Kullanılmış Wiese 3-Achs-Tieflader Mit Rampen Und Radmulden satın al (42.962)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Egestorf
2.485 km
Römork
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Çağrı
Koşul: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 Cable Drums (Cable Reel Mounts)
----Braking System:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
Hjdox Nlkaepfx Actsl
----Suspension:
* 17.5" air suspension with raise/lower control
----Drawbar:
* Drawbar, 1,800 mm long, with 40 mm towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display capability on the truck dashboard via EBS signal (no installation required on the truck side)
* 15-pin power connector
* 2 additional LED reversing lights (activated via reverse gear)
* LED lighting
----General Attachments:
* Aluminum air tank
* Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm
* Side underrun protection
* Plastic quarter mudguards
* Rear underrun protection
----Flatbed:
* "Zurr-fix" outer frame, 45° bent, with drilled hole pattern for lashing points, lashing capacity per point: 2,000 kg at 480 mm spacing
* Option to install 3,000 kg folding lashing rings at approx. 600 mm spacing – 12 pcs 3,000 kg lashing rings included per side
* 5 pockets per side for stake tubes 100 x 50 mm in the outer frame – stakes themselves not included in delivery
* 30 mm phenolic resin-coated plywood floor
----Cable Drum Mounts (Drum Supports):
* 3 galvanized cable drum mounts secured by container locks with lateral forklift pockets, center-to-center 800 mm (pocket width 185 mm)
* Max. drum diameter 2,600 mm and max. drum width 1,650 mm
* Clear width between support arms approx. 1,775 mm, with crossbar
* 6,000 kg drum weight per cable drum mount
* Without drive system and drum brake
* Support arm with clamping latch to secure drum shaft
* Steel drum shaft, 76 mm diameter, with centering and rotating ends
* 2 clamping rings
* 2 centering cones made from polyamide
* 4 pcs 3.2 t lashing eyes on the support arms for customer-provided securing against drum rotation and unwinding
----Loading Height:
* Approx. 1,040 mm when loaded
----Paintwork:
* Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized
* Axles painted in black
Küçük ilan
Egestorf
2.485 km
Römork
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Çağrı
Koşul: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum supports
----Braking System:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with lift and lower facility
----Drawbar:
* Drawbar 1,800 mm long with 40 mm towing eye
----Electrics / Lighting:
Hjdjx Nlkgopfx Actel
* Tyre pressure monitoring with display capability in the truck dashboard via EBS signal -no truck-side installation required-
* 15-pin power connector
* 2 additional LED reversing lights (switched via reverse gear)
* LED lighting
----General Attachments:
* Aluminium air tank
* Side-mounted stainless steel toolbox approx. 1,000 x 300 x 600 mm
* Side underrun protection
* Plastic quarter mudguards
* Underrun protection
----Platform:
* Zurr-fix outer frame, 45° angled with hole pattern for lashings, lashing capacity per point 2,000 kg at a distance of 480 mm
* Option for installation of 3,000 kg drop lashing rings at intervals of approx. 600 mm - delivery includes 12 each side, 3,000 kg lashing rings-
* 5 pockets each side for stake posts 100 x 50 mm in the outer frame - stake posts are not included in delivery-
* 30 mm phenolic plywood floor
----Drum Supports:
* 3 galvanized drum brackets, secured via container locks, with side forklift pockets, center/center 800 mm (width of pockets 185 mm)
* Max. drum diameter 2,600 mm, max. drum width 1,650 mm
* Internal width between support arms approx. 1,775 mm, with cross brace
* Max. drum weight per support 6,000 kg
* Without drive and drum brake
* Support arm with locking device for securing drum shaft
* Steel drum shaft, 76 mm diameter, with centering and rotating ends
* 2 locating rings
* 2 centering cones made of polyamide
* 4 x 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding
----Loading Height:
* Approx. 1,040 mm loaded
----Paintwork:
* Chassis, turntable, drawbar, outer frame, underrun protection hot-dip galvanized
* Axles painted in black shade
----Information:
* Technical GVW upgrade to 30 t possible
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Available from week 28/2026
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Tele-Semi m. hydr. Rampen-nlla.
Çağrı
Koşul: yeni, boş ağırlık: 10.700 kg, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r 17,5, renk: gri-siyah, Donanım: ABS, Gooseneck:
• Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10°
• 3 pairs of lashing rings
• 30 mm thick hardwood floor
Extendable loading platform:
• Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8°
• Cut-outs in the outer frame of the loading platform for securing straps
• Approx. 48 mm thick hardwood covering, checker plate covering over the axles
Two-part steel ramps:
• One pair of galvanized, two-part steel ramps with approx. 48 mm thick hardwood covering
• Ramp sections fold in and out hydraulically, with hydraulic lifting system and hydraulic lateral adjustment
• Maximum load per pair: approx. 40,000 kg
Axles and tires:
• BPW axles and suspension, 2 rigid axles, 1 self-steering axle
• Technical axle load: 12,000 kg
• Electromagnetic reversing lock, activation via reverse gear and manual operation
• Air suspension with lift and lower valve
• Axle tools
• 235/75 R 17.5 3PMSF
Braking system:
• WABCO braking system according to EU regulations with EBS-E
Painting:
• First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer
• High-quality 2-component top coat, single color in MB 7350 Novagrey
• Rear section metallized and painted in RAL 9010
Landing legs:
• JOST landing legs with 2-speed gearbox for 24t lift capacity (50t test load)
Steel construction:
• Steel construction made of high-strength fine grain steels
• Steel grades:
• S355J2+N/S355MC
• S690QL/S700MC
Electrical system:
• Electrical system according to EU requirements, 24 Volt lighting
• ASPÖCK UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets
Included accessories:
• One spare wheel with holder
• One galvanized steel headboard approx. 400 mm high
• Yellow-red air couplings on the galvanized connection panel at the front
• 4 wheel chocks
• Bracket for rotating beacon at the rear of the trailer
• Holder at rear of gooseneck for ALU approach ramps
• Galvanized folding supports under the rear chamfer of the loading platform
Hjdpfx Acjhlz S Njtol
• Cover plates for bridging the gap between ramps and loading platform
• White reflector tape to EU specifications on the sides, extension, and red at rear
• Electro-hydraulic unit mounted at the rear, under the loading platform
• On both sides of the gooseneck and ramps, holders for warning panels with socket
• Control valves for the ramps mounted on the right trailer side
• ALU sideboards and tailboard on the gooseneck approx. 2,440 x 400 mm
• Rear, galvanized removable stakes (body length approx. 2,560 mm)
• Four approx. 400 mm extendable warning boards with position light
• 3 pairs of WADER container locks in deck for 20ft, 30ft, or 40ft container
• 6 pairs of stake pockets (100x50 mm) in the outer frame of the loading platform
• Galvanized extensions, extendable by approx. 230 mm per side
• 20 x 20 mm square climbing strips every 200 mm on the outer frame of the rear chamfer of the loading platform
• Anti-slip sand coating on checker plate surfaces above kingpin and loading platform
• Load pressure gauge for axle load measurement including load chart
• HRM metallization (High Resistance Metallisation) of the outer frame
• Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) and hot finished.
