Kullanılmış Müller-Mitteltal 11,9 To. Plateau, Luft, 3 M. Cont.- Verriegelung satın al (62.561)

Durum: yeni, azami yük ağırlığı: 8.900 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Platform: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B-dimension approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrical / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 LED beacon (removable, incl. holder) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign sets front and rear * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each side left & right * Side underride protection * Rear underride guard * Plastic quarter mudguards ----Loading Area: Hsdpfoy U A Efsx Anfet * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable up to 3 m container outer width) and lockable, locking dimension retracted as per ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm ----Load Securing: * Perforated outer frame angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible - laterally, 5 x 3 t UVV lashing rings on each side installed * In each corner front and rear, 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the end beam) * Various bores in the front and end beams for 1.2 t lashing points ----Ramps: * 1 pair of aluminum slot-in ramps approx. 3,310 x 410 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Rear stowage compartment integrated under the loading area in the chassis ----Coating: * ---Chassis, drawbar, front wall, underrun protection as well as rear supports hot-dip galvanized--- * Axles, air tanks, front support winch as well as flange drawbar eye painted in a black tone ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample pictures ----Delivery time: * Available from approx. week 38/2026

Durum: yeni, azami yük ağırlığı: 8.900 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by approx. 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in B-dimension approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 removable LED beacon (incl. holder) at the rear Hsdpjy U A Elofx Anfet * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign packages front and rear * Landing gear at front * External folding rear supports * Plastic toolboxes approx. 750 x 350 x 300 mm on left and right sides * Side underrun protection * Rear underrun protection * Plastic quarter fenders ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable, locked dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN-compliant) with an overall external width of 3,000 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t drop-lashing brackets possible every 600 mm – fitted with 5 x 3 t UVV lashing brackets on each side – * Each front and rear corner fitted with 1 x 6.3 t lashing ring (front just behind the container locks in the wooden floor, rear on the end member) * Various holes in the front and rear member for 1.2 t lashing options ----Ramps: * 1 pair of aluminium slide-in ramps, approx. 3,310 x 410 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Rear accessible storage compartment under the loading area integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front landing gear, and flange towing eye painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available from approx. week 38/2026

Durum: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: Hodpov D Tbkofx Anfst * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B dimension of approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin connector * LED lighting system 12/24 V * 2 additional LED reversing lights at rear (operated via reverse gear) * 1 removable LED beacon (including holder) at rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 meter warning panel sets at the front and rear * Support crank at the front * Rear external folding supports * Plastic toolboxes approx. 750 x 350 x 300 mm, mounted on left and right sides * Lateral underrun protection * Rear underrun guard * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable, locking dimension retracted per ISO - DIN 15190 = 2,259 mm; container locks extended = 2,819 mm (this dimension is not to DIN) for an absolute external width of 3,000 mm ----Load Securing: * Perforated outer frame, angled approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing eyes every 600 mm - 5 x 3 t UVV-certified lashing eyes installed on each side - * At each front and rear corner: 1 x 6.3 t lashing ring (front, directly behind the container locks in the wooden floor, and rear in the end cross member) * Various holes for 1.2 t lashing points in front and rear cross members ----Ramps: * 1 pair of aluminium slide-in ramps, approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Storage compartment at the rear, recessed in the chassis under the loading area ----Paintwork: * ---Chassis, drawbar, front wall, underrun guard, and rear supports hot-dip galvanized--- * Axles, air tanks, front support crank, and flange towing eye painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 39/2026

Durum: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Braking System: * EBS (Electronic Braking System) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B-dimension approx. 8,080 mm) * 40 mm flange towing eye ---- Electrical / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 removable LED rotating beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: Hjdpfxsv D Tbds Anfet * Mechanically adjustable 3 m warning sign packages at the front and rear * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each, mounted left & right side * Side underrun protection * Rear underrun guard * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN-compliant) at an absolute external width of 3,000 mm ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm – 5 x 3 t UVV lashing brackets installed per side * In the corners at the front and rear, one 6.3 t lashing ring each (front directly behind the container locks in the wooden floor, rear in the end crossmember) * Various bores in the front wall and end crossmember for 1.2 t lashing options ----Ramps: * 1 pair of aluminum drive-on ramps approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment below the loading area, integrated in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun guard, and rear supports hot-dip galvanized--- * Axles, air tank, front support winch, and flange towing eye painted in a shade of black ----Additional Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 39/2026

