Kullanılmış Müller-Mitteltal 18 To, Luft, Seitliche Alu Wände, Rollplane satın al (36.297)

Koşul: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift/lowering device ----Tow Bar: * Tow bar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck cockpit via EBS signal (no installation required on truck side) * 15-pin power plug * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm * Lateral underrun protection Djdpex Nlkgofx Aldocg * Plastic quarter fenders * Rear underrun guard ----Platform: * Zurr-fix external frame, 45° bent, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing * Option for 3,000 kg lashing rings at approximately 600 mm intervals – 12 units of 3,000 kg lashing rings included per side * 5 pockets per side in the outer frame for pipe stakes 100 x 50 mm (stakes not included) * 30 mm phenolic resin plywood flooring ----Drum Supports: * 3 galvanized drum supports secured by container locks with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm, maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm with cross-connection * Load capacity per cable drum support 6,000 kg * Without drive and drum brake * Support arm with tension latch for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 locating rings * 2 centering cones made of polyamide * 4 units 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading Height: * Loaded approx. 1,040 mm ----Coating: * Chassis, turntable, tow bar, outer frame, underrun guard hot-dip galvanized * Axles painted in a shade of black ----Information: * Technical uprating to 30 t GVW possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 51 / 2026

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 ton BPW Eco axles * Parabolic leaf springs Dcjdpfx Ajl Thxdjldjg * Mechanical axle equalization at the rear * Side underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning panel sets at front and rear * VA closed plastic mudguards and HA straight galvanized steel skirts, each with spray protection * Contour marking tape, reflective on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED rear lights * Removable beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle * 15-pin electrical plug * Four socket pockets on each side (no stakes included) with integrated lashing options * Load securing package consisting of: 2 lashing rings (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant swivel and retractable lashing rings, loadable in all directions and recessed into the outer frame – in corners 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for 3 m total width (not in the rear chamfer) * Widening planks stored in the center of the loading area * Digger arm rest above the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides in the digger arm rest area) * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way control valve block for the later retrofitting of hydraulic ramp shift * Mechanically operated lateral ramp shifting * Loading platform above the turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading platform: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg tare weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex works Egestorf

Koşul: yeni, azami yük ağırlığı: 31.900 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: Djdpsylfvmjfx Aldecg * Straight drawbar with 50 mm towing eye and continuously adjustable height setting ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required * SmartBoard as infotool with pressure sensors for axle load indication per axle group * 15-pin electrical connector * LED rear lights * LED beacon (removable) at the rear ----General attachments: * Warning sign packages front & rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, mounted right side * Front closed plastic single mudguards * Rear straight steel mud aprons each with spray protection (spray mist suppression) * Side underrun protection ----Low-loader platform: * Turntable platform extended by 520 mm with 45° corners and 3 recessed storage compartments including covers, lockable * Floor on turntable platform made of 50 mm and on low-loading platform of 60 mm softwood * 20 mm rubber overlay instead of wooden floor in trackway area, with a low-bed length of 6,780 mm including approach ramp * Rubber overlay on the approach ramp left and right, approx. 860 mm long * Each side with 4 pocket stakes (no stakes included) with simultaneous 2-ton lashing capacity each ----Chassis: * Chassis made of high-strength fine grain steel ----Load securing (Lasi package): Turntable platform: * 2 pairs of 13.4 ton lashing eyes in the outer frame of the turntable platform Low-bed: * Each side with 4 pairs of 10 ton drop-down lashing rings on the outer frame, loadable in all directions * Rear sides each with 2 pairs of 13.4 ton swing-out lashing rings ----Ramps: * Rubber overlay on folding loading ramps * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shift & load holding valves ----Rear support: * Hydraulic rear support ----Wideners: * 8 pairs of galvanized folding outriggers for 3 meters overall width (not included on the rear slope) * Widening planks stored in a compartment left side ----Digger stick recess: * Digger stick recess over the rear axle up to the end of approach ramp, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 ton lashing rings in the digger stick recess on each side ----Hydraulics: * Hydraulic flow divider in the trailer (with truck hydraulic pump output over 40 – max. 120 l/min) ----Loading dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm approach ramp) * Loading area above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape, sides and rear * Chassis, turntable, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images may include special equipment ----Delivery time: * Vehicle is expected to be available from week 23/2026

