Kullanılmış Müller-Mitteltal 18 To, Luft, Seitliche Alu Wände, Rollplane satın al (36.399)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Agra vorbereitung
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.650 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * KA-TA-R 11.9 Masterline
----Braking System:
* Wabco EBS
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalisation unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar (adjustable by 300 mm) with 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* Multivoltage
* 15-pin power connector
* 12 V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED rear lights
----General Attachments:
* Mechanical landing gear at the front
* Two mechanical folding supports at the rear
* Plastic toolbox on the right side
* Two-step entry step at the front left (in driving direction)
* Bolted underrun protection
* Plastic quarter mudguards
----Tipper Body:
Dodpfxjl Thw Io Addout
* Net hooks on the sides and rear in the central locking bearing, plus 2 on the front wall
* Steel pallet-3-way tipping body (continuous side walls, without centre stanchions, foldable with board wall spring assist, tailgate foldable and swinging via manual central locking)
* 4 mm steel floor
* Mounting rail at the rear for loading ramps
----Load Securing:
* 1 x 5 t lashing ring in each corner
* 4 x 3 t lashing rings recessed into the outer frame on each side
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment under the loading platform, recessed into the chassis at the rear
----Tyres:
* Tyres 385/55 R 19.5
----Paintwork:
* Chassis, drawbar, tipping body, front wall, folding supports and rear stanchions hot-dip galvanised
* Axles, springs, air tanks, flange towing eye and landing gear painted black
* Side walls painted in a custom RAL colour (no special or metallic finishes), can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced body with EN 12642 XL load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Sample images
----Delivery Time:
* Available from approx. week 28 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL3 Seitenkip.- Strongw., 10 to Rampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4:
* Wabco EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Tire pressure monitoring with display option in the truck via EBS signal – no installation required on the truck side
* Drum brakes
* 2 x 7 t Gigant axles
* Parabolic springs with tandem equalizer unit
* Height-adjustable drawbar (~300 mm) with 40 mm flanged towing eye
* Jost manual landing gear at the front
* Two manual folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted at the front right side of the chassis
* 15-pin power connector
* LED rear lights 12/24 V
* Bolt-on underrun protection
* Plastic quarter mudguards
* Tie-down hooks at the positions of the central locking as well as 2 pieces at the front wall
* Chassis made of fine-grained steel
* Steel pallet-style three-way tipper body with reinforced Strong side panels (continuous side walls at the top with internal tube reinforcement – without mid-stakes – foldable with panel spring lifter)
* Rear stakes bolted
* Combination steel double-wing rear doors, asymmetrically split – can be swung and locked at 270°, not foldable – with additional pendulum frame for automatic tailgate opening during tipping operation, locking by zinc-coated rotary bolt closure at the rear and central locking, deactivation function for automatic tailgate during reverse tipping with open wing door
* Each corner equipped with one 5 t lashing point, each side with four 3 t lashing rings recessed in the outer frame
* 4 mm floor plate made of fine-grained steel
* Rear mounting rail for loading ramps
* Reinforced body with load securing certificate
* 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load bearing capacity 10 t/pair) suitable for rubber-tired & tracked vehicles
* Lockable storage compartment recessed under the loading platform at the rear in the chassis for ramps
* Drawbar, underrun protection, rear stakes and rear folding supports hot-dip galvanized
* Axles, springs, air tanks and landing gear painted in a shade of black
Dodpfex Hm Rcjx Addout
* Tyres: 358/55 R 19.5
* Side panels painted to customer’s RAL color specification (except special or metallic paint) – may be changed up to approx. 6 weeks before completion
* Errors and prior sale excepted
* Available from week 29/2026
* Sample images
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL3 Seitenkip.- Strongw., 10 to Rampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4:
* Wabco EBS (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Tire pressure monitoring with display capability in the truck via EBS signal - no truck-side installation required -
* Drum brakes
* 2 x 7 t Gigant axles
* Parabolic springs with tandem balancing unit
* Drawbar height-adjustable by approx. 300 mm with 40 mm flanged towing eye
* Jost mechanical landing gear at the front
* Rear: 2 mechanical folding supports
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on chassis
* 15-pin power connector
Dsdpsx Hm Rijfx Addsut
* LED tail lights 12/24 V
* Bolt-on underrun protection
* Plastic quarter fenders
* Net hooks at each lock location and 2 at the front wall
* Chassis made of fine-grain steel
* Steel pallet - three-way tipper body with reinforced strong side boards (continuous upper side walls with internal pipe reinforcement - without intermediate stanchions - foldable with board spring lifter
* Screw-on rear stanchions
* Combination steel swing door rear wall, 2-leaf, asymmetrically split, can be swung and locked up to 270° - not foldable - with additional pendulum frame for automatic tailgate opening when tipping, locking via galvanized rotary bar lock at the rear and central locking, deactivation function for automatic tailgate function when tipping backwards with doors open
* In each corner, 1 x 5 t lashing point and each side, 4 x 3 t lashing rings recessed in the outer frame
* 4 mm fine-grain steel floor plate
* Rear mounting rail for loading ramps
* Reinforced body with load securing certificate
* 1 pair aluminum ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles
* Rear lockable storage compartment recessed into the chassis below the loading area for ramp storage
* Drawbar, underrun protection, rear stanchion, rear folding supports hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in a black shade
* Tires: 358/55 R 19.5
* Side walls painted in customer-chosen RAL color (no special or metallic paints) – color can be changed up to approx. 6 weeks prior to completion
* Subject to errors and prior sale
* Available immediately from KW 29/2026
* Sample images
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic Braking System (EBS)
* Emergency release device for spring actuators
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizing unit
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange drawbar eye
Dujdpjxglibefx Addst
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox, front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood flooring
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth sheet metal
* Fold-down trapezoidal-profiled steel side walls with drop side spring assist
* Steel rear wall, can be slid in between the ramps—holder for storage inside the bulkhead when not in use
* Bolted rear stanchions
----Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option for installing 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various holes in bulkhead and rear cross member for 1.2 t lashing options
----Ramps:
* One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be pushed together up to 20 mm)
* Rear entry ramp angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, bulkhead, access ramps and rear wall
* Drop side color in RAL 9010 pure white
* Side wall painting in any RAL color available at extra charge
----Information:
* --Reinforced and certified body according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from week 08/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic Braking System (EBS)
* Emergency release device for spring actuators
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizing unit
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange drawbar eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox, front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood flooring
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth sheet metal
* Fold-down trapezoidal-profiled steel side walls with drop side spring assist
* Steel rear wall, can be slid in between the ramps—holder for storage inside the bulkhead when not in use
* Bolted rear stanchions
----Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option for installing 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various holes in bulkhead and rear cross member for 1.2 t lashing options
----Ramps:
Duedpfx Adoxglh Rsdet
* One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be pushed together up to 20 mm)
* Rear entry ramp angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, bulkhead, access ramps and rear wall
* Drop side color in RAL 9010 pure white
* Side wall painting in any RAL color available at extra charge
----Information:
* --Reinforced and certified body according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from week 08/2026
Küçük ilan
Schwebheim
2.317 km
Alçak şasi dorse
Müller MitteltalStaufach für Alu- Rampen
Çağrı
Koşul: yeni, süspansiyon: diğer, renk: diğer, vites türü: diğer, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Compartment for aluminium ramps, price per compartment, length approx. 2.48 m, width approx. 1 m, height approx. 27 cm. -- Subject to misprints, errors, and changes. Sample images -- For more details, see: !
Djdpjyy Urnsfx Addjut
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTALT3 Tiefl., Luft., Schwarzdeckentransporte
Çağrı
Koşul: yeni, azami yük ağırlığı: 16.400 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * T3 Profile 30.0:
* EBS-E (electronic braking system)
* TPM Tire Pressure Monitoring
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 3 x 11-ton BPW Eco axles
* Air suspension with lifting and lowering system
* SmartBoard as an information tool on the trailer, with pressure sensors for display of total axle load per axle group
* Lateral underrun protection
* Mechanically adjustable warning panel packages front and rear
Dsdpfx Asq Dyvcoddeut
* Front: closed plastic mudguards, Rear: straight galvanized steel skirts, each with spray guards
* Hinged (hot-dip galvanized) lid for the toolbox on the turntable platform
* Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm (black powder-coated), mounted on the right side
* 15-pin power connector
* LED lighting 12 / 24 V
* Removable LED rotating beacon at the rear
* Side marker lights with indicator control
* Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle
* Tire pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck)
* Rubber covering on folding ramps and on the entry slope left and right (approx. 860 mm long)
* Rubber covering on longitudinal beams from front to rear crossmember
* Hardwood flooring on running surfaces of the low-bed platform
* Four stake pockets on each side, with simultaneous 2-ton lashing capability per pocket
* Load securing package comprising: 5 pairs UVV lashing rings, swiveling and retractable, loadable from all directions and recessed in the external frame - in the corners 13.4 tons, otherwise 10 tons
* 6 pairs of mechanical folding outriggers for total width of 3 meters (not on the rear slope)
* Plank holders under the loading area, longitudinal alignment
* Raised roller stop in front of the front crossmember, with 1 x 6.4-ton lashing ring on each side
* Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves
* Hydraulic lateral ramp displacement
* Hydraulic rear support (single-stage cylinder)
* Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 up to max. 140 l/min)
* Hydraulic control block, splash-proof
* Two-line hydraulic system
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm entry slope)
* Loaded platform height: approx. 890 mm +/- 20 mm (with air suspension)
* Chassis, turntable, roller stop, folding extensions & access ramps hot-dip galvanized
* Axles, turntable, drawbar, air tanks etc. painted in black
* Loaded platform height: approx. 890 mm +/- 20 mm
