Kullanılmış Müller-Mitteltal Tiefladeanhänger T 3 Profi 30,0 Tiefladeranhänge satın al (62.898)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranhänger
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0
----Braking System:
* Wabco EBS-E brake system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* Duomatic brake connection
----Axle:
* 2 x SAF axles, rated at required tonnage
* First axle configured as a lift axle (fully automatic)
* Lift axle with ride height +30 mm via control cylinder
* Start-assist function for maneuvering and forced lowering to the first axle — switchable via speed-dependent EBS electronic system (no installation required on the truck side, with additional cable for operation from the tractor)
----Air Suspension:
* Air suspension with lowering via radio remote control
----Drawbar / Flange Towing Eye:
* 50 mm bolted flange towing eye — height-adjustable by +77 mm and -33 mm — for 2 t support load
----Electric / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary connector
* LED lighting system 12 / 24V
* 2 LED reversing lights, actuated via reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems
* Extended connection cables for agricultural and forestry vehicles
* Wireless power supply 12V + 24V via tail light circuit
----General Attachments:
* BPW support winch at the front
* Mechanically extendable underride guard for container lengths over 6,000 mm
* Speedline diamond-finish aluminum rims
* Detachable pin-type towing coupling (use only with retracted underride guard)
* Enclosed plastic half-shell single mudguards
* Two-step access ladder in front of the bulkhead, left side (direction of travel)
* Shovel and broom holder in front of the bulkhead
* 2 matte stainless steel toolboxes approx. 650 x 350 x 320 mm, mounted laterally on the right
* Enclosed side impact protection, usable as advertising space
----Hydraulics:
* Dual-circuit hydraulic connections (engine side from truck/tractor), rated for 180 bar (tractor operation)
* Double-acting control circuit for hydraulic tailgate (mounted right, direction of travel) with remote control operation
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift device (serial no. 100746129, year 2023)
* Main frame constructed from high-strength fine-grain steel
* 20,000 kg lifting capacity
* Hook height 1,570 mm
* Hooklift operation controlled by radio remote
* Remote with fast function for unloading, but not for loading
* Emergency stop switches on both left and right sides
* Container supports: 4 lateral supports per side and 1 rear roller each side
* Hydraulic rear internal locking
* 2 additional hydraulic cylinders to assist main arm lifting
* 2 mechanical drop supports at the rear
* Approval for 20 tonnes gross vehicle weight (2 x 9 t axles) and 2 t support load
* Note: If the remote control is removed from its charging station, the service brake must be applied to enable radio operation. Brake connections must remain connected at all times to allow electro-hydraulic/pneumatic valves to open
Psdpex Dp Agefx Aibspr
* Monitoring system for underride guard to ensure it is retracted when tipping
----Loading Height:
* Unladen approx. 1,300 mm with lift axle lowered
----Paintwork:
* Chassis, drawbar, step, underride protection, and support legs hot-dip galvanized
* Axles, air tank, and front support winch painted in black
* Palfinger hooklift painted in black / yellow
----Information:
* Subject to errors and prior sale
* Vehicle is in very good / as-new condition
----Delivery Time:
* Vehicle is available immediately
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranh. mit Container
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0
----Braking System:
* Wabco EBS-E electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
* Duomatic brake coupling
----Axle:
* 2 x SAF axles, rated for high load
* First axle configured as lift axle (fully automatic)
* Lift axle travel height +30 mm via height-adjustment cylinder
* Start-assist function for maneuvering and forced lowering to first axle – activated through speed-dependent EBS electronic module (no installation required on towing vehicle, includes additional cable for in-cab operation from tractor)
----Air Suspension:
* Air suspension with lowering function via radio remote control
----Drawbar / Flanged Eye:
Pedpfsx Dp Amjx Aibspr
* 50 mm flanged towing eye - height-adjustable by +77 mm and -33 mm - for 2 t vertical load
----Electrics / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary socket
* LED lighting system 12 / 24V
* 2 LED reversing lights, activated via reverse gear
* EBS multi-voltage system, compatible with towing vehicles fitted with 12V & 24V electrics
* Extended connection cables for agricultural and forestry vehicles
* Power supply for remote control: 12+24 V via tail light circuit
----General Equipment:
* BPW manual landing gear at the front
* Mechanically extendable underrun protection for container lengths over 6,000 mm
* Speedline diamond-cut aluminium wheels
* Pin-type towing coupling (use only when underrun protection is retracted)
* Enclosed plastic half-shell single wheel guards
* Double access step, front left of the bulkhead
* Shovel and broom holder in front of the bulkhead
* 2 stainless steel toolboxes (matte finish), approx. 650 x 350 x 320 mm, mounted right-hand side
* Enclosed side underrun protection, suitable for use as advertising space
----Hydraulics:
* Dual-circuit hydraulic couplings (vehicle/tractor side) rated for 180 bar (tractor operation)
* Double-acting hydraulic control circuit for rear tailgate (mounted front right), operated via radio remote control
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023)
* Base frame constructed from high-tensile fine-grained steel
* 20,000 kg traction force
* Hook height: 1,570 mm
* Hooklift controls via radio remote
* Quick function available for discharging, not for loading
* Emergency stop button on both left and right sides
* Container mounts: each side with 4 supports plus 1 rear roller each
* Hydraulically operated rear internal locking
* 2 additional hydraulic cylinders to assist main arm lifting
* 2 x mechanical drop-down supports at rear
* Homologated for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load
* Note: If the remote control is outside the charging cradle, the service brake must be applied to enable radio operation. Brake couplings must remain connected to allow operation of the hydraulic/pneumatic control valves
* Monitoring system ensuring underrun protection is retracted before tipping
----Loading Height:
* Unladen approx. 1,300 mm with lowered lift axle
----Paintwork:
* Chassis, drawbar, access steps, underrun protection, and drop supports hot-dip galvanized
* Axles, air reservoirs, and front landing gear painted in black
* Palfinger hooklift painted black/yellow
----Information:
* Errors and prior sale excepted
* Vehicle is in very good / as-new condition
----Container Dimensions:
* Internal length: 5,500 mm
* Internal width: 2,300 mm
* Internal height: 1,000 mm
Information:
* Mounting brackets for hook s
Küçük ilan
Alsdorf
2.622 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 Breitreifen, ideal f. Landwirtschaft, Rampe
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.750 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Inquiry number: 11599
* NEW VEHICLE now immediately available in stock at Alsdorf
Pedpfx Aioyhtwwsbopr
* Versatile use: construction, landscaping, agriculture and forestry – can be used as tipper or low-loader
Müller-Mitteltal KA-TA-R 11.9 Tandem Low-Loader Three-Way Tipper Trailer with Ramps
* Tyres: 385/55 R19.5, (4 units), BPW axles, parabolic springs, drum brakes
* Tyre pressure monitoring
* GVW: 11,900 kg, payload 8,750 kg.
