Kullanılmış Stas S300Zx / 2 Liftachsen satın al (48.660)

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2013, süspansiyon: hava, lastik boyutu: 385/65/22.5, renk: diğer, Üretim yılı: 2013, Donanım: ABS, = Diğer opsiyonlar ve donanımlar = - Havalı süspansiyon = Ek bilgiler = Aks konfigürasyonu Lastik ölçüsü: 385/65/22.5 Aks markası: SAF Frenler: Disk frenler Süspansiyon: Havalı süspansiyon Arka aks 1: LM jantlar Arka aks 2: LM jantlar Arka aks 3: LM jantlar Ağırlıklar Boş ağırlık: 5.530 kg Yük kapasitesi: 33.470 kg Azami toplam ağırlık (zGG): 39.000 kg Nledpfoyxf Idex Alaob Bakım, geçmiş ve durum APK (teknik muayene): 10.2026'ya kadar onaylı Hasar: yok Kimlik Plaka: QALH523

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.636 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.300 mm, yükleme alanı hacmi: 60 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for especially high stability and strength. Aggregated chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc brakes 22.5" Nljdpfx Alofakkcsajb Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment), 1st and 3rd axle separately liftable with starting aid (without tractor equipment), 3rd axle also with Optiturn, ECAS air suspension, Wabco TrailerPulse tire pressure monitoring with ZF wheel-mounted sensors. Tyres and Wheels 6 wheels with 385/65 R 22.5 tires according to manufacturer’s choice, Alcoa aluminum rims Dura-Bright, 11.75x22.5 ET 120, kingpin screwed into a 10 mm thick plate. Landing Gear Aluminum drop supports, 2 x 10 ton support load, pivoting feet used for air suspension. Brake System According to E.G. standard, dual-line braking system, EBS E-system Wabco with RSS (Roll Stability Support), spring-loaded brake system acting on two axles with control at the rear, aluminum air tank system, premium modulator. Electrical System According to STVZO guidelines with 2 LED five-chamber lights, Aspöck Europoint LED type, integrated in the aluminum rear, 24-volt system with 1 x 5-pin and 2 x 7-pin sockets, with side marker lights in LED version, 2 separate LED work lights at the rear, 2 LED work lights at the height of the first landing gear, 1 LED work light inside front left, operable from outside. Body/Tipper “Fully welded interior construction” Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN; aluminum tipper body, 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper flange, plank profiles fully welded on the inside. Floor designed as a moving floor system on 140 mm ALU crossbeams, floor load approx. 7 t/m², crossbeams closely spaced (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in straight execution, special ALU corner profiles beveled, smooth rear wall in straight execution with two ALU swing doors 50/30 mm thick with 4 rotary bolt locks, welded in ALU rear frame, mounted in Teflon and stainless steel bearings. Movable ALU wall suspended in reinforced upper flange with "Kevlar tarpaulin for complete emptying," side brush seal, and additional kevlar side tarpaulin. Integrated discharge funnel with folding cover plate at the floor closure, operable from outside at the left rear. Viewing window rear left, 1 sampling slider each in the rear doors (total 2), service door front left. Hydraulic System "Cargo Floor moving floor system in the floor with hydraulically operated ALU profiles on aluminum square profiles with approx. 670 PE-HD sliders supported, floor thickness approx. 6 mm. Hydraulics with approx. 200 mm stroke, fixed portions at front wall, separate connection option for hydraulic line beneath vehicle with fixed halves, line size NW 21, fixed halves of to-be-specified size and design. Operating pressure 190, max 240 bar. Aluminum end pieces welded into the floor. Electric operation at rear left, with cable operation in a lockable, waterproof box. Accessories PVC mudguards with rubber mud flaps, ALU spare wheel holder, foldable ALU underrun protection, one plastic tool box approx. 800x460x430 mm, approx. 3.7 m aluminum ladder, roll tarp 680 g/m² quality with roll ta

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2007, yükleme alanı uzunluğu: 7.600 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 1.400 mm, süspansiyon: hava, lastik boyutu: 385/65r22,5, dingil mesafesi: 1.250 mm, Üretim yılı: 2007, Tyre size: 385/65 R22.5 Suspension: Air suspension Drive: Wheel Unladen weight: 5,300 kg Payload: 33,700 kg Njdeyx Dgxjpfx Alaelb Gross vehicle weight (GVW): 39,000 kg Body manufacturer: STAS Tipping mechanism: Rear tipper

Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Y2SR8X20005456818, kilometre: 185.070 km, güç: 360 kW (489,46 bg), ilk tescil: 08/2017, yakıt türü: dizel, boş ağırlık: 33.620 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 8x2, bir sonraki muayene (TÜV): 10/2026, yakıt: dizel, frenler: retarder, renk: beyaz, şoför kabini: yataklı kabin, vites türü: yarı otomatik, emisyon sınıfı: Euro 6, süspansiyon: hava, koltuk sayısı: 2, toplam uzunluk: 9.870 mm, toplam yükseklik: 3.700 mm, yükleme alanı uzunluğu: 3.950 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.100 mm, Üretim yılı: 2017, çalışma saatleri: 2.239 h, silindir hacmi: 12.742 cm³, direk tipi: teleskopik, inşaat genişliği: 2.550 mm, Donanım: ABS, UVV güvenlik kontrolü, araç içi bilgisayar, buzdolabı, diferansiyel kilidi, ek farlar, hava yastığı, hidrolik, hız sabitleyici, is filtrasyon filtresi, kablo vinçi, klima, koltuk ısıtıcı, navigasyon sistemi, park ısıtıcısı, retarder, spoiler, tır çekici bağlantısı, vinç, çekiş kontrolü, LOCATION: D - 73230 Kirchheim unter Teck -- 4-axle SCANIA with PALFINGER PK 165.002 TEC G + PJ 240 E DPS-C crane Registered as a "Self-propelled work machine - mobile crane" Nljdjxn Sp Repfx Alaeb First registration: 31.08.2017 VIN: YS2R8X20005456818 -- CHASSIS Scania R 490 8x2 Weight specification: 9,000 kg / 9,000 kg / 12,700 kg / 8,300 kg Permissible total weight: 34,000 kg as per registration / 39,000 kg (technical) Unladen weight: 33,620 kg Gross combination weight: 70,000 kg Front axles: air-suspended, rated 2 x 9,000 kg Rear axle: air-suspended, rated 12,700 kg, longitudinal & transverse diff-locks Trailing axle: air-suspended, rated 8,300 kg, steering Suspension: multiple ride heights via air suspension Engine: 360 kW (490 HP) / EURO 6 emissions standard Transmission: automated 12-speed gearbox, I-Shift control Retarder: present Tyres: Front tyres 385/65 R22.5 | Rear tyres 315/80 R22.5 | Trailing axle tyres 385/65 R22.5 Rims: Alcoa alloy wheels Trailer coupling: Ringfeder D 190 Nm, 40 mm pin + low-mounted ball head (3,500 kg) Wheelbase: 1,940 / 2,960 / 1,350 mm Cab: FH Globetrotter Driver’s air suspension seat, comfort spec Co-driver function seat Air conditioning Parking heater etc. -- CRANE MOUNT PALFINGER PK 165.002 TEC 7G | Jib PJ 240 E DPS-C Max. lifting capacity: 25,900 kg Reach: 18.50 m / 31.10 m Hydraulic main boom extension: 8 stages to 18.50 m / 5,700 kg Hydraulic jib extension: 6 stages to 31.10 m / 1,600 kg Incl. DPS-C system for increased load capacity on the fly jib Load hooks: 15 t and 30 t High performance with KTL coating -- WINCH Pulling force: 3.5 t single line, with overload protection Cable length: 120 m Cable diameter: 12 mm Manually foldable sheave » for cable between crane and jib -- OUTRIGGER SYSTEM comprising: - 4-way lateral (10,000 mm front, 8,500 mm rear) - Front outriggers hydraulically tiltable - Front stabiliser on cab -- FLATBED BODY - Dimensions: 3,950 x 2,540 x 500 mm - Rear extension mechanically extendable for loading area - Loading height: 1,100 mm - Payload per side: 2.5 t - Steel floor / anti-slip plywood - Lashing points 1000 da/N for load securing - Side walls in aluminium, foldable -- LIGHTING - 4 x LED on outriggers - 2 x LED on the rear - 2 x LED behind cab Further equipment details on request. German vehicle from first owner, excellent condition – immediately available from stock in Kirchheim unter Teck.

Koşul: ikinci el, azami yük ağırlığı: 32.950 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 10.450 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.100 mm, yükleme alanı hacmi: 54 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2024, Donanım: ABS, 3-axle Stas S 300CX Tipper Semi-Trailer VIN: 080246 Chassis / Attachments: * Air suspension / Raise + Lower function * 1st axle lift * Weweler landing gears * WABCO Smart Board * Alcoa aluminum rims * Tyres: 385/65 R22.5 * Remaining tyre tread: 1=90%, 2=as new, 3=90% * 3 x Jost axles with disc brakes * 2x PVC storage boxes * 2x work lights * ALU chassis Body: * Tipper semi-trailer * Hyva tipping cylinder max. 220 bar * Volume: approx. 54 m³ * 2x pneumatic locks * Rolling tarp * Front access platform * Portal doors 50:50 Weights: * Gross weight: 39,000 kg * Payload: 32,950 kg * Unladen weight: 6,050 kg Other: * German registration * Safety inspection valid until 06/2026 New main inspections / safety checks or weight downrating/uprating available upon request. We are happy to assist you in obtaining export/temporary registration plates; national delivery of your purchased vehicles within Germany is also available. Contact us! Nledeyl N N Djpfx Alaeb ---- We speak the following languages: German, English, and Russian! ---- No liability for printing & typographical errors, changes, prior sale, and mistakes reserved! ---- Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl on the Rhine. With many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge’s key strength is trading both new and used commercial vehicles. On 11,000 m², we offer a wide range of vehicles. Our company philosophy is characterized by fairness and integrity. Because customer satisfaction is our top priority, we provide an excellent all-round service package and will assign you a competent contact person to support you throughout the purchase or sale of vehicles. See for yourself! Our service for you: Vehicle loading We gladly assist you with the loading of your purchased vehicles. Arranging special transports We are happy to help you organize special transports. Day plates / Export license plates We can assist you in obtaining export or short-term registration plates. Handling customs formalities We are happy to help you with customs clearance.

