Standart çekici ünitesi

MAN TGS 18.500 4x2 + SCHWARZMÜLLER KIPPER

Koşul: yeni, boş ağırlık: 17.500 kg, azami yük ağırlığı: 43.500 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 400 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and removable - For tractor units: 6x4 or 8x4 Lowbed: - Lowbed with external beams, extendable version, “SUPER LOW” design, length approx. 7,550 mm - Lowbed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking - Supply lines routed protected inside the extendable beams and automatically adjust to the respective lowbed length Rear running gear: - Rear running gear with closed outer frame, chequer plate covering, and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at rear - 2 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame Axles and tyres: - “PENDLE-AXLE”, all axles forced-steered by hydromechanics - Burst protection valve on axle compensation cylinder with automatic RESET feature - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - 245/70 R 17.5 tyres / 3PMSF Accessories included: - Prepared for mounting attachable container positions for 1x 20ft or 1x 40ft container on the outer beams - 2'' king pin - One galvanized steel front wall approx. 400 mm high - One spare wheel with bracket - At the galvanized front connection strip: yellow-red air couplings - 4 wheel chocks - Remote steering from front and rear by cable remote control with push buttons, including track alignment monitoring for the axles - Hydraulic couplings from gooseneck to lowbed with multi-coupling system instead of screw couplings - Electro-hydraulic unit - White reflector tape according to EU regulations on the sides, extension, and red at the rear - 2 wooden blocks 500x250x200 mm - European reflector plates (red-yellow) at the rear of the trailer - On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket - Central lubrication system with 2 BEKAMAX (Pico) pumps for NLGI-2 standard grease - Load pressure gauge to determine axle loads, including load chart - On the gooseneck, plug-in ALU side and rear walls approx. 2,000 x 400 mm - The rear galvanized plug-in posts are removable (body length approx. 2,120 mm) - Separate air connection with air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Gooseneck closed at the rear upper section with a removable cover - 1 pair of steel ramps to bridge the mountings of the lowbed - Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for the steering in addition to the cable remote, with indicator lights on receiver for track monitoring - 6 pairs of threaded blocks between lashing rings under the top chord on the outer beam for mounting screwable RUD rings VLBG-4 Codpjh Hm Thefx Aldegt - 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform - Folding extensions, approx. 230 mm per side - Anti-slip sand layer painted on the loading platform - Dipper recess on the rear running gear closed at the front and rear with plug-in plates - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (Zinc 85% - Alu 15%)

Koşul: ikinci el, kilometre: 360.000 km, güç: 390 kW (530,25 bg), ilk tescil: 05/2020, yakıt türü: dizel, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 3 dingil, frenler: retarder, renk: mavi, vites türü: otomatik, emisyon sınıfı: Euro 6, Üretim yılı: 2020, Donanım: ABS, elektronik denge programı (ESP), klima, navigasyon sistemi, park ısıtıcısı, vinç, DAF XF 530 6X2 Lift/direksiyonlu, tamamen havalı süspansiyonlu, platform kasalı vinçli Tam donanımlı Dingil mesafesi: 4800 mm Yükleme alanı: 6200 mm Cgodpox Sbz Tjfx Aldjt Toplam uzunluk: 9900 mm Vinç: Palfinger PK 23002-SH Sonsuz döner 6+1, toplam 19 m, 740 kg, uzaktan kumanda, hızlı bağlantılı hortum paketi, palet çatallı (1100 saat) Durum: Üst seviyede ve tam donanımlı Römork da mevcut, şu anda iki seçenek: Jumbo veya Standart

Koşul: mükemmel (kullanılmış), kilometre: 38.274 km, güç: 177 kW (240,65 bg), yakıt türü: dizel, dingil konfigürasyonu: 4x4, dingil mesafesi: 4.150 mm, yakıt: dizel, renk: diğer, vites türü: mekanik, vites sayısı: 6, süspansiyon: çelik, koltuk sayısı: 3, toplam uzunluk: 8.050 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 3.070 mm, Üretim yılı: 2007, Donanım: tır çekici bağlantısı, = Additional options and accessories = - Fixed trailer coupling = Remarks = The used Iveco Eurocargo 140E24 4X4 from 2007 is a robust truck, ideal for transport tasks in demanding terrain. With a mileage of 38,274 km, the proven Iveco F4AE0681B engine with 5,880 cm³ delivers reliable 240 hp, paired with a 6-speed manual transmission. The 4x4 drive system with locks on the front, center, and rear axles ensures optimal traction. With a wheelbase of 415 cm and large Michelin XZL tires in size 395/85R20, this truck is well equipped for rough surfaces. The spacious full cab offers seating for three passengers and an integrated bed, complemented by air conditioning for comfort on long journeys. The cargo area length of 535 cm allows for the transport of larger goods. This truck is a reliable option for companies seeking a rugged off-road solution without sacrificing comfort features such as a well-equipped cab. Take advantage of this opportunity to acquire a versatile and powerful machine built for tough jobs. = Further information = Cab type: double Suspension: leaf spring Cedpfx Aljx H Tkisdogt Number of cylinders: 6 Engine capacity: 5,880 cc Unladen weight: 7,730 kg GVW: 7,730 kg Engine type: Iveco F4AE0681B Number of beds: 1 Damages: none

