Mafsallı teleskopik çalışma platformu

Haulotte HA12CJ+ Valid inspection, *Guarantee! Electric, 12

Durumu: kullanılmış, Üretim yılı: 2024, çalışma saatleri: 69 h, makine/araç numarası: 2152957, Boş ağırlık: 7.040 kg Direk: eklemli kol Kaldırma kapasitesi: 230 kg Çalışma yüksekliği: 1.200 cm Ön lastik durumu: 90 Arka lastik durumu: 90 Maks. yatay erişim: 7,22 m Taşıma ölçüleri (U x G x Y): 5,64x1,2x1,99 Dcjdpfx Ahjuwxvks Doc Daha fazla bilgi için PFEIFER GROUP ile iletişime geçin.

Durumu: kullanılmış, boş ağırlık: 10.900 kg, azami yük ağırlığı: 43.600 kg, toplam ağırlık: 54.500 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/2025, yükleme alanı uzunluğu: 8.700 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 855 mm, lastik boyutu: 245/70 r17.5, renk: gri, Üretim yılı: 2025, işletme ağırlığı: 10.900 kg, Donanım: ABS, Gooseneck, rigid, central tube design: - Enclosed outer frame with cut-outs for lashing straps (LC 1,500 daN) - Steel floor covering with anti-slip coating - Including perforated rail for aluminium approach ramps - 2" king pin - Mechanically operated BPW landing legs - 550 mm long, 8° incline at the gooseneck end - Front wall including storage position for rear wall, 400 mm high - Spare wheel holder mounted upright at the front of the gooseneck - 3 pairs of recessed lashing rings LC 5,000 daN in the loading area of the gooseneck - Aluminium drop-in side walls, 400 mm high, consisting of 2x side walls (3,150 mm length) and rear wall with stanchions (galvanised) - Storage box rectangular, aluminium, folding lid, lockable, approx. 400 x 800 mm, centre - Storage box 45’, aluminium, folding lid, lockable, approx. 400 x 800 mm, left - Storage box 45’, aluminium, folding lid, lockable, approx. 400 x 800 mm, right Loading platform, single extendable: - Enclosed outer frame with cut-outs for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Sheet metal floor covering with anti-slip coating - Angled interface between fixed section and loading platform for bridging rails and wheel recesses - Excavator recess including longitudinal slots for cargo securing (LC 1,500 daN), approx. 3,850 mm length - Preparation for hydraulic ramp (electrical supply) - Outriggers for widening to 3,000 mm - Angled vehicle rear, 8°, 550 mm long - Sled design for easy installation and removal of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally located on loading platform behind gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally at the rear of the loading platform - 1 pair of stanchion pocket rails approx. in the centre of the loading platform - 1 pair of stanchion pocket rails on the fixed section - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic split folding ramps, 2,750+1,500x800 mm - Larch wood covering - Remote control operation (wired and wireless options) - Ramps with quick-change (dismantling) system Chassis: Dcodpsi Ai E Rjfx Ah Dec - Axle make: BPW ECO Max - 2 ride heights - 4 axles at 10 t each (technically 12 t) - Twin tyres 245/70 R17.5 - 2 x rigid axle and 2 x friction-steered axle - Reverse steering lock for friction-steered axle by engaging reverse gear - Brake system: Knorr brand (according to EU regulations with EBS-E) - TIM G2 from Knorr (Trailer Information Module) - RSS (Roll Stability Support) - Load-dependent lift axle on the first axle including starting aid (forced lowering of the lift axle via TIM possible) Accessories: - 4 wheel chocks with holders - 2 pairs of warning boards 423 mm x 423 mm, with 2 position lights and socket for beacon, infinitely adjustable up to 3,950 mm - Lashing options at gooseneck and on loading platform (alternatively on ramp, if present) included - Removable splash plate at the end of the excavator recess - Electro-hydraulic unit for ramp operation - Wireless remote control for ramp operation - Hydraulic support legs at vehicle rear for support during loading - 1 pair additional reversing lights at rear, activated with reverse gear - Wooden broadening planks – larch (option)

Durumu: kullanılmış, Üretim yılı: 2024, çalışma saatleri: 68 h, makine/araç numarası: 2153420, Boş ağırlık: 7.040 kg Direk: eklemli kol Kaldırma kapasitesi: 230 kg Dcedpfeuwxwzex Ah Doc Çalışma yüksekliği: 1.200 cm Ön lastik durumu: 90 Arka lastik durumu: 90 Maks. yatay erişim: 7,22 m Taşıma ölçüleri (U x G x Y): 5,64x1,2x1,99 Daha fazla bilgi için PFEIFER GROUP ile iletişime geçin.