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2013, yükleme alanı uzunluğu: 8.400 mm, yükleme alanı genişliği: 2.390 mm, yükleme alanı yüksekliği: 1.550 mm, süspansiyon: hava, lastik boyutu: 385/65R22,5, dingil mesafesi: 1.310 mm, Üretim yılı: 2013, Tire size: 385/65R22.5 Suspension: Air suspension Drive: Wheel Nlsdpfx Alewzkx Teasb Unladen weight: 5,590 kg Payload: 33,410 kg Gross vehicle weight (GVW): 39,000 kg Body manufacturer: STAS Tipper: Rear

Koşul: ikinci el, makine/araç numarası: YE6SZ339V600R0459, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2006, yükleme alanı uzunluğu: 13.350 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.750 mm, toplam uzunluk: 13.950 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 4.000 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: diğer, Üretim yılı: 2006, Donanım: ABS, = Additional Options and Equipment = - Hydraulics Nlodjyq R Ryjpfx Alasb = Remarks = Chassis Chassis height: 100 cm Coupling pin / drawbar height: 120 cm Structure Hydraulics: ✓ Tank Fuel: ✓ = Additional Information = Axle Configuration Tyre size: 385/65 R22.5 Axle brand: Mercedes Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 65%; Tyre tread right: 10% Axle 2: Tyre tread left: 75%; Tyre tread right: 15% Axle 3: Tyre tread left: 70%; Tyre tread right: 15% Weights Unladen weight: 7,960 kg Payload: 31,040 kg GVW: 39,000 kg Functional Body brand: Stas Loading platform height: 110 cm Identification Registration number: QAZ297 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Koşul: ikinci el, boş ağırlık: 7.910 kg, azami yük ağırlığı: 31.090 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2018, süspansiyon: hava, lastik boyutu: 385/65 22,5, lastik durumu: 40 yüzde, renk: gümüş, Üretim yılı: 2018, ön lastik ölçüsü: 385/65 22,5, arka lastik boyutu: 385/65 22,5, şoför kabini: gündüz kabini, emisyon sınıfı: hiçbiri, Donanım: ABS, kamyon kaydı, Reference number for inquiries: 40573 Stas, S 300CX * Year of manufacture: 2018 * ABS (Anti-lock Braking System) * Air suspension * Lift axle * Air coupling head (red + yellow) * 15-pin connector plug * Lifting and lowering device * Storage box / toolbox * Aluminum tipping body * Access platform * Roll-up tarpaulin * Grain discharge slider * Suspension: air * Gross vehicle weight: 39,000 kg * Unladen weight: 7,910 kg * Payload: 31,090 kg * Permissible total weight: 39,000 kg * Tire condition, 1st axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition, 2nd axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition, 3rd axle: 50% -- 50% - Tire size: 385/65 R22.5 * Tire size: 385/65 R22.5 * Wabco SmartBoard * Rear support * Wear plates, right & left * Folding underrun protection Disclaimer: Subject to change, prior sale, and errors excepted. You can find additional photos and videos on our website. Nodpfeyicqyjx Alaolb Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering export license plates / customs plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please consult our trained staff; we will be happy to advise you.

Koşul: yeni, azami yük ağırlığı: 30.050 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.664 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 52 m³, Üretim yılı: 2025, Braking System: * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Disc brakes * Brake pad wear indicator (not connected) Axles: * 3 x 9 t SAF axles * 1st and 3rd axles are automatic lift axles, controlled via the EBS-E system Suspension: * Air suspension with raise/lower system (automatic lowering during tipping—can be manually locked via SmartBoard—as well as via switch on the chassis) Electrical / Lighting: * Tire pressure monitoring system (Wabco Trailerpulse) * Wabco SmartBoard * Starting aid is activated via button in the truck—without truck-side installation—as well as by pressing the brake pedal three times * 2 x 7-pin and 1 x 15-pin sockets * Aspöck LED lighting * 2 LED reversing lights (switched via reverse gear) * 1 LED work light on each side near the landing legs General Attachments: * Aluminum air tanks * Weweler crank landing gear * Side underrun protection * Foldable underrun guard with handle * Speedline Diamond aluminum rims * 1 x plastic toolbox on the left (approx. 860 x 520 x 500 mm) * Air pressure gun with 16 m hose reel in the toolbox * Closed plastic individual mudguards * 1 dust bag incl. bracket on the right side * 3 m aluminum access ladder stored on the right above the mudguards * Shovel and broom holder on the left above the mudguards * Loading pressure gauge mounted at the front of the chassis * Access steps and standing platform mounted at the front of the frame Chassis: * Aluminum chassis frame Tipping Body: * Aluminum rear tipper body—rectangular—with smooth side walls * Hyva hydraulic ram, 250 bar * Straight 4 mm aluminum front wall * Access steps on the inside left front wall of the body * Smooth inner and outer sidewalls * Double-walled 600 mm side wall profiles—30 mm thick—3 mm inside, 2 mm outside * Side wall profiles are continuously welded on the inside; 90° corners formed by right-angled profile between floor and side walls, enabling full utilization of loading width * Top rail 90 mm wide * 6 mm wear-resistant aluminum floor, 110 Brinell quality * Combination double-wing rear doors—straight mounted with double hinges and reinforcement profiles, each with a grain chute and all-round rubber seal * When open, doors are secured with chains, allowing them to rest almost flush against side walls * 4-point door locking hooks at the bottom, automatically released during tipping—can be pneumatically locked via lever on the frame Rollcover: * Rollcover—RAL 9005 deep black—with 3 side tensioning straps * Trapezoidal tarpaulin support, 150 mm high, at front wall and rear flap Loading Volume: * Loading volume: 51.8 m³ Nlsdpfxowgg Uzs Alaob Fifth Wheel Height: * Fifth wheel height: 1,150 mm Information: * Body and chassis painted with acrylic paint in RAL 9005 deep black * --Technically permissible gross weight of 39,000 kg-- * New vehicle, unregistered, full manufacturer’s warranty * Errors and prior sale reserved Delivery Time: * Immediately available ex Egestorf

