Kullanılmış Stas 50 Cub Cereal satın al (19.106)

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2010, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: diğer, Üretim yılı: 2010, Aks konfigürasyonu Lastik ölçüsü: 385/65 R22.5 Lasdpfx Agoy At Hvj Nea Aks markası: Mercedes-Benz Frenler: Disk frenler Süspansiyon: Havalı süspansiyon Arka aks 1: LM jantlar; Sol lastik dişi: 5 mm; Sağ lastik dişi: 3 mm Arka aks 2: LM jantlar; Sol lastik dişi: 5 mm; Sağ lastik dişi: 5 mm Arka aks 3: LM jantlar; Sol lastik dişi: 2 mm; Sağ lastik dişi: 4 mm Ağırlıklar Boş ağırlık: 6.370 kg Yük kapasitesi: 32.630 kg Azami toplam ağırlık: 39.000 kg Durum Hasar: yok

Durumu: kullanılmış, azami yük ağırlığı: 34.725 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2024, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 8.912 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.285 mm, yükleme alanı hacmi: 50 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.672 mm, Üretim yılı: 2024, Donanım: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm 'X-Shape' First registration: 10/2024 Mileage: 47,509 km Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (conical design in width) Unladen weight only 7,275 kg Z-chassis, cranked version Continuous floor in 5 mm Hardox steel HB450 Front wall and side walls in 4/3 mm Hardox steel HB450 Sloped front wall, inside with access steps 2-wing portal doors, pneumatic unlocking 1 GRAIN SLIDE in right door leaf Reinforced roof roll tarp, CENTRAL LOCKING HYVA tipping cylinder, Alpha type, suitable for high- and low-pressure Full-load ALU landing legs Laodpfxeyy Haks Ag Nsa 2x air vibrators mounted underneath the body SAF axles with large disc brakes, 430 mm 1st axle is a LIFT AXLE with starting aid WABCO Trailer-EBS with RSS roll stability control WABCO Smartboard Automatic tipping lowering system Lifting and lowering device Tyres: 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Toolbox, right 4x LED reversing lights RENTING is the new BUYING, with us also available as FULL-SERVICE RENTAL immediately

Durumu: kullanılmış, azami yük ağırlığı: 34.725 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2024, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 8.912 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.285 mm, yükleme alanı hacmi: 50 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.672 mm, Üretim yılı: 2024, Donanım: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "X-Shape" First registration 10/2024, condition like NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered body shape in width) Unladen weight only 7,275 kg Z-chassis, cranked design Continuous 5 mm Hardox steel HB450 floor Front wall and side walls 4/3 mm Hardox steel HB450 Sloped front wall, interior access ladder 2-wing portal doors, pneumatic remote unlocking 1 GRAIN SLIDE in right-hand door wing Reinforced roof tarpaulin with CENTRAL LOCKING HYVA tipping cylinder, Alpha type, suitable for high and low pressure ALU landing legs, full-load type 2x pneumatic vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE with starting aid WABCO Trailer-EBS with RSS skid control Ledeyxb E Eopfx Ag Noaa WABCO Smartboard Automatic tipping lowering Lifting and lowering mechanism Tyres 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING IS THE NEW BUYING! Now available from us with immediate FULL-SERVICE LEASING.

Durumu: kullanılmış, azami yük ağırlığı: 34.928 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2024, bir sonraki muayene (TÜV): 01/2027, yükleme alanı uzunluğu: 8.912 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.280 mm, yükleme alanı hacmi: 50 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.672 mm, Üretim yılı: 2024, Donanım: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "AGRAR-LINER" First registration: 16.01.2024, condition like NEW Dimensions inside (LxWxH): 8,912 x 2,350/2,450 x 2,280 mm (tapered design) Unladen weight only 7,072 kg Z-chassis, cranked version One-piece floor made of 4 mm Hardox steel HB450 Front wall and side walls made of 3 mm Hardox steel HB450 Slanted front wall, interior with access ladder 2-wing combination doors with swinging function, pneumatic secondary release 2 grain chutes with 1 dust protection bag Reinforced roof tarpaulin HYVA tipping cylinder type Alpha, suitable for high and low pressure Aluminium landing legs, full-load 2x air vibrators mounted beneath the body SAF axles with large disc brakes, 430 mm 1st axle lift axle WABCO trailer EBS with roll stability support (RSS) WABCO Smartboard Lift and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holder Tool box on the right 4x LED reversing lights RENTING is the new BUYING – also available from us immediately with FULL-SERVICE RENTAL----- Laodpfx Aoyv T Sxog Nja

Durumu: kullanılmış, azami yük ağırlığı: 33.707 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2025, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 8.912 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.285 mm, yükleme alanı hacmi: 50 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.672 mm, Üretim yılı: 2025, Donanım: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "EXTREME" Rock Tipper First registration 09/2025, condition NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered body in width) Unladen weight: 8,293 kg Z-chassis, cranked design Floor made of continuous 6 mm Hardox steel HB450 4 crusher bars evenly distributed along the entire length of the floor, fully welded Front wall and side walls made of 5 mm Hardox steel HB450 Inclined front wall, with internal access ladder Deflector plates along the full length of side walls (to protect mudguards) Hydraulic rear wall flap (with pendulum function) HYVA tipping cylinder, Alpha type, suitable for high and low pressure ALU landing legs, full load capacity 2x air vibrators mounted under the body SAF axles with large 430 mm disc brakes 1st axle is a lift axle with starting aid WABCO Trailer-EBS with anti-skid RSS WABCO Smartboard Automatic tipping lowering system Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holder Tool box on the right Lajdsxriu Espfx Ag Noa 4x LED reversing lights RENTING is the new BUYING – with us also available IMMEDIATELY in FULL-SERVICE RENTAL-----

Durumu: kullanılmış, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 12/2022, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı hacmi: 90 m³, Üretim yılı: 2022, Donanım: ABS, Vehicle Identification Number: YE6S300ZXN0000950 German MOT due FRAME ALUMINUM – Aluminum welded construction with additional reinforcement at axle mounts Curb weight: 7,650 kg Volume: approx. 90.0 m³ Dimensions: 13,500 x 2,475 x 2,565 / 2,752 mm Side walls smooth inside and out Side wall profiles approx. 600 mm wide – 30 mm thick – 3 mm inside – 2 mm outside (suitable for grain transport) FLOOR BOARDS – 21 aluminum floor boards – 7 mm smooth – extremely durable with welded aluminum end caps Cramaro Overquick electric tarp system with remote control MERCEDES-BENZ JOST axles with disc brakes 2 x LIFT AXLE Platform Wabco Smart Control Air suspension Crank-adjustable landing legs Tires: 385/65 R 22.5 Spare wheel carrier WITHOUT spare wheel ALUMINUM wheels Laedpfx Agoylfafj Nja Subject to changes, prior sale and errors. The description serves only for general vehicle identification and does not constitute a warranty in the legal sense of purchase law. The description according to the purchase agreement is binding. Our offer does not generally include a new technical inspection (TÜV). If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops! Vehicle may have advertising decals and/or lettering. Our general terms of delivery and payment apply.

Durumu: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2012, yükleme alanı hacmi: 50 m³, toplam uzunluk: 11.490 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/65R22,5, dingil mesafesi: 8.710 mm, renk: yeşil, Üretim yılı: 2012, Donanım: ABS, = Additional Options and Equipment = - Alcoa Dura-Bright wheels - Alloy rims - EBS (Electronic Braking System) - Rear doors - Lift axle - LED lights - LED work lights - Light-alloy rims - Air suspension - Sliding tarpaulin cover - SAF axles - Disc brakes = Notes = Stas S300CX Year of manufacture: 2012 50 m³ BPW axles, disc brakes Tailgate/door combination Aluminum rims Tarpaulin cover ABS/EBS APK (Dutch MOT) valid until 05/2025 = Further Information = Axle configuration Tire size: 385/65R22.5 Axle manufacturer: BPW Brakes: Disc brakes Laodjyxdhispfx Ag Nsa Suspension: Air suspension Rear axle 1: Alloy rims; Max. axle load: 9,000 kg; Tire tread (left): 60%; Tire tread (right): 60% Rear axle 2: Alloy rims; Max. axle load: 9,000 kg; Tire tread (left): 60%; Tire tread (right): 50% Rear axle 3: Alloy rims; Max. axle load: 9,000 kg; Tire tread (left): 60%; Tire tread (right): 50% Weights Unladen weight: 6,570 kg Payload: 32,430 kg Gross vehicle weight: 39,000 kg Functionality Tipping: Rear tipper Condition Technical condition: very good Visual condition: very good Identification Registration: OL-56-RN = Company information = Financing this vehicle? No problem. We can quickly arrange an affordable finance lease agreement for you with a term of 12, 24, 36, 48 or 60 months. You can find all photos and further information on our website or contact us directly.

Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.636 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.300 mm, yükleme alanı hacmi: 60 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for especially high stability and strength. Aggregated chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc brakes 22.5" Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment), 1st and 3rd axle separately liftable with starting aid (without tractor equipment), 3rd axle also with Optiturn, ECAS air suspension, Wabco TrailerPulse tire pressure monitoring with ZF wheel-mounted sensors. Tyres and Wheels 6 wheels with 385/65 R 22.5 tires according to manufacturer’s choice, Alcoa aluminum rims Dura-Bright, 11.75x22.5 ET 120, kingpin screwed into a 10 mm thick plate. Landing Gear Aluminum drop supports, 2 x 10 ton support load, pivoting feet used for air suspension. Brake System According to E.G. standard, dual-line braking system, EBS E-system Wabco with RSS (Roll Stability Support), spring-loaded brake system acting on two axles with control at the rear, aluminum air tank system, premium modulator. Electrical System According to STVZO guidelines with 2 LED five-chamber lights, Aspöck Europoint LED type, integrated in the aluminum rear, 24-volt system with 1 x 5-pin and 2 x 7-pin sockets, with side marker lights in LED version, 2 separate LED work lights at the rear, 2 LED work lights at the height of the first landing gear, 1 LED work light inside front left, operable from outside. Body/Tipper “Fully welded interior construction” Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN; aluminum tipper body, 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper flange, plank profiles fully welded on the inside. Floor designed as a moving floor system on 140 mm ALU crossbeams, floor load approx. 7 t/m², crossbeams closely spaced (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in straight execution, special ALU corner profiles beveled, smooth rear wall in straight execution with two ALU swing doors 50/30 mm thick with 4 rotary bolt locks, welded in ALU rear frame, mounted in Teflon and stainless steel bearings. Movable ALU wall suspended in reinforced upper flange with "Kevlar tarpaulin for complete emptying," side brush seal, and additional kevlar side tarpaulin. Integrated discharge funnel with folding cover plate at the floor closure, operable from outside at the left rear. Viewing window rear left, 1 sampling slider each in the rear doors (total 2), service door front left. Hydraulic System "Cargo Floor moving floor system in the floor with hydraulically operated ALU profiles on aluminum square profiles with approx. 670 PE-HD sliders supported, floor thickness approx. 6 mm. Hydraulics with approx. 200 mm stroke, fixed portions at front wall, separate connection option for hydraulic line beneath vehicle with fixed halves, line size NW 21, fixed halves of to-be-specified size and design. Operating pressure 190, max 240 bar. Aluminum end pieces welded into the floor. Electric operation at rear left, with cable operation in a lockable, waterproof box. Accessories Ljdpfofakkcox Ag Nsaa PVC mudguards with rubber mud flaps, ALU spare wheel holder, foldable ALU underrun protection, one plastic tool box approx. 800x460x430 mm, approx. 3.7 m aluminum ladder, roll tarp 680 g/m² quality with roll ta

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2008, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Two fully automatically welded T-profiles (width 200 mm) Corrosion protection between steel and aluminium parts, continuous rubber strip pressure-bonded to the longitudinal members, maximum stability via integrated tipping shaft with wear-resistant, pressed-in special bushings, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit Axles and Suspension, Disc Brakes Jost-disc axle units 3 x 9 tonnes with DCA air suspension, lift and lower valve, load gauge, 3rd axle automatically liftable Ledexf Spfspfx Ag Noaa Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 50-60% tread on silver steel rims, 11.75x22.5 ET 120 Landing Legs Mechanical support legs, load capacity 2 x 20 t, swing feet used for air suspension Brake System According to E.C. standard, two-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E system 2S/2M, with RSS (Roll Stability Support), ALU air tank Electrical System According to StVZO regulations, with two 5-chamber Aspöck LED tail lights, 24 Volt system with two 7-pin and one 15-pin socket at the front, EBS socket, with LED side marker lights, 2 clearance lights, 2 separate LED reversing lights Tipping Body / Dump Bed ALU dump body, side walls with welded vertical aluminium profiles, floor approx. 6 mm in highly wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall angled design in 4 mm ALU with reinforcing profiles for hydraulic cylinder mounting, side walls in 3 mm hard alloy, straight rear wall, automatic pneumatic (lockable) universal tailgate with pendulum and 2/3-1/3 barn door configuration, double hinge, made from 4 mm thick aluminium, 1 grain chute with water protection, wear plates fitted on side approx. 400-1,000mm x 3,000mm x 4mm Hydraulic System Hydraulic cylinder mounted at the front wall, operating pressure 150 bar, brand Edbro, with approx. 2 m hydraulic hose and 1" quick-release coupling Accessories 6 Parlok plastic mudguards with 2 Stas splash guards, 3 m aluminium ladder, reinforced and foldable underrun protection with 2 towing eyes, one foldable side underrun guard, catwalk on front wall with access ladder (left side), 3 swivelling ALU bows, 1 central additional bow holder, rolling tarp with aluminium tube in centre, rolling tarp system, approx. 660g/m² quality, tarp fastener with quick-action lock (no lashing straps), wheel brace, 2 chocks, toolbox type 800, continuous splash flap on underrun guard, etc. Offer and images are subject to prior sale/change.

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2017, yükleme alanı uzunluğu: 10.550 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.900 mm, yükleme alanı hacmi: 50 m³, Chassis light version Aluminium (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width approx. 1,600 mm Lodpfexf Sn Ijx Ag Neaa Axles and Suspension Disc brakes 430 mm "Off Road Version" SAF Intradisc axle units 3 x 9 t with SAF air suspension, central air bag arrangement next to the chassis longitudinal beams, 1st axle liftable with drive-off aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with trailing steering, electrically lockable, Tyres and Wheels 6 wheels fitted with 385/65 R 22.5 tyres, approx. 40-50 % tread remaining, with Alcoa aluminium rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminium rims Landing Gear Mechanical version with single-side operation, 2 speeds, with swing foot for air suspension, 2x20t static load capacity Braking System According to E.C. standards, twin-line Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E including RSS (Roll-Stability-System), Wabco Smartboard info center, aluminium air reservoir system Electrical System According to StVZO regulations, with 2 five-chamber lamps type Aspöck Ecopoint 2, 24-volt system with 2x7- and 1x15-pin sockets, with lateral outline marker lights, 2 separate LED reversing lights at the rear. All air and electrical lines neatly installed in plastic tubing. Tipping Body/Bin Body, fully welded interior Aluminium bin, side walls made of 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded, floor 8 mm thick high wear-resistant alloy (5383H34/HB 110), bulkhead 4 mm reinforced in straight version, rear wall as double swing doors in straight version with 2 half/half doors each with a grain chute, pneumatic floor vibrators underneath, rear hanger made of aluminium, swing-out, two hold-downs with rubber buffers on the tipper bin attached to the frame at the bulkhead, Hydraulic System Tipping cylinder with "cardan" mounting, 7,630 mm stroke Hydraulic cylinder mounted to the bulkhead, working pressure 220 bar, make Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48° Accessories 6 Parlok mudguards, full-width spray flaps fitted to underrun protection, aluminium spare wheel holder, foldable lateral underrun protection right-hand side, large 860-type toolbox, approx. 3 m aluminium ladder, 3 mid-position, approx. 150 mm raised swing bars, rolling tarp with central light strip and separate reinforcements at wear points, approx. 660 g/m² quality, with rolling tarpaulin system, perimeter rubber cord in rear end of tarp with two tension hooks to fix onto the rear swing bar, catwalk on bin with access on left, side tarp lock with tensioning straps, rear tarp closure with welded-in rubber cord for water resistance, robust foldable aluminium underrun guard with two towing eyes left and right including locking pins, 2 "Clear-Pass" spray flaps on the mudguard to EC standard, etc. Offer and images non-binding.

Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 93 m³, Chassis Version with reinforced continuous frame, newly manufactured superstructure in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high in reinforced design (for high ground load capacity), additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to the support assembly (trailer construction max. 39,000 kg). Axles and Suspension "Disc brake 22.5" Jost (DCA) axle assemblies, 3x9 tonnes with DCA air suspension, raise and lower function, Wabco Smartboard infotainment center, electronic brake lining wear indicator (BVA) readable in the tractor unit (display), first axle with start-up aid (new EU regulation, without tractor unit equipment) (optional: 1st and 3rd axle liftable). Tyres and Wheels 6 wheels fitted with tyres size 385/65 R 22.5 of manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Landing Legs Mechanical landing gears with two speeds, 2x 20 tonnes load capacity with swivel foot. Brake System In accordance with EU standard; EBS electronic system Wabco with RSS (Roll-Stability-Support) and premium modulator, spring-loaded parking brake system operating on two axles with controls at the rear, ALU air reservoir system. Electrical System According to the guidelines of EU standard 91/633 and 97/28, with 2 five-chamber lamps type Aspöck Europoint 3 integrated into the aluminium rear cover, 24 Volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the underrun protection. Laodpfx Aeyh S Aisg Nea Superstructure / Tipper Body "Body fully welded inside" Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower chord, plank profiles fully welded inside, floor as moving floor system mounted on 140 mm ALU crossmembers, forklift floor load approx. 9 t/m², crossmembers closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in chamfered design, smooth rear wall in straight design with 2 ALU swing doors 50/30 mm thick, with 2 locking bars locked in a welded ALU rear frame, mounted with Teflon and Inox bearings, doors secured when open with one chain each side, reinforced wear plates on the side walls approx. 2,000x1,500x4 mm, fully welded, moving residue discharge wall with Kevlar tarp approx. 1,800 mm long plus side Kevlar tarp seals, service door in front wall with ladder folding inward. Hydraulic System "Cargo Floor" Moving Floor System Moving floor system in floor with hydraulically operated ALU profiles on ALU box section profiles with approx. 880 PE-HD sliding blocks plus anti-lifting sliding bearings, Type CF 10 mm floor version, hydraulic stroke approx. 200 mm working travel, fixed ends on front wall, separate option for connecting hydraulic lines under the vehicle with fixed couplings, line size NW 21, fixed couplings with size and type to be specified, operating pressure 190–max. 240 bar, ALU end pieces welded in moving floor, electronic controls rear left with radio control integrated in lockable waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps,

Durumu: yeni, azami yük ağırlığı: 28.320 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.750 mm, yükleme alanı hacmi: 92 m³, Donanım: ABS, Chassis: Constructed with a continuous frame, newly manufactured in a self-supporting aluminum (ALU) design featuring appropriate reinforcements in the lower flange for exceptional stability and strength. Crossmembers are 140mm high and reinforced (for high floor load capacity). Additional reinforcement via gusset plate in the front lower flange/vehicle frame area. Chassis from galvanized steel up to the support structure. Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton with DCA air suspension, lifting and lowering functions, Wabco Smartboard info center, electronic brake wear indicator BVA readable in the tractor unit (display). First axle with traction assist (new EC regulation, without tractor unit installation). Optionally, first and third axles liftable as per MP request. Tyres and Wheels: 6 wheels with tires, size 385/65 R 22.5 as per manufacturer's choice (Br-Go-Co), on silver steel rims, size 11.75x22.5 ET 120. Lasdpofi Nmwofx Ag Nsa King Pin: 2" bolted into a 10mm thick plate. Landing Legs: Mechanical landing gears with two speeds, 2x 20-ton support load, swing foot. Brake System: According to E.C. norms, EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles, controlled from the rear, ALU air reservoir system. Electrical System: According to EC Norm 91/633 and 97/28 with two five-chamber rear lamps, Aspöck Europoint type, integrated in ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets. LED side marker lights, two reflective plates at the rear, front position lights (2x white), rear position lights (2x red), two separate halogen reversing lights integrated in underrun protection. Superstructure/Body: Interior fully welded. Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls of 30mm thick ALU plank profiles (2-3mm), 600mm wide, fully welded with upper and lower flange. Plank profiles fully welded inside. Floor with moving floor system laid on 140mm ALU crossmembers, forklift load approx. 9 t/m2. Crossmembers at approx. 350mm spacing for dense mounting. Special ALU corner profiles in chiseled design. Smooth rear wall, straight design, with two ALU swing doors, 50/30mm thick, with two rod locks mounted in a welded-in ALU rear frame with Teflon and stainless-steel bearings. Doors secured in opened position with lateral chains. Hard wear plates on side walls (approx. 2000x1500x4mm), fully welded. Mobile residual discharge wall with Kevlar tarpaulin, approx. 1800mm long plus lateral brushes with Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System: Moving floor system in the floor with hydraulically operated ALU profiles on ALU square profiles with approx. 880 PE-HD sliding elements and additional anti-lifting slide bearings, Type CF 10mm floor version. Hydraulic stroke approx. 200mm. Fixed ends at the front wall. Separate hydraulic connection possibility under the vehicle with fixed halves, pipe size NW 21. Fixing half with size and design to be specified. Operating pressure 190-max. 240 Bar. ALU end sections welded into the moving floor. Electric control rear left with remote integrated in lockable watertight box. Without hydraulic hoses. Accessories: 6 PVC mudguards with 2 anti-spray flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, foldable side ALU underrun protection, one toolbox approx. 860x460x400

Durumu: yeni, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.750 mm, yükleme alanı hacmi: 92 m³, Donanım: ABS, - Panama floor 900g - 10 mm floor thickness - V-sheets 2000x1500x4 - Service door on the front wall - 12 pairs of lashing rings in the front wall Chassis: Reinforced continuous chassis, new superstructure manufactured in self-supporting design with appropriate reinforcements in the lower chord for particularly high stability and strength, 140 mm high cross members in reinforced design Axle and suspension Disc brakes 22.5, Jost axle assemblies, 3 x 9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA), first axle with traction help (without tractor unit equipment) Tyres and wheels 6 wheels with 385/65 R 22.5 premium tyres (manufacturer optional) mounted on steel rims, 11.75x22.5, ET 120 Landing legs Mechanical landing gears, 2 x 20 t support load Laodpfefi Nmpsx Ag Nja Brake system EBS E-System by Wabco with RSS system (Roll Stability Support) and premium modulator, spring-loaded brake system acting on two axles, operated from the rear Electrical system According to EC directives 91/633 and 97/28, with 2 Aspöck Europoint five-chamber lamps integrated in the aluminium rear end, 24V system with 1 x 15-pin and 2 x 7-pin sockets, LED side marker lights, 2 separate LED reversing lights integrated in the underrun protection Superstructure / Tipper body Superstructure fully welded inside, reinforced side walls. Aluminium tipper body, side walls made of 30 mm strong aluminium plank profiles (2-3 mm wall thickness), 600 mm wide, fully welded with lower and upper chord, plank profiles fully welded on the inside. Aluminium front wall with 600 mm plank profile, 2-3 mm wall thickness, straight design, with 2 aluminium swing doors 50/30 mm thick, with sliding residual discharge wall with Kevlar cover approx. 1,500 mm length, plus side Kevlar curtain seal Hydraulic system: 'Cargo Floor' moving floor system Moving floor system in the body floor with hydraulically actuated aluminium profiles, mounted on aluminium square profiles with approx. 880 PE-HD sliding elements, CF type 8 mm floor design, fixed sections at the front wall, separate hydraulic line connection under the vehicle with fixed sections, operating pressure 190 - max. 240 bar, aluminium end pieces welded in the moving floor, without hydraulic hoses Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 1 aluminium spare wheel holder, side aluminium underrun protection in foldable design, 1 plastic toolbox approx. 860x460x400 mm, 3.7 m aluminium ladder, tarpaulin approx. 660g/m^2 with tarpaulin system incl. rolling slat, optional with side tension belts or quick release, catwalk on front wall with access ladder, 3 steel hoops with swing-out and lockable fastener, aluminium protective cover with foldable hinges for lighting, etc. +590€ delivery cost Unladen weight: approx. 7,700 kg Offer and photos non-binding

Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.500 mm, yükleme alanı hacmi: 87 m³, Chassis Manufactured using self-supporting aluminum construction with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregate chassis made of aluminum, 140 mm frame height (max. 39 t), axles and suspension with disc brakes 22.5”, Jost axle units 3 x 9 tonnes with DC air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle can be lifted separately with start-assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with tyres size 385/65 R 22.5 (manufacturer’s choice) on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel version + approx. 120 kg). Landing gears Aluminum drop leg landing gears, make: Alu-Leg, 2 x 10 t support load, for air suspension we use swivel feet. Brake system According to E.E.C. standard, dual-line brake system, Wabco EBS E-System with RSS (Roll Stability Support), spring-actuated parking brake acting on two axles with control at the rear, aluminum air reservoirs, premium modulator. Electrical system According to StVZO regulations, with two five-chamber lights type Aspöck Europoint III integrated into the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin sockets, with LED side marker lights, 2 work headlights at the rear, 2 LED work headlights at the sides at the height of the landing gears, 1 LED work headlight inside front left operable from outside. Body/tipper body — "Body fully welded inside" Bulkhead load 17,250 daN, rear and side walls 10,250 / 13,400 daN, aluminum tipper body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, fully welded with bottom and top chords, plank profiles fully welded inside! Floor as moving floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 7 t/m², closely spaced crossmembers (approx. 350 mm), aluminum bulkhead with 600 mm plank profile, 2-3 mm thick in straight design, special aluminum corner profiles in chamfered design, smooth rear wall in straight design with 2 aluminum swing doors 50/30 mm thick with 4 locking bars, fitted in a welded aluminum rear frame, mounted on Teflon and stainless steel bearings, traveling aluminum wall suspended from reinforced upper aluminum chord with "Kevlar tarp" for complete emptying, lateral brush sealing and additional Kevlar tarp at the sides, integrated discharge funnel with foldable cover plate at the rear left floor edge and operable from outside, inspection window at rear left, one sampling slider per rear door (total 2), service door on left in bulkhead. Hydraulic system "Cargo Floor" 24 board system — smooth version! Moving floor system in the base with hydraulically driven aluminum profiles on aluminum box profiles, fitted with approx. 880 PE-HD slide elements, approx. 8 mm floor thickness, hydraulic system with approx. 200 mm working stroke, fixed halves at bulkhead, separate possibility for connection of hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves to be specified in size and design, operating pressure 190–max. 240 bar, aluminum end pieces welded into the floor, actuation at the rear left with cable remote in a lockable waterproof box, without hydraulic hoses. Accessories Lasdpjgcw Riefx Ag Noa PVC fenders with rubber splash guards, aluminum spare wheel holder, foldable aluminum side underrun protection, 1

Durumu: iyi (kullanılmış), kilometre: 374.947 km, güç: 368 kW (500,34 bg), ilk tescil: 07/2019, yakıt türü: dizel, lastik boyutu: 385/65R22,5, dingil konfigürasyonu: 4x2, dingil mesafesi: 4.800 mm, yakıt: dizel, renk: yeşil, şoför kabini: yataklı kabin, vites türü: otomatik, vites sayısı: 12, emisyon sınıfı: Euro 6, süspansiyon: çelik-hava, toplam uzunluk: 8.680 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.550 mm, yükleme alanı uzunluğu: 5.830 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.110 mm, Üretim yılı: 2019, Donanım: ABS, Bluetooth, elektrikli ayna, elektrikli cam sistemi, hız sabitleyici, klima, koltuk ısıtıcı, merkezi kilitleme, navigasyon sistemi, park ısıtıcısı, tır çekici bağlantısı, çekiş kontrolü, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Halogen lamp - Hydraulic system - Manual - Power take-off (PTO) - Pump - Radio/cassette - Sleeper cab - Lane departure warning system - Fabric upholstery = Notes = Number of axles: 2, Configuration: 4x2, Kerb weight: 9,445 kg, Gross weight: 19,500 kg, Total tank capacity: 780 liters, Trailer coupling, Steering knuckle pin diameter: 40 DIN, Fifth wheel: Fixed, Number of diff locks: 1, Suspension type: Air suspension, Cab type: Sleeper cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Green, Heated mirrors, Lighting type: Halogen lamp, Lane departure warning system, Climate control, Seat heating, Bluetooth, Flashing lights, Engine power: 368 kW (493 Hp), Fuel: Diesel, Euro: 6, Transmission type: Automatic, Gearbox: ZF, Gears: 12, Power steering, ABS, ASR, Hydraulic system, Power take-off (PTO), PTO type: 1, Starter battery, Number of sides: One side, Pump, Central locking, Seating layout: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual Lajdpsxmrqlofx Ag Nea = Further Information = Transmission Gearbox: ZF, 12 gears, automatic Axle configuration Brakes: Disc brakes Axle 1: Tyre size: 385/65R22.5; Steering; Left tyre tread: 14 mm; Right tyre tread: 12 mm; Suspension: Leaf springs Axle 2: Tyre size: 315/80R22.5; Twin tyres; Left inner tyre tread: 13 mm; Left outer tyre tread: 14 mm; Right inner tyre tread: 11 mm; Right outer tyre tread: 12 mm; Suspension: Air suspension Weights Unladen weight: 9,445 kg Payload: 10,055 kg Gross vehicle weight: 19,500 kg Functionality Loading platform height: 153 cm Pump: Yes Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial Information Leasing price: €677 per month (default, 60 months); Please request further information and terms Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer covers all European brands, year models, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognisable quality • A fair price • Proper business conduct • We speak many languages • We understand our customers • Support for import and transport • (Export) registration quickly organised • Expert technical services • The assurance of "recognisable quality" • And more.... Please visit our website for special offers and the complete inventory: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 93 m³, Chassis Version with reinforced continuous frame, newly manufactured superstructure in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high in reinforced design (for high ground load capacity), additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to the support assembly (trailer construction max. 39,000 kg). Axles and Suspension "Disc brake 22.5" Jost (DCA) axle assemblies, 3x9 tonnes with DCA air suspension, raise and lower function, Wabco Smartboard infotainment center, electronic brake lining wear indicator (BVA) readable in the tractor unit (display), first axle with start-up aid (new EU regulation, without tractor unit equipment) (optional: 1st and 3rd axle liftable). Laedpfxogcw Rms Ag Nja Tyres and Wheels 6 wheels fitted with tyres size 385/65 R 22.5 of manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Landing Legs Mechanical landing gears with two speeds, 2x 20 tonnes load capacity with swivel foot. Brake System In accordance with EU standard; EBS electronic system Wabco with RSS (Roll-Stability-Support) and premium modulator, spring-loaded parking brake system operating on two axles with controls at the rear, ALU air reservoir system. Electrical System According to the guidelines of EU standard 91/633 and 97/28, with 2 five-chamber lamps type Aspöck Europoint 3 integrated into the aluminium rear cover, 24 Volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the underrun protection. Superstructure / Tipper Body "Body fully welded inside" Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower chord, plank profiles fully welded inside, floor as moving floor system mounted on 140 mm ALU crossmembers, forklift floor load approx. 9 t/m², crossmembers closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in chamfered design, smooth rear wall in straight design with 2 ALU swing doors 50/30 mm thick, with 2 locking bars locked in a welded ALU rear frame, mounted with Teflon and Inox bearings, doors secured when open with one chain each side, reinforced wear plates on the side walls approx. 2,000x1,500x4 mm, fully welded, moving residue discharge wall with Kevlar tarp approx. 1,800 mm long plus side Kevlar tarp seals, service door in front wall with ladder folding inward. Hydraulic System "Cargo Floor" Moving Floor System Moving floor system in floor with hydraulically operated ALU profiles on ALU box section profiles with approx. 880 PE-HD sliding blocks plus anti-lifting sliding bearings, Type CF 10 mm floor version, hydraulic stroke approx. 200 mm working travel, fixed ends on front wall, separate option for connecting hydraulic lines under the vehicle with fixed couplings, line size NW 21, fixed couplings with size and type to be specified, operating pressure 190–max. 240 bar, ALU end pieces welded in moving floor, electronic controls rear left with radio control integrated in lockable waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps,

Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, Stas 56 m³, kaldırılabilir dingil, 6.000 kg taşıma kapasitesi, kapılar, devrilebilen arka kapak, 2 sürgü, Alcoa alüminyum jantlar, 2016 üretimi, tescilli, branda iyi durumda, lastikler iyi, akıllı tahta, çok iyi durumda. Detaylar için özelden iletişime geçiniz. Laodpfx Asyzg Uqeg Nea

Durumu: kullanılmış, azami yük ağırlığı: 32.447 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2023, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 13.110 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 86 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2023, Donanım: ABS, STAS 3-axle Hardox steel tipper, 86 m³ First registration: 01/2023, one owner Mileage: 188,744 km Internal dimensions (LxWxH): 13,110 x 2,350/2,450 x 2,770 mm (tapered design) Unladen weight: 9,640 kg Continuous 5 mm Hardox steel HB450 floor Front wall and side walls made of 3 mm Hardox steel HB450 Pneumatically foldable rear underride guard Straight front wall, interior access ladder Rear portal doors 50:50 split, pneumatic remote unlocking Reinforced sliding roof tarpaulin HYVA tipping cylinder, Alpha type, low-pressure 2x pneumatic vibrators JOST full-load crank landing gear SAF axles with large disc brakes, 430 mm 1st axle is a lift axle WABCO trailer EBS with Roll Stability Support (RSS) WABCO Smartboard Lift and lowering device Automatic tipping lowering function 6x 385/55 R 22.5 tyres ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Ljdpjy Dy E Ujfx Ag Nsaa Shovel and broom holder Toolbox on the left 4x LED reversing lights RENTING is the new BUYING – also available immediately with full-service rental!

Durumu: kullanılmış, azami yük ağırlığı: 32.410 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2024, bir sonraki muayene (TÜV): 03/2027, yükleme alanı uzunluğu: 13.110 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 86 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2024, Donanım: ABS, STAS 3-axle Hardox steel tipper, 86 m³ First registration: 02/2024, one owner Mileage: 152,200 km Internal dimensions (LxWxH): 13,110 x 2,350/2,450 x 2,770 mm (conical design) Unladen weight: 9,640 kg Floor completely made of 5 mm Hardox steel HB450 Front wall and side walls made of 3 mm Hardox steel HB450 Pneumatically retractable rear underrun protection Straight front wall, internal access ladder Rear portal doors 50:50 split, pneumatic unlocking Reinforced roll-over tarp HYVA tipping cylinder, type Alpha, low pressure 2x pneumatic vibrators JOST crank landing legs, full load SAF axles with large disc brakes, 430 mm 1st axle is a lift axle WABCO trailer EBS with RSS roll stability support WABCO Smartboard Lift and lowering device Automatic tipping lowering function 6-run 385/55 R 22.5 tires ALCOA Dura-Bright high-gloss aluminium rims Aluminium entry ladder Holder for shovel and broom Toolbox on the left-hand side 4x LED reversing lights Lasdjy Dy Hrjpfx Ag Noa RENTING is the new BUYING – immediately available from us, including full-service rental.

Durumu: kullanılmış, azami yük ağırlığı: 32.590 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2024, bir sonraki muayene (TÜV): 04/2027, yükleme alanı uzunluğu: 9.665 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 52 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.690 mm, Üretim yılı: 2024, Donanım: ABS, STAS 3 Dingilli Alüminyum Damper Dorsesi 52 cbm İlk tescil 04/2024 Kilometre 152.817 km İç ölçüler (UxGxY): 9.665 x 2.475 x 2.165 mm Palet genişliği Boş ağırlık 6.410 kg 8 mm ALÜ ile tamamen kaplanmış taban, 110 Brinell sertlikte Ön duvar 4 mm ALÜ Profil yan duvarlar 3 mm - 2 mm, iç ve dış yüzeyi düz şekilde 2 kanatlı kombi kapı, sallanabilir özellikte, pnömatik son kilitleme 2 adet TAHIL SÜRÜCÜSÜ, 1x toz koruma torbalı Tavan brandası güçlendirilmiş HYVA Alfa model damper silindiri, yüksek ve düşük basınç için uygun Kranklı tam yük destek ayakları SAF akslar, büyük disk frenli, 430 mm 1. dingil KALDIRMA DİNGİLİ WABCO Treyler-EBS, kayma önleyici RSS’li WABCO Smartboard kaldırma ve indirme tertibatı Lastikler 385/65 R 22.5 Alüminyum çıkış merdiveni Kürek ve fırça tutucu Sağ tarafta alet kutusu 4x LED geri vites farı KİRALIK artık yeni SATIN ALMA – bizde FULL SERVİS KİRALIK seçeneğiyle hemen hazır. Laedpfey Dy Hfex Ag Noa

Durumu: kullanılmış, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2024, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 13.513 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı hacmi: 91 m³, toplam genişlik: 2.550 mm, Donanım: ABS, bioSTAR 91.3 m³ Basalt Grey Chassis Type: Moving floor Kingpin Load (national, t): 12 Axle Load (national, t): 8 Axle Spacing (mm): 1310-1310 Fifth Wheel Height (mm): 1150 Chassis Width (mm): 1200 Loading Width (mm): 2475 Chassis Series: 135 Technically Permissible Gross Weight: 39 = 12+9+9+9 (t) Wheelbase (moving floor semi-trailer, mm): 7850 Internal Height Front (mm): 2641 Internal Height Rear (mm): 2821 Loading Length (mm): 13513 Volume (m³): 91.3 Overall Width (mm): 2550 Overall Length (mm): 14000 Chassis Tyre Size: 385/65R22.5 Neck Height (mm): 217 Axles: JOST Brake Version: Disc Brakes Brake Type: JOST - DCA-T7 Wheel Offset (ET): 120 Option: 1st axle with traction aid Traction aid optimised with activation via button in the truck (button is not part of standard equipment) and by depressing the brake pedal three times Option: 3rd axle without Lajdpfx Agexdqbkj Noa Brake Pad Wear Indicator: Connected Tyre Pressure Monitoring: Wabco Trailerpulse Air Suspension: ECAS with lift/lower valve Air suspension lowering via smartboard, as well as by lift/lower valve Pneumatic Coupler: European palm coupling Rims: Speedline Diamond Wheel nut covers: Chrome with STAS logo Landing gear: Weweler, steel gearbox landing legs, with compensating feet, single-sided operation and two speed settings Underrun Protection: Fixed underrun bar Lighting Manufacturer: Aspöck Type: EUROPOINT III - LED 2 LED reversing lights, rear left and right (direction of travel) on lamp bracket Work lights (operated via switch): 2 LED reversing lights at the front left and right, mounted near landing gear Hydraulics Rotary coupling Hydraulic coupling - connection available at the front wall (additional connection at support legs) Hydraulic positioning: pressure return to the left, return flow to the right (CON) Air connection in the tool box Aluminium step ladder 3.80 m, mounted on the right (direction of travel) Broom and shovel holders with three holders each, mounted left on the chassis (direction of travel) Moving Floor System: Cargo Floor brand Air and electric console mounted centrally (direction of travel) with support arch Lighting unit protection: one-piece splash guard Body Front wall angle (°): 90 Rear wall angle (°): 90 Rear wall type: Swing doors A-board: Folding, on rear wall, mounted right (direction of travel) Cover plate between floor and front wall: Fixed aluminium plate and PVC strips Kingpin plate type: Standard Front wall profile: 3 mm - 2 mm Side wall profile: 3 mm - 2 mm, smooth inside and out, double-walled profiles 600 mm wide - 30 mm thick Wear plates: Rectangular 1500 x 1000 x 4 mm Moving floor operation: Radio remote control Cargofloor Control Type: CF 500 SL-C - E-CONTROL Floor profile type: 8 mm ribbed Moving floor end plate: Stainless steel With additional plastic guides under floor profiles End cap reinforcement: Stainless steel shoes over floor profile end caps, with aluminium wear plate above end caps Oil temperature sensor for moving floor system Residual emptying wall Rear wall: Aluminium Rear door design: Split 1/2 to 1/2, with horizontal door closing bar Opening sequence: Right door leaf opens first (STAS manufacturer default) Horizontal door closing bar: Swivelling design Material: Aluminium Rear door locking: 1x turning rod / door half

Durumu: kullanılmış, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2021, bir sonraki muayene (TÜV): 11/2026, yükleme alanı uzunluğu: 13.530 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.730 mm, yükleme alanı hacmi: 92 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Donanım: ABS, STAS Biostar Kayar Taban +/- 92 m³, 'Cargo-Floor' taban 21 adet 6 mm tahta ile, tam boşaltma (hareketli ön duvar), içeri-dışarı kaydırma fonksiyonu, taban için uzaktan kumanda, arkada çift kanatlı kapı ve döner pimli kilit, kasa önünde çıkış ve platform, branda, ön duvarda servis kapısı, kapıların üzerinde katlanabilir kiriş, ABS, EBS, SAF Intradisk+ dingil(ler), 1. dingil kaldırılabilir dingil, disk fren sistemi, Wabco Smartboard, alçaltma-yükseltme özellikli hava süspansiyonu, destek krikosu, paslanmaz çelik alet kutusu, araç reklam folyosu ve/veya yazılarıyla kaplı olabilir. Lasdpfxsyzvxxj Ag Noa SI86735 Teklifimiz genellikle yeni TÜV muayenesi olmadan geçerlidir. Eğer yeni TÜV muayenesi talep edilirse, partner servislerimizin teklifini sunmaktan memnuniyet duyarız! Araç reklam folyosu veya yazısı ile kaplı olabilir. Genel teslimat ve ödeme koşullarımız geçerlidir. Bu ürün için size finansman veya leasing teklifi hazırlamaktan memnuniyet duyarız. Lütfen bizimle iletişime geçin!

Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 12.355 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 608 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 2.165 mm, Üretim yılı: 2026, Equipment: * Chassis material: Aluminium * Chassis type: V-chassis * Kingpin load rating (national, t): 12 * Axle load (national, t): 8 * Axle spacing (mm): 1310-1310 Laodpey Dmv Hefx Ag Nsa * Fifth wheel height (mm): 1150 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 110 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 11364 * KC-Value: 0800 * Overall width (mm): 2550 * Volume (m³): 60.8926 * Wheelbase (mm) (WB): 7470 * Overall length (mm): 12355 * Brake version: Disc brake * Offset (ET): 120 * Option: 1st axle with lift axle and starting aid * Activation of starting aid via push button in truck (installation of push button not included in standard equipment) and by pressing brake pedal three times * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * ECAS air suspension with raise and lower valve * Automatic lowering of air suspension during tipping operation, manual override possible via Smartboard and switch on chassis * Pneumatic coupling head: European palm coupling * Operating console: EBS control positioned on the left in driving direction, in front of the axles * Standard Smartboard * Landing gears: Weweler * Tire size: 385/65R22.5 * Tire pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura-Bright * Tire type: Regional application * TPMS sensor type: rim-mounted sensor * Wheel nut caps: Chrome with STAS logo * Lighting type: ECOLED III - with STAS logo * Work lamp position (switch-operated): 2x LED reverse lamps, rear, left and right in driving direction, mounted on lamp bracket * Work lamp position (switch-operated): 2x LED reverse lamps, front, left and right in driving direction, mounted near landing gears * LEDs in door rear crossbeam: 2 x 3-function LED * Underrun protection operation: manual * Mud flap underrun protection: Black with STAS logo * Cylinder tipping angle: normal ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 8130 * Tipping cylinder max pressure: 250 * Cylinder stage surface finish: Standard * Hydraulic coupling: Rotary coupling * Hydraulic coupling - size: 1 * Hydraulic coupling - gender: female * Hydraulic coupling - hose: 2,500 mm * Mudguard type: Domar STAS with white line * Mud flap type: Clear Pass * Toolbox: 860x520x500 * Air connection: left in driving direction, mounted on lamp carrier * Aluminium ladder: 3 m * Two plastic chocks * Chassis-to-body catch device: Rubber stops Superstructure: * Front wall angle (°): 90 * Rear wall angle (°): 90 * Internal floor crossmember profile angle (°): 90 * Front wall: 4 mm (alu) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads installed below floor crossmembers * Rear wall type: combination door * Rear wall: aluminium * Combination door type: 1/2 - 1/2 with pivoting door header crossbeam * Door header crossbeam: pivoting version * Slider position: 2 pieces, left + right * Additional rear wall locking: double-acting pneumatic * Operation of additional locking: automatic during unloading process, additional manual operation via control on the side of the instrument panel * Number and position of roof bows: 3 central roof bows (central, evenly distributed) and 1 rear roof bow (at the rear) * Roof bow hinge type position: right

Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.880 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 2.165 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.165 mm, Üretim yılı: 2026, Specification: * Chassis material: Aluminium * Chassis type: V-chassis * Fifth wheel load (National): 12 t * Axle spacing (mm): 1310-1310 * Coupling height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 Lodpoy Dmvmsfx Ag Nsaa * Chassis series: 080 * Internal height front (mm): 2165 * Internal height rear (mm): 2165 * Load length (mm): 8880 * KC value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes, and suspension * SAF axles * Offset (ET): 120 * Option: First axle with lift axle and starting aid * Option: Third axle with lift axle and Optiturn * Activation of the additional lift axle via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR) 15 km/h * ECAS air suspension with raise and lower valve * Automatic lowering of air suspension during tipping operation, can be locked manually via Smartboard or chassis switch * Pneumatic coupling head: European palm coupling * Control console: EBS control on the left side in direction of travel, in front of the axles * Standard Smartboard * Air and electrical console on the right in direction of travel * Landing gears: Weweler steel gearbox landing gears, with compensation feet, single-side operation and 2 speed settings * Tire size: 385/65R22.5 * Tire pressure monitoring: Wabco Trailerpulse * Alcoa Dura Bright rims * Tire type: Regional operation * TPMS sensor type: Rim-mounted sensor * TPMS sensor * Chrome wheel nut caps with STAS logo * Working spotlight position (activated by switch): 2 LED reversing lights, rear left and right on the lamp bracket * Working spotlight position (activated by switch): 2 LED reversing lights, front left and right mounted by the landing gears * LEDs in rear cross member: 2 x 3-function LED * Underrun protection, manual operation * Tow eyes, 2 left and right * Mudfl aps underrun protection, black with STAS logo * Cylinder tipping angle normal ±47° * Tipping cylinder model: Hyva - FC 169 * Stroke tipping cylinder: 6480 * Tipping cylinder max. pressure: 250 * Cylinder stage surface treatment: Standard * Hydraulic coupling: Rotating coupling * Hydraulic coupling – size: 1 * Hydraulic coupling – type: Female * Hydraulic hose: 2,500 mm * Mudguard type: Domar STAS with white line * Number of mudflaps on mudguard: 2 * Mudflap type on mudguard: Asphalt * Toolbox: 860x520x500 * Aluminium access ladder, 3 m, right side in direction of travel * Broom and shovel holder * Ferry hooks * 2 lashing rings at the rear of the chassis * Two plastic wheel chocks * Retaining device chassis–body: Rubber polyps Bodywork: * Front wall slope (°): 20 * Rear wall slope (°): 90 * Inner lower belt profile slope (°): 45 * Front wall: 4 mm (aluminium) * Side wall profile: 3 mm – 2 mm * Floor: 8 mm aluminium – 110 Brinell * Rubber pads under floor cross members * Rear wall type: Combination door * Combination door type: 2/3 – 1/3 with pivoting door cross member * Door wing opening: right wing opens first * Door cross member: pivoting version * Hinge type: double door hinge * Slide: rectangular design * Slide position: 1 central * Grain outlet/dust sack: 1 grain funnel incl. dust sack * Smooth rear wall surface * Door wing fixing when open: chain

Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.880 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 2.165 mm, yükleme alanı hacmi: 476 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 2.165 mm, Üretim yılı: 2026, Equipment: * Chassis material: Aluminium * Chassis type: V-frame * Fifth wheel kingpin load (t): 12 (National specification) * Axle spacing (mm): 1310-1310 * Coupling height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm) (WB): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes, and suspension * SAF axles * Offset (ET): 120 * Option: 1st axle with lift axle and start assist * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR): 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping, manually lockable via smartboard and chassis switch * Pneumatic coupling head: European palm coupling * Operating console: EBS controls on the left in direction of travel, in front of the axles * Standard smartboard * Air and electrical console on the right in direction of travel * Support winches: Weweler steel gearbox support winches, type Weweler, with compensating feet, single-sided operation, and 2 speed levels * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura Bright * Tyre type: Regional haul * TPMS sensor type: rim-mounted sensor * TPMS sensor * Chrome wheel nut caps with STAS logo * Work light position (operated by switch): 2 LED reversing lights at the rear, left and right in direction of travel, mounted on the lamp bracket * Work light position (operated by switch): 2 LED reversing lights at the front, left and right in direction of travel, mounted at the support winches * LEDs in door end crossbeam: 2 x 3-function LED * Underrun protection: manual operation * Towing eyes: 2 pcs left and right * Mudflaps underrun protection, black with STAS logo * Cylinder tipping angle, standard: ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Tipping cylinder max. pressure: 250 * Cylinder stage surface treatment: standard surface * Hydraulic coupling: rotary coupling * Hydraulic coupling - size: 1 * Hydraulic coupling - gender: female * Hydraulic coupling - hose: 2,500 mm * Mudguard type: Domar STAS with white line * Number of mudguard flaps: 2 pcs * Mudguard flap type: Asphalt * Toolbox: 860x520x500 * Aluminium access ladder 3 m - right side in direction of travel * Broom and shovel holder * Ferry hooks * 2 lashing rings at the rear of the chassis * Two plastic wheel chocks * Catch device chassis - body rubber buffer Laodpfsy Dmvaox Ag Nsa Body: * Front wall angle (°): 20 * Rear wall angle (°): 90 * Lower belt profile inside angle (°): 45 * Front wall: 4 mm (aluminium) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads fitted underneath floor crossmembers * Rear wall type: combination door * Combination door type: 2/3 - 1/3 with pivoting door end crossbeam * Door leaf opening: right side opens first * Door end crossbeam in pivoting design * Hinge type: double door hinge * Slide: rectangular design * Slide position: 1 pc, centered * Grain outlet / Dust sack: 1 grain funnel incl. dust sack * Smooth surface rear wall * Open door leaf secured by chain * Rear wall sealing with standard rubber gasket * Extra alu round profile