Alçak şasi dorse

GVN 3GVN29 * ÜBERBREITE TAFEL*KOC*LIFT*P

Durumu: kullanılmış, kilometre: 348.600 km, güç: 375 kW (509,86 bg), ilk tescil: 12/2017, yakıt türü: dizel, boş ağırlık: 14.500 kg, toplam ağırlık: 32.000 kg, lastik boyutu: 315/80 R22,5, dingil konfigürasyonu: 8x4, frenler: retarder, renk: sarı, vites türü: otomatik, süspansiyon: çelik-hava, Donanım: ABS, diferansiyel kilidi, düşük ses seviyesi, ek farlar, hız sabitleyici, park ısıtıcısı, retarder, tır çekici bağlantısı, çekiş kontrolü, Urea tank (AdBlue) Displacement 12,809 cc 50 mm trailer coupling Hydraulics (PTO) EBS (Electronic Braking System) Navigation system Euro 6 C Payload: 17,500 kg Automatic climate control Dautel steel round tipper body Hydraulic tailgate, swinging Fifth wheel coupling Foldable underrun protection Sun visor All-round warning beacons Air and electrical connections for trailer operation Weights: Bedsvk Un Sspfx Afgocw Drawbar trailer load (SDAH): 18,000 kg Trailer load: 55,000 kg Gross combination weight: 68,000 kg Tractor unit unladen weight: 11,990 kg Gross combination weight: 64,000 kg Subject to errors and omissions.

Durumu: kullanılmış, boş ağırlık: 10.900 kg, azami yük ağırlığı: 43.600 kg, toplam ağırlık: 54.500 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/2025, yükleme alanı uzunluğu: 8.700 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 855 mm, lastik boyutu: 245/70 r17.5, renk: gri, Üretim yılı: 2025, işletme ağırlığı: 10.900 kg, Donanım: ABS, Gooseneck, rigid, central tube design: - Enclosed outer frame with cut-outs for lashing straps (LC 1,500 daN) - Steel floor covering with anti-slip coating - Including perforated rail for aluminium approach ramps - 2" king pin - Mechanically operated BPW landing legs - 550 mm long, 8° incline at the gooseneck end - Front wall including storage position for rear wall, 400 mm high - Spare wheel holder mounted upright at the front of the gooseneck - 3 pairs of recessed lashing rings LC 5,000 daN in the loading area of the gooseneck - Aluminium drop-in side walls, 400 mm high, consisting of 2x side walls (3,150 mm length) and rear wall with stanchions (galvanised) - Storage box rectangular, aluminium, folding lid, lockable, approx. 400 x 800 mm, centre - Storage box 45’, aluminium, folding lid, lockable, approx. 400 x 800 mm, left - Storage box 45’, aluminium, folding lid, lockable, approx. 400 x 800 mm, right Loading platform, single extendable: - Enclosed outer frame with cut-outs for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Sheet metal floor covering with anti-slip coating - Angled interface between fixed section and loading platform for bridging rails and wheel recesses - Excavator recess including longitudinal slots for cargo securing (LC 1,500 daN), approx. 3,850 mm length - Preparation for hydraulic ramp (electrical supply) - Outriggers for widening to 3,000 mm - Angled vehicle rear, 8°, 550 mm long - Sled design for easy installation and removal of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally located on loading platform behind gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally at the rear of the loading platform - 1 pair of stanchion pocket rails approx. in the centre of the loading platform - 1 pair of stanchion pocket rails on the fixed section - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic split folding ramps, 2,750+1,500x800 mm - Larch wood covering - Remote control operation (wired and wireless options) - Ramps with quick-change (dismantling) system Chassis: - Axle make: BPW ECO Max - 2 ride heights - 4 axles at 10 t each (technically 12 t) - Twin tyres 245/70 R17.5 - 2 x rigid axle and 2 x friction-steered axle - Reverse steering lock for friction-steered axle by engaging reverse gear - Brake system: Knorr brand (according to EU regulations with EBS-E) - TIM G2 from Knorr (Trailer Information Module) Bcjdpfx Afei Ai E Rjgsw - RSS (Roll Stability Support) - Load-dependent lift axle on the first axle including starting aid (forced lowering of the lift axle via TIM possible) Accessories: - 4 wheel chocks with holders - 2 pairs of warning boards 423 mm x 423 mm, with 2 position lights and socket for beacon, infinitely adjustable up to 3,950 mm - Lashing options at gooseneck and on loading platform (alternatively on ramp, if present) included - Removable splash plate at the end of the excavator recess - Electro-hydraulic unit for ramp operation - Wireless remote control for ramp operation - Hydraulic support legs at vehicle rear for support during loading - 1 pair additional reversing lights at rear, activated with reverse gear - Wooden broadening planks – larch (option)