* EBS multi-voltage system for towing vehicles with 12 and 24 volt electrics (e.g., agricultural and forestry vehicles)
* Side marking lights with integrated turn signal function
* LED lighting system for 12+24 volts, with 1x 15-pin connection cable and an additional connection cable as standard, configuration 12 volt 13-pin with empty sockets for both electrical connectors
* Galvanised floor, 5m x 2.42m x 0.5m, laser-welded sidewalls, swinging, folding and removable, pre-fitted for later installation of sidewall extensions
* Lockable compartment under the tipping body for loading ramps
* Includes aluminium ramps, 8t load capacity, 3.57m long, stowed in ramp compartment beneath the tipper body
* Front wall hot-dip galvanised
* 4 UVV tie-down rings LC 5000daN front and rear + 8 recessed, folding tie-down lugs LC 3000daN in the tipper floor (centred)
* Continuously height-adjustable tow bar, hot-dip galvanised, towing eye 40mm
* Net hooks
* Bolted, galvanised rear stanchions
* ----
* We are a Müller-Mitteltal distributor! Request a quote from us!
* Example: €519 net per month for 60 months, no down payment, no residual value. An offer from our finance partner FM LeasingPartner
----Our business hours:
Monday - Thursday: 08:00 - 17:00
Friday: 08:00 - 15:00
Available outside business hours by appointment
We speak German, we speak English, mowimy po polsku, on parle francais,
WhatsApp
Leasing, financing, trade-in possible----
Küçük ilan
Landsberg am Lech
2.201 km
Alçak şasi römork
MÜLLER-MITTELTALT4 RM 40,0 Radmulden
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 29.750 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2010, bir sonraki muayene (TÜV): 05/2026, Ölçü-B 11.750 mm
Boş ağırlık 10.250 kg
Aks yükü 2 x 10.000 kg
Döner tabla üzerinden yükleme uzunluğu 2.400 mm (350 mm eğimli dahil)
Yükleme uzunluğu 7.700 mm (900 mm eğimli dahil)
Psdpfx Aiexpmmmjbepr
Yükleme yüksekliği 880 mm
Genişlik 2.550 mm, 3.000 mm'ye kadar genişletilebilir
Ekskavatör kolu için havuz (UxGxY yaklaşık 2.500 x 740 x 180 mm)
SAF akslar, havalı süspansiyonlu
2 parçalı hidrolik rampalar, 2.100 mm + 2.000 mm uzunluğunda, 650 mm genişliğinde dahil
Rampalar hidrolik olarak ayarlanabilir
Arkada hidrolik destek
2. akstan sonra tekerlek boşluğu
Önde tekerlek boşluğu, üst uzunluk yaklaşık 2.000 mm x 1.100 mm, alt derinlik yaklaşık 350 mm
3. ve 4. aks arasında tekerlek boşlukları
Arkada tekerlek boşluğu, üst uzunluk yaklaşık 1.300 mm x 550 mm, alt derinlik yaklaşık 220 mm
Küçük ilan
Landsberg am Lech
2.201 km
Üç yöne devirmeli römork
MÜLLER-MITTELTALKA-TA-R14,4 Kipper mit Alurampemnt
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.970 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, KA-TA-R 14,4 - Kamyon Tandem Üç Yana Devirmeli Dorse
- Seride taşıma kapasitesi yakl.: 11.050 kg
- 285/70R19.5 lastik ile toplam ağırlık 14,4 tona yükseltilebilir
- İç ölçüler: 5.000 x 2.420 x 500 mm
- Yüklü zemin yüksekliği 1.040 mm
- 1 adet sıcak daldırma galvanizli şasili ve alt korumalı gövde
- Boya: Akslar, yaylar ve hava tankı vb. siyah renkte
- Çelik zeminde gömülü ve katlanabilir 3 çift yük sabitleme halkası, LC 3.000 daN
- ABS 2 S/2 M, 24 Volt
- 500 mm yüksekliğinde çelik yan kapaklar için 2 yay kaldırıcı
- Sol ve sağda, bölünmemiş yan duvarlarda salınımlı 1 merkezi kilit
Psdpfjxmwiyjx Aibepr
Opsiyonel donanımlar:
Çelik zemine gömülü 1 çift UVV sabitleme halkası, zeminin üstünde değil
4 mm kalınlığında Hardox 450 çelik taban
Standart yerine kranklı dişli ile çekme kolu yükseklik ayarı
1 çift kenarsız alüminyum yükleme rampası (8,0 t/çift), 3.500 x 400 x 105 mm, lastikli ve paletli araçlar için uygun
Alet kutusu
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
Müller-MitteltalT40
Çağrı
Koşul: ikinci el, makine/araç numarası: 39500, boş ağırlık: 8.250 kg, azami yük ağırlığı: 31.750 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 05/1995, lastik boyutu: 235/75 r17,5 zwilling, Üretim yılı: 1995, Further information
Main and outer frame constructed from high-strength double-T profiles, grade ST 52.3, profiled longitudinally in four sections, with high-webbed front and rear end plates as well as crossmembers; frame features a flat-contoured offset drop and rear loading ramp slope (0.8 m in length) behind the bogie passage; lowest possible floor height achieved by recessed wheel wells above the rear wheels; bogie platform's front corners are chamfered at 45 degrees.