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Available from CW 20/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALT3 Tiefl., Luft., Schwarzdeckentransporte
Çağrı
Koşul: yeni, azami yük ağırlığı: 16.400 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * T3 Profile 30.0:
* EBS-E (electronic braking system)
* TPMS (tire pressure monitoring system)
* Emergency release for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Air suspension with lift and lower system
* SmartBoard as an info tool on the trailer with pressure sensors to display axle loads per axle group
* Side underrun protection
* Mechanically adjustable warning sign packages at front and rear
* Front axle fully enclosed plastic mudguards and rear axle straight galvanized steel skirts, each with splash guards
* Foldable (hot-dip galvanized) lid for the toolbox on the turntable platform
* Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm (black powder-coated) mounted on the right side
* 15-pin power connector
* LED lighting 12/24 V
* Removable LED beacon at the rear
* Side marker lights with indicator activation
* Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle
* Tire pressure monitoring system with display capability in the truck via EBS signal (without truck-side installation)
* Rubber covering on folding ramps and on the approach slope left and right (approx. 860 mm)
* Rubber covering on longitudinal beams from front bulkhead to rear cross member
* Hardwood flooring on the running surfaces of the low-bed platform
* Four stake pockets each side with integrated 2 t lashing points
Duodpotplv Nsfx Addet
* Load security package consisting of: 5 pairs of UVV lashing rings, swivel-mounted and retractable, loadable in all directions and embedded in the outer frame – 13.4 t in the corners, otherwise 10 t
* 6 pairs of mechanical folding outriggers up to 3 m overall width (not on the rear slope)
* Plank holder under the loading area in longitudinal direction
* Raised roller stop in front of bulkhead with 1 x 6.4 t lashing ring each side
* Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically deployable tip section and load-holding valves
* Hydraulic lateral ramp shift
* Rear support hydraulically operated (single-stage cylinder)
* Hydraulic flow divider in trailer (for hydraulic pump capacity in truck over 40 l/min up to max. 140 l/min)
* Hydraulic control block splash-proof
* Two-line hydraulic system
* Turntable area loading deck: approx. 1,960 x 2,520 mm
* Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach slope)
* Loaded loading height: approx. 890 mm +/- 20 mm air suspension
* Chassis, turntable, roller stop, folding extensions, and ramps hot-dip galvanized
* Axles, turntable, drawbar, air tank, etc. painted in a black tone
* Loaded loading height: approx. 890 mm +/- 20 mm
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Available from calendar week 20/2026
Küçük ilan
Egestorf
2.484 km
Roll-off dorse
MÜLLER-MITTELTAL14,4 to. Tand. Cont. Absetzanh. -feuerverzinkt-
Çağrı
Koşul: yeni, azami yük ağırlığı: 12.200 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * TM-TA 14.4:
----Braking System:
* Wabco EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Drawbar Eye:
* Height-adjustable, hot-dip galvanized drawbar +/- 150 mm
* 40 mm flanged drawbar eye
----Electrics / Lighting:
* 15-pin power connector
* LED tail lights
* RDÜ tire pressure monitoring system
----General Equipment:
* Jost landing gear, front
* 2 x external drop-down supports at the rear
* Closed-type single plastic mudguards
* Foldable A-frame at the rear
* Plastic underride protection buffer
* Hot-dip galvanized underrun protection with integrated chain storage box, front left & right (dimensions: W = 370 mm x D = 420 mm x H = 480 mm)
----Load Securing:
* Each side equipped with 2 x 5.3 t UVV lashing rings for attaching tensioning elements
* Includes 2 permanently mounted ratchet tensioners with chain box on the outer frame
* Equalizing chain on both sides with eye and quick-shortener, Y special version, 6.3 t
----Container Stops:
* 2 relocatable container stops for lateral centring of containers
Duedpopk Dyxjfx Addot
* Front container stops with pendulum-type stop, can be locked in 4 positions
----Paintwork:
* Hot-dip galvanized chassis
* Axles, springs, air tanks, and landing gear painted in black
----Information:
* Lashing capacity with load securing certificate
* Subject to alterations and prior sale
* New vehicle with manufacturer warranty
----Delivery time:
* Available immediately ex stock Egestorf
Küçük ilan
Egestorf
2.484 km
Roll-off dorse
MÜLLER-MITTELTAL14,4 to. Tand. Cont. Absetzanh. -feuerverzinkt-
Çağrı
Koşul: yeni, azami yük ağırlığı: 12.200 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * TM-TA 14.4:
----Braking System:
* Wabco EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizing unit
----Drawbar / Flange Eye:
* Height-adjustable, hot-dip galvanized drawbar (+/-150 mm)
* 40 mm flange towing eye
----Electrics / Lighting:
* 15-pin power connector
* LED tail lights
* RDÜ tire pressure monitoring system
----General Attachments:
* Jost landing gear at the front
* 2 x external drop-down support legs at the rear
* Enclosed single plastic mudguards
* Foldable A-panel at the rear
* Plastic underrun protection buffer
* Hot-dip galvanized front underrun protection with integrated chain storage box, dimensions: W = 370 mm x D = 420 mm x H = 480 mm, front left & right
----Load Securing:
* 2 x 5.3 t UVV lashing rings per side for attaching tie-down elements
----Skip Stops:
* 2 removable skip stops for lateral centering of containers
* Front skip stops can be plugged into 4 positions with oscillating stops
----Paintwork:
* Hot-dip galvanized chassis
* Axles, springs, air tank, and landing gear painted in black
----Information:
* Subject to errors and prior sale
* New vehicle with manufacturer warranty
----Delivery Time:
Duedpfol Thyqox Addet
* Available immediately from Egestorf
Küçük ilan
Lübbecke
2.526 km
Konteyner taşımacılığı
Müller-MitteltalKA-TA 18
Çağrı
Koşul: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2005, Üretim yılı: 2005, Donanım: ABS, - EBS
Djdsxt Tf Ropfx Addjut
Daha fazla bilgi için lütfen bizimle iletişime geçin.