Koşul: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lifting and lowering function * Drawbar height adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal – no installation required on the truck side * 15-pin electrical connector * LED lighting * Front landing gear * Rear folding support legs * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Provisions in front of the bulkhead and at the rear for retrofitting 20" container locks * Bolted bulkhead made of smooth sheet metal * Foldable side walls made of trapezoidal profile steel sheet, split once in the middle * Steel rear wall, can be inserted between the ramp holders; when not in use, stored inside at the bulkhead * Bolted rear stanchions * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t fall-arrest lashing eyes every 600 mm – four lateral lashing rings installed on each side * One 6.3 t lashing ring each at the front and rear corners * Profifix lashing rail along the longitudinal axis centerline for lashing up to LC 3000 daN * Various holes in the front and rear cross member for 1.2 t lashing options * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Approach angle at rear approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized Dsdpol Th Dfefx Aldecg * Axles, springs, air tanks, flange towing eye, and landing gear painted in black tone * Side wall paintwork in a RAL color of your choice (no special or metallic finishes), changeable up to approx. 6 weeks prior to completion * --Reinforced and certified superstructure according to EN 12642 XL including load securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from approx. week 31 / 2026

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0: * EBS brake system * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not supplied), also usable as lashing points * Load securing package consisting of: 2 lashing rings (6.4 t) at front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions, integrated into the outer frame — corners rated for 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not fitted at the rear slope) * Widening planks stored in the middle of the loading area * Digger stick rest above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the digger stick rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic side-shifting of ramps * Load area over the turntable: approx. 1,960 x 2,520 mm * Unladen load height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen load height: approx. 910 mm (including 860 mm drive-on slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized Dcsdpfx Alox Ipbgedog * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from approx. calendar week 36/2026

Koşul: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lifting and lowering system * Height-adjustable drawbar, approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting * Front support winch * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the front wall exterior * Side underrun protection * Plastic quarter mudguards Dodpfsl Thvxox Aldscg * 50 mm softwood flooring * Fixtures in front of the bulkhead and rear for retrofitting 20" container locks * Bolted smooth sheet metal front wall * Side walls made of steel sheet – trapezoidal profile – center-folding, split 1x * Steel rear wall, insertable between ramps, storage bracket inside front wall when not in use * Bolted rear stakes * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for installation of 3 t recessed lashing brackets every 600 mm – 4 lashing rings fitted on each side * 1 x 6.3 t lashing ring fitted in each front and rear corner * Profifix lashing rail, centrally aligned longitudinally for lashing up to LC 3,000 daN * Various holes in front and end cross members for 1.2 t lashing options * One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Rear ascent slope approx. 860 mm * Chassis, drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tank, drawbar eye, and support winch painted black * Side wall paintwork in a customer-specified RAL color (excluding special or metallic paintwork), color changeable up to approx. 6 weeks before completion * --Reinforced and certified body as per EN 12642 XL including load securing certificate-- * New vehicle with manufacturer warranty * Subject to prior sale and errors * Available from approx. week 31 / 2026

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle with closed plastic mudguards and rear axle with straight galvanized steel skirts, each with spray guards * Lateral and rear reflective contour tape * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical plug * Four stake pockets on each side (no stakes included) with simultaneous lashing possibility Dcjdpfjx Ipb Hox Aldsg * Load securing package (La-Si package) consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV lashing rings, swiveling and retractable, loadable in all directions and recessed in the outer frame – 13.4 t in the corners, otherwise 10 t. * 6 pairs of mechanical fold-out outriggers for 3-meter total width (except at the rear incline) * Widening planks stored in the center of the loading area * Excavator arm rest over rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the excavator arm rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp displacement * Load area above the turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible total weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and intermediate sale reserved * Available from approx. week 36/2026