Durum: ikinci el, kilometre: 1.100 km, vites türü: diğer, renk: beyaz, toplam ağırlık: 32.000 kg, boş ağırlık: 6.600 kg, azami yük ağırlığı: 25.400 kg, lastik boyutu: 425/65R22,5, ilk tescil: 03/2016, süspansiyon: hava, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, air suspension, first axle liftable, ABS (anti-lock braking system), underrun protection, landing gear Superstructure: Liebherr concrete mixer model HTM 1004, approx. 10 m³, 2x 10t BPW axles! Suitable hydraulics for engine PTO on the towing vehicle available at extra cost! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Hjdpfx Anoi Rk Axjfst

Durum: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Platform: * Mesh hooks on the sides and rear within the central locking mounts, plus 2 hooks on the front wall * Steel pallet three-way tipper body (continuous sidewalls – without intermediate stanchions – foldable, with tailgate spring assist) * Bolted rear stanchions * Combination steel double rear wing doors, asymmetrically split, 270° swing and lockable but not foldable, plus additional pendulum frame for automatic tailgate opening during tipping. Locking via galvanized locking bar and central locking. * Deactivation feature for automatic rear tailgate when tipping backward with an open wing door * 4 mm steel floor plate * Ramp rack at rear for drive-up ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing eyes on each side, integrated in the outer frame ----Ramps: Hedsl Thymepfx Anfot * 1 pair of aluminum drive-up ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment fitted underneath the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical drop legs: hot-dip galvanized * Sidewalls and tailgate: painted RAL 9010 pure white * Other RAL colors for sidewalls available at extra cost * Axles, springs, flange towing eye, air reservoirs, and landing leg: painted in black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, sold with manufacturer's warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf at the A7

Durum: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Braking System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles Hedpfx Asl Thyxjnfot ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye ----General Accessories: * Jost mechanical support winch at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic tool box, approx. 750 x 350 x 300 mm, mounted laterally on the right * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Body: * Mesh hooks on the side and rear at the central locking mounts, plus 2 on the front wall * Three-way steel pallet tipper body (continuous side walls – no center stanchions – can be folded down with board wall spring lifter) * Rear stanchions bolted * Combo steel wing doors, rear, 2-leaf, asymmetrically split, can pivot and lock up to 270°, not foldable, plus with additional swinging frame for automatic rear flap opening during tipping; locking via galvanized turn bar lock and central locking system * Deactivation function for automatic rear flap operation when tipping in reverse with the wing door open * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment accessible from the rear, recessed under the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper bed, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Painting of side walls in a different RAL color available at extra charge * Axles, springs, flange eye, air tanks, and support winch painted black ----Information: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle, unregistered, with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: * Available immediately ex Egestorf on the A7

Durum: ikinci el, ilk tescil: 06/1998, toplam ağırlık: 18.000 kg, boş ağırlık: 4.200 kg, renk: beż, vites türü: diğer, emisyon sınıfı: hiçbiri, çalışma saatleri: 8.640 h, azami yük ağırlığı: 13.800 kg, bir sonraki muayene (TÜV): 09/2026, süspansiyon: çelik, yükleme alanı uzunluğu: 7.100 mm, yükleme alanı genişliği: 2.470 mm, lastik boyutu: 235/75 R17.5, ön lastik ölçüsü: 235/75 R17.5, arka lastik boyutu: 235/75 R17.5, şoför kabini: diğer, Donanım: aydınlatma, basınçlı hava freni, ek farlar, kamyon kaydı, sisal lambaları, şasi, Müller Mitteltal 2 Akslı (eski konteyner) platform/düz yataklı römork TM 2 * SAF akslar * Çift lastikli * Yapraklı süspansiyon * Lastik ölçüsü: 235/75 R17.5 * Mükemmel kalan diş derinliği * Sağ tarafta 2 adet alet kutusu * DUO-Matic bağlantı * 50 mm çekme çubuğu * Konteynerler için yanlarda durdurma elemanları * Yanlarda çeşitli bağlama noktaları * Yükseklik: 1,04 m Hsdpfxozrh E Aj Anfjt * Ölçüler: Uzunluk: 7,10 m, Genişlik: 2,47 m * Ağırlıklar: Toplam ağırlık: 18.000 kg, Boş ağırlık: 4.200 kg, Faydalı yük: 13.800 kg * Alman aracı ve Alman belgeleri!! * İlk sahibi!! * İlk tescil tarihi: 19.06.1998 * TÜV (teknik muayene) geçerlilik süresi: 09/2026'ya kadar * SP (periyodik muayene) geçerlilik süresi: 03/2026'ya kadar * VIN: WMM00000W0042223 Satışa sunulması, hatalar ve değişiklikler saklıdır! Resimlerdeki bazı şirket logoları kaldırılmıştır - lütfen bilgi alın! Ek özelliklerin işlevselliği garanti edilmez! İletişim kişiniz: Christoph Ott Tel. + WhatsApp:

Durum: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release system for spring brake cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Height-adjustable drawbar, 300 mm range * 40 mm flange towing eye ----General Attachments: * Jost landing gear at the front * External foldable support legs at the rear * Plastic toolbox, front right, mounted externally on the front bulkhead * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ (tyre pressure monitoring) * LED lighting ----Loading Platform: Hsdpfel Th Ncsx Anfst * Loading length 5.37 m * 50 mm softwood floor * Bolted front bulkhead made of smooth sheet steel * Drop sides made of trapezoidal profiled steel, foldable, with drop side spring assist * Rear wall made of steel, can be slid between the ramp holders forward of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * One 6.3 t lashing ring in each front and rear corner * Various holes in front and end crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical steel grating ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Approach slope at rear approx. 860 mm chassis height ----Tyres: * 235/75 R 17.5 tyres ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, bulkhead, tail gate, support legs, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and 40 mm flange towing eye painted black * Drop sides painted in RAL2011 deep orange * Sides can be painted in any RAL color at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Available immediately ex works Egestorf

Durum: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release device for spring-actuated cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Towing Eye / Flange Tow Eye: * Towing bar adjustable in height by 300 mm * 40 mm flange tow eye ----General Attachments: * Jost landing gear front * Exterior folding support legs at the rear * Plastic toolbox, front right, mounted externally on the front wall * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Loading platform 5.37 m * 50 mm softwood floor * Bolted front wall made of smooth sheet metal * Drop sides made of trapezoidal-profiled steel, foldable with drop side spring assist * Steel rear wall, slide-in panel between ramp holders - stowed in front of the front wall when not in use * Rear stakes bolted ----Load Securing: * Perforated outer frame, angled approx. 45 degrees with 2 t lashing capacity at 480 mm intervals * Option to equip with 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various holes for 1.2 t lashing options in the front and rear crossmembers ----Ramps: Hodel Th Nrjpfx Anfst * One-piece mechanical grating access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Approach slope at the rear approx. 860 mm chassis height ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, front wall, tailgate, folding supports, and access ramps hot-dip galvanized * Axles, springs, air tanks, 40 mm flange tow eye painted in black * Sideboard painted RAL2011 deep orange * Painting of side panels in any RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Durum: ikinci el, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2012, bir sonraki muayene (TÜV): 09/2028, Üretim yılı: 2012, Dahili araç numarası: G300402 Hemen Kaufungen’deki sahamızda hazırdır Daha fazla bilgi için: * Golec Nutzfahrzeuge GmbH (Almanca, İngilizce, Bulgarca, Rusça) * Viktoria Sologubova (Lehçe, Rusça, Ukraynaca, İngilizce) Model yılı: 2012 Dorse boş ağırlığı: 6.530 kg Beton mikser dorse LIEBHERR 10 m³ Hodsxy Ul Sjpfx Anfjt Hatalar ve değişiklikler saklıdır Kullanılmış aracınızı takas olarak memnuniyetle kabul ediyoruz. Finansman doğrudan firmamızda mümkündür. GOLEC NUTZFAHRZEUGE GMBH Konuştuğumuz diller: Almanca, İngilizce, İspanyolca, Lehçe, Ukraynaca, Rusça, Bulgarca.

