Kullanılmış Humbaur 4-Achs-Tieflader Htd 40K- Mit Radmulden satın al (42.822)

Koşul: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flanged towing eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flanged towing eye ----Lighting / Electrics: * RDÜ (Tire Pressure Monitoring System) * LED taillights 12/24 V Bedpfx Ahspk Dv Ro Nelh * 15-pin electric connector ----General Attachments: * Jost landing gear at front * External hot-dip galvanized folding support legs at rear * Plastic toolbox, front right outside on front wall * Side underrun protection * Plastic quarter mudguards ----Low-bed loading area: * 50 mm softwood floor * Preparation in front of bulkhead for later installation of container locks * Bolt-on smooth steel front wall * Side walls made of trapezoidal steel sheet, foldable, with drop side lifting device * Steel rear wall, insertable between ramp mounts; when not in use, stored inside in front of bulkhead * Bolt-on rear stanchions * Rear approach angle approx. 860 mm ----Load securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Provision for fitting 3 t lashing rings every 600 mm * In each corner at front and rear: 1 x 6.3 t lashing ring * Various drilled holes for 1.2 t lashing points in front and rear crossmembers ----Ramps: * One-piece mechanical grid ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (collapsible to 20 mm width) ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, tailgate, and ramps * Drop side color in RAL 9010 pure white * Painting of side walls in a RAL color of your choice available at extra cost ----Info: * --Reinforced and certified body according to EN 12642 XL, including load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Koşul: ikinci el, azami yük ağırlığı: 26.300 kg, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2001, bir sonraki muayene (TÜV): 02/2026, yükleme alanı uzunluğu: 6.697 mm, yükleme alanı genişliği: 2.320 mm, yükleme alanı yüksekliği: 1.635 mm, yükleme alanı hacmi: 24 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.300 mm, Donanım: ABS, * 1. dingil kaldırılabilir * Platform * Makaralı branda * BPW ECO dingil, tambur frenli ----* Lastik ölçüsü: 445/45R19,5 * Teknik toplam ağırlık: * Boş ağırlık: 5700 kg Bedpfoym Iyqjx Ah Nolh * Toplam uzunluk: 8700 mm * SP muayenesi geçerlilik süresi: 08.2026 ----Araç numarası: 11808----Hatalar ve ara satış hakkı saklıdır----Reklamlar ve çeşitli yazılar dijital olarak kaldırılmıştır.-----Bir araç alırken ortaya çıkan tüm resmi işlemlerde size memnuniyetle yardımcı oluruz. Lütfen istek ve önerilerinizi bize iletin, biz sizin için ilgileniriz. Ayrıca ek ücret karşılığında aşağıdaki hizmetleri sunabiliriz:----Eski aracınızın takasıTÜV/SP muayene işlemleriTam kapsamlı ihracat işlemleriFinansman desteği sağlamaİhracat plakası başvurusuAraç transferiAraç tescil işlemleriKurtarma ve taşıma----?VTS EKİBİNİZ

Koşul: yeni, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 12.300 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Wiese 2-axle step frame extendable semi-trailer with Fassi F545RA.2.26 crane Mega Lowliner in step frame design. Chassis Welded construction with cross members, made entirely of high-grade steel Neck construction reinforced for front-mounted crane Axles 2 BPW axles, each with 10,000 kg load capacity, 17.5" drum brakes ABS: 1 axle with sensor Axle spacing: 1,810 mm Both axles with forced steering Tyres 8x type 235/75 R17.5 Rims Aluminum rims, 10-hole, hub-centric, ET= 122 mm Lighting system 24V lighting system in accordance with EU Directive 76/756/EEC and subsequent amendments, with: 2x2 LED three-chamber tail lights 1x LED reversing light 1x LED fog light LED side marker lights Lane marker lights Number plate illumination 2x 7-pin sockets + 1x 15-pin socket, connected according to EU standard Floor Anti-slip phenolic plywood floor Steel chequer plate in the axle area Load securing Outer frame with lashing hole profile D30 mm in the bevel 2x12 lashing points 8,000 daN in the outer frame 3x combi stanchion pocket rows for 80x80 mm stanchions in the low-bed section Accessories 2x wheel chocks with holders Spare wheel holder with winch 2x toolboxes with drawers (for chains) etc. Crane: Fassi F 545 RA.2.26 XE-Dynamic Bedpfx Aeyihgyjh Njlh Hydraulic outriggers Additional stabilizer beam 360° working area Approx. 100% lifting capacity to the front The attached images are sample photos. We manufacture crane trailers in various configurations. For further information, please do not hesitate to contact us. We are happy to provide a specification-based quotation on request.