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2008, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Two fully automatically welded T-profiles (width 200 mm) Corrosion protection between steel and aluminium parts, continuous rubber strip pressure-bonded to the longitudinal members, maximum stability via integrated tipping shaft with wear-resistant, pressed-in special bushings, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit Axles and Suspension, Disc Brakes Jost-disc axle units 3 x 9 tonnes with DCA air suspension, lift and lower valve, load gauge, 3rd axle automatically liftable Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 50-60% tread on silver steel rims, 11.75x22.5 ET 120 Landing Legs Mechanical support legs, load capacity 2 x 20 t, swing feet used for air suspension Brake System According to E.C. standard, two-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E system 2S/2M, with RSS (Roll Stability Support), ALU air tank Electrical System According to StVZO regulations, with two 5-chamber Aspöck LED tail lights, 24 Volt system with two 7-pin and one 15-pin socket at the front, EBS socket, with LED side marker lights, 2 clearance lights, 2 separate LED reversing lights Tipping Body / Dump Bed ALU dump body, side walls with welded vertical aluminium profiles, floor approx. 6 mm in highly wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall angled design in 4 mm ALU with reinforcing profiles for hydraulic cylinder mounting, side walls in 3 mm hard alloy, straight rear wall, automatic pneumatic (lockable) universal tailgate with pendulum and 2/3-1/3 barn door configuration, double hinge, made from 4 mm thick aluminium, 1 grain chute with water protection, wear plates fitted on side approx. 400-1,000mm x 3,000mm x 4mm Hydraulic System Hydraulic cylinder mounted at the front wall, operating pressure 150 bar, brand Edbro, with approx. 2 m hydraulic hose and 1" quick-release coupling Accessories Nodpfexf Spfox Alaolb 6 Parlok plastic mudguards with 2 Stas splash guards, 3 m aluminium ladder, reinforced and foldable underrun protection with 2 towing eyes, one foldable side underrun guard, catwalk on front wall with access ladder (left side), 3 swivelling ALU bows, 1 central additional bow holder, rolling tarp with aluminium tube in centre, rolling tarp system, approx. 660g/m² quality, tarp fastener with quick-action lock (no lashing straps), wheel brace, 2 chocks, toolbox type 800, continuous splash flap on underrun guard, etc. Offer and images are subject to prior sale/change.

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2017, yükleme alanı uzunluğu: 10.550 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 50 m³, Chassis light version Aluminium (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width approx. 1,600 mm Nlsdpfjxf Sn Isx Alasb Axles and Suspension Disc brakes 430 mm "Off Road Version" SAF Intradisc axle units 3 x 9 t with SAF air suspension, central air bag arrangement next to the chassis longitudinal beams, 1st axle liftable with drive-off aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with trailing steering, electrically lockable, Tyres and Wheels 6 wheels fitted with 385/65 R 22.5 tyres, approx. 40-50 % tread remaining, with Alcoa aluminium rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminium rims Landing Gear Mechanical version with single-side operation, 2 speeds, with swing foot for air suspension, 2x20t static load capacity Braking System According to E.C. standards, twin-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E including RSS (Roll-Stability-System), Wabco Smartboard info center, aluminium air reservoir system Electrical System According to StVZO regulations, with 2 five-chamber lamps type Aspöck Ecopoint 2, 24-volt system with 2x7- and 1x15-pin sockets, with lateral outline marker lights, 2 separate LED reversing lights at the rear. All air and electrical lines neatly installed in plastic tubing. Tipping Body/Bin Body, fully welded interior Aluminium bin, side walls made of 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded, floor 8 mm thick high wear-resistant alloy (5383H34/HB 110), bulkhead 4 mm reinforced in straight version, rear wall as double swing doors in straight version with 2 half/half doors each with a grain chute, pneumatic floor vibrators underneath, rear hanger made of aluminium, swing-out, two hold-downs with rubber buffers on the tipper bin attached to the frame at the bulkhead, Hydraulic System Tipping cylinder with "cardan" mounting, 7,630 mm stroke Hydraulic cylinder mounted to the bulkhead, working pressure 220 bar, make Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48° Accessories 6 Parlok mudguards, full-width spray flaps fitted to underrun protection, aluminium spare wheel holder, foldable lateral underrun protection right-hand side, large 860-type toolbox, approx. 3 m aluminium ladder, 3 mid-position, approx. 150 mm raised swing bars, rolling tarp with central light strip and separate reinforcements at wear points, approx. 660 g/m² quality, with rolling tarpaulin system, perimeter rubber cord in rear end of tarp with two tension hooks to fix onto the rear swing bar, catwalk on bin with access on left, side tarp lock with tensioning straps, rear tarp closure with welded-in rubber cord for water resistance, robust foldable aluminium underrun guard with two towing eyes left and right including locking pins, 2 "Clear-Pass" spray flaps on the mudguard to EC standard, etc. Offer and images non-binding.