Koşul: yeni, azami yük ağırlığı: 31.900 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11-ton Gigant axles ----Suspension: * Air suspension with lift and lower function and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and stepless height adjustment ----Electrics / Lighting: * Tire pressure monitoring system with display option on truck display via EBS signal (no installation required on truck side) * SmartBoard infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED tail lights * LED beacon (removable) at the rear ----General Attachments: * Warning board packages front and rear * 2 x toolboxes made of galvanized, powder-coated steel approx. 650 x 300 x 600 mm, mounted on the right side * Front closed single plastic mudguards * Rear straight steel mudguards, each with spray suppression * Side underrun protection ----Low Loader Platform: * Turntable platform extended by 520 mm with 45° corners and 3 recessed storage compartments incl. lockable lids * Floor on the turntable platform made of 50 mm softwood, and on the low-bed platform of 60 mm softwood * 20 mm rubber mat instead of wooden flooring in the running area with a low-bed length of 6,780 mm including the drive-up slope * Rubber mat on the drive-up slope left and right, approx. 860 mm long * Each side with 4 stake pockets (no stakes supplied), simultaneously offering 2-ton lashing capability ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lasi Package): Turntable Platform: * 2 pairs of 13.4-ton lashing eyes on the perimeter frame of the turntable platform Low-bed Area: * Each side with 4 pairs of 10-ton lashing rings on the perimeter frame, retractable and loadable in all directions * Each side at the rear with 2 pairs of 13.4-ton swiveling lashing rings ----Ramps: * Rubber coating on the foldable drive-on ramps * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp adjustment & load-holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outrigger beams for a total width of 3 meters (not in the rear slope) * Widening planks stored on the left side in a compartment ----Excavator Arm Rest: Djdpeylfvgofx Aldjcg * Excavator arm rest above the rear axle up to the end of the drive-up slope, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4-ton lashing rings on the sides of the excavator arm rest ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output on the truck from over 40 up to max. 120 l/min) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (including 860 mm drive-up slope) * Loading area above turntable: approx. 2,990 x 2,520 mm ----Loading Height: * Loaded: approx. 890 mm, +/- 20 mm ----Paint/Finish: * Reflective contour tape on sides and rear * Chassis, turntable, drive-on ramps, and folding beams hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain optional equipment ----Delivery Time: * Vehicle available approx. from week 23/2026

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system Dcjdol Th Adspfx Aldog * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front closed plastic fenders as well as rear straight galvanized steel mudguards, each with splash protection * Side and rear conspicuity tape, reflective * Hinged lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment by means of tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included) with simultaneous lashing capability * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of swivel- and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – with 13.4 t in the corners and 10 t elsewhere * 6 pairs of mechanical folding supports for a total width of 3 meters (not in the rear slope) * Widening boards stored in the center of the loading area * Digger arm rest from the rear axle to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the digger arm rest) * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way control block for later retrofitting of hydraulic ramp shifting * Mechanically adjustable lateral ramp movement * Load area above slewing ring: approx. 1,960 x 2,520 mm * Load height unladen approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Load height unladen approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg empty weight * -- technically permissible gross weight of 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale reserved * Immediately available ex Egestorf

