Çalışma platformlu römorkMÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit Auffahrrampen
Çalışma platformlu römork
MÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit Auffahrrampen
sabit fiyat KDV hariç
€32.950
(€39.210 brüt)
Üretim yılı
2024
Durumu
Yeni
Konum
Egestorf 

Resimleri göster
Haritayı göster
Temel veriler
Fiyat ve Konum
sabit fiyat KDV hariç
€32.950
(€39.210 brüt)
- Konum:
- Eichenstich 12, 21272 Egestorf, DE

Ara
Teknik detaylar
- Azami yük ağırlığı:
- 14.550 kg
- Toplam ağırlık:
- 19.000 kg
- Dingil konfigürasyonu:
- 2 dingil
- Yükleme alanı uzunluğu:
- 6.270 mm
- Yükleme alanı genişliği:
- 2.470 mm
- Yükleme alanı yüksekliği:
- 400 mm
Teklif detayları
- Listeleme kimliği:
- A128-69-369
- Referans no.:
- 59541
- Son güncelleme tarihi:
- 25.06.2025
Açıklama
* ETÜ-TA-R 19.0:
* Wabco EBS-E (electronic braking system)
* TPMS (tire pressure monitoring system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension, drawbar with 50 mm flange eye and height-adjustable drawbar
* Jost landing gear at the front
* External folding support legs at the rear
* Toolbox made of galvanized sheet steel, approx. 650 x 350 x 320 mm, mounted laterally on the right (powder-coated in black)
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED tail lights
* Reinforcement package for drill rig transport on chassis – loading height + 20 mm
* 50 mm softwood floor, clamped design
* Provisions in front of the bulkhead for subsequent installation of container locks
* Bolted smooth sheet steel front wall
* Drop-down side walls of trapezoidal profiled steel with tailgate spring assist
Bedjpk D D Hjpfx Ahxsdi
* Steel rear panel, retractable between ramps – bracket inside ahead of front wall for storage when not in use
* Bolted rear stanchions
* Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing rings every 600 mm possible
* In each front and rear corner: one 10 t lashing point; various holes for 1.2 t lashing options in the front and rear cross members
* One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (can be compacted to 20 mm)
* Rear approach angle approx. 860 mm
* Chassis, drawbar, front wall, tailgate, rear folding supports, and access ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in black
* Wheelbase: 1,310 mm
* Tires: 235/75R17.5
* Side board coating in RAL 9010 pure white
* Painting of the side walls in a RAL color of your choice available at extra charge
* New vehicle with manufacturer's warranty
* Subject to changes and prior sale
* Immediately available from Egestorf
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
* Wabco EBS-E (electronic braking system)
* TPMS (tire pressure monitoring system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension, drawbar with 50 mm flange eye and height-adjustable drawbar
* Jost landing gear at the front
* External folding support legs at the rear
* Toolbox made of galvanized sheet steel, approx. 650 x 350 x 320 mm, mounted laterally on the right (powder-coated in black)
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED tail lights
* Reinforcement package for drill rig transport on chassis – loading height + 20 mm
* 50 mm softwood floor, clamped design
* Provisions in front of the bulkhead for subsequent installation of container locks
* Bolted smooth sheet steel front wall
* Drop-down side walls of trapezoidal profiled steel with tailgate spring assist
Bedjpk D D Hjpfx Ahxsdi
* Steel rear panel, retractable between ramps – bracket inside ahead of front wall for storage when not in use
* Bolted rear stanchions
* Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing rings every 600 mm possible
* In each front and rear corner: one 10 t lashing point; various holes for 1.2 t lashing options in the front and rear cross members
* One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (can be compacted to 20 mm)
* Rear approach angle approx. 860 mm
* Chassis, drawbar, front wall, tailgate, rear folding supports, and access ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in black
* Wheelbase: 1,310 mm
* Tires: 235/75R17.5
* Side board coating in RAL 9010 pure white
* Painting of the side walls in a RAL color of your choice available at extra charge
* New vehicle with manufacturer's warranty
* Subject to changes and prior sale
* Immediately available from Egestorf
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2001
İstek gönder
Telefon & Faks
+49 40 33... ilanlar
Bu ilanlar da ilginizi çekebilir.
İlanınız başarıyla silindi
Bir hata oluştu














































