Vinç kamyonu

Scania R730 R 730 V8 6x2 Palfinger PK 18502-SH E

Koşul: yeni, boş ağırlık: 17.500 kg, azami yük ağırlığı: 43.500 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 400 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and removable - For tractor units: 6x4 or 8x4 Lowbed: - Lowbed with external beams, extendable version, “SUPER LOW” design, length approx. 7,550 mm - Lowbed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking - Supply lines routed protected inside the extendable beams and automatically adjust to the respective lowbed length Rear running gear: - Rear running gear with closed outer frame, chequer plate covering, and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at rear - 2 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame Axles and tyres: - “PENDLE-AXLE”, all axles forced-steered by hydromechanics - Burst protection valve on axle compensation cylinder with automatic RESET feature - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - 245/70 R 17.5 tyres / 3PMSF Accessories included: - Prepared for mounting attachable container positions for 1x 20ft or 1x 40ft container on the outer beams - 2'' king pin - One galvanized steel front wall approx. 400 mm high - One spare wheel with bracket - At the galvanized front connection strip: yellow-red air couplings - 4 wheel chocks - Remote steering from front and rear by cable remote control with push buttons, including track alignment monitoring for the axles - Hydraulic couplings from gooseneck to lowbed with multi-coupling system instead of screw couplings - Electro-hydraulic unit - White reflector tape according to EU regulations on the sides, extension, and red at the rear - 2 wooden blocks 500x250x200 mm - European reflector plates (red-yellow) at the rear of the trailer - On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket - Central lubrication system with 2 BEKAMAX (Pico) pumps for NLGI-2 standard grease - Load pressure gauge to determine axle loads, including load chart - On the gooseneck, plug-in ALU side and rear walls approx. 2,000 x 400 mm - The rear galvanized plug-in posts are removable (body length approx. 2,120 mm) - Separate air connection with air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Gooseneck closed at the rear upper section with a removable cover - 1 pair of steel ramps to bridge the mountings of the lowbed - Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for the steering in addition to the cable remote, with indicator lights on receiver for track monitoring - 6 pairs of threaded blocks between lashing rings under the top chord on the outer beam for mounting screwable RUD rings VLBG-4 - 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform - Folding extensions, approx. 230 mm per side - Anti-slip sand layer painted on the loading platform - Dipper recess on the rear running gear closed at the front and rear with plug-in plates - HRM metallization (High Resistance Metallisation) of the outer frame Dujdpfx Aeh Hm Thsddst - Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (Zinc 85% - Alu 15%)

Koşul: ikinci el, kilometre: 360.000 km, güç: 390 kW (530,25 bg), ilk tescil: 05/2020, yakıt türü: dizel, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 3 dingil, frenler: retarder, renk: mavi, vites türü: otomatik, emisyon sınıfı: Euro 6, Üretim yılı: 2020, Donanım: ABS, elektronik denge programı (ESP), klima, navigasyon sistemi, park ısıtıcısı, vinç, DAF XF 530 6X2 Lift/direksiyonlu, tamamen havalı süspansiyonlu, platform kasalı vinçli Tam donanımlı Dingil mesafesi: 4800 mm Yükleme alanı: 6200 mm Toplam uzunluk: 9900 mm Vinç: Palfinger PK 23002-SH Sonsuz döner 6+1, toplam 19 m, 740 kg, uzaktan kumanda, hızlı bağlantılı hortum paketi, palet çatallı (1100 saat) Durum: Üst seviyede ve tam donanımlı Duedpfxox Sbz Te Addst Römork da mevcut, şu anda iki seçenek: Jumbo veya Standart

Koşul: ikinci el, kilometre: 67.313 km, güç: 325 kW (441,88 bg), ilk tescil: 02/2019, yakıt türü: dizel, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 3 dingil, bir sonraki muayene (TÜV): 10/2026, renk: beyaz, vites türü: otomatik, emisyon sınıfı: Euro 6, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Donanım: ABS, is filtrasyon filtresi, klima, navigasyon sistemi, vinç, MAN 26.320 TGM + Böcker çatı ustası vinci AK46/6000 6x2 Süspansiyon: Yaprak-havalı Dingil mesafesi: 4,50 m Yük kapasitesi: 5.320 kg Böcker vinç Tip: AK46/6000 Yıl: 2019 5x hidrolik açılır bom 4x hidrolik destek noktası 1x uzaktan kumanda + Halatlı vinç + Aksesuarlar Donanım: - Motor freni - Dijital takograf - 3 kişilik kabin Dsdpfx Adox Hbxuedout - Geri görüş kamerası - Radyo-Medya-Navigasyon-Bluetooth-AUX - Şerit takip asistanı - Kaldırma + Direksiyon aksı - Elektrikli camlar Finansman/leasing konusunda da iş ortaklarımızla size memnuniyetle destek olabiliriz. Tüm bilgiler garanti verilmeden sunulmuştur. Hatalar ve ara satışlar saklıdır.