Two recessed UVV lashing rings each located on the bogie platform and on the loading ramp slope for attaching tensioning devices. Rear end equipped with wide bearings for a sixfold-supported ramp shaft. Side safety guard with protective bar compliant with EC regulations, wheel chocks with clamp safety feature.
Low-maintenance inclined roller bearing axles with automatic brake adjusters, dual-line compressed air brake system in accordance with EC standards, and parking brake.
Bogie and towing drawbar: Manufactured from double-T profiles in a welded construction with a slewing ring connection, standard drawbar length 1500 mm, fitted with 8 drawbar eyes (50 mm diameter), support leg with threaded spindle height adjustment; vehicle does not have axle load compensation!
24 Volt electrical system, two interchangeable 7-pin connection cables, large rectangular four-chamber taillights including rear fog light and reversing spotlight, front distribution box, rear outline marker lights, side marker reflectors, as well as bracket for single-line license plate.
Undercarriage made of 40 mm thick pressure-impregnated pine wood. Low-bed platform and ramp slope feature crossed upper decking, 30 mm thick, laid lengthwise; total floor thickness is 70 mm. Bogie platform features a longitudinal simple floor with a recessed, open tool box, dimensions L 700 x W 800 x D 180 mm.
Psdpfx Aisi Rixgebjpr
Ramps: Welded construction with tray sheet, cross beams, longitudinally-laid wooden decking (50 mm thick), ramp ends reinforced, ramp holding rods with turnbuckle and lock, ramps can be shifted 470 mm to each side, with perforated rail and sliding tube, ramp shaft made of bright steel, articulated arm spring lifter with external and internal springs for easy single-person operation, with automatic ground supports.
Steel shot blasted, zinc phosphate primed, single-colour acrylic finish in RAL colours, wheels painted silver, available in standard, light, and metallic colours as well as two-tone paint finishes; wood surfaces stained.
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* EBS braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Towing Bar / Flange Towing Eye:
* Towing bar height adjustable by 300 mm
* Towing bar extension by 250 mm up to 2,250 mm
----Electrics / Lighting:
* Tire pressure monitoring system with in-cab display via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
* EBS multi-voltage system for tractors with 12 and 24 V electrical systems
----General Attachments:
* Landing gear at the front
* Fold-out rear support legs externally mounted
* Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Deck:
* 50 mm softwood floor
* Preparation in front of the bulkhead for retrofit container lock fittings
* 400 mm screwed flat steel front wall
* Bolt-on stanchions at the rear
* Drop sides with spring assistors
----Load Securing:
* Perforated external frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Option for installation of 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each corner, front and rear
* Various drilled holes in the front and rear crossmembers for 1.2 t lashing points
* Profifix lashing rail in the middle longitudinal axis, lashing up to LC 3000 daN
----Ramps:
* One-piece hydraulic mesh drive-up ramps approx. 2,750 x 600 mm (can be pushed together to within 20 mm)
* Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck over 40 l/min up to max. 140 l/min)
----Painting:
* Chassis, towing bar, bulkhead, mechanical drop legs, and drive-up ramps hot-dip galvanized
* Axles, springs, air tanks, front landing gear, and flange towing eye painted in black
* Drop sides painted in RAL 9010 pure white
* Side walls can be painted in a RAL color for an extra charge
----Information:
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
Ppodpfjrwc R Rox Aibjr
----Delivery time:
* Available from approx. week 16/2026
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTALPT40 Sonderpreis, Tieflader mit hydr. Rampen
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profile:
* Wabco EBS-E (electronic braking system)
Pjdpfx Aijl Tlhrobjpr
* Emergency release device for spring brake cylinders
* Drum brakes
* 4 x 11 t Gigant axles
* Air suspension with lift and lower system and RtR valve
* Pressure gauge scale for load weight determination (axles separated into 2 air suspension circuits)
* Side underrun protection
* Swing-out supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages front and rear
* Front axle: plastic quarter mudguards with splash protection
* Rear axle: straight, galvanized steel sheet skirts with splash protection
* Reflective contour tape on the sides and rear
* EBS multi-voltage system with 12 & 24 V electrics
* 15-pin power connector
* LED lighting system 12/24 V
* Removable LED rotating beacon at the rear
* 2 LED reversing lights (activated by reverse gear)
* Drawbar with 50 mm towing eye and height adjustment
* Tool box made of galvanized, black powder-coated steel sheet, approx. 1,000 mm wide, 600 mm deep, 300 mm high
* Front extension in front of the turntable platform, approx. 490 mm long with 45° corners
* ROBOT-welded anti-slip covering on the steel plate of the turntable platform
* Load securing package consisting of: 1 x 13.4 t UVV lashing eye on left and right in front of the front wall support, 4 holes on each side of the turntable platform with 2 t lashing capacity each, 1 pair of lashing eyes (13.4 t) hanging at the rear left & right in front of the rear support, 4 pairs of UVV lashing rings (10 t) per side, pivoting and lowerable, loadable in all directions and integrated into the outer frame, 3 stake pockets per side with simultaneous 2 t lashing option
* Hot-dip galvanized mechanical folding outriggers for 3 m total width (not at the rear bevel)
* Beam holder for extensions under the chassis on the left, longitudinally
* Excavator arm holder above the rear axle up to the end beam, approx. 2,100 mm long and approx. 190 mm deep, 2 pairs of 6.4 t lashing eyes per side in the excavator arm holder
* Hardwood floor on the running surfaces of the low-loader platform
* Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) mechanically adjustable laterally
* Outer beams of the loading ramps made of hardwood