Durum: yeni, azami yük ağırlığı: 15.970 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 21,0: ----Fren: * Wabco EBS-E (elektronik fren sistemi) * Yaylı akümülatör silindiri için acil serbest bırakma mekanizması * Tamburlu frenler ----Aks: * 2 x 11 tonluk Gigant akslar ----Süspansiyon: * Kaldırma ve alçaltma sistemi ile hava süspansiyonu ----Çekme çubuğu / Flanşlı çekme bağlantısı: * 50 mm flanşlı çekme bağlantısı ve yüksekliği ayarlanabilen çekme çubuğu ----Aydınlatma / Elektrik: * 15 kutuplu güç konektörü * LED lambalar 12/24 V * Lastik basıncı izleme sistemi (TPMS) ----Genel Montaj Parçaları: * Jost ön destek ayağı * Dışta katlanabilir destek ayakları (arka) * Yaklaşık 750 x 350 x 300 mm boyutlarında plastik alet kutusu (sağ tarafta) * Yan çarpma koruması * Plastik çamurluk ----Düşük Yataklı Platform: * Ön panel ve arka eğim önünde, 20" konteynerlerin taşınması için sonradan monte edilebilen konteyner sabitleme mekanizması * Güçlendirilmiş şasi ve güçlendirilmiş akslarla 21 ton toplam ağırlığa sahip tasarım Hsdpfx Anjq Dyu Uefot * Şasi üzerinde sondaj ekipmanı taşımak için güçlendirme paketi * Sıkıştırılmış olarak 50 mm kalınlığında iğne ağacından yapılmış zemin * Ön panel önünde, sonradan monte edilebilen konteyner sabitleme mekanizması * Düz sacdan yapılmış, vidalı ön panel * Çelik sacdan yapılmış, trapez şeklinde profilli, ortada katlanabilir mekanizmaya sahip ikiye ayrılmış yan duvarlar * Çelik arka duvar, rampalar arasında içeri doğru kaydırılabilir – kullanılmadığında iç kısımda ön panelin önünde tutucu * Arka çerçeveler vidalı ----Yük Sabitleme: * Yaklaşık 45 derece bükülmüş, delikli dış çerçeve, her 480 mm'de 2 ton çekme kuvveti * Her 600 mm'de 3 tonluk düşey çekme kancalarının takılması mümkündür * Boyuna eksende ortada bulunan Profifix sabitleme çıtası, LC 3000 daN'a kadar sabitleme imkanı sunar * Ön ve arka köşelerde, her birinde 1 x 10 tonluk sabitleme * Her iki tarafta 2 x 8 tonluk sabitleme halkalarının gömülü olduğu, dış çerçeve, ön ve arka taşıyıcılarda çeşitli delikler bulunan Lasi paketi, 1,2 tonluk sabitleme imkanı sunar ----Rampalar: * Tek parça, mekanik ızgara rampalar, yaklaşık 3.000 x 620 mm boyutlarında, tek kişi tarafından kullanılabilir (20 mm'ye kadar içeri doğru kaydırılabilir) * Arka kısımda, şasiye yaklaşık 860 mm'lik yaklaşma eğimi ----Yükseklikler: * Yüksüz yaklaşık 940 mm * Yüklü yaklaşık 910 mm ----Dingil Mesafesi / Lastikler: * 1.810 mm * Lastikler: 235/75R17.5 ----Boya: * Yan duvarların RAL 9010 saf beyaz renk ile boyanması * Çekme çubuğu, ön panel, arka kapak, katlanabilir destek ayakları ve rampalar sıcak daldırma galvaniz kaplama * Akslar, yaylar, hava tankları ve destek ayağı siyah renkte boyanmıştır ----Bilgiler: * Üretici garantisi ile yeni araç * Hatalar ve ön satış saklıdır ----Teslim Süresi: * Egestorf'tan derhal teslim edilebilir