Koşul: yeni, azami yük ağırlığı: 30.010 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.000 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New vehicle: Fliegl 4-axle low loader trailer with wheel recesses and split ramps, type VTS 400 RM Lease-purchase offer: 48-month term, down payment only VAT, final residual value 40% Monthly rate: EUR 899.00 Vehicle / Body: Low loader First registration: New vehicle Gross weight: 24,000 kg / 40,000 kg Unladen weight: 9,990 kg Payload: 14,010 kg / 30,010 kg Overall length: 12,000 mm Load length: total approx. 10,000 mm, gooseneck approx. 2,850 mm, loading deck including rear bevel approx. 7,150 mm Width: 2,550 mm Loading height: 900 mm Further information: Chassis: Low loader trailer Steel welded construction Turntable with heavy-duty ball race Rear support foldable Wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on 1st & 2nd axle with anti-spray flaps behind each axle, anti-spray flaps behind the 4th axle Excavator arm recess above the rear axles, extending to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes, each rated 5 t, in the excavator arm recess at approx. 300 mm from the front and approx. 200 mm before the rear bevel Spare wheel holder for 1 spare wheel, mounted vertically on the front center of the gooseneck. Spare wheel manufacturer as base tires, steel rim Storage box sunken into the floor of the gooseneck with cover, W=720 mm / L=520 mm / D=170 mm 1st pair of wheel recesses behind gooseneck, fitted in low-bed lane area, ramped entrance, bottom length approx. 1,600 mm, approx. 400 mm deep. Note: Main frame is 400 mm higher than wheel recess in this area. 2nd pair of wheel recesses between axles, fitted in low-bed lane area, ramped entrance, bottom length approx. 600 mm, approx. 300 mm deep. Note: Main frame is 300 mm higher than wheel recess in this area. Extendable width up to 3,000 mm (extension not available at the rear bevel or inside wheel recesses). (Track width of machines/vehicles to be transported must not exceed external frame width of 2,550 mm) Storage compartment for timbers under the low bed deck 70 mm timbers for extension to 3,000 mm Lashing points low loader: 1 pair of recessed ring lashing points at front of gooseneck, each 5 t 4 pairs of lashing holes in external frame, each 5 t (for hook-in ratchet straps) 8 pairs of welded-on lashing mushrooms, top and sides of the external frame, each 10 t 2x at front on gooseneck 6x in the low bed First lashing point 250 mm from the front, last max. 250 mm from rear; distance between lashing points not greater than 1,100 mm 5 pairs of stanchion pockets recessed in the external frame, internal 70 x 40 mm (can be converted to 5 t ring lashing points, not included) 1 pair of additional folding lashing points recessed in the floor, each 10 t Bjdpjtrizkofx Ah Njlh 1x inside next to main frame at start of low bed 2 pairs of additional folding lashing points, each 10 t 1x on gooseneck (protrudes) 1x recessed in floor behind rearmost axle Drawbar coupling for turntable trailer: Drawbar with tested 50 mm coupling eye, coupling eye angled at 8° D-value min. 160 kN Axles + Suspension: BPW drum brake axles Laser-aligned axles/chassis; reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation at front (rocker compensation) Wheels and tires: 235/75 R 17.5" Manufacturer’s choice, with M+S marking Steel rims in twin-wheel configuration, factory silver Braking system: 2-line compressed air brake system Spring-loa

Koşul: yeni, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 12.300 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Wiese 2-axle low-loader flatbed semi-trailer with Fassi F545 crane Mega Lowliner Chassis Welded construction with crossmembers, made entirely of high-quality steel Neck height = approx. 220 mm including fifth wheel plate Equipped with all necessary chassis reinforcements and cross braces Axles 2 BPW axles, each with a 10,000 kg load capacity, equipped with 17.5" drum brakes ABS: 1 axle with sensor Axle spacing: 1,810 mm Tyres 8 units, type 235/75 R17.5 Rims Aluminum rims, 10-hole, hub-centric, ET = 122 mm offset Lighting system 24V lighting system compliant with EU Directive 76/756/EEC et seq., featuring: 2x2 LED three-chamber tail lights 1x reversing LED spotlight 1x LED fog light LED side marker lights Lane indicator lights Number plate lighting 2x 7-pin sockets + 1x 15-pin socket, wired according to EU standards Floor Galvanized grating in the lowbed area Steel chequer plate at axle area Load securing Outer frame with D30 mm lashing hole profile on the slope 2x12 lashing points (8,000 daN) in the outer frame 3x rows of combi-stake pockets (80x80 mm) in the lowbed Accessories 2x wheel chocks with bracket Spare wheel carrier with winch 2x toolboxes with sliding drawer (for chain storage) Surface protection Steel construction: shot-blasted and primed Paintwork Chassis/frame/subframe: single colour in RAL 3020 (traffic red) Axle hubs: single colour in RAL 3020 (traffic red) Axles: black KTL-coated Rims: Alcoa Dura-Bright aluminum Bsdjn Hrtgopfx Ah Nolh With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional support beams 360° working range Approx. 90% working capacity to the front For further information, we are happy to assist you.