* Steel construction prepared for 6-control valve block
* Loading edge unloaded approx. 950 mm +/- 20 mm chassis
* Turntable, folding outriggers, mechanical drop supports, loading ramps hot-dip galvanized
* --Axles, air tank, drawbar painted in a black tone--
* Tyres 235/75 R 17.5
* Vehicle has a one-day registration in 07/2024 due to missing tire pressure monitoring system and was never loaded/used
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Absetzcont.-Anh., Sonderpreis
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4:
----Braking System:
* Wabco ABS braking system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
Pjdpfx Ajl Th Eysibspr
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalization unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar (+/- 150 mm)
* 40 mm bolted towing eye
----General Attachments:
* Jost landing gear at the front
* Side underrun protection
* Foldable rear A-shield
----Electrics / Lighting:
* 15-pin power connector
* Multi-chamber tail lights
----Body:
* Fixed steel front and side walls
* Removable steel rear wall
* Floor made from 50 mm softwood
* 1 sliding plate 750 x 1,000 mm positioned at the front, incl. 2 moveable trough stops at the front (plug-in, 2 positions each)
* Rear crossmember suitable for use with aluminum approach ramps, incl. 2 additional drop-down supports at the rear
----Loading Edge:
* Unladen loading edge approx. 710 mm
----Load Securing:
* 4 repositionable trough stops, can be plugged into 2 positions for lateral centering of the troughs
* On each side: 1 x (13.5 t) UVV tie-down point for attaching tensioning devices
* 2 ratchet tensioners (spindle adjustment) with equalizing chain and quick-shortener (tensioning force 6,300 kg)
----Tyres:
* Tyres: 285/70R19.5
----Wheelbase:
* Wheelbase: 1,140 mm
----Paintwork:
* Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized
* Axles, springs, landing gear, and air reservoir painted in black
----General Information:
* The vehicle has a day registration from 06/2024, has not been in use or loaded due to the absence of a tire pressure monitoring system
* Subject to prior sale and errors excepted
----Delivery Time:
* Available immediately ex Egestorf on the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Braking system:
* EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange towing eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
----Electrics / Lighting:
* Tire pressure monitoring with cab display via EBS signal – no installation required on the truck side
* 15-pin power connector
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
----General attachments:
* Front landing gear (support winch)
* Rear external folding supports
* Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood flooring
* Pre-installation in front of the bulkhead for retrofitting container locks
* 400 mm bolted smooth sheet steel bulkhead
* Bolt-on rear stanchions
* Sideboards with spring-assisted lifting
----Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing rings at 600 mm intervals
Ppjdpfx Asrwc R Asibor
* One 6.3 t lashing ring in each corner front and rear
* Various holes in the front and rear crossmembers for 1.2 t lashing options
* Profifix lashing rail along the central longitudinal axis for lashing up to LC 3000 daN
----Ramps:
* Single-piece hydraulic grating ramps approx. 2,750 x 600 mm (collapsible down to 20 mm)
* Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 litres/min up to max. 140 litres/min)
----Paintwork:
* Chassis, drawbar, bulkhead, mechanical folding supports and ramps hot-dip galvanised
* Axles, springs, air tanks, front landing gear, and flange towing eye painted in black
* Sideboards painted RAL 9010 pure white
* Side panels can be painted in a RAL colour of your choice for an additional charge
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Sample images
----Delivery time:
* Available from approx. week 16/2026
Küçük ilan
Egestorf
2.485 km
Römork
MÜLLER-MITTELTAL14,4 to. Tandem Absetzcont.-Anh., Sonderpreis
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4:
----Brakes:
* Wabco ABS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizing unit
----Tow Bar / Flange Drawbar Eye:
* Height-adjustable tow bar (+/- 150 mm)
* 40 mm bolted drawbar eye
----General Attachments:
* Jost landing gear at the front
* Side underrun protection
* Foldable rear A-plate
----Electrics / Lighting:
* 15-pin electrical connector
* Multi-chamber tail lights
Ppsdpfx Aiel Th Dmobor
----Body:
* Fixed steel front and side walls
* Removable steel rear wall
* Floor made of 50 mm softwood
* 1 sliding sheet metal plate 750 x 1,000 mm at the front, including 2 removable trough stops at the front, insertable in 2 positions
* Rear traverse for mounting aluminum loading ramps, including 2 additional rear drop stands
----Loading Edge:
* Unladen loading height approx. 710 mm
----Load Securing:
* 4 repositionable trough stops, insertable in 2 positions for lateral centering of the troughs
* On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices
* 2 ratchet tensioners (spindle adjustment) with compensating chain and quick shortener (tensioning force 6,300 kg)
----Tyres:
* Tyres: 285/70R19.5
----Wheelbase:
* Wheelbase: 1,140 mm
----Paintwork:
* Chassis, front wall, side walls, mudguards, tow bar, and rear drop stands hot-dip galvanized
* Axles, springs, landing gear, and air tanks painted in black
----General Information:
* Vehicle has a one-day registration in 06/2024 due to missing tire pressure monitoring system, and has not been loaded or used
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf on the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALPT 40 Sonderpreis, Tieflader mit hydr. Rampen
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profile:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 4 x 11 t Gigant axles
* Air suspension with lifting and lowering system, including RtR valve
* Manometer pressure gauge for load weight determination (axles separated into two air suspension circuits)
* Side underrun protection
* Swing-out support legs at the rear of the chassis frame
* Mechanically adjustable warning sign kits at front and rear
* Front axle: plastic quarter mudguards with splash protection