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
Faymonville3-Achs-Semi-hydr.Ladeboden-Rampen-Gitter
Çağrı
Koşul: yeni, boş ağırlık: 10.900 kg, azami yük ağırlığı: 37.100 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, işletme ağırlığı: 10.900 kg, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear with approx. 1,000 mm x 6° chamfer
- Technical fifth wheel load: 18,000 kg
- For tractor units: 4 x 2 and 6 x 2
Loading Platform:
- Loading area, approx. 9,600 mm long, with chamfer at the rear approx. 900 mm x 6°
- Loading area behind the gooseneck hydraulically raiseable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg
- Grating surface and approx. 5 mm steel plate as additional reinforcement on the chamfered section of the loading area
Ramps:
- One pair of two-piece AXS steel ramps, approx. 4,675 mm long, approx. 900 mm wide
- Grating surface
- Hydraulically folding ramp tips
- Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 365 mm inwards
- Painted sand coating on the outer frame of the ramp as well as on the ramp tip
- Flashing lights on the outer side of the ramp tips with switch next to the ramp control
- Ramp locking in transport position with quick-release fastener
Axles, Suspension and Tyres:
- BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle self-steering
Hjdpfxouadk No Actel
- 1st axle with starting aid
- Operated via the brake pedal of the tractor unit
- Technical axle load: 12,000 kg
- Air suspension with lift and lower valve
- 235/75 R 17.5
- TPMS tyre pressure monitoring system according to ECE R 141
- TPMS tyre pressure sensors fitted on all wheels including spares
Brake System:
- WABCO EBS-E braking system according to EU regulations
Paintwork:
- Trailer painted MB 7350 Novagrau grey
Accessories Included:
- Plug-in steel front wall, approx. 400 mm high
- 3 kW electric hydraulic power pack for controlling hydraulic operations, except hydraulic winches
- Guide plate from gooseneck for the fifth wheel plate, approx. 500 mm wide
- JOST Module B – static test load = 50,000 kg
- Continuous grating surface with 5 mm steel plate underneath as additional reinforcement
- Painted sand coating
- Cut-outs in the outer frame of the loading platform and lifting bed for attaching hydraulic ramp control valves on the right side of the vehicle
- 2" king pin
- Central lubrication system with one pump, brand BEKAMAX
- On gooseneck, 1 pair of plug-in side ALU folding walls, approx. 400 mm high, anodized
- Electric cable winch, approx. 5,400 kg pulling force, with radio remote control
- Steel rope approx. 24 m long, rope ø approx. 9.5 mm, incl. rope press roller
- WABCO Smart Board system
- 4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
Faymonville4-2+2-Achs-Tele-Semi m. Radmulden u. Rampen
Çağrı
Koşul: yeni, boş ağırlık: 13.500 kg, azami yük ağırlığı: 51.500 kg, toplam ağırlık: 69.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r17.5, renk: gri, Donanım: ABS, Gooseneck:
Gooseneck in SNT design for optimization of loading area length, length approx. 3,700 mm
Gooseneck rear with bevel approx. 1,000 mm x 10°
Loading Area:
Telescopic loading area, length approx. 8,800 mm, with rear incline approx. 500 mm x 10°
Recess in the incline and extending into the loading area for accommodating the excavator dipper stick
Pneumatic locking with conical pin and reinforced locking positions
The supply lines are protected within the extendable beam and adjust to the respective loading area length
Ramps:
1 pair of two-piece steel ramps, approx. 4,350 mm x 900 mm
Hydraulically folding ramp tips
Ramps can be hydraulically adjusted individually approx. 235 mm outwards and 215 mm inwards
Axles and Suspension:
BPW axles and suspension, two fixed axles, two steering trailing axles
Electromagnetic reverse lock activated via reverse gear and manually
Air suspension with lifting and lowering valve
Axle tool
Tyres: 235/75 R17.5 3PMSF twin tyres
Load index: 143/141J (144/144F)
Brake System:
WABCO brake system, EBS-E according to EU regulations
Lighting System:
24-volt lighting system, “ASPÖCK-NORDIK full LED”
Metallization:
Standard HRM metallization of the external frame
Complete steel structure shot blasted, subsequently visible defined surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-finished
Steel Structure:
Steel grades:
S355J2+N/S355MC (yield strength 355MPa)
S690QL/S700MC (yield strength 690MPa)
Welders certified according to DIN-EN 287-1
MAG welding process according to EN ISO 4063
Shielding gas M21 according to EN ISO 14175
Included accessories:
Removable steel front wall, height approx. 400 mm
ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets
24N connection according to ISO-1185
24S connection according to ISO-3731
15-pin connection according to ISO-12098
Round NATO socket on the front connection strip
Cable for supplying the electro-hydraulic pump and/or electric winch (35 mm², 3.5 m long) between trailer and tractor unit with plug (NATO-NATO)
3 kW electro-hydraulic unit for controlling hydraulic operations (except for hydraulic winches)
1 spare wheel with mounting adapter
External beams on the gooseneck with mounting holes for bolt-on lashing rings, first hole approx. 200 mm from the front, then approx. every 400 mm
2 pairs of screw-in lashing rings included
Mounting hole on the upper rear of the gooseneck external beam for a screw-on lashing ring
1 pair screw-in lashing rings
Approx. 40 mm thick hardwood floor above gooseneck
On the gooseneck, 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized
On the gooseneck, one plug-in aluminium rear wall, approx. 400 mm high, anodized
2" king pin
Hedpfx Ask Ahugoctsl
Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide
4 wheel chocks with holders
Provision for aluminium approach ramps
Mechanical landing gears with 2-speed gearbox and crank
On the loading area, continuous hardwood floor approx. 50 mm thick, interrupted only between the axles
Load area locking with conically welded positioning profiles every 250 mm including pre-tension plate
Slotted holes at the front of the loading area for attachable and repositionable bridging plates
1 intermediate table with recessed loading area, approx. 300 mm wide, for the large cross-section sliding tube with sheet metal covering
Front and rear with longe...
Küçük ilan
Dortmund
2.568 km
Düşük yükleyici
FaymonvilleMAX Trailer 4-Achs-Tele-Semi mit Rampen, zwgl.
Çağrı
Koşul: yeni, boş ağırlık: 13.250 kg, azami yük ağırlığı: 47.550 kg, toplam ağırlık: 60.800 kg, dingil konfigürasyonu: 3 aks, süspansiyon: hava, lastik boyutu: 245/70 r17.5, renk: gri, Donanım: ABS, Gooseneck:
Gooseneck with rear taper approx. 750 mm x 10°.
