Kullanılmış Müller-Mitteltal 2-Ach Tandem Plateau Anhänger + Rampen satın al (49.691)

Koşul: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle equalization front and rear * Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required * Warning sign packages front & rear Nlodpsl Th Evefx Alasb * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at the rear * 24 V - 15-pin and additionally 12 V - 7+4-pin power cable * Extended connection lines for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Tool box made of powder-coated sheet steel and spare wheel carrier in basket design, right side * Enclosed single plastic mudguards at the front * Straight rear steel splash guards each with spray suppression * Side underrun protection * Extended offset cranking by 500 mm to the front * Turntable platform extended by 520 mm at the front with 45° corners and 3 recessed, lockable storage compartments including covers * Chassis made of high-strength fine-grained steel * Floor over the turntable platform made of 50 mm softwood, in the lowbed platform 60 mm softwood * Outer planks of the access ramps made of 50 mm bamboo wood * Four stake pockets on each side (stakes not included) with simultaneous 2 t lashing capacity * Lashing package consisting of: 2 lashing rings 6.4 t at the front left and right on the main frame of the turntable platform, each 1 pair 13.4 t lashing rings front and rear on the outer frame, and additionally 4 pairs 10 t swivel and lowerable lashing rings per side, loadable in all directions and recessed in the outer frame, 2 pairs 6.4 t lashing rings sideways at the excavator stick holder, 8 pairs galvanized folding extensions for 3 m total width (not including rear slope) * Widening planks stored in a side locker on the left * Excavator stick holder above the rear axle to the end of the approach slope approx. 2,300 x 740 x 190 mm * Mechanical rear supports * Hydraulic, hot-dip galvanized access ramps approx. 3,000 x 720 mm * Hydraulic side-shifting of ramps on sliding tube from ramp shaft * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm approach slope) * Chassis, turntable, access ramps, mechanical folding supports at rear hot-dip galvanized * Axles, springs, air tanks and turntable painted in black * New vehicle with manufacturer’s warranty * Errors and interim sale excepted * Available immediately from Egestorf

Koşul: ikinci el, azami yük ağırlığı: 12.750 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/1994, bir sonraki muayene (TÜV): 05/2026, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.300 mm, toplam genişlik: 2.450 mm, toplam yükseklik: 1.600 mm, Gross weight: 18,000 kg Unladen weight: 5,250 kg Payload: 12,750 kg Overall length: 7,150 mm Loading length: approx. 5,000 mm Width: 2,450 mm / Loading width approx. 2,300 mm Loading height: approx. 1,600 mm Additional information: Nsdpfx Aloy T T T Roaolb - Height-adjustable support leg - Height-adjustable drawbar - Side walls approx. 770 mm, split in the middle, fold-down - Tailgate approx. 900 mm - BPW axles - Tyres: 385/65R22.5 - LED reversing lights

Koşul: ikinci el, boş ağırlık: 6.400 kg, azami yük ağırlığı: 23.600 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2013, yükleme alanı uzunluğu: 7.800 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 920 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: sarı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Araç konumu: yolda / sevkiyat halinde, 3 aks, döner tabla, yaprak süspansiyon, ABS (kilitlenmeyi önleyici fren sistemi), bağlama halkaları, hidrolik rampalar, arka destek, yan alüminyum yan koruma, ikiz lastikler. Üst yapı: Hidrolik çıkış rampalı, galvanizli rampalara sahip 3 akslı alçak şase treyler, 3x 10 tonluk akslar! Tüm bilgiler, aracın sevkiyat halinde olması nedeniyle teyitsizdir! Aksesuar bilgileri kesin değildir, değişiklik, ara satış ve hatalar saklıdır! Njdsy R Ekispfx Alajlb