Durumu: kullanılmış, Üretim yılı: 2022, çalışma saatleri: 182 h, makine/araç numarası: 2112994, Tahrik: Tekerlekli Boş ağırlık: 7.040 kg Direk: Eklemli bom Dcjdpfjuwv Auex Ah Dsc Kaldırma kapasitesi: 230 kg Çalışma yüksekliği: 1.200 cm Maksimum yatay erişim: 700 m Taşıma ölçüleri (U x G x Y): 5,64x1,2x1,99 Daha fazla bilgi için PFEIFER GROUP ile iletişime geçin.

Durumu: kullanılmış, azami yük ağırlığı: 42.500 kg, toplam ağırlık: 60.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2022, with 12 axles, split, hydraulically suspended, hydromechanical forced steering, with rear bevel and drive-on ramps STZ-L gooseneck - robust steel welded construction - designed loading area: 3,950 x 2,480 mm including bevel - hydromechanical forced steering (dual circuit steering) - turntable-mounted saddle plate with replaceable 2 or 3.5 inch king pin and adjustable steering wedge - fifth wheel load: 24 t - steering radius to rear: 2,600 mm Loading Area - recessed outer sections: 4,630 mm, 420 mm deep, providing a loading height of 470 mm or 830 mm with decks installed - extendable by 2,053 mm - including aluminium bridging ramps for creating a level platform - excavator arm trough at rear chassis: 4,900 mm long, 880 mm wide, 480 mm deep - rear chassis length: 4,900 mm incl. 500 mm bevel, loading height 890 mm - one pair of wheel recesses in the lower loading area - hydraulically suspended 3-axle chassis - split Gigant axles with 600 mm lift Rear of vehicle - design: “Beveled” 500 mm - hydraulic rear support Drive-on ramps - two-piece drive-on ramps, length 2,850 + 1,850 mm, width 800 mm - rubber coating with climbing strips Braking System - two-line all-wheel pneumatic brake system with diaphragm brake cylinders - automatic load-dependent brake (ALB) - automatic linkage plates (AGS) - parking brake via spring-loaded cylinders - ABS/ABV brake Special equipment Radio remote control for steering and ramp control Central lubrication system Technical data Gooseneck Loading area (LxW): 3,950 x 2,480 mm Saddle height loaded: 1,300 mm Loading area Loading platform (LxW): 10,030 mm x 2,850 mm, extendable by 2,053 mm recessed outer sections 4,630 mm long plus 2,053 mm extension center beam 980 mm excavator arm trough: 4,900 mm long, 880 mm wide, 480 mm deep Steering 1st axle to 3rd axle: hydromechanically forced steering (dual circuit steering) Dsdpfx Asw Etd Toh Djcc

Durumu: kullanılmış, Üretim yılı: 2024, çalışma saatleri: 103 h, makine/araç numarası: 2152903, Boş ağırlık: 7.040 kg Direk: eklemli kol Dedpfx Ajuwxtpeh Djcc Kaldırma kapasitesi: 230 kg Çalışma yüksekliği: 1.200 cm Ön lastik durumu: 90 Arka lastik durumu: 90 Maks. yatay erişim: 7,22 m Taşıma ölçüleri (U x G x Y): 5,64x1,2x1,99 Daha fazla bilgi için PFEIFER GROUP ile iletişime geçin.

Durumu: kullanılmış, Üretim yılı: 2024, çalışma saatleri: 96 h, makine/araç numarası: 2152900, Boş ağırlık: 7.040 kg Direk: eklemli kol Kaldırma kapasitesi: 230 kg Çalışma yüksekliği: 1.200 cm Ön lastik durumu: 90 Dcsdeuwxtispfx Ah Dec Arka lastik durumu: 90 Maks. yatay erişim: 7,22 m Taşıma ölçüleri (U x G x Y): 5,64x1,2x1,99 Daha fazla bilgi için PFEIFER GROUP ile iletişime geçin.