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, ilk tescil: 10/2013, toplam genişlik: 2.750 mm, Üretim yılı: 2013, Müller Mitteltal ITS-VLL 30.0 Profi Low Loader | 3-axle | Hydraulic Low-Bed Platform | 48 t GVW | 275 cm wide The extremely robust and stable Müller Mitteltal ITS-VLL 30.0 Profi low loader is ideally suited for the transport of machinery, construction equipment, and heavy-duty devices. It is renowned for its sturdy construction and reliability. Technical data: - Manufacturer: Müller Mitteltal - Model: ITS-VLL 30.0 Profi - Chassis no. (VIN): WMM00000D0057250 - Gross vehicle weight rating (GVWR): 48,000 kg - Axle configuration: 3-axle - Axle loads: - Axle 1: 10,000 kg - Axle 2: 10,000 kg - Axle 3: 10,000 kg - Permissible rolling load: 18,000 kg - Loading platform: low-bed design Dsdey I Si Topfx Aldscg - Loading ramps: hydraulically operated - Lower platform: hydraulically adjustable (up/down) - Tyres: good condition - Construction: all-steel chassis - Maximum speed: 80 km/h Specification & Options: - Heavy-duty low-bed configuration - Hydraulically adjustable lowered loading platform (up/down) - Hydraulic rear loading ramps - Wide (275 cm) and stable loading area - Suitable for excavators, rollers, cranes, etc. Robust construction, immediately operational Condition: The trailer is used but fully functional, with age- and use-related signs of wear. Technically a reliable and robust equipment transporter. Immediately ready for use – ideal for transport and construction companies. For more information or to arrange a viewing, please contact us. = Further Information = Axle configuration - Rear axle 1: twin tyres; max. axle load: 10,000 kg; steered - Rear axle 2: twin tyres; max. axle load: 10,000 kg; steered - Rear axle 3: twin tyres; max. axle load: 10,000 kg; steered Weights - Unladen weight: 14,500 kg - Payload: 33,500 kg - GVW: 48,000 kg Maintenance, Inspection, and Condition - Technical inspection (APK): valid until 02/2027 - Technical condition: very good - Visual condition: very good Financial information - Price: On request For further information, please contact Klaas Gerrits or Henk Gerrits.

Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, toplam genişlik: 25.000 mm, toplam yükseklik: 40.000 mm, Üretim yılı: 2014, Donanım: ABS, Araç ile ilgili talepleriniz için Seidel Bey size memnuniyetle yardımcı olacaktır (telefon numarası isteğe bağlı). MÜLLER MITTELTAL SF32BM/BT Beton Mikser Yarı Römork Üst yapı: Liebherr HTM 1004 10m³, BPW akslar, tambur frenler, yaylı akümülatör, Wabco ABS, 1. aks kaldırılabilir, havalı süspansiyon, izin verilen toplam ağırlık: 32.000 kg, boş ağırlık: 6.510 kg, taşıma kapasitesi: 25.490 kg, lastik dişi: 1. aks 14-15 mm, 2. aks 10 mm Talebiniz halinde size leasing veya finansman teklifi sunabiliriz. Seidel Bey size memnuniyetle yardımcı olur (telefon numarası isteğe bağlı). Daha fazla bilgiyi internet sitemizde bulabilirsiniz. ... Hatalar, değişiklikler ve ara satışlar saklıdır!!! = Ek Bilgiler = Djdpfeyfu Sdex Aldjcg Azami yüklü ağırlık: 32.000 kg Daha fazla bilgi için Tobias Ebert ile iletişime geçin.

Koşul: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2010, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Vehicle is being sold on behalf of a customer. Some wooden planks are damaged. 17 pairs of lashing rings. Loading height approx. 900 mm. -- Typographical errors, mistakes and alterations reserved, sample images -- More data at: !, More Details: ! Dcsdpfsyy I U Nox Aldsg

Koşul: ikinci el, boş ağırlık: 7.340 kg, azami yük ağırlığı: 22.660 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2012, yükleme alanı uzunluğu: 9.200 mm, süspansiyon: çelik, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Yükleme alanı uzunluğu yaklaşık 9.200 mm, yükseklik yaklaşık 900 mm, 16 adet bağlama halkası, araç sipariş üzerine satılmaktadır, baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler. Daha fazla bilgi için: !, More Details: ! Dcsdpfxeyy I U Aj Aldog