* Rear axle: straight galvanized steel mud flaps with splash protection
* Reflective contour tape on sides and rear
* EBS multi-voltage system with 12 & 24 V electrics
* 15-pin power connector
* LED lighting system 12 / 24 V
* Removable LED beacon at the rear
* 2 LED reversing lights (activated via reverse gear)
* Drawbar with 50 mm towing eye and height adjustment
* Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high
* Extension in front of the turntable platform, approx. 490 mm long with 45° corners
* Robot-welded anti-slip covering on the steel plate of the turntable platform
* Load securing package consisting of: in front of the bulkhead carrier left & right each 1 x 13.4 t UVV lashing ring, on each side 4 holes in the turntable platform with 2 t lashing force each, 1 pair of lashing rings (13.4 t) suspended at the rear left & right in front of the rear cross member, on each side 4 pairs of swiveling and lowerable UVV lashing rings (10 t), loadable in all directions and recessed in the outer frame, on each side 3 stake pockets with simultaneous 2 t lashing possibility
* Hot-dip galvanized mechanical fold-out extensions for 3 m overall width (not in the rear slope area)
* Plank holder for extensions under the chassis left, longitudinal orientation
* Excavator stick rest, from rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep, on each side 2 pairs of 6.4 t lashing rings in the excavator stick rest
* Hardwood flooring on the running surfaces of the low loader platform
* Hydraulically operated single-piece loading ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable
* Outer planks of the loading ramps made of hardwood
* Steel structure pre-manufactured for 6-way control valve
Psdpfx Aisl Tnu Ajbspr
* Loading edge height unladen approx. 950 mm +/- 20 mm chassis
* Turntable, fold-out extensions, mechanical supports, loading ramps all hot-dip galvanized
* --Axles, air tanks, drawbar painted in black--
* Tyres: 235/75 R 17.5
* The vehicle has a day registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Available immediately ex Egestorf
Küçük ilan
Diespeck
2.278 km
Düşük yükleyici
Müller-MitteltalT4 kompakt 40,0
Çağrı
Koşul: ikinci el, makine/araç numarası: 110, boş ağırlık: 8.320 kg, azami yük ağırlığı: 31.680 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 05/2008, yükleme alanı uzunluğu: 10.300 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: çelik, lastik boyutu: 235/75 r17,5, dingil mesafesi: 6.500 mm, renk: mavi, Donanım: ABS, * Drum brake
* 4 axles
Ppsdolpav Ujpfx Aibor
* Wheelbase 6,500 mm
* Hydraulic ramp length 2,850 mm – width 650 mm
* Loading edge height 920 mm
* Extendable to 3 m wide
Subject to errors and omissions.
Küçük ilan
Diespeck
2.278 km
Üç yönlü damperli treyler
Müller-MitteltalKA-TA 18
Çağrı
Koşul: ikinci el, boş ağırlık: 4.420 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 12/2008, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.410 mm, yükleme alanı yüksekliği: 950 mm, yükleme alanı hacmi: 12 m³, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, dingil mesafesi: 1.310 mm, renk: yeşil, Donanım: ABS, drum brake
EBS
Ppsdpfx Aerz Rtmsiber
payload 13,580 kg
side aluminium drop and swinging boards with lift springs
rear steel tailgate
BPW axles
Subject to errors and alterations
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Braking System:
* Drum brakes
* Electronic Braking System (EBS)
* Emergency release device for spring-loaded cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Eye:
* Drawbar height-adjustable by 300 mm
* Drawbar extension by 250 mm (total length 2,250 mm)
* 40 mm flange eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General Attachments:
* Jost landing leg at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox front right, exterior of the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Deck:
* 50 mm softwood flooring
* Preparation in front of the bulkhead for subsequent installation of container locks
* Bolted bulkhead made of smooth sheet metal
* Side panels made from trapezoidal profile steel plate, foldable with sideboard assist spring
* Rear wall made of steel, can be inserted between the ramps (bracket for storage provided inside in front of the bulkhead when not in use)
* Rear stanchions bolted
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity at 480 mm intervals
* Optionally, installation of 3 t drop lashing rings every 600 mm possible
* 1 x 6.3 t lashing ring in each corner at the front and rear
* Various bores in front and end crossmember for 1.2 t lashing options
Ppedpfjrvvflox Aiber
----Ramps:
* One-piece mechanical steel mesh ramps with spring-assist, suitable for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm)
* Rear approach angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, bulkhead, loading ramps, and rear wall
* Sideboard color RAL 9010 pure white
* Side panel paintwork in any RAL color available for an additional charge
----Information:
* -- Reinforced and certified body according to EN 12642 XL, incl. load securing certificate --
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from calendar week 08/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release device for spring brake cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with balancing unit
----Drawbar / Flange Drawbar Eye:
* Drawbar height adjustable by approx. 300 mm
* Drawbar extension by 250 mm to total 2,250 mm
* 40 mm flange drawbar eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General Attachments:
* Jost landing gear at front
* Externally mounted hot-dip galvanized folding supports at rear
* Plastic toolbox mounted front right externally on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Deck:
* 50 mm softwood flooring
* Pre-fitted for subsequent installation of container locks in front of bulkhead
* Bolt-on smooth steel bulkhead
* Side walls made of trapezoidal-profiled steel, foldable with drop side spring assist
* Steel tailgate, insertable between ramps (storage mount inside at front wall when not in use)
* Removable rear stanchions, bolted
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring at each front and rear corner
* Various holes for 1.2 t lashing options in the bulkhead and rear crossmember
----Ramps:
* One-piece mechanical grating ramps with spring assist for single-operator use, approx. 2,750 x 600 mm (can be compressed to within 20 mm)
* Rear drive-up angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and tailgate
* Drop side color in RAL 2011 deep orange
* Painting of side walls in custom RAL color available at extra charge
----Information:
Psdpfx Aiexglibsbopr
* --Reinforced and certified structure in accordance with EN 12642 XL including load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from calendar week 08/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic Braking System (EBS)
* Emergency release device for spring actuators
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizing unit
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange drawbar eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox, front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
Ppsdeq Dyvvopfx Aibor
* 50 mm softwood flooring
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth sheet metal
* Fold-down trapezoidal-profiled steel side walls with drop side spring assist
* Steel rear wall, can be slid in between the ramps—holder for storage inside the bulkhead when not in use
* Bolted rear stanchions
----Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option for installing 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various holes in bulkhead and rear cross member for 1.2 t lashing options
----Ramps:
* One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be pushed together up to 20 mm)
* Rear entry ramp angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, bulkhead, access ramps and rear wall
* Drop side color in RAL 9010 pure white
* Side wall painting in any RAL color available at extra charge
----Information:
* --Reinforced and certified body according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from week 08/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brake System:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release device for spring brake cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating aggregate
----Drawbar / Flange Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm, total 2,250 mm
* 40 mm flange towing eye
----Lighting / Electrics:
* TPMS (tyre pressure monitoring system)
* LED lighting
----General Equipment:
* Jost landing leg at the front
* Externally mounted, hot-dip galvanized rear folding supports
* Plastic toolbox at the front right on the bulkhead exterior
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Deck:
* 50 mm softwood floor
* Fixture in front of the bulkhead for retrofitting container locks
* Bolted smooth steel bulkhead
* Drop sides made of trapezoidal steel sheet, foldable with drop side spring assists
* Rear wall made of steel, retractable between the ramps – storage bracket when not in use in front of the bulkhead
* Rear stanchions bolted
----Load Securing:
Psdpfjxglh Rsx Aibjpr
* Perforated outer frame angled approx. 45° with 2 t lashing capacity every 480 mm
* Optional installation of 3 t recessed lashing rings every 600 mm
* One 6.3 t lashing ring in each corner at the front and rear
* Various holes in front and rear crossmembers for 1.2 t lashing capability
----Ramps:
* One-piece mechanical grating ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be pushed together down to 20 mm)
* Rear approach slope approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis, drawbar, bulkhead, access ramps and rear panel
* Drop side colour RAL 2011 deep orange
* Optionally, side panels can be painted in any RAL colour at extra charge
----Info:
* --Reinforced and certified bodywork according to EN 12642 XL, including load securing certificate--
* New vehicle with manufacturer’s warranty
* Subject to alterations and prior sale
----Delivery time:
* available from CW 08/2026 (week 8/2026)
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 14.4:
----Braking system:
* EBS braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange eye:
* Drawbar height-adjustable by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* TPMS tire pressure monitoring system
* 15-pin electrical connector
* LED lighting
----General fittings:
* Landing gear (support winch) at the front
* Rear external folding supports
* Plastic toolbox approx. 858 x 500 x 500 mm, front right, fitted externally on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low-loader platform:
* 50 mm softwood flooring
* Preparation in front of the front wall and at the rear slope for subsequent installation of container locks for transporting 20" containers
* Bolted, smooth sheet metal front wall
* Side walls made of trapezoidal-profiled steel, centre-split and foldable
* Steel rear wall insertable between ramp brackets; can be stowed inside at front wall when not in use
* Bolted rear stanchions
----Load securing:
* Perforated external frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring at each front and rear corner
* Various holes in the front and rear cross members for 1.2 t lashing capability
----Ramps:
* One-piece mechanical grating ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
* Rear approach angle approx. 860 mm chassis
Pedpev Eq Evjfx Aibepr
----Wheelbase:
* Wheelbase 1,140 mm
----Paint finish:
* Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized
* Axles, springs, air tank, flange towing eye, and landing gear painted in black shade
* Drop side boards painted RAL 9010 pure white
* Side wall painting in an RAL color of choice possible at extra cost
----Information:
* Reinforced and certified construction according to EN 12642 XL, incl. load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex location Egestorf on the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to Tand- Tiefl mit 2- Seitenkipper
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.400 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * ETK-TA-R 14.4:
----Brakes:
* EBS
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
Ppodpfstr Sucex Aibor
* Parabolic springs with tandem equalization unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar, 300 mm range, with 40 mm flange towing eye
----Electrics / Lighting:
* Tire pressure monitoring system with display capability in the truck via EBS signal, no truck-side installation required
* 15-pin power connector
* LED tail lights
----General Attachments:
* Mechanical support winch at the front
* Rear: 2 mechanical folding supports
* Plastic toolbox, approx. 750 x 350 x 300 mm, right-hand side
* Bolted underrun protection
* Plastic quarter mudguards
----Chassis:
* Main frame made of high-strength fine-grain steel
----Tipping Body:
* Net hooks on the sides and rear in the central locking mounts plus 2 pieces on the front wall
* 2-way pallet steel tipper body, fixed front wall of smooth sheet, continuous drop sides (without center stanchions, fold-down with sideboard spring assist) and swinging via manual central locking
* Rear stanchions bolted
* Steel rear wall inserted in front of the ramps
* 1 x 5 t lashing point in each corner and 4 x 3 t lashing rings each side, recessed in the outer frame
* 4 mm fine-grain steel floor
----Ramps:
* Two-part mechanical steel grid access ramps with aluminum tip, 2,150 + 1,300 mm x 600 mm (can be manually telescoped to 80 mm overlap)
----Paintwork:
* Chassis, drawbar, rear stanchions, underrun protection, mechanical drop supports, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and support winch painted in black tone
* Drop sides and platform painted RAL 9010 pure white
* Side wall and tipping body paintwork in any RAL color available at extra charge
----Info:
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from week 07/2026
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL14,4 to Tand- Tiefl mit 2- Seitenkipper
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.400 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * ETK-TA-R 14.4:
----Brakes:
* EBS (Electronic Braking System)
* Emergency release mechanism for spring-actuated cylinders
* Drum brakes
----Axle:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer assembly
----Drawbar / flange eye:
* Height-adjustable drawbar by 300 mm with 40 mm flange towing eye
----Electrics / Lighting:
Ppedpfx Aotr St Ueiber
* Tire pressure monitoring system with readout in truck via EBS signal, no installation required on truck side
* 15-pin power connector
* LED tail lights
----General accessories:
* Mechanical support winch at the front
* 2 mechanical folding supports at the rear
* Plastic tool box approx. 750 x 350 x 300 mm, mounted on right side
* Bolted underrun protection
* Plastic quarter mudguards
----Chassis frame:
* Main frame made of high-tensile fine-grained steel
----Tipper body:
* Mesh hooks on the sides and rear at the central locking bearings, plus 2 hooks at the front wall
* Steel pallet - 2-way tipper body with fixed steel front wall, continuous smooth steel side walls, folding without center stanchions using drop-side spring lifters, also swinging via manual central locking
* Rear stanchions bolted
* Steel rear panel slid in front of the ramps
* 1 x 5 t lashing point in each corner, 4 x 3 t lashing rings recessed per side in the outer frame
* 4 mm floor made of fine-grained steel
----Ramps:
* Two-part mechanical grating ramps with aluminium nose sections, 2,150 + 1,300 mm x 600 mm (manually retractable to 80 mm)
----Paintwork:
* Chassis, drawbar, rear stanchions, underrun protection, mechanical supports, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, flange eye, and support winch painted in black tone
* Sideboards and tipper body finished in RAL 9010 pure white
* Optional: painting of side walls and tipper body in any RAL color available at additional cost
----Additional information:
* New vehicle with manufacturer’s warranty
* Subject to prior sale and errors
----Delivery time:
* Available from week 07/2026
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 14.4:
----Braking System:
* EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizer assembly
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin power connector
* LED lighting
----General Attachments:
* Support windlass at the front
* Externally mounted folding support legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, located front right on the outside of the front wall
* Side underrun protection
* Plastic quarter fenders
Podsv D Tcbspfx Aibjpr
----Low Loader Platform:
* 50 mm softwood floor
* Preparation in front of the front wall and rear incline for retrofitting container locks for transporting 20" containers
* Bolted front wall made of smooth sheet metal
* Drop-side walls made of trapezoidal-profile steel sheet, foldable, split in the middle (1x)
* Steel rear wall, can be slid in and stored between the ramp mounts or in front of the front wall when not in use
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame, angled at about 45 degrees with 2 t lashing capacity every 480 mm
* Option to install 3 t drop-type lashing rings every 600 mm
* In each corner at front and rear, 1 x 6.3 t lashing ring
* Various holes in the front and end cross members for 1.2 t lashing capability
----Ramps:
* One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm)
* Rear ramp angle approx. 860 mm chassis height
----Wheelbase:
* Wheelbase 1,140 mm
----Paint Finish:
* Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and support windlass painted in black
* Sideboards painted in RAL 9010 pure white
* Painting of side walls in RAL color of your choice at extra cost
----Information:
* Reinforced and certified body according to EN 12642 XL, including load securing certificate
* New vehicle with manufacturer warranty
* Subject to prior sale and errors excepted
----Delivery Time:
* Available immediately ex works Egestorf (A7 motorway)
Küçük ilan
Schlierbach
2.315 km
Düşük yükleyici
Müller-MitteltalT4 4-Achs Tieflader Radmulden luftgefedert T4 4...
Çağrı
Koşul: ikinci el, ilk tescil: 11/2006, Üretim yılı: 2006, MÜLLER - MITTELTAL T4 Kompakt Döner Tabla - Alçak Şasi Dorsesi, havalı süspansiyon ve teker çukuru ile
- 4 x havalı süspansiyonlu GIGANT aks
- havalı süspansiyonlu
- 4 x teker çukuru
- mekanik rampa
- arkada 2 destek, katlanabilir
- uzatılabilir uyarı levhaları
- ABS
- MICHELIN lastikler: 235/75 R 17.5
- ağır model: 40.000 kg azami yüklü ağırlık
- boş ağırlık: 8.400 kg
- toplam uzunluk: 11.750 mm
- 50 mm çeki halkası
Özellikle kalk freze makineleri taşımak için uygundur!
- Alman römorku
- Muayene / teknik kontrol istek üzerine ve ek ücretle mümkün!