3 pairs of lashing rings
30 mm thick hardwood flooring
Extendable loading platform:
Extendable loading platform with rear taper approx. 1,000 mm x 8°
5 pairs of outward-folding lashing rings
3 pairs of outward-folding lashing rings
1 pair of horizontal lashing rings at the front of the loading platform
Cutouts in the outer frame of the platform for attaching tension straps
Approx. 48 mm thick hardwood flooring, checker plate over the axles
Two-piece steel ramps:
One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood decking.
Ramp with hydraulically folding ramp sections, hydraulic lift mechanism, and hydraulically adjustable. Maximum load per pair: 40,000 kg
Landing legs:
JOST landing legs (mechanical) with two-speed gearbox for 24 t lifting capacity (50 t test load)
Axles and tires:
BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced-steered
Technical axle load: 12,000 kg
Air suspension with lift and lower valve
Axle tool
Tires 245/70 R 17.5
Brake system:
Braking system according to EU regulations with EBS-E (4S3M) without connection lines to the tractor unit
Steel structure:
Steel structure made of high-strength fine-grain steels
Steel qualities:
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)
Paintwork:
First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer
High-quality two-component (2K) topcoat in single-tone Nova Grey
Rear section metallized and painted in RAL 9010 (pure white)
No metallic paint possible
Electrical system:
Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting
ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets
Connections according to ISO:
24N ISO-1185
24S ISO-3731
15-pin ISO-12098
Accessories included:
2" king pin
Galvanized steel front wall approx. 400 mm high
Yellow-red air couplings at the galvanized front connection bar
4 wheel chocks with holder at the front wall
One spare wheel with holder in front of the front wall
Electro-hydraulic unit
Remote steering front and rear via cable remote control with push buttons and single-track axle alignment control
Mount for ALU loading ramps at rear section of the gooseneck
European reflector boards (red-yellow) at the rear of the trailer
White reflector tape as per EU regulations on the side, extension and rear Red at the rear
At the gooseneck and ramps, one holder left and right for warning signs including socket
Beacon holder at the rear of the trailer
Galvanized folding support legs under the rear ramp of the loading area
Control valves for ramps located on the right side of the trailer
Cover plates to bridge the gap between ramp and loading platform
One mud flap at the rear of the trailer
Manual and description on USB stick
Hjdsl Uxdkjpfx Actol
BEKAMAX (Pico) central lubrication system with standard NLGI-2 grease and removable protection for the pump
Plug-in ALU side and rear walls on the gooseneck approx. 2,440 x 400 mm
Rear galvanized plug-in posts are removable, superstructure length approx. 2,560 mm
One INOX toolbox 1,350x400x400 on the gooseneck, box covers oil fill plug
4 pairs of WADER container locks in the loading area for a
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Tiefbett mit Pendelachsen
Çağrı
Koşul: yeni, boş ağırlık: 17.500 kg, azami yük ağırlığı: 43.500 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 400 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimizing the loading platform length, approx. 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and removable
- For tractor units: 6x4 or 8x4
Lowbed:
- Lowbed with external beams, extendable version, “SUPER LOW” design, length approx. 7,550 mm
- Lowbed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking
- Supply lines routed protected inside the extendable beams and automatically adjust to the respective lowbed length
Rear running gear:
- Rear running gear with closed outer frame, chequer plate covering, and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at rear
- 2 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame
Axles and tyres:
- “PENDLE-AXLE”, all axles forced-steered by hydromechanics
- Burst protection valve on axle compensation cylinder with automatic RESET feature
- Hydraulic cylinders with shut-off valves and locking pins for securing in raised position
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- 245/70 R 17.5 tyres / 3PMSF
Accessories included:
- Prepared for mounting attachable container positions for 1x 20ft or 1x 40ft container on the outer beams
- 2'' king pin
- One galvanized steel front wall approx. 400 mm high
- One spare wheel with bracket
- At the galvanized front connection strip: yellow-red air couplings
- 4 wheel chocks
- Remote steering from front and rear by cable remote control with push buttons, including track alignment monitoring for the axles
- Hydraulic couplings from gooseneck to lowbed with multi-coupling system instead of screw couplings
- Electro-hydraulic unit
- White reflector tape according to EU regulations on the sides, extension, and red at the rear
- 2 wooden blocks 500x250x200 mm
- European reflector plates (red-yellow) at the rear of the trailer
- On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket
- Central lubrication system with 2 BEKAMAX (Pico) pumps for NLGI-2 standard grease
- Load pressure gauge to determine axle loads, including load chart
- On the gooseneck, plug-in ALU side and rear walls approx. 2,000 x 400 mm
- The rear galvanized plug-in posts are removable (body length approx. 2,120 mm)
- Separate air connection with air gun on the gooseneck
- Duomatic air coupling from gooseneck to lowbed
- Gooseneck closed at the rear upper section with a removable cover
- 1 pair of steel ramps to bridge the mountings of the lowbed
- Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm
- Radio remote control for the steering in addition to the cable remote, with indicator lights on receiver for track monitoring
Hedpfx Aeh Hm Thsctjl
- 6 pairs of threaded blocks between lashing rings under the top chord on the outer beam for mounting screwable RUD rings VLBG-4
- 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform
- Folding extensions, approx. 230 mm per side
- Anti-slip sand layer painted on the loading platform
- Dipper recess on the rear running gear closed at the front and rear with plug-in plates
- HRM metallization (High Resistance Metallisation) of the outer frame
- Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (Zinc 85% - Alu 15%)
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
FaymonvilleMAX Trailer 5-Achs-Tele-Semi mit hydr. Rampen
Çağrı
Koşul: yeni, boş ağırlık: 15.420 kg, azami yük ağırlığı: 61.080 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck:
Gooseneck with rear bevel approx. 750 mm x 10°
3 pairs of lashing rings
30 mm thick hardwood flooring
Load area:
Extendable load area with rear bevel approx. 500 mm x 8°
8 pairs of outward folding lashing rings
1 pair of flat-fitted lashing rings at the front of the load area
Recesses in the outer frame of the loading area for attaching tie-down straps
Approx. 48 mm thick hardwood flooring, checker plate covering above the axles
Two-piece steel ramps:
One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramp sections hydraulically lift and fold, hydraulically height-adjustable, and hydraulically shiftable. Maximum load per pair: 50,000 kg.