Durum: yeni gibi (kullanılmış), azami yük ağırlığı: 14.400 kg, toplam ağırlık: 12.080 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, süspansiyon: parabolik yaprak (yay), lastik boyutu: 285/70R19.5, dingil mesafesi: 1.140 mm, römork freni: frenli römork, Üretim yılı: 2022, - ETM-TA 14.4: - Wabco ABS braking system - Emergency release mechanism for spring-loaded cylinders - Drum brakes, 2 x 7 t Gigant axles - Parabolic springs with tandem compensation unit - Height-adjustable drawbar (+/- 150 mm) with 40 mm screwed towing eye - Jost landing gear at the front, lateral underrun protection - Foldable A-panel at the rear Hedpfxexvbcpj Anfet - 15-pin electrical connector, multi-chamber tail lights - Fixed steel front and side walls - Removable steel rear wall - Floor made of 50 mm softwood - 1 sliding plate pad 750 x 1,000 mm in the front area incl. 2 removable skip stops at the front, each adjustable to 2 positions - 4 interchangeable skip stops, adjustable to 2 positions each for lateral centering of the skips - 1 UVV-compliant lashing point per side (13.5 t) for attaching tensioning elements - 2 ratchet tensioners (spindle adjustment) with equalizer chain and quick shortener (tension force 6,300 kg) - Rear crossmember for mounting aluminum loading ramps incl. 2 additional drop-down supports at the rear - Unladen loading edge approx. 710 mm - Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized - Axles, springs, landing gear, air tanks painted black - Tyres: 285/70R19.5 - Wheelbase: 1,140 mm - Unladen loading edge: approx. 710 mm - Hot-dip galvanized finish - Vehicle has day registration from 06/2024, not loaded/used due to missing tire pressure monitoring system - New vehicle with manufacturer's warranty - Subject to errors and prior sale - Immediately available from Egestorf off A7

Durum: ikinci el, azami yük ağırlığı: 8.750 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, toplam genişlik: 2.550 mm, Üretim yılı: 2023, Müller Mitteltal KA-TA-R 11.9 Tandem Three-Way Tipper with Many Extras. Gross weight: 11,900 kg. Standard payload approx.: 8,750 kg. Internal dimensions: 5,000 x 2,420 x 500 mm. Tyres: 385/55R19.5. 4-coat single-colour paint. Wheels: silver. Chassis/underrun protection: hot-dip galvanized. Platform with front wall: hot-dip galvanized. Axles/springs/air tank etc.: black. Side and rear walls: RAL 2011 deep orange. Reinforced and certified body according to EN 12642 XL incl. load securing certificate (only in combination with 500 mm high steel drop sides). Rear stakes bolted, hot-dip galvanized, no top coat. Lashing points LC 5,000 daN recessed at the front. Net hooks integrated laterally and at the rear in the central locking mounts of the base side wall, plus 2 units on the front wall. BPW axles instead of GIANT. Tipping platform with fixed front wall, hot-dip galvanized version, with bolted, galvanized rear stakes, no additional coating (not applicable with HARDOX floor). Due to the system, waviness may occur during hot-dip galvanizing, especially with large floor sheets; complaints regarding this are excluded from warranty coverage. Tyres 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, code 08.940, ramp length 3,570 mm required). 1 plastic toolbox, black, lockable, W=750 x H=350 x D=300 mm (45 kg capacity with even load), location: on right side of chassis frame in driving direction. 1 pair ALU loading ramps without wheel track (8 t/pair), 3,570 x 400 x 105 mm, suitable for rubber-tyred and tracked vehicles, 55 kg/unit. Two-step access in front of the front wall, on left in driving direction (hot-dip galvanized). Connection lines extended for agricultural and forestry tractors. Further information: New: No Hsdszwa Imopfx Anfjt