Ppjdpfxowmpbde Aibsr
Hata ve ön satış hakkı saklıdır!
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.620 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, *KA-TA-R 11.9:*
Brakes:
- Electronic Braking System (EBS)
- Emergency release device for spring brake cylinders
- Drum brakes
Axle:
- 2 x 5.5 t Gigant axles
Suspension:
- Parabolic springs with tandem equalizer unit
Drawbar / Drawbar Eye:
- Height-adjustable (300 mm) hot-dip galvanized drawbar with 40 mm flange drawbar eye
Electrics / Lighting:
- Tire Pressure Monitoring System (TPMS)
- 15-pin electrical connector
- LED tail lights
General Attachments:
- Jost mechanical landing gear, front
- 2 mechanical hot-dip galvanized folding supports, rear
- Toolbox made of galvanized sheet steel, right side
- Hot-dip galvanized bolted underrun protection
- Toolbox made of galvanized sheet steel, right side
- Plastic quarter mudguards
Podsm Angvspfx Aibspr
Tipper Platform:
- Mesh hooks on the sides and rear at the central locking mounts, plus 3 on the front wall
- Hot-dip galvanized chassis
- Steel pallet 3-way tipper body
- Continuous side walls, foldable without center stanchions, with drop side spring assist
- Tailgate foldable and swingable via manual central locking
- Bolted hot-dip galvanized rear stanchions
- 4 mm steel floor plate
- Preparation for later retrofit of side wall extensions
- Platform length: 5.5 meters
Load Securing:
- Each corner with 1 x 5 t lashing point
- Each side with 4 x 3 t lashing rings recessed in the outer frame
Ramps:
- Mounting rail at rear for loading ramps
- 1 pair aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
- Lockable storage compartment under the load platform, integrated into the chassis from the rear
Wheelbase:
- Wheelbase: 990 mm
Tyres:
- Tyres: 235/75R17.5
Paintwork:
- Axles, springs, air tank, drawbar, and landing gear painted in black
- Platform body color: RAL 9010 pure white
- Painting of side walls and tipper platform in a different RAL color possible at extra cost
Information:
- Reinforced body with EN 12642 XL load securing certificate
- New vehicle without initial registration with manufacturer’s warranty
- Subject to errors and prior sale
Delivery Time:
- Available immediately ex stock Egestorf (A7)
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
Çağrı
Koşul: yeni, azami yük ağırlığı: 8.620 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9:
----Brakes:
* Electronic braking system (EBS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axles
----Suspension:
* Parabolic springs with tandem balance unit
----Drawbar / Flange Eye:
* Hot-dip galvanized, height-adjustable drawbar (300 mm adjustment) with 40 mm flange towing eye
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* LED tail lights
----General attachments:
* Jost mechanical landing leg at the front
* Two rear mechanical, hot-dip galvanized folding supports
* Tool box made of galvanized sheet steel, mounted on the right side
* Bolted hot-dip galvanized underrun guard
* Plastic quarter mudguards
----Tipper body:
* Mesh hooks on the sides and rear in the central locking mounts, plus three on the front wall
* Hot-dip galvanized chassis
* Steel pallet – 3-way tipper body
Pjdpfxel Thx Es Aibjpr
* Continuous, fold-down side walls without central stanchions, fitted with drop-side spring lifts
* Tailgate foldable and swinging, controlled via manual central locking
* Hot-dip galvanized bolted rear stanchions
* 4 mm steel floor plate
* Preparation for subsequent installation of side wall extensions
* 5.5-meter-long body
----Load securing:
* 1 x 5 t lashing point in each corner
* 4 x 3 t lashing rings recessed into the outer frame on each side
----Ramps:
* Rear ramp rails for loading ramps
* 1 pair of aluminum ramps, approx. 3,310 x 400 mm (8 t capacity per pair), suitable for rubber-tired and tracked vehicles
* Lockable rear storage compartment beneath the platform, integrated into the chassis
----Wheelbase:
* Wheelbase: 990 mm
----Tyres:
* Tyres: 235/75R17.5
----Paintwork:
* Axles, springs, air tanks, drawbar, and landing leg painted in black
* Body paintwork: RAL 9010 pure white
* Painting of side walls and tipper body in any other RAL colour available at extra cost
----Additional information:
* Reinforced body with EN 12642 XL load securing certificate
* New vehicle without first registration, with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery time:
* Available immediately from Egestorf on the A7
Sizin için aramayı kolaylaştırıyoruz: "müller-mitteltal tiefladeanhänger t 3 profi 30,0 tiefladeranhänge"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.















































































































































































































































































































































































































