Durumu: kullanılmış, Üretim yılı: 1972, çalışma saatleri: 7.095 h, güç: 49 kW (66,62 bg), bir sonraki muayene (TÜV): 08/2024, Donanım: ön bağlantı, Serialnummer 206 IHC 72194 AS Traktor Bjdju Ddtuspfx Afgocw Bereifung: 9.5/9-24 vorne und 16.9/14-30 hinten Leistung: 49 kW Leergewicht: 2.895 kg

Durumu: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 9.000 kg, azami yük ağırlığı: 29.000 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2006, yükleme alanı uzunluğu: 10.500 mm, yükleme alanı genişliği: 2.440 mm, yükleme alanı yüksekliği: 2.200 mm, yükleme alanı hacmi: 55 m³, süspansiyon: hava, lastik boyutu: 385.65 r 22.5, renk: kırmızı, Üretim yılı: 2006, Donanım: ABS, Menci tipper semitrailer for scrap, 55 m³ capacity, Menci aluminum chassis and OMT reinforced steel body, 3 disc-braked axles with liftable first axle and steering third axle, EBS, swing door with manual locking latches, electric sliding tarpaulin with PVC cover, double stainless steel toolbox, swiveling rear underrun bar, unladen weight 9 tons, year 2006, serviced until 30/06/2024 – DEALER: INTERDRIVE SRL, PARMA. Bcodpfx Ajtt Dyxofgew

Durumu: yeni, Üretim yılı: 2025, Mini excavator 825 kg with protective canopy, articulated boom (Knickmatic), hydraulic thumb, dozer blade, auxiliary hydraulic circuit Bcedpow A Uxtefx Afgew incl. quick coupler + bucket set: 25 cm, 40 cm digging buckets + 80 cm ditch cleaning bucket Single-cylinder diesel engine with 11 HP

Durumu: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, yakıt türü: dizel, dingil konfigürasyonu: 4x4, koltuk sayısı: 1, Üretim yılı: 2013, çalışma saatleri: 2.000 h, Donanım: her tahrikli, tır çekici bağlantısı, Thwaites Dumper Model: Mach Year of manufacture: 2013 Approx. 2,000 operating hours Bjdper H Df Sefx Afgecw 3-ton capacity Swivel skip Sale exclusively to commercial customers and for export. Subject to prior sale and errors. The quoted price is net.

Durumu: kullanılmış, azami yük ağırlığı: 42.500 kg, toplam ağırlık: 60.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2022, with 12 axles, split, hydraulically suspended, hydromechanical forced steering, with rear bevel and drive-on ramps Bodpfxjw Etd Tj Afgecw STZ-L gooseneck - robust steel welded construction - designed loading area: 3,950 x 2,480 mm including bevel - hydromechanical forced steering (dual circuit steering) - turntable-mounted saddle plate with replaceable 2 or 3.5 inch king pin and adjustable steering wedge - fifth wheel load: 24 t - steering radius to rear: 2,600 mm Loading Area - recessed outer sections: 4,630 mm, 420 mm deep, providing a loading height of 470 mm or 830 mm with decks installed - extendable by 2,053 mm - including aluminium bridging ramps for creating a level platform - excavator arm trough at rear chassis: 4,900 mm long, 880 mm wide, 480 mm deep - rear chassis length: 4,900 mm incl. 500 mm bevel, loading height 890 mm - one pair of wheel recesses in the lower loading area - hydraulically suspended 3-axle chassis - split Gigant axles with 600 mm lift Rear of vehicle - design: “Beveled” 500 mm - hydraulic rear support Drive-on ramps - two-piece drive-on ramps, length 2,850 + 1,850 mm, width 800 mm - rubber coating with climbing strips Braking System - two-line all-wheel pneumatic brake system with diaphragm brake cylinders - automatic load-dependent brake (ALB) - automatic linkage plates (AGS) - parking brake via spring-loaded cylinders - ABS/ABV brake Special equipment Radio remote control for steering and ramp control Central lubrication system Technical data Gooseneck Loading area (LxW): 3,950 x 2,480 mm Saddle height loaded: 1,300 mm Loading area Loading platform (LxW): 10,030 mm x 2,850 mm, extendable by 2,053 mm recessed outer sections 4,630 mm long plus 2,053 mm extension center beam 980 mm excavator arm trough: 4,900 mm long, 880 mm wide, 480 mm deep Steering 1st axle to 3rd axle: hydromechanically forced steering (dual circuit steering)