Küçük ilan
Göttingen
2.411 km
Alçak yükleyici
Müller-MitteltalT3 Kompakt - Dreiachs-Überfahr-Tieflade-Anhänger - Luft - Auffahrrampe
Çağrı
Koşul: ikinci el, makine/araç numarası: GE11/142/2022, boş ağırlık: 6.350 kg, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2008, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.500 mm, süspansiyon: hava, Çok iyi korunmuş, 1. elden araç
Üç dingilli alçak şasi geçişli treyler
Rampalı alçak şasi treyler
Ağır yük taşımacılığı
Tip: T3 Kompakt 30,0
Uzunluk: 8500 mm
Genişlik: 2500 mm
Hava süspansiyonu
Ticari/İhracat net fiyatı - 15.990 €
Değişiklik, ara satış ve hatalar saklıdır
=====
Telefon2
Mobil
=====
Dujdpfxon Aw Hks Addst
Küçük ilan
Euskirchen
2.570 km
Açık dorseli römork
SCHWARZMÜLLERAZ Pritsche 7,1m, 18 ton, Luft, BPW, Drehschemel
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 14.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2016, yükleme alanı uzunluğu: 7.100 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 950 mm, toplam genişlik: 2.550 mm, Donanım: ABS, Mobile & WhatsApp (+49 172 2194219) – Fynn Jacobsen
Schwarzmüller building material trailer in very good condition
Information in German:
* BPW axles, 9,000 kg
* Air suspension
* Disc brakes
* Aluminium air tanks
* Length-adjustable drawbar with 40 mm eye
* Pivo central lubrication system
* 2x plastic side storage boxes
* LED reversing lights
Loading dimensions:
* 7.10 m x 2.48 m x 0.95 m
* Suitable for 17 Euro pallets
* Permissible payload approx. 14.6 t
Documents:
* Load securing certificate according to DIN EN 12642 – Code XL
* COC / EC Certificate of Conformity
* Vehicle registration certificate part 1 and part 2
Duodpfxeyf R Uho Addst
The details provided in advertisements, online, price tags and images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability or warranty for typing or data transmission errors. Listed equipment must be verified individually where applicable. Subject to error and prior sale.
We are a certified workshop and official partner of Hiab, Meiler, Terberg, and HMF.
We assist with all export formalities.
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL3- Achs 30 to. Tieflader verz. hydr. Rampe NEU
Çağrı
Koşul: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2025, * T3 Profi 30.0:
* EBS braking system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 3 x 11 t Gigant axles
* Parabolic springs, mechanical axle equalization at rear
* Side underrun protection
* Rear swing-out supports mounted to chassis frame
* Mechanically adjustable warning sign packages at front and rear
* Front axle: closed plastic fenders; rear axle: straight galvanized steel skirts, each with spray guards
Dujdpfx Adol Th I Aedjt
* Reflective contour marking tape on sides and rear
* Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm
* Foldable lid (hot-dip galvanized) for the toolbox on the turntable platform
* Multi-voltage system
* LED tail lights
* Removable rotating beacon at rear
* Towing bracket with 50 mm towing eye and height adjustment via tension spring & turnbuckle
* 15-pole power plug
* 4 stake pockets per side (no stakes included), with integrated lashing options
* Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 6 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions and recessed into the outer frame – rated at 13.4 t in the corners, otherwise 10 t
* 6 pairs of mechanical fold-out outriggers for 3 m total width (not on the rear slope)
* Widening planks stored in the center of the loading area
* Hot-dip galvanized monobloc hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally
* 4-way control block for retrofit of hydraulic side ramp displacement
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm approach ramp)
* Chassis, turntable, drawbar, and ramps hot-dip galvanized
* Axles, springs, air tanks etc. painted in black
* 235/75 R 17.5 twin tires
* Approx. 5,980 kg unladen weight
* Technically permissible total weight: 30,000 kg
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
* Available from calendar week 11/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL3- Achs 30 to. Tieflader verz. hydr. Rampe NEU
Çağrı
Koşul: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0:
* EBS brake system
* RDÜ tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t Gigant axles
* Parabolic springs, mechanical rear axle compensation
* Side underrun protection
* Swing-type supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages at the front and rear
* Front axle: closed plastic mudguards; rear axle: straight, galvanized steel sheet skirts, each with spray protection
* Reflective contour tape on sides and rear
* Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm
* Foldable lid (hot-dip galvanized) for the toolbox in the bogie platform