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, BERTOJA SEMI-TRAILER 13.80m BRAND NEW, READY FOR REGISTRATION Cjdsxpi A Rspfx Aldegt Double galvanized hydraulic ramp Raised edge on gooseneck Winch pre-equipment Self-steering axle CONTACTS: 0823 1686306 335 6713062 OFFICE OPENING HOURS: MONDAY-FRIDAY 8:30 AM / 7:00 PM - SATURDAY 8:30 AM / 2:00 PM WE OFFER A LARGE SELECTION OF USED MULTI-BRAND COMMERCIAL AND INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man – Nissan V8 – Intarder-770s – Limited Edition – 660 S Semitrailer – Refrigerated Tanker Semi-Trailer – Lamberet – Schmitz – Isuzu – Fixed Flatbed – Crane – Tipper – 4 Axles – Rear Four Axles – Tway-T-Way-540-460 HP – Xway-X-Way-Trilateral – V8 – Scania – Frost Edition Curtain Side – Box – Tail-lift Box – Refrigerated Cell – Insulated with Fridge – Van Domenico Truck srl declines all responsibility for any discrepancies regarding equipment, optional extras, and vehicle features, which may in some cases differ from those stated in the description. We invite you to verify the specifications of each specific vehicle.

Koşul: yeni, boş ağırlık: 10.700 kg, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r 17,5, renk: gri-siyah, Donanım: ABS, Gooseneck: • Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood floor Extendable loading platform: • Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° • Cut-outs in the outer frame of the loading platform for securing straps • Approx. 48 mm thick hardwood covering, checker plate covering over the axles Two-part steel ramps: • One pair of galvanized, two-part steel ramps with approx. 48 mm thick hardwood covering • Ramp sections fold in and out hydraulically, with hydraulic lifting system and hydraulic lateral adjustment • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reversing lock, activation via reverse gear and manual operation • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Painting: • First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer • High-quality 2-component top coat, single color in MB 7350 Novagrey • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lift capacity (50t test load) Steel construction: • Steel construction made of high-strength fine grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Csdpjhlz S Nefx Aldjgt Electrical system: • Electrical system according to EU requirements, 24 Volt lighting • ASPÖCK UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets Included accessories: • One spare wheel with holder • One galvanized steel headboard approx. 400 mm high • Yellow-red air couplings on the galvanized connection panel at the front • 4 wheel chocks • Bracket for rotating beacon at the rear of the trailer • Holder at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the rear chamfer of the loading platform • Cover plates for bridging the gap between ramps and loading platform • White reflector tape to EU specifications on the sides, extension, and red at rear • Electro-hydraulic unit mounted at the rear, under the loading platform • On both sides of the gooseneck and ramps, holders for warning panels with socket • Control valves for the ramps mounted on the right trailer side • ALU sideboards and tailboard on the gooseneck approx. 2,440 x 400 mm • Rear, galvanized removable stakes (body length approx. 2,560 mm) • Four approx. 400 mm extendable warning boards with position light • 3 pairs of WADER container locks in deck for 20ft, 30ft, or 40ft container • 6 pairs of stake pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the rear chamfer of the loading platform • Anti-slip sand coating on checker plate surfaces above kingpin and loading platform • Load pressure gauge for axle load measurement including load chart • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) and hot finished.