Koşul: ikinci el, azami yük ağırlığı: 6.800 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 04/2026, Müller-Mitteltal KWH 9.9 ML Cable Transport Trailer with Diesel Engine * KWH 9.9 ML * Drum brake system EBS 2S/2M * BPW axles * Leaf suspension with parabolic springs * Spring-assisted square tube props at the rear with base plate, safety locking bolts for various support heights * Drawbar with 40 mm or 50 mm bolt-type towing eye (height adjustable, mm) * Bracket for additional drawbar, mounted laterally on the towing device, on the right in the direction of travel * Chassis made of torsion-resistant square tubes and cross beams * Plastic toolbox * LED lighting * Swivelling cable drum assembly consisting of base frame, rotary bearings, and drum carrying arms * Carrying arm ends with clamping closure for securing the drum shaft Nedpfx Aloy R Ipneajlb * Locking of the swivelling cable drum assembly to the chassis via a centrally positioned claw lock * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * For drum diameters of 3,000 mm, a maximum drum width of 1,650 mm is possible * Motor-hydraulic operated pull and push cylinders with load-holding valve * Control valve with automatic neutral position and pressure relief valve * Connectors, hoses, and pipes for hydraulic system in NW 13 * Required oil volume approx. 10 liters * Drum drive, hydraulic motor-driven, with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive * Pump assembly, hydraulically operated, with diesel engine and manual start, 6.5 HP with gear pump (150 bar) * Pressure supply selectable by switching connection lines between truck hydraulics or pump unit * Weather protection cover, hot-dip galvanized without top coat * Tyres: 315/80 R22.5 Interim sale and errors explicitly reserved! Sale exclusively under our Terms and Conditions. Important Notice: Despite careful verification of all details in our offer, errors may occur. Some may result from data transmission errors in the systems of various platform providers. Therefore, please note that all specifications are without guarantee and do not represent a legal claim. Legal Notice: This sale listing does not constitute an offer within the meaning of §145 of the German Civil Code (BGB). Instead, it provides information for contract initiation. The information provided here is without guarantee and does not constitute warranted characteristics.

Koşul: yeni, azami yük ağırlığı: 10.400 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly Nledpfjtr Sucjx Alaob ----Drawbar / flange eye: * Height-adjustable drawbar by 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring system with readout in truck via EBS signal, no installation required on truck side * 15-pin power connector * LED tail lights ----General accessories: * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm, mounted on right side * Bolted underrun protection * Plastic quarter mudguards ----Chassis frame: * Main frame made of high-tensile fine-grained steel ----Tipper body: * Mesh hooks on the sides and rear at the central locking bearings, plus 2 hooks at the front wall * Steel pallet - 2-way tipper body with fixed steel front wall, continuous smooth steel side walls, folding without center stanchions using drop-side spring lifters, also swinging via manual central locking * Rear stanchions bolted * Steel rear panel slid in front of the ramps * 1 x 5 t lashing point in each corner, 4 x 3 t lashing rings recessed per side in the outer frame * 4 mm floor made of fine-grained steel ----Ramps: * Two-part mechanical grating ramps with aluminium nose sections, 2,150 + 1,300 mm x 600 mm (manually retractable to 80 mm) ----Paintwork: * Chassis, drawbar, rear stanchions, underrun protection, mechanical supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, flange eye, and support winch painted in black tone * Sideboards and tipper body finished in RAL 9010 pure white * Optional: painting of side walls and tipper body in any RAL color available at additional cost ----Additional information: * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Available from week 07/2026

Koşul: yeni, azami yük ağırlığı: 10.400 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * ETK-TA-R 14.4: Nlsdpfxotr St Ue Alaeb ----Brakes: * EBS (Electronic Braking System) * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / flange eye: * Height-adjustable drawbar by 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring system with readout in truck via EBS signal, no installation required on truck side * 15-pin power connector * LED tail lights ----General accessories: * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm, mounted on right side * Bolted underrun protection * Plastic quarter mudguards ----Chassis frame: * Main frame made of high-tensile fine-grained steel ----Tipper body: * Mesh hooks on the sides and rear at the central locking bearings, plus 2 hooks at the front wall * Steel pallet - 2-way tipper body with fixed steel front wall, continuous smooth steel side walls, folding without center stanchions using drop-side spring lifters, also swinging via manual central locking * Rear stanchions bolted * Steel rear panel slid in front of the ramps * 1 x 5 t lashing point in each corner, 4 x 3 t lashing rings recessed per side in the outer frame * 4 mm floor made of fine-grained steel ----Ramps: * Two-part mechanical grating ramps with aluminium nose sections, 2,150 + 1,300 mm x 600 mm (manually retractable to 80 mm) ----Paintwork: * Chassis, drawbar, rear stanchions, underrun protection, mechanical supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, flange eye, and support winch painted in black tone * Sideboards and tipper body finished in RAL 9010 pure white * Optional: painting of side walls and tipper body in any RAL color available at additional cost ----Additional information: * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Available from week 07/2026

