Üç yöne devirmeli römorkMÜLLER-MITTELTAL
14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
Üç yöne devirmeli römork
MÜLLER-MITTELTAL
14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
sabit fiyat KDV hariç
€28.500
(€33.915 brüt)
Üretim yılı
2026
Durumu
Yeni
Konum
Egestorf 

Resimleri göster
Haritayı göster
Temel veriler
Fiyat ve Konum
sabit fiyat KDV hariç
€28.500
(€33.915 brüt)
- Satıcının konumu:
- Eichenstich 12, 21272 Egestorf, Almanya

Ara
Teknik detaylar
- Toplam ağırlık:
- 14.400 kg
- Azami yük ağırlığı:
- 10.900 kg
- Dingil konfigürasyonu:
- 2 dingil
- Yükleme alanı uzunluğu:
- 5.000 mm
- Yükleme alanı genişliği:
- 2.420 mm
- Yükleme alanı yüksekliği:
- 500 mm
Teklif detayları
- Listeleme kimliği:
- A186-01-851
- Referans no.:
- 5776
- Son güncelleme tarihi:
- 24.10.2025
Açıklama
* Wabco EBS (Electronic Braking System)
* RDÜ (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Parabolic springs with tandem equalizer unit
* Height-adjustable drawbar, hot-dip galvanized, adjustable by approx. 300 mm, with 40 mm flange towing eye
* Jost mechanical landing gear at the front
* 2 rear mechanical folding supports, hot-dip galvanized
* 15-pin electrical connector
* LED tail lights
* Bolted underrun protection, hot-dip galvanized
* Toolbox made of galvanized sheet steel, mounted on the right side
* Plastic quarter mudguards
* Hot-dip galvanized chassis
* Steel pallet 3-way tipper body
* Continuous side walls with internal tube reinforcement at the top, without central stanchions, foldable with board wall spring lifter
* Rear tailgate foldable and swinging with manual central locking
* Bolted, hot-dip galvanized rear stanchions
Ndodpfjv Dz N Nsx Aaysc
* In each corner: 1 x 5 t lashing point; laterally: 4 x 3 t lashing rings flush-mounted in the outer frame
* 4 mm floor plate made of high-strength fine-grained steel
* Net hooks, rear ramp mounting rail
* Preparation for retrofitting sidewall extensions
* Reinforced body with load securing certificate according to EN 12642 XL
* Two-step entry on the left side for access assistance
* 1 pair of aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment at the rear, recessed under the loading bed in the chassis
* Axles, springs, air tanks, and landing gear painted in black
* Chassis, drawbar, floor, front wall, folding supports hot-dip galvanized
* Brand new vehicle, no first registration, covered by manufacturer's warranty
* Tires: 385/55 R 22.5
* Sidewalls painted in RAL 9010 Pure White
* Side panel painting in any RAL color available at extra cost
* Subject to errors and prior sale
* Available from CW (calendar week)
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
* RDÜ (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Parabolic springs with tandem equalizer unit
* Height-adjustable drawbar, hot-dip galvanized, adjustable by approx. 300 mm, with 40 mm flange towing eye
* Jost mechanical landing gear at the front
* 2 rear mechanical folding supports, hot-dip galvanized
* 15-pin electrical connector
* LED tail lights
* Bolted underrun protection, hot-dip galvanized
* Toolbox made of galvanized sheet steel, mounted on the right side
* Plastic quarter mudguards
* Hot-dip galvanized chassis
* Steel pallet 3-way tipper body
* Continuous side walls with internal tube reinforcement at the top, without central stanchions, foldable with board wall spring lifter
* Rear tailgate foldable and swinging with manual central locking
* Bolted, hot-dip galvanized rear stanchions
Ndodpfjv Dz N Nsx Aaysc
* In each corner: 1 x 5 t lashing point; laterally: 4 x 3 t lashing rings flush-mounted in the outer frame
* 4 mm floor plate made of high-strength fine-grained steel
* Net hooks, rear ramp mounting rail
* Preparation for retrofitting sidewall extensions
* Reinforced body with load securing certificate according to EN 12642 XL
* Two-step entry on the left side for access assistance
* 1 pair of aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment at the rear, recessed under the loading bed in the chassis
* Axles, springs, air tanks, and landing gear painted in black
* Chassis, drawbar, floor, front wall, folding supports hot-dip galvanized
* Brand new vehicle, no first registration, covered by manufacturer's warranty
* Tires: 385/55 R 22.5
* Sidewalls painted in RAL 9010 Pure White
* Side panel painting in any RAL color available at extra cost
* Subject to errors and prior sale
* Available from CW (calendar week)
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2001
İstek gönder
Telefon & Faks
+49 40 33... ilanlar
Bu ilanlar da ilginizi çekebilir.
küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
MÜLLER-MITTELTAL14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
İlanınız başarıyla silindi
Bir hata oluştu













































