Koşul: ikinci el, boş ağırlık: 3.320 kg, azami yük ağırlığı: 10.180 kg, toplam ağırlık: 13.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 12/2003, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 5.040 mm, süspansiyon: çelik, lastik boyutu: 285/70R19,5 148/145J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 285/70R19,5 148/145J, arka lastik boyutu: 285/70R19,5 148/145J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Bağlama halkaları,  ,  Rampalar için ek ücret: 800 €, , -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler --, Daha fazla veri için: !, Dcodpfxjyy I S Is Aldjg

Koşul: yeni, azami yük ağırlığı: 9.070 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.010 mm, yükleme alanı yüksekliği: 325 mm, Üretim yılı: 2026, * ETS-TA-B 11,9: * Wabco EBS (elektronik fren sistemi) * RDÜ (lastik basıncı izleme) * Kampanalı frenler, 2 x 5,5 ton Gigant dingil * Parabol yaylar ve denge tertibatı * Yaklaşık 300 mm yükseklik ayarlı çekme kolu * BPW destek ayağı * Arka mekanik düşme destekleri * Ön sağda yan duvara monte plastik alet kutusu * Yan darbe koruması * LED aydınlatma * 50 mm iğne ağacı zemin * Ön duvar ve arka travers köşelerinde her biri 1 x 6,3 ton sabitleme halkası, yanlarda ise her biri 2 x 6,3 tonluk UVV sabitleme halkası dış çerçeveye entegre * Tek parça mekanik ızgara rampa, yay mekanizmalı, tek kişiyle kullanım için yaklaşık 2.350 x 870 mm (iç mesafe 20 mm, rampalar kaydırılamaz) * Ön duvar, yan duvarlar, çamurluklar ve çekme kolu sıcak daldırma galvanizli * Dingiller, yaylar, hava tankı, ön destek ayağı siyah renkte boyalı Dcjdpfxswyhzps Aldsg * Tam üretici garantisine sahip yeni araç * Hatalar ve ara satış hakkı saklıdır * Yaklaşık 35. hafta / 2026'dan itibaren teslim edilebilir

Koşul: yeni, azami yük ağırlığı: 6.900 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Support windlass at the front * Spring-assisted square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm screwed towing eye (height adjustable mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and crossbeams * Closed fenders made of sheet steel with splash guards * Closed side underrun protection can be used as an advertising area * Plastic toolbox with base inlay (horizontal installation) approx. 500 x 350 x 400 mm * Swiveling cable drum frame, clear width between the drum arms 1,700 mm with tension latch for drum securing at the support arm ends and a central claw lock securing the drum frame to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, centering and rotating ends * 1 pair of stepwise offset centering cones made of polyamide * Hydraulic lines supply and return * Chassis and hydraulic preparation for retrofit of a separate engine * 315/80 R 22.5 tires * Unladen weight: 2,690 kg * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and intermediate sale excepted * Immediately available ex Egestorf Djdpfx Aexyniwoldecg

Koşul: ikinci el, boş ağırlık: 3.110 kg, azami yük ağırlığı: 9.490 kg, toplam ağırlık: 12.600 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2016, bir sonraki muayene (TÜV): 02/2025, yükleme alanı uzunluğu: 4.550 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 600 mm, süspansiyon: çelik, lastik boyutu: 285/70R19.5, renk: mavi, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, steel body, 2 axles, turntable steering, leaf suspension, ABS (anti-lock braking system), lashing eyes, tool box, swing tailgates Djdpfx Alswth Iijdocg Body: 2-axle 3-way tipper trailer, Gigant axles, drum brakes, hot-dip galvanized frame! Loading height approx. 1290 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, süspansiyon: parabolik yaprak (yay), lastik boyutu: 235-75R17.5, Üretim yılı: 2010, 3 dingilli alçak şasi römork, arkadan yüklenebilir. Azami toplam ağırlık 30.000 kg, taşıma kapasitesi 22.700 kg. Yükleme alanı 8.900 mm (7.000 + 1.900) x 2.550 mm, aşırı genişlik için ikaz paketi, 12 yük bağlama halkası ile 8 dikme cebi, aynı zamanda bağlama imkanı, 6 adet alet kutusu. İki parçalı hidrolik rampalar yaklaşık 2.100+2.000 x 800 mm ve kauçuk kaplamalı, hidrolik arka destek. BPW akslar, EBS, dengeleme ünitesine sahip parabolik süspansiyon, lastik ölçüsü 235-75 R 17.5. Kavisli çekme kolu, döner çekme gözü 40+50 mm. 2 hatlı hava (Duomatik), 2 hatlı hidrolik, 24 volt. Boşken yükseklik yaklaşık 910 mm. Turuncu boyalı. Muayenesi 03-2027'ye kadar geçerli. = Ek Bilgiler = Lastik ölçüsü: 235-75R17.5 Süspansiyon: Parabolik süspansiyon Dodsy Evvlspfx Aldscg Boş ağırlık: 7.300 kg Yük kapasitesi: 22.700 kg Azami toplam ağırlık: 30.000 kg Üretim ülkesi: DE Daha fazla bilgi için Jan-Marc Schwickert ile iletişime geçin.