Koşul: yeni, azami yük ağırlığı: 11.050 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low-loader Three-way tipper trailer with ramps Nedpfxeyvxg Ie Alaslb * NEW VEHICLE * Now available immediately in RAL 9016 traffic white * Leasing, financing, and trade-in of your old trailer possible * Ref. No. for inquiries: 11654 * ABS with optional truck display via EBS signal * Side marker lights with indicator function * Gross weight: 14,400 kg, Payload: 11,050 kg * EBS 2S/2M * Galvanized floor 5m x 2.42m x 0.5m, laser-welded sideboards, swinging, folding, removable, pre-fitted for later sidewall extension kits * Lockable compartment under the tipping bridge for loading ramps * Includes 1 pair of aluminium loading ramps, 8t/pair, length: 3.57m * Chassis hot-dip galvanized, front wall hot-dip galvanized * 4 UVV tie-down rings LC 5000daN (front & rear) + 8 recessed and foldable lashing eyes LC 3000daN in the tipping floor (centrally aligned) * Hardwood excavator bucket rest * Two-step access in front of the front wall (hot-dip galvanized) * Continuously height-adjustable, hot-dip galvanized drawbar, 40 mm towing eye * Wide tyres 385/55R 19.5 (4x), parabolic springs * Net hooks, bolted rear stanchions, hot-dip galvanized * Guide ropes for the rear drop side * Plastic toolbox on the right-hand chassis frame * LED lighting system 12 + 24 Volt * 2 LED reversing lights at the rear of the trailer * Lease-purchase price: * e.g. €560 for 60 months, without down payment, no residual value. An offer from our financing partner "FM LeasingPartner". Other terms with/without residual value or down payment available. * Request an offer from us! * We are Müller-Mitteltal authorized dealer * Delivery to your site possible with timely order! ----Our opening hours Monday – Thursday: 08:00 – 17:00 Friday: 08:00 – 15:00 Outside of business hours, we are available by appointment. We speak German, English, Polish, French. WhatsApp

Koşul: ikinci el, azami yük ağırlığı: 6.940 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2018, bir sonraki muayene (TÜV): 11/2026, yükleme alanı uzunluğu: 5.360 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 350 mm, toplam genişlik: 2.550 mm, Donanım: ABS, Equipment: * 40 mm jaw-type coupling, * height-adjustable towing eye, * fold-down side walls, * storage box, * removable tailgate, * towing eyes, * BPW axles, * galvanized, Other information: * 1 previous owner, * German first delivery, * Downgraded from 11.9 t to 10.0 t without technical modifications, Nedpfx Asy Si Etslaelb Since 1972, your reliable partner for cars and commercial vehicles in 28832 Achim at Bremer Kreuz. NutzfahrzeugZentrum Behnke always has around 200 vehicles available, including vans, commercial vehicles and construction machinery! We continually offer you attractive financing options at special rates. If interested, we are happy to provide you with an individual offer! Trade-in of your commercial vehicle/construction machinery is welcome. If a new TÜV inspection is required, we will be pleased to arrange an offer through our partner workshops. Our offer generally does NOT include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible via our external partners at an additional cost. The details provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed features. The seller assumes no liability/warranty for typographical errors or data transmission mistakes. Listed equipment may need to be checked separately where applicable. Errors and interim sales excepted.

