
* 5 pairs of outward foldable lashing rings (LC 5,000 daN)
* 3 pairs of outward foldable lashing rings (LC 10,000 daN)
* 2 pairs of lashing rings in the excavator boom recess (LC 5,000 daN)
* Cut-outs in the outer frame of the load platform for attaching tensioning straps (LC 2,000 daN)
One-piece steel ramps:
* 1 pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering
* Ramp with hydraulic lifting system, hydraulically adjustable
* Maximum load per pair: 40,000 kg
* In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not have to be included in the vehicle length when in driving position
Landing legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles and suspension, 2 axles rigid, 1 axle self-steering
* Technical axle load: 12,000 kg each
* Electromagnetic reversing lock, can be engaged via reverse gear and manually
* Air suspension with lift and lower valve
* Axle tools
Iasdsw Tpqwepfx Ab Tot
Tyres:
* Tyres 235/75 R 17.5 3PMSF – Brand of our choice
* TPMS tyre pressure monitoring system as per ECE R 141. Data transfer to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be capable of both receiving and displaying this data
Brake system:
* WABCO brake system in compliance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit
Steel construction:
* Steel construction made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Electrical system:
* Electrical system as per EU regulations
* Lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the indicator
* ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Coating:
* Complete steel structure automatically shot-blasted with turbine system after welding
* Second sandblasting with corundum for optimum adhesion of the coating system
* HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection
* Final coating with two layers of 2K topcoat, plain color RAL 3002 Carmine Red in accordance with RAL system 841GL
* Rims in silver
* Rear section metalliz
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Wiesmoor
2.630 km
Alçak şasi römork
LANGENDORFTUE 24/100-3 3-Achser Tieflader
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 17.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/1996, yükleme alanı uzunluğu: 8.100 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 24.000 kg
Boş ağırlık: 6.100 kg
Yük taşıma kapasitesi: 17.900 kg
Toplam uzunluk: 10.400 mm
Yükleme uzunluğu: Toplam 8.100 mm, arka eğim dahil 6.000 mm, dirsek kısmı 2.100 mm
Genişlik: Toplam genişlik 2.550 mm / yükleme genişliği 2.540 mm
Ijdpfx Abow Rumxs Tsat
Yükseklik: 900 mm
Diğer bilgiler:
- Katlanabilir arka destek
- Uyarı levhaları
- Çift lastikli 235/75R17,5
- SAF akslar
- Hidrolik rampalar
- Yanlara kaydırılabilir rampalar
- Tırmanma çıtaları
- Yükleme alanı kauçuk kaplama
- Büyük bağlama paketi
- Çarpma koruması
- Elektronik tekerlek
- Ekskavatör kolu için oyuk
Küçük ilan
Andelst
2.692 km
Yarı alçak yükleyici
FaymonvilleF-S42-111A SEMI DIEPLADER/TIEFLADER/LOWLOADER
Çağrı
Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2020, renk: kırmızı, Üretim yılı: 2020, Donanım: ABS, Rear axle 1: Twin tyres
Rear axle 2: Twin tyres; Steered
Iaodpfxex Upxxs Ab Tet
Unladen weight: 8,060 kg
Loading platform height: 86 cm
Extendable superstructure: Yes
Technical condition: Very good
Optical condition: Very good
Price: On request
FAYMONVILLE F-S42-111A SEMI LOWLOADER
2x SAF axles
1x Steering axle (trailing)
Tyre size
Extendable loading platform
Length 680 cm + 420 cm extendable, total loading platform length 1,100 cm
Loading platform width 254 cm
Loading platform height ±86 cm
Gooseneck length 330 cm
Lashing eyes, pockets, twistlocks
Follow us on Instagram: geurtstrucks
Low loader is year of manufacture 2016, but sold as new in 2020
Wir sprechen Deutsch
Hablamos Español
We speak English
Küçük ilan
Andelst
2.692 km
Yarı alçak yükleyici
Rojo TrailerKT3 ST EXTENDABLE SEMI DIEPLADER/TIEFLADER/LOWL...
Çağrı
Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, renk: mavi, Üretim yılı: 2019, Donanım: ABS, = Additional Options and Accessories =
- Lifting axle
- Air suspension
= Further Information =
Year of manufacture: 2019
Rear axle 1: Twin tires; Steering
Iaodpfx Aouxxc Teb Tjt
Rear axle 2: Twin tires; Steering
Rear axle 3: Twin tires; Lift axle; Steering
Technical condition: Very good
Visual condition: Very good
Price: On request
ROJO TRAILER KT3 ST EXTENDABLE SEMI LOWBED
3X SAF HYDRAULICALLY STEERED AXLES
LAST AXLE IS LIFTABLE
RADIO REMOTE CONTROL
AIR SUSPENDED
TYRE SIZE 245/70/R17.5
GOOSENECK LENGTH 308 CM
EXTENDABLE LOADING PLATFORM
LOADING PLATFORM LENGTH 678 CM + 300 CM EXTENDABLE; TOTAL PLATFORM LENGTH 978 CM
PLATFORM WIDTH 254 CM
LOADING FLOOR HEIGHT ± 89 CM
LENGTH FROM KINGPIN TO END OF LOWBED 927 CM
TOTAL LENGTH 987 CM
4X HYDRAULIC SUPPORT LEGS
LASHING EYES FOR ROPES
PREPARED FOR TWISTLOCKS FOR 20 FT CONTAINER
FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS, COMMERCIAL VEHICLES, AND MACHINES FOR SALE.
WIR SPRECHEN DEUTSCH
WE SPEAK ENGLISH
HABLAMOS ESPAÑOL
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
MösleinTTT 11 5,2 BR Weiß Neuer Tandemtieflader mit Breiten Rampen
Çağrı
Koşul: yeni, boş ağırlık: 2.980 kg, azami yük ağırlığı: 7.520 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.280 mm, yükleme alanı genişliği: 2.480 mm, süspansiyon: çelik, lastik boyutu: 245/70 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 245/70 R 17,5, arka lastik boyutu: 245/70 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, her rampa yaklaşık 2.700 mm uzunluğunda x 900 mm genişliğinde, ızgara platformlu rampalar, yükseklik: 840 mm, her biri 2,5 t olan 10 bağlama halkası, her biri 6 t olan 8 bağlama halkası, çelik yan paneller - katlanabilir ve çıkarılabilir, 50 mm ahşap döşeme, arka bölümde eğimli yükleme alanı, iç yükleme genişliği 2.480 mm, arka destek çıkarılabilir, önden yükleme imkanı, 6.300 mm yükleme uzunluğunda da mevcut!!, kira ücreti 500 €'dan başlayan fiyatlarla, -- yazım hataları, değişiklik ve yanlışlıklar saklı tutulur, örnek resimler --, Daha fazla bilgi için: !, More Details: !
Iasdpfx Abjy Irxbj Tet
Sizin için aramayı kolaylaştırıyoruz: "broshuis semi tieflader 5 achser saf teleskop - nr.: 036"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.






































































































































































































