Durumu: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, güç: 205 kW (278,72 bg), yakıt türü: dizel, toplam ağırlık: 20.000 kg, Üretim yılı: 2025, çalışma saatleri: 400 h, Donanım: UVV güvenlik kontrolü, araç içi bilgisayar, ayarlanabilir bom, We are pleased to offer you a WERT Phantom two-shaft shredder. - used machine - Drive – Engine: CAT-C7 – 285 HP Hydraulics: Bosch-Rexroth Torque / Gearbox: 240,000 Nm Discharge Height: 3,100 mm Discharge Conveyor: 1,000 mm wide Diesel Tank: 380 l Hydraulic Tank: 120 l Shaft Length: 1,500 mm Shaft Diameter: 650 mm Magnet Weight: 1.1 t Total Weight: 18.5 t Bodpfow T Stbjx Afgocw Dimensions (L x W x H): 9.2 x 2.3 x 2.55 m Two-shaft shredder – ready for the future of recycling technology. A true innovation in the shredding industry. Driven by the vision to create a shredder capable of processing stone, minerals, concrete, as well as waste wood, green waste, root wood, municipal and industrial waste, paper, or light scrap, we succeeded in developing the PHANTOM. This multifunctional shredder features a revolutionary quick-change shaft system and a tool changing system. These innovative systems allow fast, simple, and low-maintenance replacement of shredder shafts to suit your application. Manufactured to the highest quality standards – “Made in Germany” – and designed for straightforward, user-friendly operation to ensure maximum performance and optimal cost-effectiveness. Feel free to contact us for further questions! Our listings are prepared with the utmost care. However, we cannot guarantee the accuracy, completeness, or current validity of the information and prices provided.

Durumu: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start assist for shunting operations activated on the first axle via EBS (no installation required on the truck side) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Trailing axle lock for shunting, controlled from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with raising and lowering function and ride height control valve ----Electrics / Lighting: * Smart-board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring with display capability in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Side underrun protection * Support legs at the front and swivel jacks at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning board kits at front and rear * Pivoting arm as carrier for connection lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Semi-trailer platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid Bedjtpta Djpfx Afgocw * Removable and fold-down 400 mm high aluminum sideboards on the semi-trailer platform (in custom RAL color) * 150 mm high inserted rear panel * Rear bevel on the semi-trailer platform to the low-bed area, approx. 700 mm in length, with checker plate covering and a perforated strip at the end for hooking on aluminum drive-up ramps * Semi-trailer platform with 50 mm clamped wooden planks; low-bed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 mechanical folding extensions to a total width of 3 m, not in the rear bevel (extension planks available with enclosed transverse storage compartment under the loading area) * 3 storage compartments under the semi-trailer platform for optional storage of aluminum ramps or planks for covering wheel recesses ----Load Securing (LaSi package): Semi-trailer platform: * Perforated outer frame angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the semi-trailer platform, 1 on the longitudinal member after the step-down, and 1 above the center axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings per side on the outer frame (1 at the start of the step-down, 1 at the start of the ramp, 1 at the end of the ramp) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel recesses (2 on the front, 1 on the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, running from the end of the last rigid axle over the steering axle to the rear cross member, continuous, with internal reinforcement profile, approx. width 770 mm, rear depth 270 / front depth 170 mm * 2 x

Durumu: kullanılmış, Üretim yılı: 2017, çalışma saatleri: 13.000 h,