Koşul: ikinci el, azami yük ağırlığı: 31.820 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/1980, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 3.000 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 900 mm, Üretim yılı: 1980, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal T4 Low-bed Trailer * SAF axles with drum brakes * Twin tires * Low-bed deck with platform extension * Hydraulic loading ramps, adjustable (2 units) * Drivable gooseneck * Additional rear supports * Turntable design ----Dimensions & Loading Platform * Loading platform length approx. 9,800 mm * Loading platform width: 2,550 - 3,000 mm * Loading platform height: 900 mm ----* Permissible total weight: 40,000 kg * Payload: 31,820 kg * Tyres: 235/75R17.5 ----Vehicle number: 11892 ----Errors and prior sale reserved ----Advertising and various inscriptions have been digitally removed. -----We are happy to assist you with all formalities arising from the purchase of a vehicle. Simply let us know your requests and suggestions, and we will take care of them. Among other things, we can offer the following services for an additional fee: ----Trade-in of your old vehicle TÜV or safety inspection Complete export processing Financing arrangement Application for export licence plates Vehicle transfer Vehicle registration Nedpfoy Skl Iox Alaolb Vehicle recovery and transport ?YOUR VTS TEAM

Koşul: ikinci el, boş ağırlık: 4.500 kg, azami yük ağırlığı: 13.500 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 08/2015, bir sonraki muayene (TÜV): 07/2025, yükleme alanı uzunluğu: 4.800 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 1.000 mm, renk: mavi, Üretim yılı: 2015, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, * German trailer * Condition as shown in photos * Müller-Mitteltal 3-way tipper, type KA-TA-R 18.0 tandem * Tipper dimensions: 4,800 x 2,400 x 1,000 mm * Roll tarp * Air suspension * Disc brakes * Platform * Jost support leg * Permissible load: 13,500 kg If a new TÜV inspection is required, we will gladly provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. Nlsdswz H Nbepfx Alaeb You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods to avoid any misconceptions about the condition and suitability by the buyer. Inspections and examinations are possible at any time by appointment and are expressly encouraged. All information is without guarantee. No liability is accepted for mistakes or incorrect details in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.

Koşul: yeni, azami yük ağırlığı: 9.070 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.010 mm, yükleme alanı yüksekliği: 325 mm, Üretim yılı: 2026, * ETS-TA-B 11,9: Nedswyhzvopfx Alaolb * Wabco EBS (elektronik fren sistemi) * RDÜ (lasti̇k basinci izleme) * Kampanalı frenler, 2 x 5,5 ton Gigant dingil * Parabol yaylar, dengeleyici ünite ile * Yaklaşık 300 mm yükseklik ayarlı çekme kolu * BPW destek makarası * Arkada mekanik düşey destekler * Ön sağda ön panelde plastik alet kutusu * Yan koruma çubuğu * LED aydınlatma * 50 mm iğne yapraklı ahşap zemin * Ön panel ve arka travers köşelerinde 1 x 6,3 ton bağlama halkası, dış şasede yanlarda 2’şer 6,3 ton UVV bağlama halkası * Tek parça, yay mekanizmalı, tek operatörlü çelik ızgara tip rampa, yaklaşık 2.350 x 870 mm (iç mesafe 20 mm, rampalar kaydırılamaz) * Ön panel, yan paneller, çamurluklar ve çekme kolu sıcak daldırma galvanizli * Dingiller, yaylar, hava tankı, ön destek makarası siyah tonlarda boyalı * Yeni araç, tam üretici garantili * Hatalar ve ara satış hakkı saklıdır * Yaklaşık 35. hafta / 2026 teslim

Koşul: yeni, azami yük ağırlığı: 13.410 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, yükleme alanı hacmi: 11 m³, Üretim yılı: 2026, * KA-TA-R 18.0 ML * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes * Tire pressure monitoring system with display capability in the truck’s dashboard via EBS signal (installation on the truck side not required) * 2 x 9 t Gigant axles Nlsdpfx Aexl Nkgolaeb * Air suspension with level control during tipping operation * Drawbar with 50 mm flange eye (adjustable by +77 mm and -33 mm via offset plate) * Jost landing gear at the front * Foldable galvanized steel underrun protection for paver feeding * Closed individual plastic fenders * Standing platform at the front wall * Manual roll-up tarpaulin * 15-pin electrical connector * LED tail lights with galvanized protective cover * 2 LED reversing lights * Chassis made of fine-grain steel * Steel three-way tipper body (side walls with MM profile – continuous without central stanchion – side walls pendulum-mounted via manual central locking, left side foldable with wall spring assist) * Roll tarp similar to RAL 7038 agate grey, with tarp tensioning by side ratchets and front and rear tensioning rubbers * Front wall platform of grating with step at the drawbar and a hand grip on the front wall * Tailgate made of HBW 400 steel, pendulum-mounted with automatic double claw lock * 5 mm steel floor from HBW 450 steel * Each side with 4 x 3 t recessed and foldable lashing rings – integrated in the steel floor * Reinforced and certified structure according to EN 12642 XL including cargo securing certificate up to 19 t * Side wall painting in a RAL color of your choice (excluding special or metallic paints) – color can be changed up to approx. 6 weeks before delivery * Axles, air tanks, landing gear, flange towing eye painted in black tone * Chassis, underrun protection and drawbar hot-dip galvanized * New vehicle with full manufacturer’s warranty * Errors and prior sale excepted * Available from approx. week 44 / 2026