Durumu: kullanılmış, boş ağırlık: 10.730 kg, azami yük ağırlığı: 38.770 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5 3PMSF, renk: gri, Üretim yılı: 2024, Donanım: ABS, Gooseneck: - Gooseneck with front chamfered corners at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Extendable loading platform: - Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° - 6 pairs of outward-folding lashing rings - 3 pairs of outward-folding lashing rings - 1 pair of horizontal lashing rings in the front section of the loading area Dedpfx Aevcpageh Dscc - Cut-outs in the outer frame of the loading area for securing load straps - Approximately 48 mm thick hardwood flooring, checker plate above the axles Two-piece steel ramps: - One pair of galvanised, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm with approx. 48 mm hardwood covering - Ramps hydraulically foldable, with hydraulic lifting mechanism and hydraulic side movement - Maximum load per pair: approx. 40,000 kg Axles and tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear and manually - Air suspension with raise/lower valve - Axle tool kit - 235/75 R 17.5 3PMSF tyres - TPMS tire pressure monitoring system Paintwork: - Superior and durable corrosion protection for the standard shot-blasted welded frame guaranteed by 2-component zinc dust primer - High-quality, single-tone 2-component top coat in MB 7350 Novagrau Accessories included: - One spare wheel with holder in front of the bulkhead - 2” kingpin - Galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanised connection rail at the front - 4 wheel chocks with holder at the front bulkhead - Rear lighting bracket for a rotating beacon - Fixture at the rear of the gooseneck for ALU approach ramps - Galvanised folding support legs beneath the loading platform’s chamfer - Cover plates to bridge the gap between ramps and load area - White reflective tape according to EU regulations on the sides, extension, and red at the rear - Electro-hydraulic power unit at the rear, beneath the load area - Holders for warning signs with sockets on both sides of gooseneck and ramps - Control valves for the ramps on the right-hand side of the trailer - Removable aluminium side walls and rear wall on the gooseneck approx. 2,440 x 400 mm - Rear, galvanised removable stakes, body length approx. 2,560 mm - Four extendable warning signs approx. 423 x 423 mm (extend by approx. 400 mm each) with position light - 3 pairs of WADER container pockets in the loading surface for 20ft, 30ft, or 40ft containers - 6 pairs of stake pockets approx. 100x50 mm in the outer frame of the loading area - Galvanised, extendable width extensions (approx. 230 mm per side) - Square-climbing strips 20 x 20 mm every 200 mm along the outer frame chamfer of the platform - Painted sand layer on checker plate above the kingpin and loading area as anti-slip protection - Mounting bracket for revolving beacon on warning boards - European (red-yellow) rear reflective plates as per regulation - 80 km/h speed stickers on rear and both sides - Load gauge for axle load determination including load diagram - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot blasted, then defined visible surfaces metallized with ZINACOR 850 (Zinc 85% - Aluminium 15%) hot finish