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2021, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.200 mm, yükleme alanı hacmi: 53 m³, Chassis, Lightweight Version Made of aluminum (15-6-12) Two fully-automated, welded I-beams longitudinally, with welded cross members. Chassis width: 1,600 mm Axles and Suspension: 430 mm disc brakes, 'Off-Road Version', SAF Intradisc Light axle units, 3 x 9 t with SAF air suspension, centrally aligned with the chassis longitudinal member, 1st axle liftable via air bags with starting aid and manual forced lowering, SmartBoard info center, Hebert lowering valve, front load pressure gauge Wheels and Tires on Aluminum Rims 6 wheels with 385/65 R 22.5 tires, approx. 50% tread, wheels 11.75 x 22.5 ET 120, UNI wheel bolts for alloy rims Kingpin 2” screw-in on an 8 mm thick 'light' mounting plate Landing Legs Support winches, each with 20 t capacity, swing foot for air suspension Brake System According to EC standards, dual-line Wabco system, spring-loaded parking brake acting on two axles, and Wabco EBS-E incl. RSS (Roll Stability System), Wabco SmartBoard Info Center, aluminum air tank system Electrical System According to German Road Traffic Licensing Regulations (StVZO), with 3 round triple-chamber Aspöck tail lights, 24-volt system with 2x7-pin and 1x5-pin sockets, 2x7 side marker lights, 2 centrally mounted LED reversing lights, 1 round fog lamp, 4 LED work lights, 1 interior LED light, 4 red LED position lights in rear door frame All air and electrical lines are properly laid in plastic conduits! Tipper Body / Tipping Body, "Smooth Construction" Body internally fully welded, aluminum tipping body, 30 mm thick plank profiles (2-3 mm), 600 mm wide welded side panels, 8 mm thick highly wear-resistant floor alloy (5383H34/HB 110) with 90° profile to side wall, 4 mm reinforced, straight front wall, universal straight rear door with two half-and-half swing doors and a grain chute, universal door automatic pneumatic operation with separate lockable lever, swingable ALU rear hoop, two hold-downs with rubber buffers on the tipper body fixed to the front wall frame. Hydraulic System—Tipping Cylinder with "Cladding" Mounting Hydraulic cylinder mounted on front wall with working pressure of 150 bar, Edbro brand, with approx. 2.5 m hydraulic hose and loose end 1”, tipping angle appx. 48° Accessories 6 Parlok mudguards, full-width splash guard mounted on underrun protection, no spare wheel holder, foldable aluminum side underrun protection (right), large Type 860 toolbox, approx. 3 m aluminum ladder, 3 central aluminum swing hoops, approx. 150 mm raised, additional mid mount, roll tarp with central skylight and extra reinforcement in wear areas, quality approx. 660 g/m², roll tarp system with quick-tension closure, all-round rubber rope at rear with two tension hooks to fasten on rear swing hoop, walkway on the frame, rear tarp edge has welded-in rubber cord for water protection, robust foldable underrun guard, 2 "Clear-Pass" spray flaps on the mudguard (EU standard), ALU grain funnel with dust sack fixed to the side of the frame, holders for shovel, broom, and scraper above the axles, etc. Unladen weight: 5,950 kg Offer and images non-binding. Nodpfoyiw T Eox Alaolb

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 93 m³, Chassis Version with reinforced continuous frame, newly manufactured superstructure in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high in reinforced design (for high ground load capacity), additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to the support assembly (trailer construction max. 39,000 kg). Axles and Suspension "Disc brake 22.5" Nljdpfx Ajyh S Aijlaeb Jost (DCA) axle assemblies, 3x9 tonnes with DCA air suspension, raise and lower function, Wabco Smartboard infotainment center, electronic brake lining wear indicator (BVA) readable in the tractor unit (display), first axle with start-up aid (new EU regulation, without tractor unit equipment) (optional: 1st and 3rd axle liftable). Tyres and Wheels 6 wheels fitted with tyres size 385/65 R 22.5 of manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Landing Legs Mechanical landing gears with two speeds, 2x 20 tonnes load capacity with swivel foot. Brake System In accordance with EU standard; EBS electronic system Wabco with RSS (Roll-Stability-Support) and premium modulator, spring-loaded parking brake system operating on two axles with controls at the rear, ALU air reservoir system. Electrical System According to the guidelines of EU standard 91/633 and 97/28, with 2 five-chamber lamps type Aspöck Europoint 3 integrated into the aluminium rear cover, 24 Volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the underrun protection. Superstructure / Tipper Body "Body fully welded inside" Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower chord, plank profiles fully welded inside, floor as moving floor system mounted on 140 mm ALU crossmembers, forklift floor load approx. 9 t/m², crossmembers closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in chamfered design, smooth rear wall in straight design with 2 ALU swing doors 50/30 mm thick, with 2 locking bars locked in a welded ALU rear frame, mounted with Teflon and Inox bearings, doors secured when open with one chain each side, reinforced wear plates on the side walls approx. 2,000x1,500x4 mm, fully welded, moving residue discharge wall with Kevlar tarp approx. 1,800 mm long plus side Kevlar tarp seals, service door in front wall with ladder folding inward. Hydraulic System "Cargo Floor" Moving Floor System Moving floor system in floor with hydraulically operated ALU profiles on ALU box section profiles with approx. 880 PE-HD sliding blocks plus anti-lifting sliding bearings, Type CF 10 mm floor version, hydraulic stroke approx. 200 mm working travel, fixed ends on front wall, separate option for connecting hydraulic lines under the vehicle with fixed couplings, line size NW 21, fixed couplings with size and type to be specified, operating pressure 190–max. 240 bar, ALU end pieces welded in moving floor, electronic controls rear left with radio control integrated in lockable waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps,