* Multi-voltage electrical system
* LED tail lights
* Rear removable beacon
* Drawbar with 50 mm towing eye and height adjustment via tension spring & turnbuckle
* 15-pin electrical connector
* Four stake pockets per side (stakes not included), can also be used for lashing
* Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 6 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and integrated in the outer frame – in the corners rated at 13.4 t, otherwise 10 t
* 6 pairs of mechanical folding outriggers for a 3 m overall width (not at the rear taper)
* Widening planks stored in the center of the loading area
* One-piece hot-dip galvanized hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways
* Four-way control block for retrofitting hydraulic lateral ramp displacement
* Platform over fifth wheel: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
Dedjl Th Nnjpfx Addsut
* Rear platform: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope)
* Chassis, bogie, drawbar and ramps hot-dip galvanized
* Axles, springs, air tanks etc. painted in black
* 235/75 R 17.5 twin tires
* Approx. 5,980 kg unladen weight
* Technically permissible gross weight: 30,000 kg
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Available from calendar week 11/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tand.- Tiefl., breite Rampe, Gummi
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4
----Brakes:
* EBS brake system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Towing Eye:
* Height-adjustable drawbar, adjustable by 300 mm – drawbar extension by 250 mm to a total of 2,250 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required)
* 15-pin power connector
* LED tail lights 12 / 24 V
* Removable LED beacon (rear)
----General Attachments:
* Support winch at the front
* External hot-dip galvanized folding support legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead exterior
* Side underrun protection
* Plastic quarter mudguards
----Low-loader Platform:
* Preparation in front of the bulkhead for retrofitting container locks
* Bolt-on smooth sheet metal bulkhead
* Side walls made of trapezoidal-profiled steel, folding with tailgate spring lifter
* Steel rear wall slidable between the ramps (holder for stowage when not in use located inside at the front bulkhead)
* Detachable rear stanchions
* Rear approach slope approx. 860 mm
----Flooring:
* 50 mm softwood floor
* 12 mm thick and 270 mm-wide rubber cover strip on the inner side of the ramps
* On the approach slope and externally on the low-loader platform (from bulkhead to end cross member), each with a 12 mm thick and 210 mm wide rubber cover strip
----Load Securing:
* Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm
* Installation of 3 t pull-down lashing rings possible every 600 mm
* 1 x 6.3 t lashing ring each at the front and rear corners
* Various 1.2 t lashing points in the bulkhead and end cross member through multiple boreholes
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 870 mm (can be compressed to 20 mm apart)
----Paintwork:
* Chassis, drawbar, bulkhead, tailgate, and loading ramps are hot-dip galvanized
* Axles, springs, air tank, and flange towing eye painted black
* Side walls painted RAL 9010 pure white
----Information:
* --Reinforced and certified body to EN 12642 XL, including load securing certificate--
* Errors and prior sale excepted
* New vehicle with manufacturer’s warranty
Djdox Ipapspfx Addeut
----Delivery Time:
Vehicle available immediately
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tand.- Tiefl., breite Rampe, Gummi
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4
----Brakes:
* EBS brake system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Drawbar Eye:
* Drawbar height adjustable by 300 mm – drawbar extension by 250 mm to 2,250 mm
* 40 mm flange drawbar eye
----Electrics / Lighting:
* Tire pressure monitoring with indication option in the truck via EBS signal (no truck-side installation required)
* 15-pin electrical connector
* LED tail lights 12 / 24 V
* Detachable LED beacon at rear
----General Attachments:
* Landing gear at front
* Outward-facing galvanized folding supports at rear
* Plastic toolbox approx. 858 x 500 x 500 mm at front right on front wall exterior
* Side underrun protection
* Plastic quarter mudguards
----Low-Loader Deck:
* Provision in front of front wall for subsequent installation of container locks
* Bolted front wall made of smooth sheet steel
* Trapezoidal profiled steel side walls, foldable with drop-side spring assists
* Sliding steel rear wall between ramps – storage bracket for disuse inside front wall
* Bolt-on rear stanchions
* Rear drive-on gradient approx. 860 mm
----Flooring:
* 50 mm softwood floor