Koşul: yeni, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 12.300 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Wiese 2-axle low-loader flatbed semi-trailer with Fassi F545 crane Mega Lowliner Chassis Welded construction with crossmembers, made entirely of high-quality steel Neck height = approx. 220 mm including fifth wheel plate Equipped with all necessary chassis reinforcements and cross braces Axles 2 BPW axles, each with a 10,000 kg load capacity, equipped with 17.5" drum brakes ABS: 1 axle with sensor Axle spacing: 1,810 mm Tyres 8 units, type 235/75 R17.5 Rims Aluminum rims, 10-hole, hub-centric, ET = 122 mm offset Lighting system 24V lighting system compliant with EU Directive 76/756/EEC et seq., featuring: 2x2 LED three-chamber tail lights 1x reversing LED spotlight 1x LED fog light LED side marker lights Lane indicator lights Number plate lighting 2x 7-pin sockets + 1x 15-pin socket, wired according to EU standards Floor Galvanized grating in the lowbed area Steel chequer plate at axle area Load securing Outer frame with D30 mm lashing hole profile on the slope 2x12 lashing points (8,000 daN) in the outer frame 3x rows of combi-stake pockets (80x80 mm) in the lowbed Accessories 2x wheel chocks with bracket Spare wheel carrier with winch Bsdpot Izpyefx Ah Nelh 2x toolboxes with sliding drawer (for chain storage) Surface protection Steel construction: shot-blasted and primed Paintwork Chassis/frame/subframe: single colour in RAL 3020 (traffic red) Axle hubs: single colour in RAL 3020 (traffic red) Axles: black KTL-coated Rims: Alcoa Dura-Bright aluminum With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional support beams 360° working range Approx. 90% working capacity to the front For further information, we are happy to assist you.

Koşul: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lower system and RtR valve * Pressure gauge scale for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: plastic quarter mudguards with splash protection Bledpfx Ahsl Tlhrj Njh * Rear axle: straight, galvanized steel sheet skirts with splash protection * Reflective contour tape on the sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12/24 V * Removable LED rotating beacon at the rear * 2 LED reversing lights (activated by reverse gear) * Drawbar with 50 mm towing eye and height adjustment * Tool box made of galvanized, black powder-coated steel sheet, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front extension in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip covering on the steel plate of the turntable platform * Load securing package consisting of: 1 x 13.4 t UVV lashing eye on left and right in front of the front wall support, 4 holes on each side of the turntable platform with 2 t lashing capacity each, 1 pair of lashing eyes (13.4 t) hanging at the rear left & right in front of the rear support, 4 pairs of UVV lashing rings (10 t) per side, pivoting and lowerable, loadable in all directions and integrated into the outer frame, 3 stake pockets per side with simultaneous 2 t lashing option * Hot-dip galvanized mechanical folding outriggers for 3 m total width (not at the rear bevel) * Beam holder for extensions under the chassis on the left, longitudinally * Excavator arm holder above the rear axle up to the end beam, approx. 2,100 mm long and approx. 190 mm deep, 2 pairs of 6.4 t lashing eyes per side in the excavator arm holder * Hardwood floor on the running surfaces of the low-loader platform * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) mechanically adjustable laterally * Outer beams of the loading ramps made of hardwood * Steel construction prepared for 6-control valve block * Loading edge unloaded approx. 950 mm +/- 20 mm chassis * Turntable, folding outriggers, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tank, drawbar painted in a black tone-- * Tyres 235/75 R 17.5 * Vehicle has a one-day registration in 07/2024 due to missing tire pressure monitoring system and was never loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system, including RtR valve * Manometer pressure gauge for load weight determination (axles separated into two air suspension circuits) * Side underrun protection * Swing-out support legs at the rear of the chassis frame * Mechanically adjustable warning sign kits at front and rear * Front axle: plastic quarter mudguards with splash protection * Rear axle: straight galvanized steel mud flaps with splash protection * Reflective contour tape on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at the rear * 2 LED reversing lights (activated via reverse gear) * Drawbar with 50 mm towing eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of the turntable platform, approx. 490 mm long with 45° corners * Robot-welded anti-slip covering on the steel plate of the turntable platform * Load securing package consisting of: in front of the bulkhead carrier left & right each 1 x 13.4 t UVV lashing ring, on each side 4 holes in the turntable platform with 2 t lashing force each, 1 pair of lashing rings (13.4 t) suspended at the rear left & right in front of the rear cross member, on each side 4 pairs of swiveling and lowerable UVV lashing rings (10 t), loadable in all directions and recessed in the outer frame, on each side 3 stake pockets with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical fold-out extensions for 3 m overall width (not in the rear slope area) * Plank holder for extensions under the chassis left, longitudinal orientation * Excavator stick rest, from rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep, on each side 2 pairs of 6.4 t lashing rings in the excavator stick rest * Hardwood flooring on the running surfaces of the low loader platform Blodpfxol Tnu As Ah Nsh * Hydraulically operated single-piece loading ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable * Outer planks of the loading ramps made of hardwood * Steel structure pre-manufactured for 6-way control valve * Loading edge height unladen approx. 950 mm +/- 20 mm chassis * Turntable, fold-out extensions, mechanical supports, loading ramps all hot-dip galvanized * --Axles, air tanks, drawbar painted in black-- * Tyres: 235/75 R 17.5 * The vehicle has a day registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available immediately ex Egestorf