Koşul: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – no installation required on the truck side * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Height-adjustable drawbar (~300 mm) with 40 mm flanged towing eye * Jost manual landing gear at the front * Two manual folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted at the front right side of the chassis * 15-pin power connector * LED rear lights 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards * Tie-down hooks at the positions of the central locking as well as 2 pieces at the front wall * Chassis made of fine-grained steel Nljdpfxox Hm Rcj Alaeb * Steel pallet-style three-way tipper body with reinforced Strong side panels (continuous side walls at the top with internal tube reinforcement – without mid-stakes – foldable with panel spring lifter) * Rear stakes bolted * Combination steel double-wing rear doors, asymmetrically split – can be swung and locked at 270°, not foldable – with additional pendulum frame for automatic tailgate opening during tipping operation, locking by zinc-coated rotary bolt closure at the rear and central locking, deactivation function for automatic tailgate during reverse tipping with open wing door * Each corner equipped with one 5 t lashing point, each side with four 3 t lashing rings recessed in the outer frame * 4 mm floor plate made of fine-grained steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load bearing capacity 10 t/pair) suitable for rubber-tired & tracked vehicles * Lockable storage compartment recessed under the loading platform at the rear in the chassis for ramps * Drawbar, underrun protection, rear stakes and rear folding supports hot-dip galvanized * Axles, springs, air tanks and landing gear painted in a shade of black * Tyres: 358/55 R 19.5 * Side panels painted to customer’s RAL color specification (except special or metallic paint) – may be changed up to approx. 6 weeks before completion * Errors and prior sale excepted * Available from week 29/2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Tire pressure monitoring with display capability in the truck via EBS signal - no truck-side installation required - Nljdpfxex Hm Ris Alajb * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem balancing unit * Drawbar height-adjustable by approx. 300 mm with 40 mm flanged towing eye * Jost mechanical landing gear at the front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on chassis * 15-pin power connector * LED tail lights 12/24 V * Bolt-on underrun protection * Plastic quarter fenders * Net hooks at each lock location and 2 at the front wall * Chassis made of fine-grain steel * Steel pallet - three-way tipper body with reinforced strong side boards (continuous upper side walls with internal pipe reinforcement - without intermediate stanchions - foldable with board spring lifter * Screw-on rear stanchions * Combination steel swing door rear wall, 2-leaf, asymmetrically split, can be swung and locked up to 270° - not foldable - with additional pendulum frame for automatic tailgate opening when tipping, locking via galvanized rotary bar lock at the rear and central locking, deactivation function for automatic tailgate function when tipping backwards with doors open * In each corner, 1 x 5 t lashing point and each side, 4 x 3 t lashing rings recessed in the outer frame * 4 mm fine-grain steel floor plate * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair aluminum ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Rear lockable storage compartment recessed into the chassis below the loading area for ramp storage * Drawbar, underrun protection, rear stanchion, rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in a black shade * Tires: 358/55 R 19.5 * Side walls painted in customer-chosen RAL color (no special or metallic paints) – color can be changed up to approx. 6 weeks prior to completion * Subject to errors and prior sale * Available immediately from KW 29/2026 * Sample images