Durumu: kullanılmış, azami yük ağırlığı: 23.000 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2025, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2025, Donanım: ABS, GVN 3GVN29 OVERSIZED PLATFORM *KOC*LIFT*P ----VEHICLE HISTORY * NEW VEHICLE * VIDEO AVAILABLE ON REQUEST VEHICLE FEATURES TECHNICAL DATA AND EQUIPMENT SHEET, VEHICLE TYPE: * GVN TRAILER – 3-AXLE EUROPEAN MODEL TRADE NAME: * 3GVN29 ----WEIGHT SPECIFICATIONS UNLADEN WEIGHT * 13,000 kg AXLE LOAD DISTRIBUTION 1st axle: 3,653 kg 2nd axle: 3,653 kg 3rd axle: 3,653 kg ACTUAL VEHICLE WEIGHT * 13,000 kg TECHNICALLY PERMISSIBLE MAXIMUM TOTAL WEIGHT * 58,000 kg TECHNICALLY PERMISSIBLE MAXIMUM AXLE LOADS 1st axle: 12,000 kg 2nd axle: 12,000 kg 3rd axle: 12,000 kg TECHNICALLY PERMISSIBLE MAXIMUM WEIGHT FOR AXLE GROUPS 1st group: 36,000 kg MAXIMUM TOTAL WEIGHT FOR REGISTRATION * 35,500 kg MAXIMUM AXLE LOADS FOR REGISTRATION 1st axle: 8,000 kg 2nd axle: 8,000 kg 3rd axle: 8,000 kg MAXIMUM WEIGHT FOR AXLE GROUPS FOR REGISTRATION 1st group: 24,000 kg TECHNICALLY PERMISSIBLE MAXIMUM STATIC LOAD ON KINGPIN * 22,000 kg MAIN TECHNICAL DIMENSIONS (COC) • OVERALL LENGTH: 13,050 mm • CARGO BED LENGTH: 9,200 mm • VEHICLE WIDTH: 2,550 mm • OVERALL HEIGHT: 3,000 mm • PLATFORM HEIGHT: approx. 910 mm • NUMBER OF AXLES: 3 • TYRE SIZE: 235/75 R17.5 • SUSPENSION: AIR SUSPENSION • COLOUR: RAL 5011 ----EQUIPMENT LIST • EXTENDED GOOSENECK • FIXED GOOSENECK • STEEL FRONT WALL • 2 DETACHABLE STEEL SIDE DOORS • 1 DETACHABLE STEEL REAR FLAP • FRONT TOOLBOX • FRONT TOOLBOX UNDER THE CATWALK • LOADING PLATFORM ABOVE THE CATWALK LOADING PLATFORM • HIGH-STRENGTH S355 STEEL • PLATFORM EDGES CLAD WITH WOOD • PLATFORM SURFACE COVERED WITH STEEL SHEET • 14 SIDE EXTENSIONS EACH +230 mm • 14 FORGED STEEL LASHING RINGS, 16 TON EACH • EXTENDABLE OVERSIZE BOARDS • WIDE LOAD THRESHOLDS • WARNING SIGN FOR OVERSIZE LOAD • ATTACHMENT POINTS • ADDITIONAL SUPPORTS • PRESSURE INDICATOR AXLES AND SUSPENSION • 3 AXLES • OSMAN KOC AXLES, BPW-COMPATIBLE • 3RD AXLE STEERABLE • 1ST AXLE LIFTABLE • TWIN TYRES ON ALL AXLES • FULL AIR SUSPENSION ON ALL AXLES • 1ST LIFT AXLE WITH DRUM BRAKES BRAKE SYSTEM • WABCO EBS ELECTROPNEUMATIC SYSTEM, EC STANDARD • AUTOMATIC REVERSE ALIGNMENT OF STEERED AXLE • DRUM BRAKES ON ALL AXLES TYRES AND RIMS • TYRES: 235/75 R17.5 Dcjdpfow Dlqisx Ah Doc • SPARE TYRE: YES • WHEELS: 12 • MAX SPEED: 80 km/h • RIMS: 6.75x17.5, STEEL, SILVER-GREY • SPARE WHEEL INCLUDED PAINTWORK • 2 COATS OF EPOXY PRIMER, EACH 100 MICRON • MINIMUM 100 MICRON 2K ACRYLIC PAINT • COLOUR: RAL 5011 ELECTRICAL SYSTEM AND LIGHTING • 24-VOLT SYSTEM, EC STANDARD • WATERPROOF AND FROST-PROOF CONNECTIONS • SIDE AND POSITION LIGHTS • 6 REAR LIGHTS, 3-FUNCTION • 2 REVERSING AND WORK LIGHTS • 2 INDICATORS • 2 NUMBER PLATE LIGHTS • 1 ROTATING BEACON • 2 TRIANGULAR REFLECTORS • REFLECTIVE STRIPS AND E-MARKING • TRAILER LIGHT SYSTEMS • ROTATABLE REAR WORK LIGHTS RAMP • FIXED HYDRAULIC ACCESS RAMPS • HYDRAULIC SIDE SHIFT LEFT/RIGHT • SUPPORT LEGS: 24 TONS DYNAMIC, 50 TONS STATIC (OMS) • MANUAL RAMP SUPPORT LEGS • POWER SUPPLY FOR HYDRAULICS

Durumu: kullanılmış, Üretim yılı: 2023, çalışma saatleri: 285 h, yük kapasitesi: 3.500 kg, kaldırma yüksekliği: 4.680 mm, yakıt türü: elektrikli, direk tipi: triplex, inşaat yüksekliği: 2.180 mm, lastik durumu: 100 yüzde, ön lastik ölçüsü: 315/45-12, arka lastik boyutu: 180/70-8, boş ağırlık: 5.860 kg, toplam uzunluk: 2.530 mm, renk: diğer, Attachments: Side shifter. Special equipment: 3rd valve, 4th valve, rear work lights, front work lights, heater, full cab, full free lift, non-marking tires, Dcsdpfxjv Nblhe Ah Dec