* 12 mm thick and 270 mm wide rubber strip on inside of ramps
* 12 mm thick and 210 mm wide rubber strips in the drive-on gradient and outer low-loader platform (from front wall to rear crossmember)
----Load Securing:
* Perforated outer frame, angled approx. 45°, with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing rings every 600 mm possible
* 1 x 6.3 t lashing ring in each front and rear corner
Djdsx Ipbaepfx Addout
* Various holes in front and rear crossmembers for 1.2 t lashing options
----Ramps:
* Single-piece mechanical grating ramps with spring assist for one-man operation, approx. 2,750 x 870 mm (can be collapsed to 20 mm clearance)
----Painting:
* Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized
* Axles, springs, air reservoir, and flange drawbar eye painted in a black tone
* Side panels painted in RAL 9010 pure white
----Notes:
* --Reinforced and certified superstructure according to EN 12642 XL including load securing certificate--
* Errors and prior sale excepted
* New vehicle with manufacturer's warranty
----Delivery Time:
Vehicle is available immediately ex Eggebostel
Küçük ilan
Koblach
2.266 km
Brandalı açık römork
SCHWARZMÜLLERHUGENTOBLER UL-18 Alu Felgen Top Zustand
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 14.050 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2011, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 2.500 mm, Üretim yılı: 2011, Donanım: ABS, * HUGENTOBLER UL-18
* Aktarma sistemi
* Brandalı kasa
Duedpfx Ajyhtnijddst
* Alüminyum taban
* Yük alanı uzunluğu: 7000 mm
* Yük alanı yüksekliği: 2500 mm
* Alüminyum jantlar
* Lastikler 385/55R22.5
* Taşıma kapasitesi: 14.050 kg
* Boş ağırlık: 3.950 kg
* Üretim yılı: 2011
* Durum: Çok iyi
* Çalışma saatleri: Pazartesi-Cuma 07:30-12:00, 13:00-18:00, Cumartesi 07:30-17:00.
* E-posta:
* Tel/Whatsapp/Viber: Alexandar Ilic
* Tel/Whatsapp/Viber İngilizce: Mladen Ilic
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu yarı römork
MÜLLER-MITTELTAL2-achs Satteltieflader 8,1 to. LG, Lenk- Achse
Çağrı
Koşul: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML
----Brakes:
* EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10 t axles
* Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN
* Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads.
----Suspension:
* Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function
----Electrics / Lighting:
* Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required
* LED tail lights 12 / 24 V
* Flashing side marker lights
* LED reversing lights switched via reverse gear
* SmartBoard installed as information tool with pressure sensors for total axle load indication only
* 7-pin socket at the rear for extra-length lighting
* Removable LED beacon at the rear
----General Attachments:
* Aluminum air tanks
* Mechanical crank landing gears
* Galvanized steel mudguards
* Swivel arm as carrier for connecting lines in front of the front bulkhead
----Warning Package:
* Mechanically adjustable warning sign package
Djdeykx I Hepfx Addjut
----Low Loader Bed:
* 50 mm floor made of larch / Douglas fir instead of spruce / fir
* Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps
* Chequer plate cover over the wheels
* SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm
* Folding top lid and side doors in the angled corners
* Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions
* Plug-in aluminum rear wall 150 mm high
* Second kingpin position
* Prepared for container lock fittings
* Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck
* Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame
----Load Securing:
Fifth-wheel platform:
* Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole
* 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline
* Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm)
* 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame
Low bed platform:
* 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck
* 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame
* 4 stanchion pockets per side integrated into the outer frame
* Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit)
----Excavator Arm Rest:
* From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest)
----Ramp:
* Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm
* Load capacity 13 t per ramp (26 t per pair)
* Hydraulic ramp adjustment on guide tube of the ramp
Küçük ilan
Egestorf
2.485 km
Alçak şasi dorse
MÜLLER-MITTELTAL2-achs Satteltieflader 8,1 to. LG, Lenk- Achse
Çağrı
Koşul: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML
----Brakes:
* EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10 t axles
* Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN
* Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads.