Durum: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, return-to-ride (RtR) valve, and manual lowering for loading operations ----Drawbar / Flange Drawbar Eye: * Drawbar with positive-locking height adjustment Hedpfevin T Sox Anfst * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED rear lights 12/24 V mounted in underride guard ----General Attachments: * Landing leg at the front * External folding supports at the rear * Plastic toolbox – approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipping Body: * Steel pallet – 3-way tipper body made from high-strength fine-grained steel with high M-Strong sideboards and reinforced 180 bar tipping cylinder * Fixed front wall made from smooth steel sheet * Hardwood board for excavator bucket, bolted to front wall * Continuous side walls – folding, without central stanchion, with sideboard spring lifts and swinging via manual central locking * Screw-on rear stanchions * Combination steel rear swing doors – two asymmetrically split doors, swiveling and lockable up to 270°, non-folding, with additional swing frame for automatic rear door opening during tipping, locking via galvanized rotary bar and central locking system, deactivation function for automatic rear door opening when tipping backwards with open swing doors * 4 mm steel floor * Two-step access on front left * Mounting rail at rear for loading ramps ----Load Securing: * One 7-tonne lashing ring in each corner * Four 3-tonne lashing points recessed per side into the outer frame ----Loading Ramps: * Receiving chamber for loading ramps recessed in chassis at the rear * One pair of aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tyred and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipper body, underrun guard, rear folding supports hot-dip galvanized * Sideboard painting in a RAL colour of choice (except for special or metallic paints), can be changed up to approx. 6 weeks prior to completion * Axles, air tanks, flange drawbar eye, and front landing leg painted in black ----Information: * -- Load securing certificate in accordance with EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Durum: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including Run-on-Release (RtR) valve and manual lowering for loading operations ----Drawbar / Towing Eye: * Drawbar with positive-lock height adjustment * 50 mm flange towing eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12/24 V integrated into underride guard ----General Attachments: * Front support winch * External folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipper Body: * Steel platform – 3-way tipper body made of fine-grained steel with reinforced "M-Strong" high sideboards and reinforced 180 bar tipping cylinder * Fixed front bulkhead made of smooth steel sheet * Hardwood pad for excavator bucket, bolted to the front bulkhead * Continuous side walls – without center stanchion – folding, with sidewall spring assist and swaying function via manual central locking * Rear posts bolted * Combination steel swing rear doors – two-leaf, asymmetrically split, can be swung open 270° and locked in place (not fold-down), with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bar lock and central locking; deactivation function for automatic rear wall opening when tipping backwards with open swing door * 4 mm steel floor plating * Two-step entry on front left side * Mounting rail at rear for loading ramps ----Load Securing: Hjdpfsvin Ucjx Anfet * 1 x 7 t lashing ring in each corner * 4 x 3 t recessed lashing rings on each side in outer frame ----Loading Ramps: * Recessed compartment for ramps at the rear of the chassis * 1 pair of aluminum loading ramps (10 t/pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear posts, front bulkhead, tipper body, underrun protection, folding rear supports hot-dip galvanized * Sideboards painted in a RAL color of choice (no special or metallic paints); can be changed up to approx. 6 weeks prior to completion * Axles, air tanks, flange towing eye, and front support winch painted in black ----Info: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Durum: ikinci el, kilometre: 133.000 km, güç: 78 kW (106,05 bg), ilk tescil: 11/2013, yakıt türü: dizel, boş ağırlık: 2.500 kg, azami yük ağırlığı: 1.000 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 4x2, dingil mesafesi: 3.750 mm, yakıt: dizel, şehir içi yakıt tüketimi: 8,9 l/100 km, yakıt tüketimi (şehir dışı): 7,4 l/100 km, karma yakıt tüketimi: 7,9 l/100 km, renk: sarı, şoför kabini: diğer, vites türü: otomatik, emisyon sınıfı: Euro 5, süspansiyon: diğer, koltuk sayısı: 2, toplam uzunluk: 6.840 mm, yükleme alanı uzunluğu: 4.300 mm, yükleme alanı genişliği: 2.000 mm, yükleme alanı yüksekliği: 2.100 mm, Üretim yılı: 2013, inşaat yüksekliği: 2.850 mm, Donanım: ABS, araç içi bilgisayar, immobilizer sistemi, is filtrasyon filtresi, merkezi kilitleme, Iveco Daily 35 S11 Otomatik – daha fazla konfor, daha iyi görüş, daha yüksek kullanıma hazır olma Günlük iş rutininde pratik ve çok yönlü bir araca ihtiyaç duyanlar, zamanın para olduğunu bilir. İşte bu Iveco Daily 35 S11, otomatik şanzımanı ile bu konuda güçlü yönlerini ortaya koyuyor. Akıllıca tasarlanmış donanımıyla, hemen kullanıma hazır bir çalışma aracı arayan zanaatkarlar, montajcılar, servis teknisyenleri ve esnaflar için ilgi çekici bir çözüm sunuyor. 2.287 cm³ hacmindeki motoru ve 133.000 km'lik yol performansı, ticari amaçlı kullanım için sağlam bir temel oluşturuyor. Özellikle otomatik şanzıman, günlük işleri daha keyifli hale getiriyor. Şehir içi sık sık durup kalkmak, inşaat sahalarında manevra yapmak gibi işlemler daha konforlu ve daha az yorucu hale geliyor; bu, özellikle uzun bir iş gününün ardından takdir edeceğiniz bir avantaj. Ek konfor ve manevra yaparken güvenlik için geri görüş kamerası bulunuyor. Dar girişler, inşaat sahaları veya kalabalık işletme sahaları, bu sayede daha kolay ve güvenli bir şekilde aşılabilir. Mevcut raf sistemi, yükleme alanını aynı zamanda düzenli bir mobil çalışma alanına dönüştürüyor. Aletler, malzemeler ve yedek parçalar düzenli bir şekilde saklanabilir ve hızlıca erişilebilir durumda tutulabilir. Bu, zamandan ve değerli çalışma süresinden tasarruf sağlar. 11/2013'te ilk kez trafiğe çıkan bu Iveco, pratik ihtiyaçlara yönelik olarak tasarlanmış, güvenilir bir ticari araç olarak sunuluyor. Otomatik şanzımanlı, geri görüş kamerası olan ve önceden raf sistemi bulunan fonksiyonel bir araç arayanlar, bu aracı daha yakından incelemelidir. İçeri girin, düzenli bir şekilde başlayın ve verimli bir şekilde çalışın – Iveco Daily 35 S11 bir sonraki görevi için hazır. Hjdpjzw Rh Djfx Anfet Sadece ticari işletmelere (tarım, serbest meslek, küçük ve büyük işletmeler) veya ihracata satış yapılır. Hata ve ön satış saklıdır.