Koşul: ikinci el, azami yük ağırlığı: 4.960 kg, toplam ağırlık: 10.500 kg, ilk tescil: 04/1993, bir sonraki muayene (TÜV): 01/2026, yükleme alanı uzunluğu: 6.260 mm, yükleme alanı genişliği: 2.430 mm, yükleme alanı yüksekliği: 2.430 mm, yükleme alanı hacmi: 37 m³, Donanım: ABS, hidrolik arka platform, 2-axle tandem refrigerated trailer, 7 m, with 1-ton tail lift * THERMOKING LND-II MAX (diesel engine) and standby cooling 380 V ELECTRIC * Vehicle no. for customer inquiries: 4593 * Tail lift * Air suspension * EBS (Electronic Braking System) * Anti-lock Braking System (ABS) No liability for printing or typing errors Sale exclusively to business customers Subject to prior sale and errors. Changes, prior sale and errors expressly reserved. The description serves only as vehicle identification and does not constitute a warranty in the legal sense of a purchase. The description in the purchase contract is binding. * TOP SERVICE + QUALITY * We can provide a LEASING-FINANCING-HIRE PURCHASE offer * Warranty insurance available on request from the insurer * TÜV / UVV tail lift inspection / Tachograph testing and fitting of OBU unit by our local partners * 30-day export license plates available    All export documents possible, but must be requested separately individually * TOLL booking for Toll-Collect can be arranged in-house * Free transfer from Stuttgart Airport or Metzingen train station (Württ) * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit us on our website at Dodpfx Aeykxfljldjcg * over 200 vehicles in stock at all times

Koşul: ikinci el, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2017, bir sonraki muayene (TÜV): 05/2026, yükleme alanı uzunluğu: 6.250 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Ek bilgiler 400 mm aşağıya katlanabilir yan paneller Dedpfx Alsy Hn D Redecg - Yan panel yaylı kaldırıcı - Sökülüp takılabilir arka panel - Büyük bağlama paketi - Yükleme alanı delikli ray - Ön yükseklik ayarlı destek ayağı - Arka katlanabilir destek ayakları - Plastik alet kutusu - BPW dingiller - Yaylı ızgara rampalar

