Üç yöne devirmeli römorkMÜLLER-MITTELTAL
14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
Üç yöne devirmeli römork
MÜLLER-MITTELTAL
14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
sabit fiyat KDV hariç
€28.500
(€33.915 brüt)
Üretim yılı
2026
Durumu
Yeni
Konum
Egestorf 

Resimleri göster
Haritayı göster
Temel veriler
Fiyat ve Konum
sabit fiyat KDV hariç
€28.500
(€33.915 brüt)
- Satıcının konumu:
- Eichenstich 12, 21272 Egestorf, Almanya

Ara
Teknik detaylar
- Azami yük ağırlığı:
- 10.900 kg
- Toplam ağırlık:
- 14.400 kg
- Dingil konfigürasyonu:
- 2 dingil
- Yükleme alanı uzunluğu:
- 5.000 mm
- Yükleme alanı genişliği:
- 2.420 mm
- Yükleme alanı yüksekliği:
- 500 mm
Teklif detayları
- Listeleme kimliği:
- A186-22-416
- Referans no.:
- 5776 a
- Son güncelleme tarihi:
- 24.10.2025
Açıklama
* Wabco EBS (Electronic Braking System)
* RDÜ (Tyre Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Parabolic springs with tandem equalizer assembly
* Height-adjustable (approx. 300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye
* Jost mechanical landing gear at the front
* Two mechanical, hot-dip galvanized foldable props at the rear
* 15-pin electrical connector
* LED tail lights
* Hot-dip galvanized bolted underrun protection
* Toolbox made of galvanized sheet steel on the right side
* Plastic quarter mudguards
* Hot-dip galvanized chassis
* Steel pallet – three-way tipper body
* Continuous side walls on top with internal tube reinforcement – foldable, without central stanchions, with drop side spring lifting assist
Hodpfxsv El Tuj Afzjfr
* Rear tailgate foldable and swinging, with manual central locking
* Hot-dip galvanized, bolted tail stanchions
* Each corner has one 5 t lashing point, and each side has four 3 t recessed lashing rings in the outer frame
* 4 mm fine-grain steel floor plate
* Net hooks, mounting rail at the rear for loading ramps
* Prepared for later retrofitting of side wall extensions
* Structure reinforced with load securing certificate according to EN 12642 XL
* Two-step entry on the left side as access aid
* One pair of aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment at the rear below the loading platform, integrated into the chassis
* Axles, springs, air tanks, and landing gear painted black
* Chassis, drawbar, floor, front wall, folding supports hot-dip galvanized
* New vehicle, not yet registered, with manufacturer’s warranty
* Tyres: 385/55 R 22.5
* Body panels painted to RAL 9010 pure white
* Painting of side panels in any RAL color available at extra cost
* Subject to errors and prior sale
* Available from CW (calendar week)
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
* RDÜ (Tyre Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Parabolic springs with tandem equalizer assembly
* Height-adjustable (approx. 300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye
* Jost mechanical landing gear at the front
* Two mechanical, hot-dip galvanized foldable props at the rear
* 15-pin electrical connector
* LED tail lights
* Hot-dip galvanized bolted underrun protection
* Toolbox made of galvanized sheet steel on the right side
* Plastic quarter mudguards
* Hot-dip galvanized chassis
* Steel pallet – three-way tipper body
* Continuous side walls on top with internal tube reinforcement – foldable, without central stanchions, with drop side spring lifting assist
Hodpfxsv El Tuj Afzjfr
* Rear tailgate foldable and swinging, with manual central locking
* Hot-dip galvanized, bolted tail stanchions
* Each corner has one 5 t lashing point, and each side has four 3 t recessed lashing rings in the outer frame
* 4 mm fine-grain steel floor plate
* Net hooks, mounting rail at the rear for loading ramps
* Prepared for later retrofitting of side wall extensions
* Structure reinforced with load securing certificate according to EN 12642 XL
* Two-step entry on the left side as access aid
* One pair of aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment at the rear below the loading platform, integrated into the chassis
* Axles, springs, air tanks, and landing gear painted black
* Chassis, drawbar, floor, front wall, folding supports hot-dip galvanized
* New vehicle, not yet registered, with manufacturer’s warranty
* Tyres: 385/55 R 22.5
* Body panels painted to RAL 9010 pure white
* Painting of side panels in any RAL color available at extra cost
* Subject to errors and prior sale
* Available from CW (calendar week)
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2001
İstek gönder
Telefon & Faks
+49 40 33... ilanlar
Bu ilanlar da ilginizi çekebilir.
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
MÜLLER-MITTELTAL14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
Küçük ilan
Nowy Sacz
1.656 km
Damperli kamyon
MERCEDES-BENZUNIMOG 400 * KIPPER 2,40 * 4x4 * TOPZUSTAND
MERCEDES-BENZUNIMOG 400 * KIPPER 2,40 * 4x4 * TOPZUSTAND
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
MÜLLER-MITTELTAL14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
Küçük ilan
Gaubitsch
1.852 km
Süpürge kamyonu
UnimogUnimog U400 + TRILETY Kehrmaschine/TÜV
UnimogUnimog U400 + TRILETY Kehrmaschine/TÜV
İlanınız başarıyla silindi
Bir hata oluştu









































































