Durum: ikinci el, ilk tescil: 06/2011, toplam genişlik: 25.500 mm,

Durum: ikinci el, kilometre: 86.000 km, güç: 78 kW (106,05 bg), ilk tescil: 07/2013, yakıt türü: dizel, boş ağırlık: 2.550 kg, azami yük ağırlığı: 950 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 4x2, dingil mesafesi: 3.750 mm, bir sonraki muayene (TÜV): 12/2027, yakıt: dizel, şehir içi yakıt tüketimi: 8,9 l/100 km, yakıt tüketimi (şehir dışı): 7,3 l/100 km, karma yakıt tüketimi: 7,9 l/100 km, renk: sarı, şoför kabini: diğer, vites türü: otomatik, emisyon sınıfı: Euro 5, süspansiyon: diğer, koltuk sayısı: 2, toplam uzunluk: 6.840 mm, yükleme alanı uzunluğu: 4.300 mm, yükleme alanı genişliği: 2.000 mm, yükleme alanı yüksekliği: 2.100 mm, Üretim yılı: 2013, inşaat yüksekliği: 2.850 mm, Donanım: ABS, araç içi bilgisayar, immobilizer sistemi, is filtrasyon filtresi, merkezi kilitleme, Iveco Daily 35 S11 Otomatik – Düşük kilometre, yüksek potansiyel Hodpjzw U U Iefx Anfet Günlük kullanım için güvenilir bir araç arayanlar, bu Iveco Daily 35 S11 modelini, otomatik şanzımanı ile yakından incelemelidir. Sadece 86.000 km'lik bir kilometresiyle, bu ticari araç, bir sonraki sahibi için özellikle ilginç bir başlangıç noktası sunmaktadır. Buna ek olarak, pratik bir donanıma ve önceden yapılmış bir raf sistemine sahiptir; bu da günlük iş hayatına hızlı bir başlangıç için ideal koşulları sağlar. 2.287 cm³ hacmindeki motor, özellikle şehir içi sık sürüşlerde, şantiyelerde veya çok sayıda müşteri ziyaretinde avantajlarını gösteren, konforlu bir otomatik şanzımanla birleştirilmiştir. Sürekli vites değiştirme ihtiyacı ortadan kalkar, dur-kalk trafiğinde daha az çaba harcanır ve uzun bir iş gününde daha fazla konfor sağlanır; bu da Daily'yi zanaatkârlar, montajcılar, servis teknisyenleri ve işletme sahipleri için keyifli bir yol arkadaşı yapar. Iveco, manevra yaparken de akıllıca tasarlanmıştır. Geri görüş kamerası, ek bir genel bakış sağlar ve dar şantiyelerde, girişlerde veya işletme sahalarında hassas manevraları kolaylaştırır. Yükleme alanındaki raf sistemi, düzen ve yapı sağlar. Aletler, malzemeler ve yedek parçalar düzenli bir şekilde saklanabilir ve hızlı bir şekilde erişilebilir. Bu sayede, araç pratik bir mobil çalışma alanına dönüşür ve günlük işlerinizde size yardımcı olur. 07/2013'teki ilk kayıt tarihi, bu Daily'yi, yaşı göz önüne alındığında özellikle ilginç olan bir kilometresiyle, kendini kanıtlamış bir ticari araç haline getirir. Nispeten düşük kilometre, otomatik şanzıman, geri görüş kamerası ve önceden yapılmış bir yükleme alanı arayanlar, burada ticari günlük hayatta gerçek bir değer sağlayan bir kombinasyon bulacaktır. Sadece işletme sahiplerine (tarım, serbest meslek, küçük ve büyük işletmeler) veya ihracat amaçlı satış yapılmaktadır. Hata ve ön satış hakkı saklıdır.