Koşul: yeni, azami yük ağırlığı: 36.360 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front chamfered corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm as well as lower area widenings * Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) – max. point load 5 t each * Recess in the chamfer and protruding into the loading platform to accommodate an excavator bucket handle (approx. 2,900 x 750 x 210/290 mm – L x W x H) * 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 2 pairs of lashing rings in the excavator bucket recess (LC 5,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering * Ramps with hydraulically foldable ramp sections and hydraulic lifting gear, hydraulically adjustable * Maximum load per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lockout via reverse gear and manual activation * Air suspension with lift and lower valve Tyres: * Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * TPMS Tyre Pressure Monitoring System according to ECE R 141 Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure optimal corrosion protection Bodoyhkq Ujpfx Ah Nelh * Final coating with two layers of 2K topcoat, single-color in RAL 3002 Carmine Red, according to RAL System 841GL * Rims in silver-grey Incl. the following additional features: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN) * Electro-hydraulic unit at the rear, under the loading platform * On the gooseneck, plug-in aluminum side and rear panels, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Body length approx. 2,560 mm) * One galvanized toolbox, integrated into the chamfered gooseneck * 2 pairs of WADER container pockets in the loading platform for a 20' or 30' container * 3 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform * 3 pairs of additional removable, galvanized covers over the wheel recesses – max. point load 3.5 t each * One removable galvanized intermediate table with 1 pair of WADER container pockets * 1 additional hook-on intermediate table, ap

Koşul: ikinci el, boş ağırlık: 6.560 kg, azami yük ağırlığı: 18.440 kg, toplam ağırlık: 25.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2017, yükleme alanı uzunluğu: 13.700 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 850 mm, dingil mesafesi: 7.500 mm, renk: mavi, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, basınçlı hava freni, ek farlar, * German semi-trailer * Very good visual condition, see photos * 2-axle low loader, Jumbo TO 152 DE * Loading area: length 13,700 mm x width 2,540 mm * Loading height approx. 850 mm * Stake pockets * Multilock * Wooden loading floor * Winch with cable remote control 15,000 lbs * Long aluminium ramps 3,000 x 400 mm, laterally adjustable * ROR axles * Air suspension * Haacon spindle supports * ABS + EBS * Work lights * Spare wheel * Toolbox * Drum brakes * Wheelbase 7,500 mm + 1,250 mm Bledpfoxu Nnwsx Ah Noh * Perm. gross vehicle weight 27,200 kg * Unladen weight 6,560 kg * Payload up to 20,640 kg If you require a new roadworthiness inspection (TÜV), we are happy to provide an offer through our partner workshops. Our offer is in general WITHOUT new TÜV inspection, WITHOUT new DGUV, WITHOUT new SP, WITHOUT new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and evaluation of the goods to avoid any misunderstanding regarding their condition and suitability for the buyer. Viewing and inspection are possible at any time by appointment and are expressly encouraged. All information provided without guarantee. We accept no liability for errors or incorrect details in this offer. The buyer is obliged to independently verify the condition and equipment of the items/vehicles. Subject to prior sale, errors, and changes.