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, BERTOJA SEMI-TRAILER 13.80m Djdoxpi A Rjpfx Addsut BRAND NEW, READY FOR REGISTRATION Double galvanized hydraulic ramp Raised edge on gooseneck Winch pre-equipment Self-steering axle CONTACTS: 0823 1686306 335 6713062 OFFICE OPENING HOURS: MONDAY-FRIDAY 8:30 AM / 7:00 PM - SATURDAY 8:30 AM / 2:00 PM WE OFFER A LARGE SELECTION OF USED MULTI-BRAND COMMERCIAL AND INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man – Nissan V8 – Intarder-770s – Limited Edition – 660 S Semitrailer – Refrigerated Tanker Semi-Trailer – Lamberet – Schmitz – Isuzu – Fixed Flatbed – Crane – Tipper – 4 Axles – Rear Four Axles – Tway-T-Way-540-460 HP – Xway-X-Way-Trilateral – V8 – Scania – Frost Edition Curtain Side – Box – Tail-lift Box – Refrigerated Cell – Insulated with Fridge – Van Domenico Truck srl declines all responsibility for any discrepancies regarding equipment, optional extras, and vehicle features, which may in some cases differ from those stated in the description. We invite you to verify the specifications of each specific vehicle.

Koşul: iyi (kullanılmış), kilometre: 500.142 km, güç: 338 kW (459,55 bg), ilk tescil: 04/2014, yakıt türü: dizel, dingil konfigürasyonu: 6x4, dingil mesafesi: 5.600 mm, yakıt: dizel, frenler: motor freni, renk: kırmızı, şoför kabini: yataklı kabin, vites türü: otomatik, vites sayısı: 12, emisyon sınıfı: Euro 5, süspansiyon: çelik, yükleme alanı uzunluğu: 6.300 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 1.000 mm, Üretim yılı: 2014, Donanım: ABS, diferansiyel kilidi, elektrikli ayna, elektrikli cam sistemi, hız sabitleyici, klima, merkezi kilitleme, park ısıtıcısı, tır çekici bağlantısı, vinç, = Additional Options and Accessories = - Aluminum fuel tank - Leaf suspension - Brake booster - Remote central locking - Speed limiter - Sleeper cabin - Sun visor - Auxiliary heater / parking heater - Toolbox - Power take-off (PTO) - Towing hitch = Notes = Volvo FH 460 6x4 platform with aluminum side boards, 6x4 sleeper cabin, steel suspension, trailer coupling, hub reduction, Fassi F 455-6, ONLY 2712 WORKING HOURS, remote control, 4-point outriggers, 6 hydraulic extensions and rotator, tires 80%. Truck is in good condition. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Suspension: leaf spring Front axle: steered; Tire tread left: 80%; Tire tread right: 80% Rear axle 1: twin tires; differential lock; Tire tread left inside: 80%; Tire tread left outside: 80%; Tire tread right inside: 80%; Tire tread right outside: 80%; Reduction: outer planetary axles Rear axle 2: twin tires; differential lock; Tire tread left inside: 80%; Tire tread left outside: 80%; Tire tread right inside: 80%; Tire tread right outside: 80%; Reduction: outer planetary axles Weights Unladen weight: 20,760 kg Dujdpfx Adswwtlnedot Payload: 5,240 kg gross vehicle weight: 26,000 kg Functionality Lifting capacity: 13,500 kg Lifting height: 1,655 cm Crane: Fassi F 455, mounted at rear of chassis Superstructure brand: Hydromat Condition Technical condition: good Optical condition: good

