Kullanılmış Stas 13.50 "Wf 87 Farmstar" satın al (7.016)

Durum: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.500 mm, yükleme alanı hacmi: 87 m³, Chassis Manufactured using self-supporting aluminum construction with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregate chassis made of aluminum, 140 mm frame height (max. 39 t), axles and suspension with disc brakes 22.5”, Jost axle units 3 x 9 tonnes with DC air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle can be lifted separately with start-assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with tyres size 385/65 R 22.5 (manufacturer’s choice) on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel version + approx. 120 kg). Landing gears Aluminum drop leg landing gears, make: Alu-Leg, 2 x 10 t support load, for air suspension we use swivel feet. Brake system According to E.E.C. standard, dual-line brake system, Wabco EBS E-System with RSS (Roll Stability Support), spring-actuated parking brake acting on two axles with control at the rear, aluminum air reservoirs, premium modulator. Electrical system According to StVZO regulations, with two five-chamber lights type Aspöck Europoint III integrated into the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin sockets, with LED side marker lights, 2 work headlights at the rear, 2 LED work headlights at the sides at the height of the landing gears, 1 LED work headlight inside front left operable from outside. Dedpfx Aey U Syrofveuu Body/tipper body — "Body fully welded inside" Bulkhead load 17,250 daN, rear and side walls 10,250 / 13,400 daN, aluminum tipper body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, fully welded with bottom and top chords, plank profiles fully welded inside! Floor as moving floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 7 t/m², closely spaced crossmembers (approx. 350 mm), aluminum bulkhead with 600 mm plank profile, 2-3 mm thick in straight design, special aluminum corner profiles in chamfered design, smooth rear wall in straight design with 2 aluminum swing doors 50/30 mm thick with 4 locking bars, fitted in a welded aluminum rear frame, mounted on Teflon and stainless steel bearings, traveling aluminum wall suspended from reinforced upper aluminum chord with "Kevlar tarp" for complete emptying, lateral brush sealing and additional Kevlar tarp at the sides, integrated discharge funnel with foldable cover plate at the rear left floor edge and operable from outside, inspection window at rear left, one sampling slider per rear door (total 2), service door on left in bulkhead. Hydraulic system "Cargo Floor" 24 board system — smooth version! Moving floor system in the base with hydraulically driven aluminum profiles on aluminum box profiles, fitted with approx. 880 PE-HD slide elements, approx. 8 mm floor thickness, hydraulic system with approx. 200 mm working stroke, fixed halves at bulkhead, separate possibility for connection of hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves to be specified in size and design, operating pressure 190–max. 240 bar, aluminum end pieces welded into the floor, actuation at the rear left with cable remote in a lockable waterproof box, without hydraulic hoses. Accessories PVC fenders with rubber splash guards, aluminum spare wheel holder, foldable aluminum side underrun protection, 1

Durum: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.500 mm, yükleme alanı hacmi: 87 m³, Chassis Manufactured using self-supporting aluminum construction with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregate chassis made of aluminum, 140 mm frame height (max. 39 t), axles and suspension with disc brakes 22.5”, Jost axle units 3 x 9 tonnes with DC air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle can be lifted separately with start-assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with tyres size 385/65 R 22.5 (manufacturer’s choice) on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel version + approx. 120 kg). Landing gears Aluminum drop leg landing gears, make: Alu-Leg, 2 x 10 t support load, for air suspension we use swivel feet. Brake system According to E.E.C. standard, dual-line brake system, Wabco EBS E-System with RSS (Roll Stability Support), spring-actuated parking brake acting on two axles with control at the rear, aluminum air reservoirs, premium modulator. Electrical system According to StVZO regulations, with two five-chamber lights type Aspöck Europoint III integrated into the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin sockets, with LED side marker lights, 2 work headlights at the rear, 2 LED work headlights at the sides at the height of the landing gears, 1 LED work headlight inside front left operable from outside. Body/tipper body — "Body fully welded inside" Bulkhead load 17,250 daN, rear and side walls 10,250 / 13,400 daN, aluminum tipper body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, fully welded with bottom and top chords, plank profiles fully welded inside! Floor as moving floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 7 t/m², closely spaced crossmembers (approx. 350 mm), aluminum bulkhead with 600 mm plank profile, 2-3 mm thick in straight design, special aluminum corner profiles in chamfered design, smooth rear wall in straight design with 2 aluminum swing doors 50/30 mm thick with 4 locking bars, fitted in a welded aluminum rear frame, mounted on Teflon and stainless steel bearings, traveling aluminum wall suspended from reinforced upper aluminum chord with "Kevlar tarp" for complete emptying, lateral brush sealing and additional Kevlar tarp at the sides, integrated discharge funnel with foldable cover plate at the rear left floor edge and operable from outside, inspection window at rear left, one sampling slider per rear door (total 2), service door on left in bulkhead. Hydraulic system "Cargo Floor" 24 board system — smooth version! Moving floor system in the base with hydraulically driven aluminum profiles on aluminum box profiles, fitted with approx. 880 PE-HD slide elements, approx. 8 mm floor thickness, hydraulic system with approx. 200 mm working stroke, fixed halves at bulkhead, separate possibility for connection of hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves to be specified in size and design, operating pressure 190–max. 240 bar, aluminum end pieces welded into the floor, actuation at the rear left with cable remote in a lockable waterproof box, without hydraulic hoses. Accessories PVC fenders with rubber splash guards, aluminum spare wheel holder, foldable aluminum side underrun protection, 1 Dodpfegcw Risx Afveuu

Durum: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.636 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.300 mm, yükleme alanı hacmi: 60 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for especially high stability and strength. Aggregated chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc brakes 22.5" Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment), 1st and 3rd axle separately liftable with starting aid (without tractor equipment), 3rd axle also with Optiturn, ECAS air suspension, Wabco TrailerPulse tire pressure monitoring with ZF wheel-mounted sensors. Tyres and Wheels 6 wheels with 385/65 R 22.5 tires according to manufacturer’s choice, Alcoa aluminum rims Dura-Bright, 11.75x22.5 ET 120, kingpin screwed into a 10 mm thick plate. Landing Gear Aluminum drop supports, 2 x 10 ton support load, pivoting feet used for air suspension. Brake System According to E.G. standard, dual-line braking system, EBS E-system Wabco with RSS (Roll Stability Support), spring-loaded brake system acting on two axles with control at the rear, aluminum air tank system, premium modulator. Electrical System According to STVZO guidelines with 2 LED five-chamber lights, Aspöck Europoint LED type, integrated in the aluminum rear, 24-volt system with 1 x 5-pin and 2 x 7-pin sockets, with side marker lights in LED version, 2 separate LED work lights at the rear, 2 LED work lights at the height of the first landing gear, 1 LED work light inside front left, operable from outside. Body/Tipper “Fully welded interior construction” Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN; aluminum tipper body, 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper flange, plank profiles fully welded on the inside. Floor designed as a moving floor system on 140 mm ALU crossbeams, floor load approx. 7 t/m², crossbeams closely spaced (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in straight execution, special ALU corner profiles beveled, smooth rear wall in straight execution with two ALU swing doors 50/30 mm thick with 4 rotary bolt locks, welded in ALU rear frame, mounted in Teflon and stainless steel bearings. Movable ALU wall suspended in reinforced upper flange with "Kevlar tarpaulin for complete emptying," side brush seal, and additional kevlar side tarpaulin. Integrated discharge funnel with folding cover plate at the floor closure, operable from outside at the left rear. Viewing window rear left, 1 sampling slider each in the rear doors (total 2), service door front left. Hydraulic System "Cargo Floor moving floor system in the floor with hydraulically operated ALU profiles on aluminum square profiles with approx. 670 PE-HD sliders supported, floor thickness approx. 6 mm. Hydraulics with approx. 200 mm stroke, fixed portions at front wall, separate connection option for hydraulic line beneath vehicle with fixed halves, line size NW 21, fixed halves of to-be-specified size and design. Operating pressure 190, max 240 bar. Aluminum end pieces welded into the floor. Electric operation at rear left, with cable operation in a lockable, waterproof box. Duedpfxsy Uqgdj Afvsu Accessories PVC mudguards with rubber mud flaps, ALU spare wheel holder, foldable ALU underrun protection, one plastic tool box approx. 800x460x430 mm, approx. 3.7 m aluminum ladder, roll tarp 680 g/m² quality with roll ta

Durum: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.636 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.300 mm, yükleme alanı hacmi: 60 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for especially high stability and strength. Aggregated chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc brakes 22.5" Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment), 1st and 3rd axle separately liftable with starting aid (without tractor equipment), 3rd axle also with Optiturn, ECAS air suspension, Wabco TrailerPulse tire pressure monitoring with ZF wheel-mounted sensors. Tyres and Wheels Dsdpfx Ajfakkcefvouu 6 wheels with 385/65 R 22.5 tires according to manufacturer’s choice, Alcoa aluminum rims Dura-Bright, 11.75x22.5 ET 120, kingpin screwed into a 10 mm thick plate. Landing Gear Aluminum drop supports, 2 x 10 ton support load, pivoting feet used for air suspension. Brake System According to E.G. standard, dual-line braking system, EBS E-system Wabco with RSS (Roll Stability Support), spring-loaded brake system acting on two axles with control at the rear, aluminum air tank system, premium modulator. Electrical System According to STVZO guidelines with 2 LED five-chamber lights, Aspöck Europoint LED type, integrated in the aluminum rear, 24-volt system with 1 x 5-pin and 2 x 7-pin sockets, with side marker lights in LED version, 2 separate LED work lights at the rear, 2 LED work lights at the height of the first landing gear, 1 LED work light inside front left, operable from outside. Body/Tipper “Fully welded interior construction” Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN; aluminum tipper body, 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper flange, plank profiles fully welded on the inside. Floor designed as a moving floor system on 140 mm ALU crossbeams, floor load approx. 7 t/m², crossbeams closely spaced (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in straight execution, special ALU corner profiles beveled, smooth rear wall in straight execution with two ALU swing doors 50/30 mm thick with 4 rotary bolt locks, welded in ALU rear frame, mounted in Teflon and stainless steel bearings. Movable ALU wall suspended in reinforced upper flange with "Kevlar tarpaulin for complete emptying," side brush seal, and additional kevlar side tarpaulin. Integrated discharge funnel with folding cover plate at the floor closure, operable from outside at the left rear. Viewing window rear left, 1 sampling slider each in the rear doors (total 2), service door front left. Hydraulic System "Cargo Floor moving floor system in the floor with hydraulically operated ALU profiles on aluminum square profiles with approx. 670 PE-HD sliders supported, floor thickness approx. 6 mm. Hydraulics with approx. 200 mm stroke, fixed portions at front wall, separate connection option for hydraulic line beneath vehicle with fixed halves, line size NW 21, fixed halves of to-be-specified size and design. Operating pressure 190, max 240 bar. Aluminum end pieces welded into the floor. Electric operation at rear left, with cable operation in a lockable, waterproof box. Accessories PVC mudguards with rubber mud flaps, ALU spare wheel holder, foldable ALU underrun protection, one plastic tool box approx. 800x460x430 mm, approx. 3.7 m aluminum ladder, roll tarp 680 g/m² quality with roll ta

Durum: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.613 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 2.300 mm, yükleme alanı hacmi: 604 m³, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Equipment: * Chassis type: walking floor * Fifth wheel load (national, t): 12 * Coupling height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Wheelbase (WB) walking floor trailer (mm): 6250 * Internal height front (mm) (IHF): 2300 * Internal height rear (mm) (IHB): 2300 * Loading length (mm): 10613 * Neck height (mm): 240 * Overall width (mm): 2550 * Volume (m³): 60.4145 * Overall length (mm): 11420 * Axles: JOST * Brake version: disc brakes * Brake type: JOST - DCA-T7 (Knorr brake) * Offset (ET): 120 * Option: 1st axle with lifting axle and traction aid * Traction aid activation via switch in the truck * Option: 3rd axle with lifting axle and Optiturn, additional lift axle control activation via Wabco SmartBoard * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * ECAS air suspension with raise and lower valve * Lowering of air suspension via SmartBoard, as well as raise/lower valve * Control console for EBS operation on driver's left, in front of axles * Standard SmartBoard * Central air and electrical console with gantry * Support legs: aluminium quick-drop supports * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco OptiTire * Rims: Alcoa Dura Bright * TPMS sensor type: rim-mounted sensor * TPMS sensor supplier: ZF * Chrome wheel nut caps with STAS logo * Lighting type: ECOLED III - with STAS logo * Reversing lights: 2 units * 2 LED reversing lights rear left and right (in direction of travel), mounted behind the axles * 2 LED reversing lights front left and right (in direction of travel), mounted near the support legs * 1 unit inside, on the front wall, left side (in direction of travel) * Lighting unit protection: one-piece splash guard * LEDs in tailgate crossmember: 2 x 3-function LED * Underrun protection * Mud flaps underrun protection, black with STAS logo * Control console position: walking floor operation left, behind the axles * Hydraulic coupling: rotary coupling * Hydraulic coupling size: 3/4 * Hydraulic coupling type: female * Hydraulic return coupling: rotary coupling * Hydraulic return coupling size: 1 * Hydraulic return coupling gender: female * Hydraulic hose length: 3,000 mm * Hydraulic connection point: front wall * Hydraulic coupling specification: standard * Hydraulic positioning: pressure left, return right (CON) * Toolbox: plastic Duedpfxoy I Hr No Afvju * Air connection in toolbox * Aluminium access ladder, 2.5 m extendable * Broom and shovel holders * Two plastic wheel chocks * Front wall angle (°): 90 * Rear wall angle (°): 90 * Service door on driver's side (left) * Side wall profile: 3 mm - 2 mm * Walking floor system brand: Cargo Floor * Floor system operation: remote control * Walking Floor System CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Floor profile type: 11 mm smooth overlapping, aluminium terminal plate in walking floor * Oil temperature sensor for walking floor system * Clean-out wall: aluminium with brushes * Clean-out wall storage: 6 wheels with bidirectional cleaning (Cargo Floor) * Rear door * Rear wall type: swing doors * Rear wall material: aluminium * Bumper: aluminium rear door bumpers * Number and position of roof bows: 2 middle bows (centrally, evenly distributed) and 1 rear bow (rear) * Curtain holders, straight type, 4 units right side wall * Catwalk/ladder * Catwalk on the front wall * Folding sign "A-Schild" * Fixed aluminium cover plate between floor and front wall

Durum: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.613 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 2.300 mm, yükleme alanı hacmi: 604 m³, toplam genişlik: 2.550 mm, Donanım: ABS, Equipment: * Chassis type: moving floor trailer * King pin load (t), national: 12 * Saddle height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Wheelbase (WB) moving floor trailer (mm): 6250 * Internal height front (mm) (IHF): 2300 * Internal height rear (mm) (IHB): 2300 * Loading length (mm): 10613 * Neck height (mm): 240 * Total width (mm): 2550 * Volume (m³): 60.4145 * Total length (mm): 11420 * Axles: JOST * Brake version: disc brake * Brake type: JOST - DCA-T7 (Knorr-Bremse) * Offset (ET): 120 * 1st axle option: lift axle with traction aid * Activation of traction aid via switch in the truck * 3rd axle option: lift axle and Optiturn, activation of additional lift axle control via Wabco SmartBoard * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * Air suspension ECAS with lifting and lowering valve * Air suspension lowering via SmartBoard, as well as with lift/lower valve * Control console: EBS control on left side in direction of travel, in front of the axles * Standard SmartBoard * Central air and electrical console with support bracket * Landing gear: aluminium drop-leg supports * Tire size: 385/65R22.5 * Tire pressure monitoring: Wabco OptiTire * Rims: Alcoa Dura Bright * TPMS sensor type: rim-mounted sensor * TPMS sensor supplier: ZF * Wheel nut covers: chrome with STAS logo * Lighting type: ECOLED III with STAS logo * Reversing lights: 2 pieces * 2 LED rear reversing lights mounted left and right behind the axles * 2 LED front reversing lights mounted left and right in the area of the landing gear * 1 interior light on the front wall, left in direction of travel * Lighting unit protection: one-piece splash guard * LEDs in rear door cross member: 2 x 3-function LED * Underrun protection * Mud flaps for underrun protection, black with STAS logo * Position of moving floor control console: left, behind axles * Hydraulic coupling: rotary coupling * Hydraulic coupling - size: 3/4" * Hydraulic coupling - gender: female * Hydraulic return line coupling: rotary coupling * Hydraulic return line - size: 1" * Hydraulic return line - gender: female * Hydraulic coupling hose length: 3,000 mm * Hydraulic coupling - connection point on front wall * Hydraulic coupling - standard version * Hydraulic line positioning: pressure left, return right (CON) * Toolbox: plastic * Air connection in toolbox * Aluminium access ladder, extendable to 2.5 m * Broom and shovel holder * Two plastic wheel chocks * Front wall angle (°): 90 * Rear wall angle (°): 90 * Service door: left side, in direction of travel * Side wall profile: 3 mm - 2 mm Dusdpjy I Hr Aofx Afvou * Moving floor system brand: Cargo Floor * Floor system operation: radio remote control * Moving floor system: CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Floor profile type: 11 mm, smooth, overlapping, finishing strip, aluminium moving floor * Oil temperature sensor for moving floor system * Emptying wall: aluminium with brushes * Storage of emptying wall: 6 wheels with bidirectional cleaning (Cargo Floor) * Rear door * Rear wall type: swing doors * Rear wall: aluminium * Rear door protection: aluminium rear door buffer * Cross bar quantity and position: 2 middle bars (centrally, evenly distributed), 1 rear bar (at the back) * Tarpaulin holder: straight design, 4 pieces on right side wall * Catwalk/ladder * Catwalk on front wall * A-board, foldable

Durum: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 93 m³, Chassis Version with reinforced continuous frame, newly manufactured superstructure in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high in reinforced design (for high ground load capacity), additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to the support assembly (trailer construction max. 39,000 kg). Axles and Suspension "Disc brake 22.5" Jost (DCA) axle assemblies, 3x9 tonnes with DCA air suspension, raise and lower function, Wabco Smartboard infotainment center, electronic brake lining wear indicator (BVA) readable in the tractor unit (display), first axle with start-up aid (new EU regulation, without tractor unit equipment) (optional: 1st and 3rd axle liftable). Tyres and Wheels 6 wheels fitted with tyres size 385/65 R 22.5 of manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Landing Legs Mechanical landing gears with two speeds, 2x 20 tonnes load capacity with swivel foot. Brake System In accordance with EU standard; EBS electronic system Wabco with RSS (Roll-Stability-Support) and premium modulator, spring-loaded parking brake system operating on two axles with controls at the rear, ALU air reservoir system. Electrical System According to the guidelines of EU standard 91/633 and 97/28, with 2 five-chamber lamps type Aspöck Europoint 3 integrated into the aluminium rear cover, 24 Volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the underrun protection. Superstructure / Tipper Body "Body fully welded inside" Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower chord, plank profiles fully welded inside, floor as moving floor system mounted on 140 mm ALU crossmembers, forklift floor load approx. 9 t/m², crossmembers closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in chamfered design, smooth rear wall in straight design with 2 ALU swing doors 50/30 mm thick, with 2 locking bars locked in a welded ALU rear frame, mounted with Teflon and Inox bearings, doors secured when open with one chain each side, reinforced wear plates on the side walls approx. 2,000x1,500x4 mm, fully welded, moving residue discharge wall with Kevlar tarp approx. 1,800 mm long plus side Kevlar tarp seals, service door in front wall with ladder folding inward. Hydraulic System "Cargo Floor" Moving Floor System Moving floor system in floor with hydraulically operated ALU profiles on ALU box section profiles with approx. 880 PE-HD sliding blocks plus anti-lifting sliding bearings, Type CF 10 mm floor version, hydraulic stroke approx. 200 mm working travel, fixed ends on front wall, separate option for connecting hydraulic lines under the vehicle with fixed couplings, line size NW 21, fixed couplings with size and type to be specified, operating pressure 190–max. 240 bar, ALU end pieces welded in moving floor, electronic controls rear left with radio control integrated in lockable waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps, Dusdpjyh S Aisfx Afveu

Durum: yeni, azami yük ağırlığı: 28.320 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.750 mm, yükleme alanı hacmi: 92 m³, Donanım: ABS, Chassis: Constructed with a continuous frame, newly manufactured in a self-supporting aluminum (ALU) design featuring appropriate reinforcements in the lower flange for exceptional stability and strength. Crossmembers are 140mm high and reinforced (for high floor load capacity). Additional reinforcement via gusset plate in the front lower flange/vehicle frame area. Chassis from galvanized steel up to the support structure. Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton with DCA air suspension, lifting and lowering functions, Wabco Smartboard info center, electronic brake wear indicator BVA readable in the tractor unit (display). First axle with traction assist (new EC regulation, without tractor unit installation). Optionally, first and third axles liftable as per MP request. Tyres and Wheels: 6 wheels with tires, size 385/65 R 22.5 as per manufacturer's choice (Br-Go-Co), on silver steel rims, size 11.75x22.5 ET 120. King Pin: 2" bolted into a 10mm thick plate. Landing Legs: Mechanical landing gears with two speeds, 2x 20-ton support load, swing foot. Brake System: According to E.C. norms, EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles, controlled from the rear, ALU air reservoir system. Electrical System: According to EC Norm 91/633 and 97/28 with two five-chamber rear lamps, Aspöck Europoint type, integrated in ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets. LED side marker lights, two reflective plates at the rear, front position lights (2x white), rear position lights (2x red), two separate halogen reversing lights integrated in underrun protection. Superstructure/Body: Interior fully welded. Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls of 30mm thick ALU plank profiles (2-3mm), 600mm wide, fully welded with upper and lower flange. Plank profiles fully welded inside. Floor with moving floor system laid on 140mm ALU crossmembers, forklift load approx. 9 t/m2. Crossmembers at approx. 350mm spacing for dense mounting. Special ALU corner profiles in chiseled design. Smooth rear wall, straight design, with two ALU swing doors, 50/30mm thick, with two rod locks mounted in a welded-in ALU rear frame with Teflon and stainless-steel bearings. Doors secured in opened position with lateral chains. Hard wear plates on side walls (approx. 2000x1500x4mm), fully welded. Mobile residual discharge wall with Kevlar tarpaulin, approx. 1800mm long plus lateral brushes with Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System: Moving floor system in the floor with hydraulically operated ALU profiles on ALU square profiles with approx. 880 PE-HD sliding elements and additional anti-lifting slide bearings, Type CF 10mm floor version. Hydraulic stroke approx. 200mm. Fixed ends at the front wall. Separate hydraulic connection possibility under the vehicle with fixed halves, pipe size NW 21. Fixing half with size and design to be specified. Operating pressure 190-max. 240 Bar. ALU end sections welded into the moving floor. Electric control rear left with remote integrated in lockable watertight box. Without hydraulic hoses. Dedpjfi Nmwsfx Afveuu Accessories: 6 PVC mudguards with 2 anti-spray flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, foldable side ALU underrun protection, one toolbox approx. 860x460x400

Durum: yeni, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.750 mm, yükleme alanı hacmi: 92 m³, Donanım: ABS, - Panama floor 900g - 10 mm floor thickness - V-sheets 2000x1500x4 - Service door on the front wall - 12 pairs of lashing rings in the front wall Chassis: Reinforced continuous chassis, new superstructure manufactured in self-supporting design with appropriate reinforcements in the lower chord for particularly high stability and strength, 140 mm high cross members in reinforced design Axle and suspension Disc brakes 22.5, Jost axle assemblies, 3 x 9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA), first axle with traction help (without tractor unit equipment) Tyres and wheels 6 wheels with 385/65 R 22.5 premium tyres (manufacturer optional) mounted on steel rims, 11.75x22.5, ET 120 Landing legs Mechanical landing gears, 2 x 20 t support load Brake system EBS E-System by Wabco with RSS system (Roll Stability Support) and premium modulator, spring-loaded brake system acting on two axles, operated from the rear Electrical system According to EC directives 91/633 and 97/28, with 2 Aspöck Europoint five-chamber lamps integrated in the aluminium rear end, 24V system with 1 x 15-pin and 2 x 7-pin sockets, LED side marker lights, 2 separate LED reversing lights integrated in the underrun protection Superstructure / Tipper body Superstructure fully welded inside, reinforced side walls. Aluminium tipper body, side walls made of 30 mm strong aluminium plank profiles (2-3 mm wall thickness), 600 mm wide, fully welded with lower and upper chord, plank profiles fully welded on the inside. Aluminium front wall with 600 mm plank profile, 2-3 mm wall thickness, straight design, with 2 aluminium swing doors 50/30 mm thick, with sliding residual discharge wall with Kevlar cover approx. 1,500 mm length, plus side Kevlar curtain seal Duedpfxsfi Nmps Afveu Hydraulic system: 'Cargo Floor' moving floor system Moving floor system in the body floor with hydraulically actuated aluminium profiles, mounted on aluminium square profiles with approx. 880 PE-HD sliding elements, CF type 8 mm floor design, fixed sections at the front wall, separate hydraulic line connection under the vehicle with fixed sections, operating pressure 190 - max. 240 bar, aluminium end pieces welded in the moving floor, without hydraulic hoses Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 1 aluminium spare wheel holder, side aluminium underrun protection in foldable design, 1 plastic toolbox approx. 860x460x400 mm, 3.7 m aluminium ladder, tarpaulin approx. 660g/m^2 with tarpaulin system incl. rolling slat, optional with side tension belts or quick release, catwalk on front wall with access ladder, 3 steel hoops with swing-out and lockable fastener, aluminium protective cover with foldable hinges for lighting, etc. +590€ delivery cost Unladen weight: approx. 7,700 kg Offer and photos non-binding

Durum: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 93 m³, Chassis Version with reinforced continuous frame, newly manufactured superstructure in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high in reinforced design (for high ground load capacity), additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to the support assembly (trailer construction max. 39,000 kg). Axles and Suspension "Disc brake 22.5" Duodpfx Asgcw Rmefvju Jost (DCA) axle assemblies, 3x9 tonnes with DCA air suspension, raise and lower function, Wabco Smartboard infotainment center, electronic brake lining wear indicator (BVA) readable in the tractor unit (display), first axle with start-up aid (new EU regulation, without tractor unit equipment) (optional: 1st and 3rd axle liftable). Tyres and Wheels 6 wheels fitted with tyres size 385/65 R 22.5 of manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Landing Legs Mechanical landing gears with two speeds, 2x 20 tonnes load capacity with swivel foot. Brake System In accordance with EU standard; EBS electronic system Wabco with RSS (Roll-Stability-Support) and premium modulator, spring-loaded parking brake system operating on two axles with controls at the rear, ALU air reservoir system. Electrical System According to the guidelines of EU standard 91/633 and 97/28, with 2 five-chamber lamps type Aspöck Europoint 3 integrated into the aluminium rear cover, 24 Volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the underrun protection. Superstructure / Tipper Body "Body fully welded inside" Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower chord, plank profiles fully welded inside, floor as moving floor system mounted on 140 mm ALU crossmembers, forklift floor load approx. 9 t/m², crossmembers closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in chamfered design, smooth rear wall in straight design with 2 ALU swing doors 50/30 mm thick, with 2 locking bars locked in a welded ALU rear frame, mounted with Teflon and Inox bearings, doors secured when open with one chain each side, reinforced wear plates on the side walls approx. 2,000x1,500x4 mm, fully welded, moving residue discharge wall with Kevlar tarp approx. 1,800 mm long plus side Kevlar tarp seals, service door in front wall with ladder folding inward. Hydraulic System "Cargo Floor" Moving Floor System Moving floor system in floor with hydraulically operated ALU profiles on ALU box section profiles with approx. 880 PE-HD sliding blocks plus anti-lifting sliding bearings, Type CF 10 mm floor version, hydraulic stroke approx. 200 mm working travel, fixed ends on front wall, separate option for connecting hydraulic lines under the vehicle with fixed couplings, line size NW 21, fixed couplings with size and type to be specified, operating pressure 190–max. 240 bar, ALU end pieces welded in moving floor, electronic controls rear left with radio control integrated in lockable waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps,

Durum: yeni, kilometre: 60 km, güç: 87 kW (118,29 bg), yakıt türü: elektrikli, dingil konfigürasyonu: 4x2, dingil mesafesi: 4.220 mm, yakıt: elektrik, renk: beyaz, şoför kabini: gündüz kabini, vites türü: otomatik, toplam uzunluk: 6.450 mm, toplam genişlik: 2.100 mm, toplam yükseklik: 2.310 mm, izin verilen dingil yükü (dingil 1): 1.850 kg, izin verilen dingil yükü (dingil 2): 2.100 kg, Üretim yılı: 2026, Donanım: ABS, EBS (Elektronik Fren Sistemi), elektrikli ayna, elektrikli cam sistemi, hidrolik arka platform, hidrolik direksiyon, hız sabitleyici, klima, merkezi kilitleme, = Ekstra Seçenekler ve Donanım = - Isıtmalı dış aynalar - Yolcu koltuk bankı - Sürücü hava yastığı - Uzaktan kumandalı merkezi kilit - Hız sabitleyici - Yüksekliği ayarlanabilir sürücü koltuğu - Yüksekliği ayarlanabilir direksiyon - Klima - LED gündüz farları - Ön orta kol dayama - Radyo DAB MP3 Bluetooth 4.0 - Geri görüş kamerası - Yan kapı - Marş engelleyici - Ön cam ısıtması - Bölme duvarı = Diğer Bilgiler = Genel Bilgi Kapı sayısı: 2 Üretim yılı: 2026 Kabin: tek Aks Konfigürasyonu Ön aks: Maks. aks yükü: 1850 kg; Yönlendirmeli Maksimum arka aks yükü: 2100 kg Ağırlıklar Azami toplam ağırlık: 3.500 kg Fonksiyonel Yükleme platformu: D'HOLLANDIA DH-LMA.08, arka kapak, 750 kg kaldırma kapasitesi Dujdpfx Afjwzizysvou Durum Genel durum: çok iyi Teknik durum: çok iyi Görsel durum: çok iyi

Durum: ikinci el, boş ağırlık: 7.590 kg, azami yük ağırlığı: 28.410 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2021, yükleme alanı hacmi: 92 m³, süspansiyon: hava, lastik boyutu: 385/65 R22,5, Donanım: ABS, | STAS Moving Floor Trailer | Model S300ZX, grain hopper, remote control | 7mm floor, extreme Durabright finish | Toolbox with air hose, 2 lifting axles | Air suspension, spare wheel holder | Unladen weight: 7,590 kg, payload: 28,410 kg | Tyres: 385/65 R22.5 | Jost axles with disc brakes Seller: Christopher Glock German/English Mobile: (Whatsapp) Email: christopher. Full stock available at: Hofgasse 25, A-4063 Hörsching | Errors, omissions, and prior sale reserved. | Sale to trade customers only. Dujdpfxowqqy As Afvou

Durum: ikinci el, azami yük ağırlığı: 34.725 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2024, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 8.912 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.285 mm, yükleme alanı hacmi: 50 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.672 mm, Üretim yılı: 2024, Donanım: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm 'X-Shape' First registration: 10/2024 Mileage: 47,509 km Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (conical design in width) Unladen weight only 7,275 kg Z-chassis, cranked version Continuous floor in 5 mm Hardox steel HB450 Front wall and side walls in 4/3 mm Hardox steel HB450 Sloped front wall, inside with access steps 2-wing portal doors, pneumatic unlocking 1 GRAIN SLIDE in right door leaf Reinforced roof roll tarp, CENTRAL LOCKING HYVA tipping cylinder, Alpha type, suitable for high- and low-pressure Full-load ALU landing legs Dujdsyy Hakopfx Afvsu 2x air vibrators mounted underneath the body SAF axles with large disc brakes, 430 mm 1st axle is a LIFT AXLE with starting aid WABCO Trailer-EBS with RSS roll stability control WABCO Smartboard Automatic tipping lowering system Lifting and lowering device Tyres: 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Toolbox, right 4x LED reversing lights RENTING is the new BUYING, with us also available as FULL-SERVICE RENTAL immediately

Durum: ikinci el, azami yük ağırlığı: 34.127 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2024, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 10.149 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.285 mm, yükleme alanı hacmi: 55 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.822 mm, Üretim yılı: 2024, Donanım: ABS, STAS 3-axle Hardox steel tipper 55 cbm "X-Shape" First registration 10/2024, condition LIKE NEW Mileage only 16,120 km Internal dimensions (LxWxH): 10,149 x 2,350/2,450 x 2,285 mm (tapered design in width) Unladen weight only 7,827 kg Dusdpfx Afsyl Tgasvou Z-chassis, cranked version Floor made entirely of 5 mm Hardox steel HB450 Front wall and side walls: 4/3 mm Hardox steel HB450 Slanted front wall, interior with access ladder 2-leaf rear portal doors, with pneumatic remote unlocking Reinforced roof tarpaulin, central locking HYVA tipping cylinder type Alpha, suitable for high and low pressure Full-load crank landing legs 2x air vibrators under the body SAF axles with large 430 mm disc brakes 1st axle is a lift axle with starting aid WABCO trailer EBS with RSS anti-skid control system WABCO Smartboard Automatic tipper lowering Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING is the new BUYING – also available immediately from us as a FULL-SERVICE RENTAL.

Durum: ikinci el, azami yük ağırlığı: 33.707 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2025, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 8.912 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.285 mm, yükleme alanı hacmi: 50 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.672 mm, Üretim yılı: 2025, Donanım: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "EXTREME" Rock Tipper First registration 09/2025, condition NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered body in width) Unladen weight: 8,293 kg Z-chassis, cranked design Floor made of continuous 6 mm Hardox steel HB450 4 crusher bars evenly distributed along the entire length of the floor, fully welded Front wall and side walls made of 5 mm Hardox steel HB450 Inclined front wall, with internal access ladder Deflector plates along the full length of side walls (to protect mudguards) Hydraulic rear wall flap (with pendulum function) HYVA tipping cylinder, Alpha type, suitable for high and low pressure ALU landing legs, full load capacity 2x air vibrators mounted under the body SAF axles with large 430 mm disc brakes 1st axle is a lift axle with starting aid WABCO Trailer-EBS with anti-skid RSS WABCO Smartboard Automatic tipping lowering system Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holder Tool box on the right 4x LED reversing lights Dedpsxriu Eefx Afvouu RENTING is the new BUYING – with us also available IMMEDIATELY in FULL-SERVICE RENTAL-----

Durum: ikinci el, azami yük ağırlığı: 34.130 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2024, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 10.149 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.285 mm, yükleme alanı hacmi: 55 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.822 mm, Üretim yılı: 2024, Donanım: ABS, STAS 3-Axle Hardox Steel Tipper 55 cbm "X-Shape" First registration 10/2024, condition like NEW Mileage 62,270 km Internal dimensions (LxWxH): 10,149 x 2,350/2,450 x 2,285 mm (tapered body in width) Unladen weight only 7,820 kg Z-chassis, cranked design Continuous 5 mm Hardox steel HB450 floor Front wall and side walls in 4/3 mm Hardox steel HB450 Sloped front wall, internal access ladder Double-wing rear portal doors, pneumatic remote unlocking Grain chute with dust protection bag Reinforced roll-over tarpaulin HYVA tipping cylinder, Alpha type, suitable for high- and low-pressure Full-load crank landing legs 2x air vibrators underneath the body SAF axles with large disc brakes, 430 mm 1st axle: lift axle with traction aid WABCO Trailer EBS with Roll Stability Support (RSS) WABCO SmartBoard Automatic tipping height reduction Lifting and lowering device Duodeyl Tfvopfx Afvsu Tyres: 385/65 R 22.5 ALCOA Dura-Bright polished aluminium rims Aluminium access ladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING is the new BUYING – we also offer full-service rental, available immediately-----

Durum: ikinci el, azami yük ağırlığı: 34.900 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2021, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 10.000 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.280 mm, yükleme alanı hacmi: 55 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.861 mm, Üretim yılı: 2021, Donanım: ABS, STAS 3 Dingilli HardoX Çelik Damper 55 m³ "AGRAR-LINER" Dujdey Nvrzspfx Afveu İlk Tescil: 04/2021 Kilometre: 203.910 km İç Ölçüler (UxGxY): 10.000 x 2.350/2.450 x 2.280 mm (konik yapı) Boş Ağırlık: Sadece 7.100 kg Z-Şasi, kademeli tip Taban tamamen 3 mm HardoX çelik HB450 Ön duvar ve yan duvarlar 3 mm HardoX çelik HB450 Eğimli ön duvar, içeriden tırmanışlı 1 Kanatlı ALÜMİNYUM Kombi Kapı, sallanır tipte, pnömatik son kilit açma 1 Adet TAHIL SÜRGÜSÜ Güçlendirilmiş tavan brandası HYVA tip Alpha kaldırma silindiri, yüksek ve düşük basınca uygun ALÜMINYUM tam yükleme altlığı Kasa altında 2x hava vibratörü SAF akslar, büyük disk frenler, 430 mm 1. Aks kaldırılabilir aks WABCO Trailer-EBS, kayma önleyici RSS WABCO Smartboard Kaldırma ve indirme mekanizması Lastikler 385/65 R 22.5 Alüminyum erişim merdiveni Kürek ve süpürge tutucu Sağda alet kutusu 4x LED geri vites farı KİRALAMA yeni SATIN ALMA - bizde FULL SERVİS KİRALAMA hemen mevcut-----

Durum: ikinci el, azami yük ağırlığı: 35.580 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2021, yükleme alanı uzunluğu: 10.485 mm, yükleme alanı genişliği: 2.474 mm, yükleme alanı yüksekliği: 1.895 mm, yükleme alanı hacmi: 49 m³, Donanım: ABS, STAS S300CX 49 m³ Kullanım 5/2021 Kaldırma aksı ADR: EXII, FL, OX, AT Yükleme alanı: 10.485 x 2.474 x 1.895 mm Dingil mesafesi 1.410 mm Dusdow I Ivzepfx Afvju Akslar 9 ton SAF akslar Kombi kapı Branda Disk frenler Lastikler 385/65 R22,5 Durum: 1. aks 10 mm 2. aks 11 mm 3. aks 12 mm Yedek Boş ağırlık 6.420 kg Toplam ağırlık 42.000 kg YENİ GİBİ! SADECE TARIMSAL ÜRÜNLER İÇİN! Daha fazla bilgi: FB: Dvorak Trucks Czechia KAMYONLAR VE İŞ MAKİNELERİ İÇİN İTHALAT-İHRACAT-SATIŞ-ALIM-KOMİSYONLU SATIŞ KAMYON SERVİSİ LASTİK SERVİSİ KAMYON YIKAMA TAKOGRAF KONTROLÜ

Durum: mükemmel (kullanılmış), boş ağırlık: 7.580 kg, azami yük ağırlığı: 27.000 kg, dingil konfigürasyonu: 3 dingil, izin verilen aks yükü (aks 3): 36.000 kg, yükleme alanı uzunluğu: 13.513 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 2.821 mm, yükleme alanı hacmi: 92 m³, toplam genişlik: 2.475 mm, toplam yükseklik: 3.900 mm, süspansiyon: hava, lastik boyutu: 385/65/ R22,50, lastik durumu: 70 yüzde, dingil mesafesi: 1.310 mm, renk: gümüş, römork freni: frenli römork, Üretim yılı: 2021, Donanım: ABS, Zu verkaufen: Premium STAS Walking-Floor-Sattelauflieger, Baujahre 2019–2021. Die Auflieger wurden ausschließlich im internationalen Fernverkehr eingesetzt, regelmäßig gewartet und sind in einem sehr guten technischen Zustand. Kein Einsatz auf schweren Baustellen. Sofort einsatzbereit – Verkauf erfolgt ausschließlich aufgrund der Modernisierung des Fuhrparks. Spezifikation: - Volumen: 92 m³ - Boden: 7 mm / 10 mm Hardox-Verschleißfestigkeit - JOST-Achsen - Komplett aus Aluminium gefertigt - Farbe: Silber-Metallic - Reifenprofil ca. 70–80 % - Sehr guter optischer und technischer Zustand - Kein Investitionsbedarf - Sofort einsatzfähig Die Auflieger sind nicht abgenutzt, stammten aus einem etablierten internationalen Transportunternehmen. Exportverkauf möglich. Dsdpfsy U Ic Aex Afvjuu

Durum: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 6.600 kg, azami yük ağırlığı: 27.300 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 11.364 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 60 m³, toplam genişlik: 2.470 mm, toplam yükseklik: 3.400 mm, süspansiyon: hava, lastik boyutu: 385/65/ R22,50, lastik durumu: 70 yüzde, dingil mesafesi: 1.310 mm, renk: gümüş, römork freni: frenli römork, Üretim yılı: 2020, Donanım: ABS, DEUTSCHE VERSION — Kippauflieger Zum Verkauf stehen hochwertige STAS Kippauflieger, Baujahre 2019–2021, mit 60 m³ Volumen. Dusdpfx Afsy U H Ahoveu Die Auflieger wurden im internationalen Transport eingesetzt, bei einem Unternehmen genutzt, regelmäßig gewartet und befinden sich in einem sehr guten Zustand. Spezifikation: - 60 m³ Ladevolumen - Aluminiumaufbau - Farbe: Silber Metallic - Getreideschieber - Alufelgen - Reifenprofil ca. 70% - Sofort einsatzbereit - Kein Investitionsbedarf - Hervorragender technischer und optischer Zustand Verkauf ausschließlich im Zusammenhang mit einer Flottenerneuerung.

Durum: ikinci el, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2021, bir sonraki muayene (TÜV): 11/2026, yükleme alanı uzunluğu: 13.530 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.730 mm, yükleme alanı hacmi: 92 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Donanım: ABS, STAS Biostar Kayar Taban +/- 92 m³, 'Cargo-Floor' taban 21 adet 6 mm tahta ile, tam boşaltma (hareketli ön duvar), içeri-dışarı kaydırma fonksiyonu, taban için uzaktan kumanda, arkada çift kanatlı kapı ve döner pimli kilit, kasa önünde çıkış ve platform, branda, ön duvarda servis kapısı, kapıların üzerinde katlanabilir kiriş, ABS, EBS, SAF Intradisk+ dingil(ler), 1. dingil kaldırılabilir dingil, disk fren sistemi, Wabco Smartboard, alçaltma-yükseltme özellikli hava süspansiyonu, destek krikosu, paslanmaz çelik alet kutusu, araç reklam folyosu ve/veya yazılarıyla kaplı olabilir. Djdpfx Afoyzvxxsvsuu SI86735 Teklifimiz genellikle yeni TÜV muayenesi olmadan geçerlidir. Eğer yeni TÜV muayenesi talep edilirse, partner servislerimizin teklifini sunmaktan memnuniyet duyarız! Araç reklam folyosu veya yazısı ile kaplı olabilir. Genel teslimat ve ödeme koşullarımız geçerlidir. Bu ürün için size finansman veya leasing teklifi hazırlamaktan memnuniyet duyarız. Lütfen bizimle iletişime geçin!

Durum: ikinci el, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 12/2022, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı hacmi: 90 m³, Üretim yılı: 2022, Donanım: ABS, Vehicle Identification Number: YE6S300ZXN0000950 German MOT due FRAME ALUMINUM – Aluminum welded construction with additional reinforcement at axle mounts Curb weight: 7,650 kg Volume: approx. 90.0 m³ Djdpfx Ajylfafsfvjuu Dimensions: 13,500 x 2,475 x 2,565 / 2,752 mm Side walls smooth inside and out Side wall profiles approx. 600 mm wide – 30 mm thick – 3 mm inside – 2 mm outside (suitable for grain transport) FLOOR BOARDS – 21 aluminum floor boards – 7 mm smooth – extremely durable with welded aluminum end caps Cramaro Overquick electric tarp system with remote control MERCEDES-BENZ JOST axles with disc brakes 2 x LIFT AXLE Platform Wabco Smart Control Air suspension Crank-adjustable landing legs Tires: 385/65 R 22.5 Spare wheel carrier WITHOUT spare wheel ALUMINUM wheels Subject to changes, prior sale and errors. The description serves only for general vehicle identification and does not constitute a warranty in the legal sense of purchase law. The description according to the purchase agreement is binding. Our offer does not generally include a new technical inspection (TÜV). If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops! Vehicle may have advertising decals and/or lettering. Our general terms of delivery and payment apply.

Durum: ikinci el, azami yük ağırlığı: 32.447 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2023, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 13.110 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 86 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2023, Donanım: ABS, STAS 3-Axle Hardox Steel Tipper 86 m³ First registration 01/2023, one previous owner Mileage 171,700 km Internal dimensions (LxWxH): 13,110 x 2,350/2,450 x 2,770 mm (tapered design) Unladen weight: 9,640 kg Floor made entirely of 5 mm Hardox HB450 steel Front wall and side walls made of 3 mm Hardox HB450 steel Pneumatically folding rear underrun protection Dusdpfxezahuno Afveu Straight front wall, with internal access ladder Rear portal doors 50:50, pneumatic rear unlocking HYVA tipping cylinder, Alpha type, low pressure 2x pneumatic vibrators JOST heavy-duty cranked landing legs SAF axles with large 430 mm disc brakes 1st axle LIFT AXLE WABCO Trailer EBS with rollover stability system (RSS) WABCO Smartboard Lifting and lowering device Automatic tip lowering 6x 385/55 R 22.5 tyres ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Holder for shovel and broom Toolbox on the left 4x LED reversing lights RENTING is the new BUYING – with us, immediately available with full-service rental. -----

Durum: ikinci el, boş ağırlık: 5.580 kg, azami yük ağırlığı: 31.220 kg, toplam ağırlık: 36.800 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2001, bir sonraki muayene (TÜV): 01/2027, yükleme alanı hacmi: 25 m³, toplam uzunluk: 9.730 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, lastik durumu: 20 yüzde, Üretim yılı: 2001, Donanım: ABS, Kampanalı frenler, kaldırılabilir 1. dingil, yönlendirilebilir 3. dingil, alaşım jantlar, 25 metreküp alüminyum damper, arka kapakta mandallı ve ağızlı kilit sistemi, vibratör, elektrikli Marcolin brandası. Dujdpfx Afozcpgqovju

Durum: ikinci el, boş ağırlık: 6.580 kg, azami yük ağırlığı: 29.420 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2001, yükleme alanı hacmi: 45 m³, lastik boyutu: 385/65R22,5, STAS S3-SA336K 3 dingilli damperli kasa, alüminyum jantlar, lastik ölçüsü 385/65 R22.5, kaldırılabilir dingil, tavan brandası, merdivenli platform, portal kapılar, tahıl sürgüsü, uzaktan kumanda. Satış yalnızca ticari alıcılara yapılmaktadır; her türlü garanti hariçtir. Hatalar ve ara satış hakkı saklıdır. Dsdpjy N Tpwsfx Afvjuu