Koşul: yeni, azami yük ağırlığı: 20.500 kg, toplam ağırlık: 27.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TR 27.0 flatbed: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lifting and lowering system with RTR function * 1st axle liftable * Last axle as self-steering trailing axle with electro-pneumatic steering lock via PIN reverse gear (lock of trailing axle from the tractor for maneuvering purposes – without any truck-side installation – assigned to PIN 10 in the 15-pin connector, for maneuvering purposes only, not for use in public road traffic) * SmartBoard control box as an infotool with pressure sensors for total axle load display * Tire pressure monitoring with in-cab display via EBS signal, without need for truck-side installation * Fixed central drawbar with 50 mm flange towing eye (loaded 900 mm, adjustable height at head plate) * Mechanical landing leg at the front, mechanical swing-down support legs at the rear of the chassis * Hydraulic flow divider * Continuous side walls (without center posts) up to the drive-on slope Djdpfjr Dpzxjx Aldscg * Folding rear stanchions * Steel rear wall inserted in front of the rear stanchions * Mechanically adjustable warning sign package at front and rear * Toolboxes made of galvanized sheet steel – black powder-coated – approx. 650 x 300 x 600 mm, mounted right side * 15-pin power connector * LED rear lights * LED revolving beacon (removable), including bracket and installation * 2 x LED reversing lights at the rear of the vehicle (activated via reverse gear) * Flashing LED side marker lights * 60 mm larch/Douglas fir timber flooring * 400 mm steel front wall, plug-in * Perforated outer frame, approx. 45 degrees bent, with fixture for fitting 3 t lashing brackets * In each corner, 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings on each side * In front and end crossmembers, various holes for 1.2 t lashing options * Hydraulic, one-piece ramps approx. 3,000 x 720 mm, mechanically adjustable sideways * 4-section hydraulic control block for possible later retrofit of hydraulic ramp displacement * Chassis, drawbar, front wall, rear mechanical supports, and ramps hot-dip galvanized * Axles, air tanks, flange towing eye, and front landing leg painted in black * Hydraulic flow divider in trailer (for hydraulic pump performance in truck from over 40 l/min to 120 l/min) * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: Dsdsykx Nkspfx Aldocg * 3 x 11-ton BPW axles * Traction aid for shunting purposes, activated on the first axle via EBS (no truck-side installation required) * The last axle as a self-steering trailing axle with electro-pneumatic steering lock * Locking of the trailing axle for shunting purposes, controlled from the driver's cab via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function as well as Ride height control valve ----Electrical / Lighting: * Smart-Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * Removable LED rotating beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for extended length lighting * Side marker lights with indicator function * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swiveling supports at the rear of the chassis * Straight sheet steel mudguards * Spare wheel holder in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection lines from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with hinged lid * 400 mm high aluminium drop and removable side walls (in RAL color of choice) on the fifth wheel platform * Rear wall —150 mm— plugged in high * Rear slope on the fifth wheel platform to the low-bed, approx. 700 mm long with checker plate covering and a perforated strip at the end for attaching aluminium drive-on ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, low bed platform with 60 mm clamped wooden floorboards * Checker plate over the axles * 9 mechanical folding wideners to 3 m overall width (excluding rear slope); widening planks available with closed transverse storage compartment underneath the load platform * Preparation for 3 insertion shafts under the fifth wheel platform to store either aluminium drive-on ramps or wooden planks for covering wheel recesses * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated external frame, 45° bent, with hole pattern for lashing devices (2 t lashing capacity per point at a minimum distance of 480 mm) * 3 x 13.4 ton lashing rings recessed to the side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low Loader Platform: * 3 x 13.4 ton lashing rings on each side of the external frame (1 x at the start of the fifth wheel step, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 ton lashing rings on each side (1 x between the front wheel recess and first axle, 1 x between 2nd and 3rd axle) * 3 x 5 ton lashing rings screwed to each side of the external frames of the wheel recesses (2 at the front, 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last

