Yürüyüş zemini

STAS Schubboden 13.50 "BioStar"

-Panama tarpaulin 900g
-10 mm floor
-V-sheets 2000x1500x4
-Service door on the front wall
-12 pairs of lashing eyes in the front wall
Biptkgkg0M


Chassis: reinforced design with continuous chassis, new body manufactured in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross member 140 mm high reinforced design

Axle and suspension ?disk brake 22.5?
Jost axle units, 3*9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard, BVA electronic brake wear system, 1st axle with starting aid (without SZM equipment)

Tires and wheels
6 wheels with 385/65 R 22.5 premium tires Ww. on steel rims, 11, 75*22.5 ET 120

Seat post
mech. landing gear, 2x20 to drawbar load

Brake system
EBS E-system Wabco with RSS system
(Roll Stability Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear

Electrical system
According to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the ALU rear end, 24 volt system with 1*15 pole and 2*7 pole socket, with side clearance lights in LED design
2 separate LED reversing lights integrated in the U-guard,

Body/body: ?body fully welded inside? reinforced side walls? Side walls
Aluminum body, side walls 30 mm thick ALU plank profiles
(2-3 mm) 600 mm wide, completely welded in with top and bottom chord, fully welded tarpaulin profiles inside, ALU front wall with 600 mm tarpaulin profile 2 - 3 mm thick in straight design, with 2 ALU hinged doors 50/30 mm thick, with running residual emptying wall with Kevlar tarpaulin approx. 1,500 mm long plus side panels with Kevlar ? tarpaulin seal

Hydraulic system: ?Cargo ? Floor? Moving floor system
Moving floor system in the floor with hydraulically moved ALU ? profiles
on ALU ? square profiles with approx. 880 PE-HD sliders, type CF 8 mm floor version, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, operating pressure 190 - max. 240 bar, ALU ? End pieces welded into the moving floor, without hydraulic hoses

Accessories:
6 PVC ? mudguards with 2 anti-spray mud flaps,
1 ALU E ? wheel holder, side aluminum ? collision protection in hinged design, 1 tool box approx. 860*460*400 mm in plastic, 3.7 m aluminum ladder, roller tarpaulin approx. 660 gr./m2 with roller tarpaulin system incl. roller slat ww. with side tension belts or with quick-release fastener, walkway on the front wall with access, 3-steel bows with locking mechanism can be swung out and locked, aluminum protective cover with hinges can be folded down for the lighting, etc....

+590¤ Transfer costs

Unladen weight: approx. 7,700 kg

Offer and pictures subject to change

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.