Landing legs:
• JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load)
Axles and tires:
BPW axles and suspension, 4th and 5th axles steering
Technical axle load: 12,000 kg
4th and 5th axles with electro-magnetic reverse lockout, activated via reverse gear and manually
Tires 235/75 R 17.5 3PMSF
Braking system:
Braking system according to EU regulations with EBS-E (4S3M)
Sockets and lighting:
Electrical system in accordance with EU regulations, lighting 24 volts
ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX at the front connector rail with sockets 24N, 24S & 15 pin
Connection compliant with ISO:
24N ISO-1185
24S ISO-3731
15 pin ISO-12098
Paintwork:
First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer
Hjdpfjl Sl Izox Actsl
High-quality 2-component (2K) topcoat, single color MB 7350 Novagrau
Rear part metalized and painted in RAL 9010 (pure white)
No metallic paint possible
Steel construction:
Steel construction made of high-strength fine-grain steels
Steel grades:
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)
Accessories:
One spare wheel with holder in front of bulkhead
2" kingpin
One galvanized steel front wall, approx. 400 mm high
Yellow-red air couplings mounted on the galvanized connector rail at the front
2 wheel chocks with holder on the front wall
Bracket at rear of gooseneck for ALU drive-on ramps
One holder for a rotating beacon at the rear of the trailer
Galvanized supports beneath the rear bevel of the loading area
White reflector tape according to EU regulations on the sides, extension, and rear in red
Electro-hydraulic unit at rear under the loading area
Mounts for warning signs with socket at the gooseneck and rear plate left and right
Ramp control valves fitted to right-hand side of the trailer
One mud flap at the rear of the trailer
Manual and documentation on USB stick
3.5" kingpin supplied loose
Plug-in ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm (LxH)
Rear galvanized drop-in stakes are removable (structure length approx. 2,560 mm)
3 pairs of WADER container pockets in the loading area for a 20' (30') or 40' container
6 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area
Galvanized extensions, extendable by approx. 230 mm per side
Lifting axle on the front axle with control via TEBS E, depending on the current axle load and current loading condition
Square cleats 20 x 20 mm every 200 mm on the outer frame of the loading area's bevel
On the checker plates, above the kingpin and the loa...
Küçük ilan
Dortmund
2.568 km
Platform
FaymonvilleMAX Trailer 3-Achs-Mega-Tele-Plateau-Radmulden
Çağrı
Koşul: yeni, boş ağırlık: 9.500 kg, azami yük ağırlığı: 35.500 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 435/50 R 19.5, renk: gri, işletme ağırlığı: 9.500 kg, Donanım: ABS, Loading platform in extendable design:
Loading platform with hardwood floorboards, rear chamfer approx. 1,000 mm x 8°
1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm
2 pairs of lashing rings (LC 5,000 daN)
1 pair of lashing rings (LC 10,000 daN)
6 pairs of folding external lashing rings (LC 5,000 daN)
2 pairs of folding external lashing rings (LC 10,000 daN)
Cut-outs in the outer frame of the loading platform for hooking in tensioning straps (LC 2,000 daN)
Braking system:
Braking system in accordance with EU regulations with EBS-E (2S2M)
Paintwork:
Premium, durable corrosion protection for the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer
High-quality single-color 2-component (2K) top coat in Novagrau
Rear section metallised and painted in RAL 9010 (pure white)
No metallic effect paint possible
Landing legs:
JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load)
Steel construction:
Steel construction made of high-strength fine-grain steels
Steel grades:
S355J2+N/S355MC (yield strength 355MPa)
S690QL/S700MC (yield strength 690MPa)
Electrical system:
Electrical system in accordance with EU regulations, 24 volt lighting
Sockets: 24N, 24S & 15-pin
Axles and tires:
BPW axles, air suspension, disc brakes (377 mm), with lift/lower function
The trailing steering axles can be locked for reversing by electro-magnetic control via reverse gear or manually
Axle tools
Tires 435/50 R 19.5
Accessories included:
At the front galvanized connection rail, yellow-red air couplings
4 wheel chocks with holders
2" king pin
Galvanized steel front wall, approx. 1600 mm high, EN12642-XL
White reflective tape to EU standards on the sides, on the extension, and red at the rear
Loading area with heavy-duty hardwood flooring
9 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform
1 spare wheel holder under the loading platform, right side of direction of travel
Galvanized drop-down supports under the loading platform chamfer
Sliding hook-in strips for ALU loading ramps at the rear of the vehicle
European reflective signs (red-yellow) at the rear of the trailer
A mudflap at the rear of the trailer
A bracket for a rotating beacon at the rear of the trailer
Hedpfx Ajk Eammectol
On the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket
1 HDPE toolbox 620x360x610 under the loading platform, left side of direction of travel
4 pairs of WADER container locks in the loading platform for 1x 20ft container or 1x 40ft container; the extension is prepared with an additional locking position for a 45ft container
3 pairs of crosswise stake pocket strips mounted in the loading platform for 100 x 50 mm plug-in stakes
Lift axle on the front axle with control via TEBS E depending on current axle load and load status
Speed stickers 80 km/h at the rear and on both sides
Four warning panels, extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light. Each warning panel with a bracket for revolving beacon
Load gauge for determining axle loads including load chart
HRM metallization (High Resistance Metallisation) of the outer frame
Complete steel construction shot-blasted, then the defined visible surfaces are metallised
Küçük ilan
Wiesmoor
2.630 km
Alçak şasi römork
FLIEGLVTS 400 Tieflader mit Radmulden Luft/ Hydr.
Çağrı
Koşul: yeni, azami yük ağırlığı: 30.310 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, NEW VEHICLE Fliegl 4-axle low loader with 2 pairs of wheel recesses and ramps
Total weight: 40,000 kg
Payload: 30,310 kg
Unladen weight: 9,690 kg
Overall length: 12,000 mm
Loading length: 10,000 mm
Load bed: 7,150 mm including 850 mm drive-up slope
Loading height: 900 mm
1st pair of wheel recesses after drop in the load bed, length at bottom approx. 1,600 mm, 400 mm deep
2nd pair of wheel recesses between the axles in the load bed, length at bottom 600 mm, 300 mm deep
Extensions to 3,000 mm, warning signs, beacon,
Comprehensive lashing package
5 pairs of stake pockets in the outer frame
Excavator boom recess 1,800 mm long, 150 mm deep
Drawbar 50 mm
Air suspension with lifting and lowering valve, can be operated separately
BPW drum brakes
Tyres: 235 / 75 R 17.5"
Axle load detection via EBS CAN bus signal, Trailer Info Center
Hodpfx Aenzlg Dsctjl
Ramps 2,800 mm x 750 mm with hydraulic operation
Hydraulic lateral shifting
Hire-purchase offer: 48-month term, residual value 40%, down payment only VAT on the rental instalments, monthly instalment EUR 970.00 net
Vehicle available from 11/09/2023 from the Neumünster trade fair.
Visit us at Nordbau - Stand West 121, right next to the main entrance.
Other 3-, 4- and 5-axle low loaders new and used available immediately.
Küçük ilan
Petershagen
2.512 km
Alçak şasi dorse
Wiese Stufensattel Tieflader mit Kran Fassi F545
Çağrı
Koşul: yeni, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 12.300 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Wiese 2-axle step frame extendable semi-trailer with Fassi F545RA.2.26 crane
Mega Lowliner in step frame design.
Chassis
Welded construction with cross members, made entirely of high-grade steel
Neck construction reinforced for front-mounted crane
Hsdpoyihgyefx Actel
Axles
2 BPW axles, each with 10,000 kg load capacity, 17.5" drum brakes
ABS: 1 axle with sensor
Axle spacing: 1,810 mm
Both axles with forced steering
Tyres
8x type 235/75 R17.5
Rims
Aluminum rims, 10-hole, hub-centric, ET= 122 mm
Lighting system
24V lighting system in accordance with EU Directive 76/756/EEC and subsequent amendments, with:
2x2 LED three-chamber tail lights
1x LED reversing light
1x LED fog light
LED side marker lights
Lane marker lights
Number plate illumination
2x 7-pin sockets + 1x 15-pin socket, connected according to EU standard
Floor
Anti-slip phenolic plywood floor
Steel chequer plate in the axle area
Load securing
Outer frame with lashing hole profile D30 mm in the bevel
2x12 lashing points 8,000 daN in the outer frame
3x combi stanchion pocket rows for 80x80 mm stanchions in the low-bed section
Accessories
2x wheel chocks with holders
Spare wheel holder with winch
2x toolboxes with drawers (for chains)
etc.
Crane:
Fassi F 545 RA.2.26 XE-Dynamic
Hydraulic outriggers
Additional stabilizer beam
360° working area
Approx. 100% lifting capacity to the front
The attached images are sample photos.
We manufacture crane trailers in various configurations.
For further information, please do not hesitate to contact us.
We are happy to provide a specification-based quotation on request.
Küçük ilan
Nürnberg
2.232 km
Düşük yükleyici
Humbaur3-Achs-Tieflader HTD 30 LIGHT PARABELFEDERUNG
Çağrı
Koşul: yeni, boş ağırlık: 6.000 kg, azami yük ağırlığı: 24.000 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.540 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: çelik, lastik boyutu: 235/75 r17,5, Üretim yılı: 2026, Donanım: ABS, merkez döner tabla, 3-AXLE HUMBAUR LOW-LOADER TRAILER
INCLUDES: 3 PAIRS OF 6-TON LASHING POINTS IN THE OUTER FRAME
=> HOT-DIP GALVANIZED CHASSIS FRAME
=> HOT-DIP GALVANIZED TURNTABLE FRAME
=> HOT-DIP GALVANIZED RAMPS
=> 10 UNITS 10-TON LASHING POINTS
=> 10 UNITS 3-TON LASHING POINTS, OUTER FRAME
=> 8 UNITS 2-TON LASHING POINTS, ABOVE WHEELS
Hjded U A Tgepfx Actsl
=> SPRING-LIFTING MECHANISM FOR RAMPS
=> 40 MM DIAMETER TOWING EYE
=> RAMPS APPROX. 2,700 MM LONG
=> RAMPS APPROX. 750 MM WIDE
=> TWIN TYRES 235/75 R17.5
=> LOADING HEIGHT WHEN LOADED ONLY APPROX. 860 MM
=> COUPLING LENGTH / B-LENGTH APPROX. 10,720 MM
=> FRONT CORNERS BEVELLED
=> TWO FOLDING SUPPORT LEGS AT REAR
=> AND MUCH MORE
=> Delivery freight: EUR 2.90 plus VAT per km
=> Prices ex works D-86368 Gersthofen
Your direct contact:
Mr. Hirn, Tel.
DOLL Fahrzeugbau
*Subject to prior sale and modifications!*
*Price valid ex works D-86368 Gersthofen*
*Sale to business customers only!*
*Images may differ and are for general reference only => may contain/show optional accessories at additional cost*
Küçük ilan
Nürnberg
2.232 km
Alçak yükleyici inşaat makineleri
Humbaur3-ACHS-TIEFLADER HTD 30-K V5
Çağrı
Koşul: yeni, boş ağırlık: 6.650 kg, azami yük ağırlığı: 23.350 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.540 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 r17,5 zoll, Üretim yılı: 2026, Donanım: ABS, merkez döner tabla, 3-axle low loader
=> Full air suspension (front and rear)
=> Hot-dip galvanized
Gross vehicle weight: 30,000 kg
Payload: approx. 23,350 kg
Chassis frame hot-dip galvanized by immersion bath
Air suspension
SAF axle with drum brake
EBS electronic braking system
Tyres: 235/75R17.5 – 12 units
Low-bed length: approx. 6,500 mm
3 pairs of 10 t lashing rings recessed in the low-bed
2 pairs of 10 t lashing rings recessed in the high-bed
4 pairs of 3 t lashing points on the outer frame
Hedpfxjhmm N Uj Actsl
3 pairs of 6 t lashing eyes on the outer frame
6 pairs of stanchion pockets 90 x 50 mm in the outer frame
Storage box front top on the platform, with folding lid
3-metre widening kit without chamfer, with folding outriggers
Spring ramp lifter
4 warning panels
Rotating beacon
Storage compartment under the loading area
1-piece ramps, approx. 3,150 x 750 mm
Softwood decking for loading area and ramps
Extras available if required:
Hydraulic ramp lifter €2,690.00 + VAT
=> Delivery freight costs: €2.90 plus VAT per km
=> Prices ex works D-86368 Gersthofen
Your direct contact:
Mr. Hirn, Tel.
DOLL Fahrzeugbau
*Subject to prior sale and modifications!*
*Price valid ex works D-86368 Gersthofen*
*Sale to business customers only!*
*Images may differ and are for general guidance only – may show/accessorize items at extra cost*
Küçük ilan
Petershagen
2.512 km
Çalışma platformlu yarı römork
Wiese Stufensattel Tieflader mit Kran Fassi F545
Çağrı
Koşul: yeni, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 12.300 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Wiese 2-axle low-loader flatbed semi-trailer with Fassi F545 crane
Mega Lowliner
Chassis
Welded construction with crossmembers, made entirely of high-quality steel
Neck height = approx. 220 mm including fifth wheel plate
Equipped with all necessary chassis reinforcements and cross braces
Axles
2 BPW axles, each with a 10,000 kg load capacity, equipped with 17.5" drum brakes
ABS: 1 axle with sensor
Axle spacing: 1,810 mm
Tyres
8 units, type 235/75 R17.5
Rims
Aluminum rims, 10-hole, hub-centric, ET = 122 mm offset
Lighting system
24V lighting system compliant with EU Directive 76/756/EEC et seq., featuring:
2x2 LED three-chamber tail lights
1x reversing LED spotlight
1x LED fog light
LED side marker lights
Lane indicator lights
Number plate lighting
2x 7-pin sockets + 1x 15-pin socket, wired according to EU standards
Floor
Galvanized grating in the lowbed area
Steel chequer plate at axle area
Load securing
Outer frame with D30 mm lashing hole profile on the slope
2x12 lashing points (8,000 daN) in the outer frame
3x rows of combi-stake pockets (80x80 mm) in the lowbed
Hsdpfxen Hrtge Actel
Accessories
2x wheel chocks with bracket
Spare wheel carrier with winch
2x toolboxes with sliding drawer (for chain storage)
Surface protection
Steel construction: shot-blasted and primed
Paintwork
Chassis/frame/subframe: single colour in RAL 3020 (traffic red)
Axle hubs: single colour in RAL 3020 (traffic red)
Axles: black KTL-coated
Rims: Alcoa Dura-Bright aluminum
With Fassi F 545 RA.2.28 XE-Dynamic
Hydraulic outriggers
Additional support beams
360° working range
Approx. 90% working capacity to the front
For further information, we are happy to assist you.
Küçük ilan
Petershagen
2.512 km
Alçak şasi dorse
Wiese Stufensattel Tieflader mit Kran Fassi F545
Çağrı
Koşul: yeni, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 12.300 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Wiese 2-axle low-loader flatbed semi-trailer with Fassi F545 crane
Mega Lowliner
Chassis
Welded construction with crossmembers, made entirely of high-quality steel
Neck height = approx. 220 mm including fifth wheel plate
Equipped with all necessary chassis reinforcements and cross braces
Axles
2 BPW axles, each with a 10,000 kg load capacity, equipped with 17.5" drum brakes
ABS: 1 axle with sensor
Axle spacing: 1,810 mm
Tyres
8 units, type 235/75 R17.5
Rims
Aluminum rims, 10-hole, hub-centric, ET = 122 mm offset
Lighting system
24V lighting system compliant with EU Directive 76/756/EEC et seq., featuring:
2x2 LED three-chamber tail lights
1x reversing LED spotlight
1x LED fog light
LED side marker lights
Lane indicator lights
Number plate lighting
2x 7-pin sockets + 1x 15-pin socket, wired according to EU standards
Floor
Galvanized grating in the lowbed area
Steel chequer plate at axle area
Load securing
Outer frame with D30 mm lashing hole profile on the slope
2x12 lashing points (8,000 daN) in the outer frame
3x rows of combi-stake pockets (80x80 mm) in the lowbed
Accessories
2x wheel chocks with bracket
Spare wheel carrier with winch
2x toolboxes with sliding drawer (for chain storage)
Surface protection
Steel construction: shot-blasted and primed
Paintwork
Chassis/frame/subframe: single colour in RAL 3020 (traffic red)
Axle hubs: single colour in RAL 3020 (traffic red)
Axles: black KTL-coated
Rims: Alcoa Dura-Bright aluminum
With Fassi F 545 RA.2.28 XE-Dynamic
Hydraulic outriggers
Additional support beams
360° working range
Approx. 90% working capacity to the front
For further information, we are happy to assist you.
Hedpet Izpyefx Actel
Küçük ilan
Triptis
2.248 km
Diğer
FlieglSZS 260 Jumbo mit Radmulden und Tiefbett für LKW
Çağrı
Koşul: yeni, makine/araç numarası: 3c70e9a5d82cfb3ada79baf95, boş ağırlık: 8 kg, azami yük ağırlığı: 17 kg, toplam ağırlık: 26 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 205 / 65 r 17,5, Further Information
Chassis Semi-Trailer for Freight Forwarding
Fine-grain steel welded construction, kingpin plate with interchangeable 2-inch kingpin, rear bevel to approx. 1920 mm, continuous hook-in profile for ramps at the rear and front on the gooseneck, wear rollers at the rear, lowered deck from the kink to the axle assembly. Drawing approval required from the customer upon placing the order!
Pair of lashing mushrooms recessed on top and side of the outer frame, each 10 tons
Pair of lashing rings recessed in the outer frame on the gooseneck, each 5 tons
24 t 2-speed landing gear, single-sided operation, with straight lower section, without lateral compensation
Rear support foldable, mounted externally
Chocks with holder
Side underrun protection, aluminium
Underrun protection, steel, for EU standards, if technically feasible
Quarter-shell mudguards
with anti-spray mud flaps to EU standards
1 pair of wheel recesses in the lowbed section after the gooseneck, recessed in the driving lane area, inclined for easier entry. Bottom length approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses at rear bevel. Depth approx. 200 mm. Note! Frame in the main beam area is 200 mm higher than wheel recess. Detailed technical evaluation required after order placement.
Wheel recess covers extendable from the lowbed with hardwood inserts, on rear bevel with hardwood inserts.
Electrical winch, 24 Volt, pulling force 5500 kg, mounted at gooseneck kink, not extending onto the loading area, operated by remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide roller at the rear bevel.
Axles + Suspension
SAF or BPW drum brake axles at our discretion
Air suspension with raise & lower valve + auto reset function
Wheels and Tyres
205 / 65 R 17.5 tyres with 129/127K (132/132G) marking for 8 t tyre load capacity at max. 90 km/h
manufacturer’s choice
Steel rims in twin arrangement, factory silver
Braking System
Hodsi Ri Hrjpfx Actel
2-line compressed air braking system
Spring-loaded parking brake
2 foolproof couplings at the front, without interconnecting line
EBS manufacturer: Haldex, electronic brake system with EBS socket at the front, without interconnecting cable (brake calculation sent to customer for approval, 15.07.2021)
Note: The trailer must only be towed by vehicles that ensure the effectiveness of the ABS!
Axle load detection via EBS CAN bus signal, for display via dashboard in the tractor unit, truck must be factory-prepared accordingly, not installed in truck (not a certified weighing system)
Electrics
24 Volt, multi-chamber lights, lateral yellow LED lighting
2 white position lights at the front
2 white/red lane marking lights at the rear
2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without interconnecting cable
Floor
Gooseneck with steel / checker plate covering
30 mm phenolic plywood floor, in the lowbed between the main beams, center
In the driving lane area, with serrated grating, in the wheel recesses with steel/checker plate covering.
Ramps
Pair of aluminium ramps, 3200 mm long, load capacity per pair 12,000 kg
Pair of steel ramps for access to the lowbed
Pair of steel ramps for crossing onto the gooseneck
Side Boards
Registration / Plates
Registration country: Germany
with Dekra inspection and certificate (according to §13 EC-Vehicle Approval Regulation)
Prepared for single-line number plate holder
Contour marking with reflective tape according to ECE R 048, yellow on sides
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTALPT40 Sonderpreis, Tieflader mit hydr. Rampen
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profile:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 4 x 11 t Gigant axles
* Air suspension with lift and lower system and RtR valve
* Pressure gauge scale for load weight determination (axles separated into 2 air suspension circuits)
* Side underrun protection
* Swing-out supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages front and rear
* Front axle: plastic quarter mudguards with splash protection
* Rear axle: straight, galvanized steel sheet skirts with splash protection
* Reflective contour tape on the sides and rear
* EBS multi-voltage system with 12 & 24 V electrics
* 15-pin power connector
* LED lighting system 12/24 V
Hjdpol Tlhrefx Actjl
* Removable LED rotating beacon at the rear
* 2 LED reversing lights (activated by reverse gear)
* Drawbar with 50 mm towing eye and height adjustment
* Tool box made of galvanized, black powder-coated steel sheet, approx. 1,000 mm wide, 600 mm deep, 300 mm high
* Front extension in front of the turntable platform, approx. 490 mm long with 45° corners
* ROBOT-welded anti-slip covering on the steel plate of the turntable platform
* Load securing package consisting of: 1 x 13.4 t UVV lashing eye on left and right in front of the front wall support, 4 holes on each side of the turntable platform with 2 t lashing capacity each, 1 pair of lashing eyes (13.4 t) hanging at the rear left & right in front of the rear support, 4 pairs of UVV lashing rings (10 t) per side, pivoting and lowerable, loadable in all directions and integrated into the outer frame, 3 stake pockets per side with simultaneous 2 t lashing option
* Hot-dip galvanized mechanical folding outriggers for 3 m total width (not at the rear bevel)
* Beam holder for extensions under the chassis on the left, longitudinally
* Excavator arm holder above the rear axle up to the end beam, approx. 2,100 mm long and approx. 190 mm deep, 2 pairs of 6.4 t lashing eyes per side in the excavator arm holder
* Hardwood floor on the running surfaces of the low-loader platform
* Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) mechanically adjustable laterally
* Outer beams of the loading ramps made of hardwood
* Steel construction prepared for 6-control valve block
* Loading edge unloaded approx. 950 mm +/- 20 mm chassis
* Turntable, folding outriggers, mechanical drop supports, loading ramps hot-dip galvanized
* --Axles, air tank, drawbar painted in a black tone--
* Tyres 235/75 R 17.5
* Vehicle has a one-day registration in 07/2024 due to missing tire pressure monitoring system and was never loaded/used
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf
Küçük ilan
Wiesmoor
2.630 km
Alçak şasi dorse
Burg3-Achs Sattelauflieger Tieflader Schaustell
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 23.970 kg, toplam ağırlık: 31.810 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/1991, yükleme alanı uzunluğu: 12.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.000 mm, toplam genişlik: 2.500 mm, Toplam ağırlık: 31.810 kg
Boş ağırlık: 7.840 kg
Yük taşıma kapasitesi: 23.970 kg
Toplam uzunluk: 12.980 mm
Yükleme uzunluğu: yaklaşık 12.500 mm (kuğu boynu yaklaşık 4.100 mm)
Hjdpfxoygqk Eo Actjl
Genişlik: 2.500 mm
Yükleme yüksekliği: yaklaşık 1.000 mm
Diğer bilgiler:
- BPW dingiller
- Çift tekerlekli
- Yükleme alanı altında eşya gözü
- 400 mm'lik açılır/sökülebilir yan kapaklar
- Yüksekliği ayarlanabilir destek ayakları
- Ayarlanabilir king pin
Araç reklamla kaplanmış ve/veya yazılı olabilir
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL2 achs Tandem Stahl 3 Seitenkip. mit Kombiklappe
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 10.870 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2025, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2023, Donanım: ABS, * KA-TA-R 14.4:
* Wabco ABS
* Emergency release system for spring brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Parabolic springs with tandem equalizer unit
* Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye
* Jost mechanical landing gear at the front
* 2 mechanical folding supports at the rear
* Plastic toolbox approx. 650 x 350 x 320 mm, front right side of chassis
* 15-pin electrical connector
* Multi-chamber tail lights
* Bolted underrun protection
* Plastic quarter mudguards
* Net hooks in the positions of the central locking mechanism plus 2 on the front bulkhead
* Chassis made from fine-grained steel
Hodpfxel Th Hte Actsl
* Steel pallet 3-way tipper superstructure, continuous side panels with internal tube reinforcement – without intermediate posts, folding with drop-side spring lift
* Removable bolted rear stanchions
* Combined steel double-wing rear doors, asymmetrically split, can swing and lock up to 270° – not foldable – with additional swinging frame for automatic tailgate opening during tipping, locking via galvanized rotary latch at the rear and central locking, deactivation function for automatic tailgate operation when tipping backwards with open door
* Each corner with 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes integrated in the outer frame on each side
* 4 mm steel floor plate (fine grain steel)
* Rear guide rails for loading ramps
* Reinforced body with load securing certificate
* 1 pair aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tyred and tracked vehicles
* Lockable rear compartment under the loading deck, built into the chassis for the ramps
* Chassis, drawbar, underrun protection, rear stanchions and rear folding supports hot-dip galvanized
* Axles, springs, air reservoir, and landing gear painted in black tone
* Tires 285/70 R19.5
* Side board paintwork RAL 9010 pure white
* Side wall paintwork available in RAL color of choice at additional cost
* Vehicle is registered for one-day registration (never used)
* Subject to errors and prior sale
* Available immediately ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALPT 40 Sonderpreis, Tieflader mit hydr. Rampen
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profile:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 4 x 11 t Gigant axles
* Air suspension with lifting and lowering system, including RtR valve
* Manometer pressure gauge for load weight determination (axles separated into two air suspension circuits)
* Side underrun protection
* Swing-out support legs at the rear of the chassis frame
* Mechanically adjustable warning sign kits at front and rear
* Front axle: plastic quarter mudguards with splash protection
Hodpfsl Tnu Aox Actol
* Rear axle: straight galvanized steel mud flaps with splash protection
* Reflective contour tape on sides and rear
* EBS multi-voltage system with 12 & 24 V electrics
* 15-pin power connector
* LED lighting system 12 / 24 V
* Removable LED beacon at the rear
* 2 LED reversing lights (activated via reverse gear)
* Drawbar with 50 mm towing eye and height adjustment
* Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high
* Extension in front of the turntable platform, approx. 490 mm long with 45° corners
* Robot-welded anti-slip covering on the steel plate of the turntable platform
* Load securing package consisting of: in front of the bulkhead carrier left & right each 1 x 13.4 t UVV lashing ring, on each side 4 holes in the turntable platform with 2 t lashing force each, 1 pair of lashing rings (13.4 t) suspended at the rear left & right in front of the rear cross member, on each side 4 pairs of swiveling and lowerable UVV lashing rings (10 t), loadable in all directions and recessed in the outer frame, on each side 3 stake pockets with simultaneous 2 t lashing possibility
* Hot-dip galvanized mechanical fold-out extensions for 3 m overall width (not in the rear slope area)
* Plank holder for extensions under the chassis left, longitudinal orientation
* Excavator stick rest, from rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep, on each side 2 pairs of 6.4 t lashing rings in the excavator stick rest
* Hardwood flooring on the running surfaces of the low loader platform
* Hydraulically operated single-piece loading ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable
* Outer planks of the loading ramps made of hardwood
* Steel structure pre-manufactured for 6-way control valve
* Loading edge height unladen approx. 950 mm +/- 20 mm chassis
* Turntable, fold-out extensions, mechanical supports, loading ramps all hot-dip galvanized
* --Axles, air tanks, drawbar painted in black--
* Tyres: 235/75 R 17.5
* The vehicle has a day registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Available immediately ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL2 achs Tandem Stahl 3 Seitenkip. mit Kombiklappe
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 10.870 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2025, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2023, Donanım: ABS, * KA-TA-R 14.4:
* Wabco ABS
* Emergency release device for spring-loaded brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Parabolic springs with tandem equalizing unit
* Height-adjustable drawbar, adjustable by approx. 300 mm, with 40 mm flanged towing eye
Hedpel Th Duofx Actel
* Jost mechanical landing gear at the front
* 2 mechanical folding supports at the rear
* Plastic toolbox approx. 650 x 350 x 320 mm, mounted on the right side at the front of the chassis
* 15-pin electrical connector
* Multi-chamber tail lights
* Screw-fastened underrun protection
* Plastic quarter fenders
* Net hooks located at the central locking housing and 2 pieces on the front wall
* Chassis made of high-tensile fine-grain steel
* Steel pallet tri-sided tipping body with continuous side walls reinforced at the top with internal pipes, without middle stakes, foldable with drop-side spring cylinders
* Bolted rear stanchions
* Combination steel double-wing rear doors, asymmetrically split, can be swung and locked at 270° (non-drop-down), with additional swing frame for automatic tailgate opening when tipping, rear locking by galvanized rotary latch and central locking, deactivation function for automatic tailgate when tipping backwards with opened wing doors
* 1 x 5 t lashing ring in each corner, plus 4 x 3 t lashing points recessed in the outer frame on each side
* 4 mm steel floor made from high-tensile fine-grain steel
* Rear mounting rail for loading ramps
* Reinforced superstructure with cargo securing certificate
* 1 pair of aluminum loading ramps, approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tired & tracked vehicles
* Lockable compartment for ramps, accessible from the rear and recessed under the loading area in the chassis
* Chassis, drawbar, underrun protection, rear stanchion, and rear folding supports hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in black
* Tyres 285/70 R19.5
* Body painted RAL 9010 pure white
* Side walls can be painted in any RAL color for an extra charge
* Vehicle comes with day registration (without actual use)
* Errors and prior sale reserved
* Immediately available ex works Egestorf
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Peine
2.429 km
Alçak şasi römork
GOLDHOFERTieflader TU 3-24/80 Tiefladeranhänger Rampen
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 18.000 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 12/1991, yükleme alanı uzunluğu: 8.200 mm, yükleme alanı genişliği: 2.500 mm, Donanım: ABS, * ABS
* BPW axles
----Body: Low-bed trailer (2200 + 6000 mm), loading height approx. 900 mm, rear sloped, drive-on height approx. 750 mm, steel/wooden floor, extendable to 3 m, spring-assisted loading ramps, lashing rings.
Hodpfx Aewdb Ttectol
Sale exclusively to businesses. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT & ACCESSORIES. Our General Terms and Conditions (see legal notice) form the basis of all purchase agreements, invoices, pro forma invoices, orders, and sales discussions.
Küçük ilan
Waltrop
2.571 km
Damperli yarı römork
WieltonNW-3 Getreidemulde 3-Achs Hinterkipp-Aluminiummulde mit 51cbm
Çağrı
Koşul: ikinci el, boş ağırlık: 6.020 kg, azami yük ağırlığı: 29.980 kg, toplam ağırlık: 36.000 kg, ilk tescil: 11/2023, bir sonraki muayene (TÜV): 05/2026, yükleme alanı uzunluğu: 9.890 mm, yükleme alanı genişliği: 2.460 mm, yükleme alanı yüksekliği: 2.100 mm, yükleme alanı hacmi: 51 m³, süspansiyon: hava, renk: diğer, Üretim yılı: 2023, vites türü: diğer, arka lastik boyutu: 385/65 R 22,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, Grain tipper with 51 cbm capacity.
* 4-point locking mechanism
* ABS
* Support device
* Aluminium rims
* Aluminium rims ET 120
* Saddle height unladen: 1,200 mm
* Control box for air suspension
* ECAS (Electronically Controlled Air Suspension)
* Rubber seal
* Grain shutter
* 2'' kingpin
* Single lift axle
* Disc brakes
* Sloped front wall
* Smart Board
Hjdpfoyc T H Isx Actol
* Tarpaulin bows
* Road chassis frame
* Folding underride guard
We expressly reserve the right to prior sale, as this item is also offered on other platforms. All accessory details are provided without guarantee; subject to change, prior sale, or errors. We strongly offer and recommend viewing and inspection to prevent any misunderstandings regarding the condition and suitability of the vehicle. Viewings and inspections are possible at any time by appointment and are expressly encouraged.
We will handle all formalities and deliver the vehicle with the desired transit plates for an additional fee.
Images have been partially edited and are for initial reference only; if interested, please contact us to request up-to-date pictures.
Küçük ilan
Schlierbach
2.315 km
Goldhofer STZ -TL 3 -33/80 3-akslı TL 3x direksiyon rampası TÜV YENİ! STZ -TL 3 -33/80 3-aks TL 3x d
GoldhoferSTZ -TL 3 -33/80 3-Achs TL 3x Lenk Rampen TÜV N...
Çağrı
Koşul: ikinci el, ilk tescil: 08/1998, toplam uzunluk: 16.000 mm, toplam genişlik: 2.550 mm, Üretim yılı: 1998, GOLDHOFER STZ -TL 3 -33/80 3 dingilli alçaltılmış (kuğu boyunlu) semi treyler, 3 yönlendirilebilir dingil, alçaltılabilir platform ve hidrolik rampalı
DORSE KUMLANMIŞ VE BOYANMIŞTIR!!
• ABS
Hsdjwpknwopfx Actsl
• 3 x BPW ECO-Plus havalı süspansiyonlu dingil
• 3 x yönlendirilebilir dingil
• Kaldırma / indirme sistemi
• Hidrolik, 2 parçalı yükleme rampası
• Hidrolik olarak alçaltılabilen platform
• 3 m'ye kadar genişletilebilir
• Uyarı levhaları
• Elektrik/hidrolik pompa için NATO fişi
• Toplam uzunluk: 16.000 mm
• Boş ağırlık: 15.900 kg
• Azami toplam ağırlık: 48.000 kg (teknik olarak mümkün olan 48.000 kg)
• Taşıma kapasitesi: 32.100 kg
• 4 x dingil yük göstergesi
• Çift lastik: 235/75 R17,5
- TÜV / Araç muayenesi ve özel denetim: !! yeni !!
- Alman aracı!
Hatalar ve ara satış hakkı saklıdır!
Sizin için aramayı kolaylaştırıyoruz: "wiese 3-achs-tieflader mit rampen und radmulden"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.







































































































































































































































