Koşul: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: Dcjdoykx Nqepfx Aldeg * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Maneuvering aid for shunting purposes on the first axle, activated via EBS (no truck-side installation required) * Rear axle as self-steering axle with electro-pneumatic steering lock * Steering lock for the trailing axle, operated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function and RTR valve ----Electrics / Lighting: * Smart-Board installed on the trailer as an info tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for length extension lighting * Side marker lamps with indicator function * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Support winds at the front and swiveling supports at the rear on the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swivel arm as a carrier for connection cables from the truck to the semi-trailer ----Lowbed Deck: * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and tool box at the front made of galvanized, powder-coated steel B = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high drop-side aluminium boards on the sides of the fifth wheel platform (in RAL color of choice), foldable and removable * Rear wall insertable, 150 mm high * Rear slope on the fifth wheel platform, approx. 700 mm long with chequer plate surface and at the end a perforated bar for hooking in aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 x mechanical fold-out extensions to 3 m total width, except on the rear slope (extension boards available with closed storage compartment crosswise under the loading area) * Preparation for 3 mounting shafts under the fifth wheel platform to store either aluminium loading ramps or wooden planks for wheel well covers * Preparation for container locks on the swan neck ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled with hole pattern for lashing points (2 t lashing force per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal beams after necking, and 1 x above the center axle next to the longitudinal beam) Lowbed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the fifth wheel platform neck, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel well and 1st axle, and 1 x between 2nd and 3rd axles) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel well (2 on the front wheel well, 1 on the rear wheel well) ----Excavator boom support: * Extended excavator boom support from the end of the last rigid axle, over the steering axle, up to the end crossmember, continuous with internal reinforceme

Koşul: yeni, azami yük ağırlığı: 20.500 kg, toplam ağırlık: 27.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (electronic braking system) * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lowering function featuring RTR function * 1st axle liftable * Last axle as a trailing steering axle with electro-pneumatic steering lock via reverse gear pin (trailing axle lock for shunting purposes from the towing vehicle side - without any vehicle-side installation - assigned to PIN 10 in the 15-pin connector, only for shunting, not for use on public roads) * SmartBoard control unit as an info tool with pressure sensors for total axle load display * Tire pressure monitoring with in-cab display possible via EBS signal without any vehicle-side installation * Fixed central drawbar with 50 mm flanged towing eye (loaded height 900 mm, adjustable headplate height) * Mechanical landing gear in front, mechanical swiveling supports at the rear of the chassis * Mechanically adjustable warning signage package front and rear * Toolboxes made of galvanized sheet steel – black powder coated – approx. 650 x 300 x 600 mm, located right side * Hydraulic flow divider * Continuous side walls (without central stanchion) up to the drive-on slope * Rear stanchions foldable * Steel rear wall inserted in front of the rear stanchions * 15-pin electrical connector * LED tail lights * Removable LED beacon including holder and installation Dodsr Dpz Aepfx Aldecg * 2 x LED reverse lights at the rear of the vehicle (switched via reverse gear) * Flashing LED side marker lights * 60 mm larch/Douglas fir wooden floor * 400 mm steel front wall, slotted in * Perforated external frame approx. 45° bent, equipped for the installation of 3 t lashing brackets * One 10 t lashing ring in each corner; additionally, two 10 t and three 6.3 t lashing rings on each side * Various drill holes in the front and rear cross members for 1.2 t lashing options * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically adjustable sideways * Four-way hydraulic valve block for possible retrofit of hydraulic ramp shifting * Chassis, drawbar, front wall, mechanical rear support legs, loading ramps, tailgate hot-dip galvanized * Axles, air tanks, flanged towing eye, and front landing gear painted in a black tone * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 liters up to 120 liters/min.) * New vehicle with manufacturer warranty * Errors and prior sale excepted * Immediately available from Egestorf

Koşul: ikinci el, Üretim yılı: 2023, renk: yeşil, yükleme alanı hacmi: 11 m³, yükleme alanı genişliği: 2.420 mm, yükleme alanı uzunluğu: 5.100 mm, yükleme alanı yüksekliği: 900 mm, kilometre: 1.001 km, ilk tescil: 01/2023, vites türü: diğer, şoför kabini: diğer, Araç konumu: Bovenden, salınımlı kapaklar Üst yapı: Yaklaşık 11 m³ alüminyum yan kapaklı roll-off konteyner, toplam konteyner uzunluğu yaklaşık 5800 mm! Roll-off şasi 2023 model olup, Schwarzmüller üst yapı ise oldukça daha eskidir. Tip etiketi olmadığı için kesin üretim yılı belirlenememektedir! Dsdpsy Dvdtsfx Aldjcg Aksesuar bilgileri garanti edilmez, değişiklik, ara satış ve hata yapma hakkı saklıdır!