Koşul: ikinci el, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2016, Donanım: ABS, Johanning's Nutzfahrzeuge'ye hoş geldiniz, genç ve seçkin ikinci el araçlar konusunda uzmanınız. Hemen teslim! Teslimat mümkündür. Fiyat talep üzerine! Finansman ve kiralama seçenekleri talep üzerine mümkündür. Konum: 39606 Osterburg Marka: Mueller Mitteltal Model: TA-2 / ETUE-TA-R 11,9 Yıl: 2016 Boş ağırlık: 3.250 kg Muayene: Mart 2026 dinamik muayene: Eylül 2026 Genişlik: 2,47 m Uzunluk: 6,20 m Yükseklik: 90 cm Daha fazla fotoğraf veya video için lütfen talepte bulunun. Nljdpfxjycpd Aj Alaeb Johanning's Nutzfahrzeuge – seçkin ve genç ikinci el araçlar için ortağınız. Hizmetlerimiz – Sizin avantajlarınız (satış sonrası) - Aracınızın durumu ne olursa olsun takas imkanı - Aracınızın ücretsiz anında kayıttan düşülmesi - 150 €'ya tescil hizmeti (ücretler ve plakalar dahil) - Kısa süreli tescil - Her zaman telefonla randevu alarak inceleme ve test sürüşü mümkün - Anlaşmaya göre kapıya teslimat mümkündür. Yanlışlık ve ara satış hakkı saklıdır.

Koşul: yeni, azami yük ağırlığı: 9.070 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.010 mm, yükleme alanı yüksekliği: 325 mm, Üretim yılı: 2026, * ETS-TA-B 11,9: * Wabco EBS (elektronik fren sistemi) * RDÜ (lastik basıncı izleme) Nlodpfx Alewyhzpeaeb * Kampanalı frenler, 2 x 5,5 ton Gigant dingil * Parabol yaylar ve denge tertibatı * Yaklaşık 300 mm yükseklik ayarlı çekme kolu * BPW destek ayağı * Arka mekanik düşme destekleri * Ön sağda yan duvara monte plastik alet kutusu * Yan darbe koruması * LED aydınlatma * 50 mm iğne ağacı zemin * Ön duvar ve arka travers köşelerinde her biri 1 x 6,3 ton sabitleme halkası, yanlarda ise her biri 2 x 6,3 tonluk UVV sabitleme halkası dış çerçeveye entegre * Tek parça mekanik ızgara rampa, yay mekanizmalı, tek kişiyle kullanım için yaklaşık 2.350 x 870 mm (iç mesafe 20 mm, rampalar kaydırılamaz) * Ön duvar, yan duvarlar, çamurluklar ve çekme kolu sıcak daldırma galvanizli * Dingiller, yaylar, hava tankı, ön destek ayağı siyah renkte boyalı * Tam üretici garantisine sahip yeni araç * Hatalar ve ara satış hakkı saklıdır * Yaklaşık 35. hafta / 2026'dan itibaren teslim edilebilir

Koşul: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, return-to-ride (RtR) valve, and manual lowering for loading operations ----Drawbar / Flange Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: Njdpfevin T Sjx Alaelb * 15-pin 24 V connector * LED rear lights 12/24 V mounted in underride guard ----General Attachments: * Landing leg at the front * External folding supports at the rear * Plastic toolbox – approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipping Body: * Steel pallet – 3-way tipper body made from high-strength fine-grained steel with high M-Strong sideboards and reinforced 180 bar tipping cylinder * Fixed front wall made from smooth steel sheet * Hardwood board for excavator bucket, bolted to front wall * Continuous side walls – folding, without central stanchion, with sideboard spring lifts and swinging via manual central locking * Screw-on rear stanchions * Combination steel rear swing doors – two asymmetrically split doors, swiveling and lockable up to 270°, non-folding, with additional swing frame for automatic rear door opening during tipping, locking via galvanized rotary bar and central locking system, deactivation function for automatic rear door opening when tipping backwards with open swing doors * 4 mm steel floor * Two-step access on front left * Mounting rail at rear for loading ramps ----Load Securing: * One 7-tonne lashing ring in each corner * Four 3-tonne lashing points recessed per side into the outer frame ----Loading Ramps: * Receiving chamber for loading ramps recessed in chassis at the rear * One pair of aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tyred and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipper body, underrun guard, rear folding supports hot-dip galvanized * Sideboard painting in a RAL colour of choice (except for special or metallic paints), can be changed up to approx. 6 weeks prior to completion * Axles, air tanks, flange drawbar eye, and front landing leg painted in black ----Information: * -- Load securing certificate in accordance with EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Koşul: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including Run-on-Release (RtR) valve and manual lowering for loading operations ----Drawbar / Towing Eye: * Drawbar with positive-lock height adjustment * 50 mm flange towing eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12/24 V integrated into underride guard Nledpfx Aovin Ucolaeb ----General Attachments: * Front support winch * External folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipper Body: * Steel platform – 3-way tipper body made of fine-grained steel with reinforced "M-Strong" high sideboards and reinforced 180 bar tipping cylinder * Fixed front bulkhead made of smooth steel sheet * Hardwood pad for excavator bucket, bolted to the front bulkhead * Continuous side walls – without center stanchion – folding, with sidewall spring assist and swaying function via manual central locking * Rear posts bolted * Combination steel swing rear doors – two-leaf, asymmetrically split, can be swung open 270° and locked in place (not fold-down), with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bar lock and central locking; deactivation function for automatic rear wall opening when tipping backwards with open swing door * 4 mm steel floor plating * Two-step entry on front left side * Mounting rail at rear for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * 4 x 3 t recessed lashing rings on each side in outer frame ----Loading Ramps: * Recessed compartment for ramps at the rear of the chassis * 1 pair of aluminum loading ramps (10 t/pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear posts, front bulkhead, tipper body, underrun protection, folding rear supports hot-dip galvanized * Sideboards painted in a RAL color of choice (no special or metallic paints); can be changed up to approx. 6 weeks prior to completion * Axles, air tanks, flange towing eye, and front support winch painted in black ----Info: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * TPMS Tire Pressure Monitoring System Nodpfx Aeu I Iqxelaolb * EBS braking system * Drum brakes * BPW axles * Parabolic leaf springs * Front support winch * Rear spring-assisted square tube supports with base plate and safety locking pin for variable support heights * Drawbar with 40 mm screw-type towing eye (height-adjustable by mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made from torsion-resistant square tubes and cross members * Closed steel mudguards with splash protection * Closed lateral underrun protection, usable as advertising surface * Plastic toolbox with base insert (installed horizontally), approx. 500 x 350 x 400 mm * Swiveling cable drum support structure, clear width between drum arms 1,700 mm – with tension latch for drum securing at the support arm ends, as well as central claw-locking mechanism for securing the drum frame to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed control and brake for drum drive * Steel drum shaft with 76 mm diameter, including centering and rotatable ends * 1 pair of polyamide centering cones, stepped design * Hydraulic power pack with diesel engine * Fuel tank and hand starter * 6.5 HP engine with gear pump (150 bar) * Surface: hot-dip galvanized * New vehicle with full manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 8.800 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System Nodpfx Aou I Iqlolajlb * EBS braking system * Drum brakes * BPW axles * Parabolic springs * Support winch at the front * Spring-assisted square tube support legs at the rear with base plate and safety locking pins for adjustable support heights * Drawbar with 40 mm screw-type towing eye (height adjustable in mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and crossmembers * Enclosed steel fenders with splash protection * Enclosed side underrun protection, also suitable as advertising space * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * Swivel-mounted cable drum assembly, interior width between drum arms 1,700 mm – with tension lock for drum securing at the ends of the support arms and central claw lock for securing the cable drum assembly to the chassis * Motor-hydraulic drum drive with oil motor * Valves and movable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft, 76 mm diameter with centering and rotating ends * 1 pair of polyamide centering cones, stepwise offset * Hydraulic power pack with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) * Surface hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Support winch at the front * Spring-assisted square tube supports at the rear with base plate, safety locking pins for various support heights * Drawbar with 40 mm bolted towing eye (height-adjustable mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made of torsionally stiff square tubing and cross-members * Enclosed steel mudguards with splash protection * Enclosed side underride guard, can be used as an advertising space * Plastic toolbox with floor liner (laying installation) approx. 500 x 350 x 400 mm * Swiveling cable drum construction, clear width between drum arms 1,700 mm, with tension latch for drum securing at the carrying arm ends as well as a central claw lock for connecting the cable drum frame to the chassis Nlsdou I Iqropfx Alajb * Motor hydraulic drum drive with oil motor * Valves and movable, rubber-coated drive rollers * Hydraulic speed regulator and brake for the drum drive * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 1 pair of polyamide centering cones, stepped design * Hydraulic power unit with Loncin petrol engine, includes manual and electric starter * Fuel tank and manual starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS Braking System * Drum Brakes * BPW Axle * Parabolic Springs * Front Support Wind Jack * Rear Square Tube Supports with Spring Assist and Base Plate, Safety Lock Pins for Adjustable Support Heights * Drawbar with 40 mm Screw-Type Towing Eye (height-adjustable mm) * 15-pin Electrical Connector * LED Lighting * Flashing LED Side Marker Lights * Chassis Made of Torsion-Resistant Square Tubes and Cross Members * Closed Steel Mudguards with Splash Protection * Closed Side Underrun Protection, Usable as Advertising Space * Plastic Toolbox with Bottom Insert (installed lying down) approx. 500 x 350 x 400 mm * Swiveling Cable Drum Superstructure, width between drum arms 1,700 mm – with tension lock for drum securing at support arm ends as well as a central claw lock for securing the cable drum superstructure to the chassis * Motor-Hydraulic Drum Drive with Oil Motor * Valves and Adjustable Rubber-Covered Drive Rollers * Hydraulic Speed Controller and Brake for Drum Drive * Steel Drum Shaft with 76 mm Diameter as well as Centering and Rotatable Ends Nlsdpfx Alou I Iq Esajb * 1 Pair of Stepped Polyamide Centering Cones * Hydraulic Pump Unit with Diesel Engine * Fuel Tank and Hand Starter * 6.5 HP with Gear Pump (150 bar) * Hot-Dip Galvanized Color * New Vehicle with Full Manufacturer Warranty * Subject to errors and prior sale * Immediately available ex Egestorf * Sample images