Koşul: ikinci el, kilometre: 456.492 km, güç: 125 kW (169,95 bg), ilk tescil: 05/2000, yakıt türü: dizel, toplam ağırlık: 7.490 kg, renk: yeşil, vites türü: mekanik, koltuk sayısı: 2, Donanım: vinç, * Remote control * 28-meter conveying height Dusdpfjr A Adcjx Addjt * Max. load capacity: 500 kg * Klaas superstructure * Hatz diesel engine

Koşul: ikinci el, kilometre: 129.754 km, güç: 368 kW (500,34 bg), ilk tescil: 07/2023, yakıt türü: dizel, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 3 dingil, bir sonraki muayene (TÜV): 05/2028, frenler: retarder, renk: mavi, vites türü: otomatik, emisyon sınıfı: Euro 6, Üretim yılı: 2023, Donanım: ABS, klima, vinç, Internal vehicle number: VTC30026 German vehicle Available immediately at our yard in Kaufungen - Kassel, Germany More INFO from: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Platform dimensions [mm]: 6400 x 2550 Palfinger PK53002 SH 1159 operating hours 4m – 10,800kg 6m – 7,600kg 8m – 5,700kg 10m – 4,450kg 12m – 3,650kg 14.5m – 3,050kg ELBO PCS trailer (included in the vehicle price) €17,900 Ref. No.: VTC30018 Year of manufacture: 2023 Current weight: 4,650 kg Permissible payload: 13,350 kg Djdpfoyrv Tcsx Addeut Overall dimensions: 8,250 x 2,550 mm Loading platform dimensions: 6,400 x 2,550 mm Tyres: 235/75 R17.5 Suspension: air suspension Brakes: drum brakes Hydraulic ramps Errors excepted We are happy to consider your used vehicle as part of the payment. Financing available directly from us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----.

Koşul: yeni, boş ağırlık: 10.700 kg, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r 17,5, renk: gri-siyah, Donanım: ABS, Gooseneck: • Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood floor Extendable loading platform: • Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° • Cut-outs in the outer frame of the loading platform for securing straps • Approx. 48 mm thick hardwood covering, checker plate covering over the axles Two-part steel ramps: • One pair of galvanized, two-part steel ramps with approx. 48 mm thick hardwood covering • Ramp sections fold in and out hydraulically, with hydraulic lifting system and hydraulic lateral adjustment • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reversing lock, activation via reverse gear and manual operation • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Painting: Djdpshlz S Nefx Addeut • First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer • High-quality 2-component top coat, single color in MB 7350 Novagrey • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lift capacity (50t test load) Steel construction: • Steel construction made of high-strength fine grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system according to EU requirements, 24 Volt lighting • ASPÖCK UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets Included accessories: • One spare wheel with holder • One galvanized steel headboard approx. 400 mm high • Yellow-red air couplings on the galvanized connection panel at the front • 4 wheel chocks • Bracket for rotating beacon at the rear of the trailer • Holder at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the rear chamfer of the loading platform • Cover plates for bridging the gap between ramps and loading platform • White reflector tape to EU specifications on the sides, extension, and red at rear • Electro-hydraulic unit mounted at the rear, under the loading platform • On both sides of the gooseneck and ramps, holders for warning panels with socket • Control valves for the ramps mounted on the right trailer side • ALU sideboards and tailboard on the gooseneck approx. 2,440 x 400 mm • Rear, galvanized removable stakes (body length approx. 2,560 mm) • Four approx. 400 mm extendable warning boards with position light • 3 pairs of WADER container locks in deck for 20ft, 30ft, or 40ft container • 6 pairs of stake pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the rear chamfer of the loading platform • Anti-slip sand coating on checker plate surfaces above kingpin and loading platform • Load pressure gauge for axle load measurement including load chart • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) and hot finished.

Koşul: yeni, azami yük ağırlığı: 44.000 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, Further information here: Dujdpfev D Abtjx Addot

Koşul: ikinci el, kilometre: 65.221 km, güç: 97 kW (131,88 bg), ilk tescil: 06/1994, yakıt türü: dizel, toplam ağırlık: 7.490 kg, vites türü: mekanik, Donanım: vinç, * 814 Roofer crane * Superstructure: Klaas 28-07 * Operating hours: 4,601 * With remote control * With work platform * Hatz diesel engine for crane operation Dodsuffpdspfx Addeut * Maximum height: 28 meters * Differential lock * 6-cylinder engine * Rear left outrigger ram leaking