Koşul: ikinci el, azami yük ağırlığı: 12.000 kg, toplam ağırlık: 18.500 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 03/1978, bir sonraki muayene (TÜV): 05/2024, toplam genişlik: 2.500 mm, toplam yükseklik: 2.180 mm, Ruthmann 1-axle low loader, TÜV valid until 05/24, ideal for transporting construction machinery and forklifts. Sale only to dealers and commercial customers. Blsdpfstrilcjx Ah Neh No liability for typographical or listing errors. All information without guarantee. Subject to prior sale.

Koşul: yeni, azami yük ağırlığı: 45.250 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full specification available upon request. Chassis, cranked: * Special steel frame made of high-tensile fine-grain steels, electric-welded at connection points * Well-dimensioned outer frame. 4-axle configuration * Wheel arches above the axles with spray suppression * All steel parts are sandblasted * Side underrun protection made of anodised aluminium installed * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special construction in the cranked area for the maximum possible low-bed length in combination with alu-leg drop supports instead of telescopic supports, max. rear swing radius of the tractor unit approx. 2,100 mm Special body with rear stanchion extension: * DINKEL special superstructure * Self-supporting aluminium roof rail/profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stanchions extendable for loading/unloading up to approx. 4,200 mm * Three sliding stanchions per side with rubber tension relief * Additional central stanchion locks in the roof rail and parking position, via pull cable and spring bolt * DINKEL mechanical lifting roof, height-adjustable * Lifting roof height approx. 400 mm, operable from both sides or one side without opening the opposite side * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with height adjustment in the stanchions * Front overlap at the bulkhead for driving operation under tarpaulin up to total height approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminium slats on the sides, lower 450 pockets, above it 4 single row pockets. In the high bed only 3 rows of slats, evenly distributed gaps Floor: * Approx. 27 mm specially water-resistant bonded beech plywood, anti-slip surface * Steel plate in wheel arch area, fork-lift truck suitable as per DIN standard * Outer frame surface flush Brakes: * WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (Parking-Release Safety Valve) * Spring-loaded brake cylinders as parking brake * WABCO Smart Board with odometer and axle load display * Incl. WABCO tire pressure monitoring system Axles: * 4 x 10,000 kg SAF drum-braked axles in low-loader configuration * Air suspension with lift and lower facility, total stroke approx. 230 mm * Third and fourth axle as friction-steered trailing axles with electric and mechanical locking Twin tyres: * 235/75 R 17.5, 16-ply. Brand of our choice, incl. spare wheel holder * Without spare wheel Lighting: * According to EC standard including LED side marker lights * Position lamps in LED version * 2 additional reversing lights * 2 working lights, inside on front wall, upper side Bjdpfx Ahswx Dbij Nslh Paintwork: * Chassis and superstructure painted in solid RAL 3002 carmine red * Centre stanchions, axles KTL-coated black * Corner stanchions hot-dip galvanised * Plastic parts black * Galvanised parts unpainted * Rims in factory silver Special equipment included: * 15-pin electrical supply line * Air suspension in ECAS version, operation on the trailer * Oversize signs front and rear in galvanised, infinitely telescopic version, with mounted marker lights including base sockets for rotating beacons (small panels) * Additional unlocking of sliding roof frame from outside * 4 stanchion adapters for special outer frame profile, for securing centre stanchions as desired * PVC sliding tarpaulins, col

Koşul: yeni, azami yük ağırlığı: 38.140 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Partial equipment list. Full specifications available on request. Gooseneck: Bodpew Tpq Djfx Ah Njlh - Gooseneck with approx. 45° chamfered front corners and a rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear bevel approx. 1,000 mm x 8° - Between the 1st and 2nd axle, one pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable, galvanized wheel recess covers (approx. 670 mm wide - max. point load 5 t each) - 1 pair of recessed lashing rings at the front of the loading deck (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: Tyres 235/75 R17.5 3PMSF, brand at our discretion - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to the truck via the standardised EBS interface per ISO 11992 - For correct display, the truck must be capable of transmitting and displaying this data. Axles: - BPW axles and suspension, 2 fixed axles, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activatable via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Brake system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel structure: Steel frame made of high-strength fine-grain steels. - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel structure is automatically blasted after welding using a turbine blasting system - Second blasting with corundum for optimal coating adhesion - HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure top corrosion protection - Final painting with two coats of 2K paint, solid colour in RAL 3002 Carmine Red, rear section metallised and painted in RAL 9010 Pure White - No metallic paint possible - Paint finish tested in salt spray test per ISO 9227-NSS - Sealing of cavities with special wax Including the following accessories: - Mounts for warning signs on both sides at the gooseneck and at the rear, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch kingpin - Galvanized steel front bulkhead, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection panel - Galvanized folding supports under the loading area bevel - Hardwood impact protection on the rear wall from gooseneck to loading platform - 1 pair of recessed lashing rings along the central frame at the rear on the bevel (LC 10,000 daN) - Aluminium side walls and tailboard on the gooseneck

Koşul: yeni, azami yük ağırlığı: 37.820 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately or short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: Gooseneck with front corners beveled at approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) Bodjw Tpqwjpfx Ah Nelh * Hardwood flooring approx. 30 mm thick Load platform: * 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm and widenings at the lower section * Between the 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) - max. point load approx. 5 t/each * Recess in the beveled area and extending into the load platform for accommodating the excavator dipper stick (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of horizontally mounted lashing rings at the front of the loading area (LC 10,000 daN) * 5 pairs of outward foldable lashing rings (LC 5,000 daN) * 3 pairs of outward foldable lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator boom recess (LC 5,000 daN) * Cut-outs in the outer frame of the load platform for attaching tensioning straps (LC 2,000 daN) One-piece steel ramps: * 1 pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering * Ramp with hydraulic lifting system, hydraulically adjustable * Maximum load per pair: 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not have to be included in the vehicle length when in driving position Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 axles rigid, 1 axle self-steering * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, can be engaged via reverse gear and manually * Air suspension with lift and lower valve * Axle tools Tyres: * Tyres 235/75 R 17.5 3PMSF – Brand of our choice * TPMS tyre pressure monitoring system as per ECE R 141. Data transfer to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be capable of both receiving and displaying this data Brake system: * WABCO brake system in compliance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system as per EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Coating: * Complete steel structure automatically shot-blasted with turbine system after welding * Second sandblasting with corundum for optimum adhesion of the coating system * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection * Final coating with two layers of 2K topcoat, plain color RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver * Rear section metalliz

Koşul: ikinci el, azami yük ağırlığı: 44.980 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 09/2024, bir sonraki muayene (TÜV): 09/2025, toplam genişlik: 2.550 mm, Donanım: ABS, Our entire fleet of vehicles, including immediately and soon available models, can be found on our website. Selection of features. Complete specifications available on request. Chassis, stepped frame: * Special steel frame made from high-strength fine-grained steels, electrically welded at the joints, well-dimensioned outer frame * 4-axle layout. Wheel covers above the axles with spray-suppression * All steel parts sandblasted * Side underrun protection made of anodised aluminum fitted * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special construction in the stepped area to enable the greatest possible low-bed length in combination with AluLeg support legs instead of telescopic landing gears, max. rear swing clearance of the tractor unit approx. 2,100 mm Special superstructure with extendable rear stanchions * Self-supporting aluminum roof bow/profile approx. 120 x 100 mm, sliding tarpaulin with plastic flaps * Rear stanchions extendable to approx. 4,200 mm * Three sliding stanchions per side with rubber spring relief * Additional middle stanchion lockings in the roof bow and stowage position, actuated by pull cable and spring latch * Mechanically adjustable lifting roof, lift height approx. 400 mm, operable from both sides or one-sided without opening the opposite side or doors * Additional height adjustment approx. 480 mm in approx. 40 mm increments via stanchion adjustment * Front overlap at the bulkhead for driving under tarpaulin up to overall height approx. 4,400 mm * Four rows of approx. 150 mm stackable aluminum slats per side, 450 mm pockets at the bottom, four rows of single pockets above * Only three rows of plug-in slats in the upper deck. Spacings evenly distributed Bsdpfx Aolthgujh Nolh Floor * Approx. 27 mm special water-resistant bonded beech multiplex panels, rough surface * Steel sheeting in the wheel arch area * Suitable for forklift traffic according to DIN ? standard * Outer frame flush finish Brakes * WABCO air brake system with EBS according to EC Directive 71/320 EEC including PREV (Park Release Safety Valve) * Spring-type parking brake cylinders * WABCO Smart Board with odometer and axle load display Axles * 4 x 10,000 kg SAF/Sauer axles with drum brakes, low-loader version * Air suspension with lifting and lowering function, total travel approx. 230 mm * Third and fourth axles as friction-steered trailing axles with electric and mechanical locking Twin tires * 235/75 R 17.5, -16-fold, incl. spare wheel holder, without spare wheel Paintwork * Chassis RAL 3002 red, single color * Middle stanchions, axles KTL coated black * Corner stanchions hot-dip galvanized * Plastic parts black * Galvanized parts unpainted * Rims in factory silver * Bodywork in single-tone RAL color Special equipment included * ECAS air suspension, operation on the trailer * Oversize signage front and rear, galvanized, stepless telescoping with marker lights incl. bases for revolving beacons (small plates) * Additional external unlocking for sliding tarpaulin frame * 4 stanchion adapters for special outer frame profile, for locking the middle stanchions arbitrarily * PVC sliding tarpaulin, color similar to RAL 9006 silver * Translucent roof tarpaulin, extra-wide and extra-high version, flat hooks, tarpaulin folds, closures with ratchet/OCS * Rear left telescoping base for revolving beacon incl. light * Outer frame for machinery transport with approx. 64 lashing points in 2,000 kg, 3,000 kg, and 10,000 kg versions, according to construc

Koşul: ikinci el, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2017, * SAF akslar * Teker havuzları * Genişliği ayarlanabilir hidrolik yükleme rampaları * Havalı süspansiyon * Genişletilebilir * Boş ağırlık: 11.020 kg -----Dahili araç numarası: 11010----Hatalar ve ara satış hakkı saklıdır. Bjdpfx Aewta Aljh Njlh WhatsApp desteği mevcut! Araçla ilgili sorularınız veya daha fazla bilgi için bize rahatça WhatsApp üzerinden yazabilirsiniz. WhatsApp Almanca, İngilizce -- WhatsApp Almanca, İngilizce, Arapça

Koşul: ikinci el, boş ağırlık: 3.570 kg, azami yük ağırlığı: 10.030 kg, toplam ağırlık: 13.600 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2017, yükleme alanı uzunluğu: 6.300 mm, yükleme alanı genişliği: 2.470 mm, süspansiyon: diğer, lastik boyutu: 205/65R17,5 ---/124J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 205/65R17,5 ---/124J, arka lastik boyutu: 205/65R17,5 ---/124J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Loading height approx. 820 mm, 10 lashing rings, -- Printing errors, mistakes and modifications reserved, sample images --, More data at: !, More details: ! Bedpfx Aszbbfpjh Njlh

Koşul: ikinci el, boş ağırlık: 3.550 kg, azami yük ağırlığı: 10.850 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2012, bir sonraki muayene (TÜV): 04/2027, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, süspansiyon: çelik, lastik boyutu: 385/55R19,5 150J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 385/55R19,5 150J, arka lastik boyutu: 385/55R19,5 150J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Bağlama halkaları, geniş lastik donanımı, -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler --, Daha fazla bilgi için: !, Detaylar: ! Blsdezatxlepfx Ah Nsh

Koşul: ikinci el, boş ağırlık: 4.160 kg, azami yük ağırlığı: 13.840 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2026, yükleme alanı uzunluğu: 5.010 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 800 mm, süspansiyon: hava, lastik boyutu: 385/65R22,5, Donanım: ABS, kamyon kaydı, | Humbaur HTK195024 Gravel 3-Way Tipper | Rigid Drawbar | Hot-dip Galvanized Chassis | Hydraulic Connections | Platform Dimensions: L: 5.0 m, W: 2.42 m, Height: 0.80 m | Drop sides made of Hardox, 800 x 2.5 mm, swiveling | Air Suspension | Floor made from 4 mm high-wear-resistant steel HB450 | Superstructure cataphoretic dip-coated and powder-coated, RAL9006 White Aluminium | 6 pairs of lashing rings, each with 3,000 kg lashing point | SAF axle with drum brake | Gross weight: 18,000 kg, Payload: 13,720 kg | 50 mm towing eye | Tyres: 385/65R22.5 | Operating voltage: 24V | Subject to errors, input mistakes, and prior sale. Bedpfx Ahsy Snzao Nolh

Koşul: ikinci el, boş ağırlık: 3.680 kg, azami yük ağırlığı: 10.720 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2021, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, süspansiyon: çelik, lastik boyutu: 385/55R19,5 156J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 385/55R19,5 156J, arka lastik boyutu: 385/55R19,5 156J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, YENİ GİBİ, geniş lastik, GALVANİZLİ damper kasası, 12 adet sabitleme halkası, 600 mm yan paneller, rampalar için ek ücret 1.000 €, -- Baskı hataları, yanlışlıklar ve değişiklik hakkı saklıdır, örnek görseller --, Daha fazla veri için: !, Detaylı bilgi: ! Bledjy U H A Uepfx Ah Njh

Koşul: ikinci el, boş ağırlık: 6.200 kg, azami yük ağırlığı: 23.800 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2006, süspansiyon: çelik, lastik boyutu: 235/75R17,5 141/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 141/140J, arka lastik boyutu: 235/75R17,5 141/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Lashing eyes, -- Errors, omissions, and changes excepted, sample images --, More data at: !, More details: ! Bljdpfjy T E Dnox Ah Noh