Durum: ikinci el, azami yük ağırlığı: 8.900 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 12/2011, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 6.000 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Further information: - Ramps covered with grating - Spring-assisted ramps - Folding support legs - LED reversing lights Hsdpfx Anszb Ua Tsfst - Tailgate springs - BPW axles - Side walls 400 mm - Load length 6,000 mm including rear extension approx. 1,100 mm

Durum: ikinci el, kilometre: 1.100 km, vites türü: diğer, renk: sarı, toplam ağırlık: 32.000 kg, boş ağırlık: 6.210 kg, azami yük ağırlığı: 25.790 kg, lastik boyutu: 425/65R22.5, ilk tescil: 06/2012, süspansiyon: hava, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, air suspension, first axle liftable, ABS (anti-lock braking system), underrun protection. Body: LIEBHERR concrete mixer type HTM 1004, approx. 10 m³, 2 x BPW axles, disc brakes, first axle liftable! ACCESSORY DETAILS WITHOUT GUARANTEE; subject to change, prior sale, and errors excepted! Hedpfji Rk Epex Anfot

Durum: ikinci el, boş ağırlık: 7.300 kg, azami yük ağırlığı: 37.700 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2019, süspansiyon: hava, lastik boyutu: 235/75R17,5 --/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 --/140J, arka lastik boyutu: 235/75R17,5 --/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Reinforced design, high bed length approx. 4,180 mm, low bed length approx. 9,400 mm, loading height approx. 900 mm, 12 stake pockets in the outer frame, 3 cross tie-down rails, 14 lashing rings, 4 pairs of container locks for 2 x 20 ft ISO containers or 1 x 40 ft ISO container, -- Subject to typographical errors, mistakes, and changes, sample images --, More data at: !, More details: ! Hjdpfx Aozw Agfonfst

Durum: ikinci el, makine/araç numarası: GE11/142/2022, boş ağırlık: 6.350 kg, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2008, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.500 mm, süspansiyon: hava, Çok iyi korunmuş, 1. elden araç Üç dingilli alçak şasi geçişli treyler Rampalı alçak şasi treyler Ağır yük taşımacılığı Tip: T3 Kompakt 30,0 Uzunluk: 8500 mm Genişlik: 2500 mm Hava süspansiyonu Ticari/İhracat net fiyatı - 15.990 € Değişiklik, ara satış ve hatalar saklıdır ===== Telefon2 Mobil ===== Hedsn Aw Hkepfx Anfjt

Durum: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black Hjdsxf Skvjpfx Anfet ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Durum: yeni, azami yük ağırlığı: 8.410 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Towing Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear, activated via reverse gear ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted front right on the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead on the left (direction of travel) ----Chassis: * Chassis made from fine-grained steel ----Tipping Body: * Net hooks located at the central locking bearings and 2 on the bulkhead * Steel pallet – 3-way tipper body with reinforced 600 mm Strong sideboards * Continuous upper sidewalls with internal tube reinforcement – without central stanchions – drop-down with sideboard spring assist * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – swivels and locks up to 270°, non-drop-down – with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotating rod lock at the rear and central locking * Deactivation function for automatic tailgate on rear tipping with open wing door * Rear mounting rail for loading ramps ----Load Securing: * Each corner with 1 x 5 t lashing point and 4 x 3 t lashing rings flush-mounted in the external frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles Hodpfx Aexf Skpenfot * Lockable compartment under the loading area, built into the chassis from the rear ----Paintwork: * Chassis, drawbar, tipping body, bulkhead, underrun protection, rear stanchion, rear foldable supports, and access step galvanised * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black ----Info: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf