Alçak şasi römorkMÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit Auffahrrampen
Alçak şasi römork
MÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit Auffahrrampen
sabit fiyat KDV hariç
€32.950
(€39.210 brüt)
Üretim yılı
2024
Durumu
Yeni
Konum
Egestorf 

Resimleri göster
Haritayı göster
Temel veriler
Fiyat ve Konum
sabit fiyat KDV hariç
€32.950
(€39.210 brüt)
- Satıcının konumu:
- Eichenstich 12, 21272 Egestorf, Almanya

Ara
Teknik detaylar
- Azami yük ağırlığı:
- 14.550 kg
- Toplam ağırlık:
- 19.000 kg
- Dingil konfigürasyonu:
- 2 dingil
- Yükleme alanı uzunluğu:
- 6.270 mm
- Yükleme alanı genişliği:
- 2.470 mm
- Yükleme alanı yüksekliği:
- 400 mm
Teklif detayları
- Listeleme kimliği:
- A128-69-474
- Referans no.:
- 5954
- Son güncelleme tarihi:
- 10.07.2025
Açıklama
* ETÜ-TA-R 19.0:
* Wabco EBS-E (electronic braking system)
* TPMS (tire pressure monitoring system)
* Emergency release mechanism for spring brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension, drawbar with 50 mm flange eye and height-adjustable drawbar
* Jost front landing gear
* Rear external folding supports
* Tool box made of galvanized sheet steel, approx. 650 x 350 x 320 mm, mounted right side (powder-coated in black)
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED tail lights
* Reinforcement package for drill rig transport on chassis – loading height +20 mm
* 50 mm softwood floor, clamped design
* Provision in front of the bulkhead for retrofitting container locks
* Bolted smooth sheet steel bulkhead
* Drop-side panels made of trapezoidal profile sheet steel, foldable with spring-assisted sideboard lifter
* Steel rear panel, slidable between the ramps (storage bracket in front of the bulkhead when not in use)
* Bolted rear stakes
* Perforated external frame, approx. 45° bent with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing brackets every 600 mm
* In each front and rear corner: 1 x 10 t lashing ring; various boreholes for 1.2 t lashing points in the bulkhead and rear crossmember
* One-piece mechanical grating ramps with spring mechanism for one-man operation, approx. 2,750 x 620 mm (compressible down to 20 mm)
* Rear ramp incline approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, rear folding supports, and ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted black
* Wheelbase: 1,310 mm
* Tires: 235/75R17.5
* Side panel finish painted in RAL 9010 pure white
* Side panel painting in other RAL colors available at extra cost
* New vehicle with manufacturer's warranty
Todpspk D Ncjfx Acxed
* Subject to errors and prior sale
* Immediately available ex Egestorf
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
* Wabco EBS-E (electronic braking system)
* TPMS (tire pressure monitoring system)
* Emergency release mechanism for spring brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension, drawbar with 50 mm flange eye and height-adjustable drawbar
* Jost front landing gear
* Rear external folding supports
* Tool box made of galvanized sheet steel, approx. 650 x 350 x 320 mm, mounted right side (powder-coated in black)
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED tail lights
* Reinforcement package for drill rig transport on chassis – loading height +20 mm
* 50 mm softwood floor, clamped design
* Provision in front of the bulkhead for retrofitting container locks
* Bolted smooth sheet steel bulkhead
* Drop-side panels made of trapezoidal profile sheet steel, foldable with spring-assisted sideboard lifter
* Steel rear panel, slidable between the ramps (storage bracket in front of the bulkhead when not in use)
* Bolted rear stakes
* Perforated external frame, approx. 45° bent with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing brackets every 600 mm
* In each front and rear corner: 1 x 10 t lashing ring; various boreholes for 1.2 t lashing points in the bulkhead and rear crossmember
* One-piece mechanical grating ramps with spring mechanism for one-man operation, approx. 2,750 x 620 mm (compressible down to 20 mm)
* Rear ramp incline approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, rear folding supports, and ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted black
* Wheelbase: 1,310 mm
* Tires: 235/75R17.5
* Side panel finish painted in RAL 9010 pure white
* Side panel painting in other RAL colors available at extra cost
* New vehicle with manufacturer's warranty
Todpspk D Ncjfx Acxed
* Subject to errors and prior sale
* Immediately available ex Egestorf
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2001
İstek gönder
Telefon & Faks
+49 40 33... ilanlar
Bu ilanlar da ilginizi çekebilir.
İlanınız başarıyla silindi
Bir hata oluştu














