Koşul: yeni, azami yük ağırlığı: 28.320 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.750 mm, yükleme alanı hacmi: 92 m³, Donanım: ABS, Chassis: Constructed with a continuous frame, newly manufactured in a self-supporting aluminum (ALU) design featuring appropriate reinforcements in the lower flange for exceptional stability and strength. Crossmembers are 140mm high and reinforced (for high floor load capacity). Additional reinforcement via gusset plate in the front lower flange/vehicle frame area. Chassis from galvanized steel up to the support structure. Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton with DCA air suspension, lifting and lowering functions, Wabco Smartboard info center, electronic brake wear indicator BVA readable in the tractor unit (display). First axle with traction assist (new EC regulation, without tractor unit installation). Optionally, first and third axles liftable as per MP request. Tyres and Wheels: 6 wheels with tires, size 385/65 R 22.5 as per manufacturer's choice (Br-Go-Co), on silver steel rims, size 11.75x22.5 ET 120. King Pin: 2" bolted into a 10mm thick plate. Landing Legs: Mechanical landing gears with two speeds, 2x 20-ton support load, swing foot. Brake System: According to E.C. norms, EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles, controlled from the rear, ALU air reservoir system. Nledpfxofi Nmwj Alasb Electrical System: According to EC Norm 91/633 and 97/28 with two five-chamber rear lamps, Aspöck Europoint type, integrated in ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets. LED side marker lights, two reflective plates at the rear, front position lights (2x white), rear position lights (2x red), two separate halogen reversing lights integrated in underrun protection. Superstructure/Body: Interior fully welded. Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls of 30mm thick ALU plank profiles (2-3mm), 600mm wide, fully welded with upper and lower flange. Plank profiles fully welded inside. Floor with moving floor system laid on 140mm ALU crossmembers, forklift load approx. 9 t/m2. Crossmembers at approx. 350mm spacing for dense mounting. Special ALU corner profiles in chiseled design. Smooth rear wall, straight design, with two ALU swing doors, 50/30mm thick, with two rod locks mounted in a welded-in ALU rear frame with Teflon and stainless-steel bearings. Doors secured in opened position with lateral chains. Hard wear plates on side walls (approx. 2000x1500x4mm), fully welded. Mobile residual discharge wall with Kevlar tarpaulin, approx. 1800mm long plus lateral brushes with Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System: Moving floor system in the floor with hydraulically operated ALU profiles on ALU square profiles with approx. 880 PE-HD sliding elements and additional anti-lifting slide bearings, Type CF 10mm floor version. Hydraulic stroke approx. 200mm. Fixed ends at the front wall. Separate hydraulic connection possibility under the vehicle with fixed halves, pipe size NW 21. Fixing half with size and design to be specified. Operating pressure 190-max. 240 Bar. ALU end sections welded into the moving floor. Electric control rear left with remote integrated in lockable watertight box. Without hydraulic hoses. Accessories: 6 PVC mudguards with 2 anti-spray flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, foldable side ALU underrun protection, one toolbox approx. 860x460x400

Koşul: yeni, YENİ ARAÇ ve stokta Steinsberger'den 2 at kapasiteli Azami toplam ağırlık 3500 kg Tandem aks Tavan kapağı 1x Aygır Bölme Duvarı + Kapaklı eyer dolabı + Alüminyum jantlar + Renk: Porsche Tebeşi ile ekstra şeritler Yaşam bölümü + Yaşam bölümünde ısıtma + Yedek lastik, askıya monte edilmiş + Akü ve şarj cihazı Nedpfxsyh Hiqj Alajlb + Duş için ani su ısıtıcısı + Lavabo + Dolaplar + Mikrodalga + Buzdolabı + Oturma köşesi + Altta su deposu 1x Katlanır yatak 1x Dönüştürülebilir yatak Katlanır merdiven Ön pencere At bölümünde pencere Alüminyum jantlar Alüminyum zemin Kauçuk zemin Dışarıda 220V bağlantı KDV gösterilebilir

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2000, Stas S 3SA 334K Üretim yılı: 2000 3 dingilli Havalı süspansiyon Branda 2 x destek ayağı Nodpeydb R Rsfx Alajlb Boş ağırlık: 5.260 kg Azami toplam ağırlık: 38.000 kg = Ek Bilgiler = Boş ağırlık: 5.260 kg

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, renk: gri, Üretim yılı: 2000, Stas S 3SA 334K Nljdpfx Asyda Tdslasb Üretim yılı: 2000 3 akslı Havali süspansiyon Branda 2 adet destek Boş ağırlık: 5.260 kg Azami yüklü ağırlık: 38.000 kg = Ek bilgiler = Boş ağırlık: 5.260 kg Taşıma kapasitesi: 32.740 kg Azami yüklü ağırlık: 38.000 kg

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2001, Stas S3 SA334K Üretim yılı: 2001 Nsdpfx Aljyda E Hoajlb 3 dingil Havalı süspansiyon Branda 2 x destek Boş ağırlık: 5.260 kg Azami toplam ağırlık: 39.000 kg = Ek bilgiler = Boş ağırlık: 5.260 kg Yük kapasitesi: 33.740 kg Azami yüklü ağırlık: 39.000 kg

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, renk: gri, Üretim yılı: 2008, Donanım: ABS, Stas S 339 CX Üretim yılı: 2008 Havalı süspansiyon 3 dingil Branda 2 x destek ayağı Yarım daire damper Nlodpfsydavxjx Alasb = Ek Bilgiler = Boş ağırlık: 6.800 kg Yük kapasitesi: 32.200 kg Azami toplam ağırlık: 39.000 kg

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2008, Stas S 339 CX Model yılı: 2008 3 dingil Njdpfxsyc U Uas Alaolb Havalı süspansiyon Branda 2 x destek ayağı Boş ağırlık: 4.890 kg Azami toplam ağırlık: 39.000 kg = Daha fazla bilgi = Boş ağırlık: 4.890 kg Yük kapasitesi: 34.110 kg Azami toplam ağırlık: 39.000 kg

Koşul: ikinci el, azami yük ağırlığı: 32.550 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2016, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 1.500 mm, yükleme alanı hacmi: 30 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.350 mm, Donanım: ABS, Stas S300CX İlk tescil: 25-08-2016 Alüminyum şasi/çelik kasa SAF akslar, disk frenli, ABS ve EBS'li Havalı süspansiyon Smartboard Nljdpfeyf Sf Usx Alaob Seri numarası: YE6S300CXG0001112 Lastikler: 385/65 R22,5 %35 Toplam ağırlık: 39.000 kg, Boş ağırlık: 6.450 kg, Yük kapasitesi: 32.550 kg Katlanabilir arka alt koruma Kasa: U-8,50 m, G-2,35 m, Y-1,50 m = 30 m³ ADR onayı için üretilmiştir Hatalar, yazım yanlışları ve ara satış hakkı saklıdır.

Koşul: yeni, azami yük ağırlığı: 28.240 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.820 mm, yükleme alanı hacmi: 91 m³, Donanım: ABS, Stock no. 5559 New vehicle in stock – available immediately! Purchase, rental, or rent with a purchase option upon request! Side tarpaulin retrofit available for an additional charge! Stas 91 m² moving floor / 10 mm flat floor / TÜV load certificate ---- Nlsdpfx Aljv Emk Usasb * Manufacturer: Stas * Model: BIOSTAR – Walking Floor trailer * First registration: – (New vehicle) * Color: Galvanized chassis, body in RAL 7016 silver grey, tarpaulin SIO 7340 * Volume: approx. 91m³ (13.50m long x 2.475m wide x 2.64m to 2.82m high) * Gross weight: 36,000 kg * Unladen weight (according to registration): 7,760 kg * Payload: 28,240 kg * Axles: 3x SAF axles / 1st axle liftable / starting aid / disc brakes * Tires: 385/65 R22.5 new on Speedline Diamond aluminium rims * Wheelbase: 7.85 m * Suspension: ECAS air suspension with raise and lower function * ABS / EBS * Cargo Floor CF 500 SL-C with remote control and control box rear left * 21 flat floor boards, 10 mm * 12 pairs of retractable lashing rings in the floor * Welded aluminium end caps * Complete emptying partition with brushes and stainless steel handles * Service door in front wall * Swing doors (50/50) with pneumatic locking * 2x locking bars * Swivelling rear cross member at door closure * Hydraulic connections at the front with 3 m hoses and * Connection possibility beneath the body without hoses * Operator platform with ladder front left * Fifth wheel height: 1,150 mm * Single mudguards * Full load landing legs * Rear aluminium underride guard (one piece, foldable) * Rolling tarpaulin (900g/m²) with tensioning straps * Steel roof bows, foldable and longitudinal lashing straps * 1x tool box rear left * 1x aluminium ladder, 3.80 m long * Load pressure gauge * Smartboard * TPMS tire pressure monitoring system * Aluminium rear buffer * 1x extendable ladder at the rear right * 2x LED work lights in front of axles * 2x LED reversing lights at the rear * 1x LED work light inside front wall * 2 x 3 function lights in upper rear door cross beam New vehicle in stock – available immediately! Purchase, rental, or rent with purchase option upon request! Note regarding possible errors in the ad: Despite careful preparation, occasional errors in text or specifications cannot be ruled out. We accept no liability for mistakes, changes, or prior sale. All information provided without guarantee. Please contact us to verify details or for further questions.

Koşul: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 56 m³, Donanım: ABS, Chassis light version In aluminium (15-6-12) Two fully-automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm Axles and Suspension 430 mm disc brakes Jost (formerly Mercedes DCA) axle assemblies, 3 x 9 t with air suspension, centrally mounted air bellows aligned to the longitudinal beams, first axle liftable with starting aid and manual forced lowering, Smart Board Infocenter, raise-lower valve, BVA brake wear indicator Tyres and Wheels 6 wheels with tyres size 385/65 R22.5 from leading manufacturers (manufacturer's choice), steel rims 11.75 x 22.5 ET 120 Landing Legs Mechanical design, single-sided operation, 2-speed, pivoting foot for air suspension Brake System According to E.G. standards, dual-line Wabco system, spring-loaded parking brakes acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System) and Premium Modulator, Wabco Smartboard Infocenter, aluminium air tank system Electrical System According to StVZO guidelines with 2 Aspöck Ecopoint 2 five-chamber lights, 24 Volt system with 2x 7-pin and 1x 5-pin socket, with side marker lights, 2 separate LED reversing lamps at rear, 1 LED headlight inside Tipping Body/Body Full Interior Welding Aluminium tipping body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide fully welded, floor 8 mm high-wear alloy (5383H34/HB 110), front wall 4 mm reinforced, straight design, rear wall as universal door in straight design with 2-leaf doors (2/3-1/3 split) and one grain chute (alternatively 1/2-1/2 split, each with a grain chute), aluminium round profile welded to seal the door gap on sides and bottom of rear doors, rear doors partially smooth-panelled in aluminium, universal door operation automatic pneumatic with separate lockable lever, rear canopy in ALU, pivotable, two hold-downs with rubber stops attached to tipping body frame at front wall Hydraulic System Tipping Cylinder with Large Casing Hydraulic cylinder front-mounted, max. working pressure 150 bar, manufacturer Edbro, approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories Nlodpfxefi Nmuj Alajb 6 Parlok mudguards, complete spray flaps across entire vehicle width attached to underrun protection, ALU spare wheel holder, right side underrun protection foldable, large toolbox Type 860, approx. 3 m aluminium ladder, 3 centre-pivot ALU hoops raised by approx. 150 mm, additional central hoop mount to hold up to 2 hoops for larger loading width, roll tarp with central light strip and separate reinforcement at wear areas, approx. 660 g/m² quality with roll tarp system, circumferential rubber cord at rear tarp edge with two hooks at rear pivot hoop, catwalk on frame in chassis colour, tarp closure with quick-release fastener, rear tarp end welded-in rubber seal against water ingress, robust foldable underrun guard with two optional towing eyes left & right incl. safety pins, 2 'Clear-Pass' spray flaps at mudguards (EG standard), ALU grain funnel with plan sack mounted on frame side, holders for shovel, broom and scraper mounted above axles, etc. + €590 delivery charge Available in 50m³ – 56m³ Load compartment length: 9,700 mm and 10,500 mm * Price varies depending on equipment

Koşul: yeni, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.750 mm, yükleme alanı hacmi: 92 m³, Donanım: ABS, - Panama floor 900g - 10 mm floor thickness - V-sheets 2000x1500x4 - Service door on the front wall - 12 pairs of lashing rings in the front wall Chassis: Reinforced continuous chassis, new superstructure manufactured in self-supporting design with appropriate reinforcements in the lower chord for particularly high stability and strength, 140 mm high cross members in reinforced design Axle and suspension Disc brakes 22.5, Jost axle assemblies, 3 x 9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA), first axle with traction help (without tractor unit equipment) Tyres and wheels 6 wheels with 385/65 R 22.5 premium tyres (manufacturer optional) mounted on steel rims, 11.75x22.5, ET 120 Nljdpfx Alsfi Nmpeasb Landing legs Mechanical landing gears, 2 x 20 t support load Brake system EBS E-System by Wabco with RSS system (Roll Stability Support) and premium modulator, spring-loaded brake system acting on two axles, operated from the rear Electrical system According to EC directives 91/633 and 97/28, with 2 Aspöck Europoint five-chamber lamps integrated in the aluminium rear end, 24V system with 1 x 15-pin and 2 x 7-pin sockets, LED side marker lights, 2 separate LED reversing lights integrated in the underrun protection Superstructure / Tipper body Superstructure fully welded inside, reinforced side walls. Aluminium tipper body, side walls made of 30 mm strong aluminium plank profiles (2-3 mm wall thickness), 600 mm wide, fully welded with lower and upper chord, plank profiles fully welded on the inside. Aluminium front wall with 600 mm plank profile, 2-3 mm wall thickness, straight design, with 2 aluminium swing doors 50/30 mm thick, with sliding residual discharge wall with Kevlar cover approx. 1,500 mm length, plus side Kevlar curtain seal Hydraulic system: 'Cargo Floor' moving floor system Moving floor system in the body floor with hydraulically actuated aluminium profiles, mounted on aluminium square profiles with approx. 880 PE-HD sliding elements, CF type 8 mm floor design, fixed sections at the front wall, separate hydraulic line connection under the vehicle with fixed sections, operating pressure 190 - max. 240 bar, aluminium end pieces welded in the moving floor, without hydraulic hoses Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 1 aluminium spare wheel holder, side aluminium underrun protection in foldable design, 1 plastic toolbox approx. 860x460x400 mm, 3.7 m aluminium ladder, tarpaulin approx. 660g/m^2 with tarpaulin system incl. rolling slat, optional with side tension belts or quick release, catwalk on front wall with access ladder, 3 steel hoops with swing-out and lockable fastener, aluminium protective cover with foldable hinges for lighting, etc. +590€ delivery cost Unladen weight: approx. 7,700 kg Offer and photos non-binding

Koşul: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.500 mm, yükleme alanı hacmi: 87 m³, Chassis Manufactured using self-supporting aluminum construction with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregate chassis made of aluminum, 140 mm frame height (max. 39 t), axles and suspension with disc brakes 22.5”, Jost axle units 3 x 9 tonnes with DC air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle can be lifted separately with start-assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with tyres size 385/65 R 22.5 (manufacturer’s choice) on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel version + approx. 120 kg). Landing gears Aluminum drop leg landing gears, make: Alu-Leg, 2 x 10 t support load, for air suspension we use swivel feet. Brake system According to E.E.C. standard, dual-line brake system, Wabco EBS E-System with RSS (Roll Stability Support), spring-actuated parking brake acting on two axles with control at the rear, aluminum air reservoirs, premium modulator. Nodjgcw Rispfx Alaolb Electrical system According to StVZO regulations, with two five-chamber lights type Aspöck Europoint III integrated into the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin sockets, with LED side marker lights, 2 work headlights at the rear, 2 LED work headlights at the sides at the height of the landing gears, 1 LED work headlight inside front left operable from outside. Body/tipper body — "Body fully welded inside" Bulkhead load 17,250 daN, rear and side walls 10,250 / 13,400 daN, aluminum tipper body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, fully welded with bottom and top chords, plank profiles fully welded inside! Floor as moving floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 7 t/m², closely spaced crossmembers (approx. 350 mm), aluminum bulkhead with 600 mm plank profile, 2-3 mm thick in straight design, special aluminum corner profiles in chamfered design, smooth rear wall in straight design with 2 aluminum swing doors 50/30 mm thick with 4 locking bars, fitted in a welded aluminum rear frame, mounted on Teflon and stainless steel bearings, traveling aluminum wall suspended from reinforced upper aluminum chord with "Kevlar tarp" for complete emptying, lateral brush sealing and additional Kevlar tarp at the sides, integrated discharge funnel with foldable cover plate at the rear left floor edge and operable from outside, inspection window at rear left, one sampling slider per rear door (total 2), service door on left in bulkhead. Hydraulic system "Cargo Floor" 24 board system — smooth version! Moving floor system in the base with hydraulically driven aluminum profiles on aluminum box profiles, fitted with approx. 880 PE-HD slide elements, approx. 8 mm floor thickness, hydraulic system with approx. 200 mm working stroke, fixed halves at bulkhead, separate possibility for connection of hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves to be specified in size and design, operating pressure 190–max. 240 bar, aluminum end pieces welded into the floor, actuation at the rear left with cable remote in a lockable waterproof box, without hydraulic hoses. Accessories PVC fenders with rubber splash guards, aluminum spare wheel holder, foldable aluminum side underrun protection, 1