Koşul: yeni, azami yük ağırlığı: 6.870 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS Brake System * Drum Brakes * BPW Axle * Parabolic Springs * Front Support Winch * Spring-assisted square tube supports at the rear with baseplate and safety locking pins for different support heights * Drawbar with 40 mm bolt-on towing eye (height adjustable, mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubular steel and cross members * Enclosed steel mudguards with splash protection * Enclosed side underrun protection, suitable as advertising space * Plastic toolbox with floor insert (installed lying down), approx. 500 x 350 x 400 mm * Swiveling cable drum structure, light width between drum arms 1,700 mm, with clamp lock for securing the drum at the ends of the support arms, as well as central claw lock for fixing the cable drum structure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated friction rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, with centering and rotating ends * 1 pair of stepwise graduated centering cones made of polyamide * Hydraulic pump unit with Loncin petrol engine, including hand and electric starter * Fuel tank and hand starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * Unladen weight 2,690 kg Nlsdpfx Alsu I Iqfoaeb * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Available immediately ex Egestorf * Sample images

Koşul: yeni, azami yük ağırlığı: 6.900 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Support windlass at the front * Spring-assisted square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm screwed towing eye (height adjustable mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and crossbeams * Closed fenders made of sheet steel with splash guards * Closed side underrun protection can be used as an advertising area * Plastic toolbox with base inlay (horizontal installation) approx. 500 x 350 x 400 mm * Swiveling cable drum frame, clear width between the drum arms 1,700 mm with tension latch for drum securing at the support arm ends and a central claw lock securing the drum frame to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive Nedsxyniwjpfx Alajlb * Steel drum shaft with 76 mm diameter, centering and rotating ends * 1 pair of stepwise offset centering cones made of polyamide * Hydraulic lines supply and return * Chassis and hydraulic preparation for retrofit of a separate engine * 315/80 R 22.5 tires * Unladen weight: 2,690 kg * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and intermediate sale excepted * Immediately available ex Egestorf

Koşul: ikinci el, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2017, bir sonraki muayene (TÜV): 05/2026, yükleme alanı uzunluğu: 6.250 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Ek bilgiler 400 mm aşağıya katlanabilir yan paneller - Yan panel yaylı kaldırıcı - Sökülüp takılabilir arka panel - Büyük bağlama paketi Nlsdpfx Aloy Hn D Reasb - Yükleme alanı delikli ray - Ön yükseklik ayarlı destek ayağı - Arka katlanabilir destek ayakları - Plastik alet kutusu - BPW dingiller - Yaylı ızgara rampalar