----Suspension:
* Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function
----Electrics / Lighting:
* Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required
* LED tail lights 12 / 24 V
* Flashing side marker lights
* LED reversing lights switched via reverse gear
* SmartBoard installed as information tool with pressure sensors for total axle load indication only
* 7-pin socket at the rear for extra-length lighting
* Removable LED beacon at the rear
----General Attachments:
* Aluminum air tanks
* Mechanical crank landing gears
* Galvanized steel mudguards
* Swivel arm as carrier for connecting lines in front of the front bulkhead
----Warning Package:
* Mechanically adjustable warning sign package
----Low Loader Bed:
* 50 mm floor made of larch / Douglas fir instead of spruce / fir
* Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps
* Chequer plate cover over the wheels
* SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm
* Folding top lid and side doors in the angled corners
* Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions
* Plug-in aluminum rear wall 150 mm high
* Second kingpin position
* Prepared for container lock fittings
* Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck
* Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame
----Load Securing:
Fifth-wheel platform:
* Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole
* 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline
* Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm)
* 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame
Low bed platform:
* 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck
* 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame
* 4 stanchion pockets per side integrated into the outer frame
* Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit)
Dujdoykx I Tepfx Addot
----Excavator Arm Rest:
* From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest)
----Ramp:
* Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm
* Load capacity 13 t per ramp (26 t per pair)
* Hydraulic ramp adjustment on guide tube of the ramp
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL19 to. Tandemtieflader mit Auffahrrampe NEU
Çağrı
Koşul: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 19.0:
* Wabco EBS brake system
* RDÜ tire pressure monitoring system
* Emergency release device for spring-loaded cylinders
* Drum brakes
Duedjl Th Hwopfx Addot
* 2 x 10 t BPW Eco axles
* Parabolic springs - 110 mm wide - with tandem equalizer assembly
* Drawbar with 50 mm flange eye and height-adjustable drawbar
* Jost landing gear at front
* Rear foldable external support legs
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED tail lights
* 50 mm softwood flooring
* Preparation in front of the bulkhead for retrofitting container locks
* Bolt-on flat steel bulkhead
* Side walls made of trapezoidal-profile steel sheeting, fold-down with drop-side spring lift assist
* Steel rear wall, slidable between the ramps, storage mount inside front bulkhead when not in use
* Rear stanchions bolted
* Perforated outer frame, approx. 45° edged, with 2 t lashing capacity every 480 mm
* Option to fit 3 t fold-down lashing rings every 600 mm
* In each corner, front and rear, 1 x 10 t lashing ring, multiple holes in the bulkhead and end cross member for 1.2 t lashing points
* Profifix lashing rail along the centre axis for lashing capacity up to LC 3000 daN
* One-piece mechanical grating ramps with spring mechanism for single-man operation, approx. 2,750 x 620 mm (can be compressed to 20 mm)
* Rear approach wedge approx. 860 mm
* Chassis, drawbar, bulkhead, rear wall, ramps and support legs hot-dip galvanized
* Body side walls painted RAL 9010 pure white
* Side walls can be painted in any RAL color for an additional charge
* Axles, springs, air tanks, flange eye and landing gear painted in black
* New vehicle with full manufacturer warranty
* Subject to errors and prior sale
* Available approx. from calendar week 21/2026
* Sample images
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL19 to. Tandemtieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 19.0:
* Wabco EBS braking system
* RDÜ tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 10 t BPW Eco axles
* Parabolic springs – 110 mm wide – with tandem equalizing unit
* Drawbar with 50 mm flange towing eye and height-adjustable drawbar
* Jost landing gear at front
* External folding supports at rear
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED tail lights
* 50 mm softwood floor
* Fixture in front of bulkhead for retrofitting container locks
* Bolted flat plate bulkhead
* Trapezoidal-profiled steel side panels, foldable with drop side spring assist
* Steel rear wall, retractable between the ramps – bracket for storage in the front bulkhead when not in use
* Bolted rear stanchions
* Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm
* Option to fit 3 t recessed lashing rings every 600 mm
* In each front and rear corner 1 x 10 t lashing ring, various holes for 1.2 t lashing options in front and rear crossmembers
* Profifix lashing rail along center axis for securing up to LC 3000 daN
* One-piece mechanical grating ramps with spring mechanism suitable for single-person operation, approx. 2,750 x 620 mm (can be compressed to 20 mm)
* Rear approach angle approx. 860 mm
* Chassis, drawbar, bulkhead, rear wall, loading ramps, and folding supports hot-dip galvanized
Dodpfx Asl Th Hlsddjut
* Side panel painting in RAL 9010 pure white
* Painting in other RAL shades available on request for additional charge
* Axles, springs, air tank, flange towing eye, and landing gear painted black
* New vehicle with full manufacturer’s warranty
* Errors and prior sale excepted
* Available approx. from calendar week 21/2026
* Sample images
Küçük ilan
Legden
2.617 km
Alçak şasi römork
MÜLLER-MITTELTALETK TA R 11,9 to Tieflader Kipper
Çağrı
Koşul: ikinci el, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2021, bir sonraki muayene (TÜV): 08/2026, yükleme alanı uzunluğu: 4.800 mm, yükleme alanı genişliği: 2.430 mm, yükleme alanı yüksekliği: 500 mm, Donanım: ABS, Müller-Mitteltal alçak şasi damperli römork
- Bir araçta hem alçak şasi hem de iki yandan damperli römork
- 40 mm çeki halkası
- Basınçlı hava fren sistemi
- Yükleme ve boşaltma için destek ayakları
- Gigant akslar
- Lastik ölçüleri: 235/75 R 17,5
- Tambur fren
- Boş ağırlık: 3.620 kg
- Yükseklik ayarlı çekme kolu
- Muayene son tarihi: 08.2026
- SP son tarihi: 02.2026
- SP son tarihi:
- Yükleme alanı uzunluğu: 4.800 mm
- Yükleme alanı genişliği: 2.430 mm
- Yan tavan yüksekliği: 0,5 m
Hatalar ve ara satış ihtimali saklıdır.
Djdpfxeyk Rfko Addout
Dahili araç numarası: 11349.
Küçük ilan
Aichach
2.196 km
Alçak şasi dorse
MÜLLER-MITTELTALTS3 hydr Rampen GIGANT LUFT
Çağrı
Koşul: ikinci el, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2004, bir sonraki muayene (TÜV): 08/2026, * Müller Mitteltal TS3 alçak şasi treyler (dorseli)
* İlk tescil: 11/2004
Duodew Tgkbspfx Addjt
* 3 aks
* Havali süspansiyon
* Gigant akslar
* Hidrolik uzun rampalar, kaydırılabilir ve katlanabilir
* Yatak genişliği 2,50 m'den 3,0 m'ye kadar artırılabilir
* Yükleme uzunluğu: 8,50 m, yükseklik: 0,85 m
* Boyun kısmında yükleme uzunluğu: 3,40 m, yükseklik: 1,50 m
* Destek ayakları
* Boş ağırlık: 10.260 kg
* Teknik toplam ağırlık: 47.000 kg
* Muayene geçerlilik: 08/2026'ya kadar
* Genel muayene: 02/2026'ya kadar geçerli
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranh. mit Container
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0
----Brakes:
* Wabco EBS-E braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* Duomatic brake coupling
----Axle:
* Two SAF axles
* First axle as lift axle (fully automatic)
* Lift axle ride height +30 mm via actuator cylinder
* Start-assist for shunting purposes and forced lowering on first axle activated via speed-dependent EBS electronics (no installation required on the truck side, includes cable for operation from the tractor)
----Air Suspension:
* Air suspension with lowering function via remote control
----Drawbar / Flange Towing Eye:
* 50 mm flange towing eye – height adjustable by +77 mm and -33 mm – for 2 t vertical load
----Electrics / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary connector
* LED lighting system 12/24V
* 2 LED reversing spotlights switched with reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* Extended connection cables for agricultural and forestry vehicles
* Wireless power supply 12+24 V via rear lamp circuit
----General Attachments:
* BPW landing leg at the front
* Mechanically extendable underrun protection for container lengths over 6,000 mm
* Speedline diamond-finish aluminium rims
* Detachable pin towing coupling (use only with underrun protection retracted)
* Enclosed plastic half-shell single fenders
* Two-step access in front of the front wall on the left
* Shovel and broom holder in front of the front wall
* 2 stainless steel toolboxes (matte), approx. 650 x 350 x 320 mm, right side
* Enclosed side underrun protection usable as advertising space
----Hydraulics:
* Twin-circuit hydraulic connections (engine side from truck/tractor) rated for 180 bar (for tractor operation)
* Double-acting control circuit for hydraulic rear door (mounted front right) operable via remote control
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift (Serial no. 100746129, year 2023)
* Base frame made from high-tensile fine-grained steel
* 20,000 kg pulling force
* Hook height 1,570 mm
* Hooklift controlled via remote control
* Remote control with quick function for lowering, not for lifting
* Emergency stop switches, left and right
* Container supports with four pads per side and one roller at the rear on each side
* Hydraulic rear internal locking
* 2 additional hydraulic cylinders to assist in lifting the main arm
* 2 mechanical drop-down supports at the rear
* Rated for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load
* Note: If the remote control is outside the charging cradle, the service brake must be applied to enable the remote. The brake lines must remain connected to allow the hydraulically/pneumatically controlled valves to open.
* Monitoring system for underrun protection ensuring it is retracted during tipping
----Loading Height:
* Unladen approx. 1,300 mm with lift axle lowered
----Paintwork:
* Chassis, drawbar, step, underrun protection and drop supports hot-dip galvanized
* Axles, air tanks, and front landing leg painted in black
* Palfinger hooklift painted in black/yellow
----Infos:
* Errors and prior sale excepted
* Vehicle is in very good / like-new condition
----Container: Dimensions:
* Load length: 5,500 mm
* Load width: 2,300 mm
* Load height: 1,000 mm
Infos:
Duedpfx Asyfy Rroddjt
* Mountings for hook systems avail...
Sizin için aramayı kolaylaştırıyoruz: "müller-mitteltal 18 to, luft, seitliche alu wände, rollplane"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.


























































































































































































































































































































































































