Koşul: ikinci el, azami yük ağırlığı: 23.900 kg, toplam ağırlık: 31.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2007, Üretim yılı: 2007, Internal vehicle number: G400178 Bedpfx Aezahg Deh Nelh German vehicle Available immediately at our yard in Kaufungen - Kassel, Germany More INFO at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Empty weight: 7,100 kg Total length: 10,800 mm Max. permissible weight: 31,000 kg Subject to errors and prior sale. We will gladly take your used vehicle in part exchange. Financing available directly through our company. GOLEC NUTZFAHRZEUGE GMBH Languages spoken: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Koşul: ikinci el, azami yük ağırlığı: 30.100 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 02/2000, yükleme alanı uzunluğu: 10.600 mm, yükleme alanı genişliği: 2.750 mm, toplam genişlik: 2.750 mm, Müller Mitteltal TT40 Low Loader - Trailer: ---- * Manufacturer: Müller Mitteltal * Model: TT40 * First registration: 02 / 2000 * Gross vehicle weight: 40,000 kg * Unladen weight: 9,900 kg * Payload: 30,100 kg * 4-axle * Last axle steered * MOT / Inspection due! * Hydraulic ramps * Wooden planks in the low-bed section have been replaced previously * Inspection (MOT/TÜV) due * German registration * Total loading area: approx. 10.60 meters * Loading width: approx. 2.75 meters * Low-bed length: approx. 4.50 meters * Rear loading height: approx. 0.9 meters * Low-bed loading height: approx. 0.65 meters Blodpfx Ahezaylfs Njh * Front neck loading height: approx. 1.05 meters * Additional photos on request (WhatsApp Erik) * Price: 12,900 Euro, net plus 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp All information provided without guarantee or warranty. Subject to errors and prior sale.

Koşul: ikinci el, boş ağırlık: 6.341 kg, azami yük ağırlığı: 29.659 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2021, bir sonraki muayene (TÜV): 09/2025, yükleme alanı uzunluğu: 13.639 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.955 mm, yükleme alanı hacmi: 99 m³, süspansiyon: hava, lastik boyutu: 435 / 50 R 19,5, renk: gümüş, vites türü: diğer, ön lastik ölçüsü: 435 / 50 R 19,5, arka lastik boyutu: 435 / 50 R 19,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, Basic color: silver Additional features: ABS, EBS, air suspension, disc brakes, suspension: air-lift, payload (kg): 29,659 Body type: Jumbo trailer L x W x H 13,630 x 2,480 x 2,955 mm, galvanized subframe, Schmitz axles with air suspension including lifting and lowering function, disc brakes, 1st axle is a lift axle, sliding curtain on both right and left (neutral), lifting roof, Edscha sliding roof system, aluminium insert slats, RSAB. Bedpfx Asvhtmzsh Njlh

Koşul: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Platform | Trailer Available in 37th week of 2026. Inquiry no.: 31941. Delivery to your address possible. * We are happy to provide a tailored offer. * ----- * Gross weight: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27 m x 2.47 m platform with galvanized 400 mm front wall * Digger bucket rest made of hardwood bolted to the front wall * Unladen deck height: 930 mm / Laden: 870 mm * One-piece ramps with hot-dip galvanized anti-slip grating, adjustable to approx. 20 mm width, secured by holding rods and diagonal supports * Ramp lift with vertically mounted, adjustable springs for convenient single-operator use * 4 UVV drop lashing rings (LC 6300 daN) * Perforated outer frame (45° angled, with lashing holes; lashing point load capacity LC 2000 daN at minimum 480 mm spacing). Installation of drop lashing rings LC 3000 daN approx. 600 mm apart possible. Tight crossmember spacing, high-profile front & rear ends with rear loading slope, hot-dip galvanized * 10 UVV lashing rings LC 3000 daN, retractable in the existing hole pattern on the outer frame, in addition * Additional lashing options via drilled holes (Ø 50 mm, LC 1200 daN) in front and rear beams * Toolbox mounted in front of the front wall * Side marker lights with indicator function * 50 mm thick softwood floor. Chassis hot-dip galvanized * Height-adjustable landing gear at the front, folding supports at the rear * 2 container locks recessed in the front crossmember * Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable. 50 mm towing eye available on request * 1 removable LED beacon at the rear ----- * Leasing, hire purchase, financing, trade-in available * Example: €525 per month, 60-month term, no down payment, no final installment ----- * Our opening hours: * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 Outside of opening hours, appointments are possible by arrangement. We speak German, English, Polish, French. Leasing, financing, and trade-in available. Bjdpfx Aszbfmqoh Nslh