Koşul: yeni, boş ağırlık: 10.350 kg, azami yük ağırlığı: 39.150 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - 1 pair of fixed built-in wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses equipped with 15 x 15 mm square climbing strips and lower-section extensions - 1 pair of fixed wheel recesses between the 1st and 2nd axle, approx. 1,610 x 970 x 400 mm - 3-part removable galvanized covers over wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the ramp and extending into the load area to accommodate an excavator bucket arm approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm depression (LC 5,000 daN) Cgjdeiu Er Aepfx Aldot - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece ALU ramps: - One pair of single-piece ALU ramps approx. 2,500 x 600 mm - Ramps with spring assist and manual lateral adjustment - Maximum load per pair: 24,000 kg Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raise/lower valve - Axle tools - Tyres 235/75 R 17.5 - TPMS (Tire Pressure Monitoring System) in compliance with ECE R 141 Accessories included: - One spare wheel with bracket in front of the bulkhead - 2" kingpin - One galvanized steel bulkhead ca. 400 mm high - Yellow-red air couplings at the galvanized front coupling strip - 4 chocks with bracket at the bulkhead - Accommodation at the rear of the gooseneck for ALU approach ramps - Galvanized extensions, extendable approx. 230 mm per side - Galvanized folding supports under the rear incline of the loading area - Bracket for a rotating beacon at the rear of the trailer - White reflector tape in accordance with EU requirements on sides, red on extension and rear - On the gooseneck and rear panel, bracket for warning boards including socket, left and right - On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm - Removable rear galvanized stanchions (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the load area for a 20ft or 30ft container - 3 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area - One removable galvanized intermediate table with 1 pair WADER container pockets - 20 x 20 mm square climbing strips every 200 mm along the outer frame of the loading area's rear incline - Non-slip sand coating painted onto the checker plate on the gooseneck and loading area - Four warning boards extendable by approx. 400 mm each, approx. 423 x 423 mm with position light - Bracket for rotating beacon on warning boards - 80 km/h speed stickers on the rear and both sides - Load gauge for axle load determination including load chart - HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces metallically finished with ZINACOR 850 (Zinc 85% - Alu 15%) hot metalized

Koşul: ikinci el, boş ağırlık: 11.300 kg, azami yük ağırlığı: 29.700 kg, toplam ağırlık: 41.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2006, süspansiyon: hava, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, * German semi-trailer * Special low-bed trailer for transporting commercial vehicles and construction machinery * Manufactured by Estepe, a premium manufacturer from the Netherlands (Estepe type E0PL 24-41) * Years of experience in constructing special low-bed trailers for transporting trucks and construction equipment ensure attention to every detail * Naturally equipped with extendable low-bed, hydraulic ramps, and hydraulic platform * Special winch with remote control, etc. * BPW axles * 3rd axle - lift axle * Air suspension with raise/lower function * Central lubrication system Cgjdportbb Sofx Aldot * Gross vehicle weight (GVW): 41,000 kg * Unladen weight: 11,300 kg * Payload: 29,700 kg If a new TÜV inspection is desired, we are happy to provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that the buyer has an accurate understanding of the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly encouraged. All information provided is without guarantee. We do not accept liability for errors or inaccuracies in this offer. The buyer is responsible for independently verifying the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors. - .

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, Donanım: hidrolik arka platform, DE ANGELIS 3S425 semi-trailer, maximum mass 42,500 kg, 13 tyres, size 245/70R17.5''. Vehicle equipped with: - Hydraulic loading ramps, 4.00m x 0.85m, wood covered (fixed position) - Electro-hydraulic control unit - 1 stainless steel toolbox 600x600x300 mm (ditch side) - Gigant axles - Air suspension - 3rd self-steering axle - Lashing ring kit - 200 mm high aluminium sideboards on the gooseneck POSSIBILITY OF FINANCING OR CUSTOM LEASING AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS IN OUR GROUP: DOMENICO TRUCK SRL NAPLES HEADQUARTERS DOMENICO ESPOSITO S.P.A. EBOLI (SA) – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL & MAXUS Csdpfx Aloydcyyjdegt CONTACTS: 0823 1686306 335 6713062 BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 – SATURDAY 08:30/14:00 WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-trailer - Refrigerated Semi-trailer – Lamberet - Schmitz - Isuzu - Fixed flatbed - Crane - Tipper - 4 axles - 4 Rear Axles - Tway-T-Way-540-460 HP - Xway-X-Way-Three-way tipper - V8 - Scania - Frost Edition Curtain Sider - Box - Boarding platform - Refrigerated Cell - Insulated with fridge - Van Domenico Truck srl declines any responsibility for technical data, optional equipment, and characteristics that may differ from those stated in the description. We kindly ask you to check the specifications of the specific vehicle.

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 1995, kilometre: 753.552 km, güç: 331 kW (450,03 bg), ilk tescil: 05/2016, yakıt türü: dizel, boş ağırlık: 7.665 kg, toplam ağırlık: 19.000 kg, lastik boyutu: 315/70/22.5, dingil konfigürasyonu: 4x2, dingil mesafesi: 3.700 mm, bir sonraki muayene (TÜV): 02/2026, yakıt: dizel, frenler: retarder, renk: beyaz, şoför kabini: yataklı kabin, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: çelik-hava, Üretim yılı: 2016, Donanım: ABS, AdBlue, EBS (Elektronik Fren Sistemi), Takograf, araç içi bilgisayar, buzdolabı, diferansiyel kilidi, düşük ses seviyesi, ek farlar, elektrikli ayna, elektrikli cam sistemi, elektronik denge programı (ESP), hava yastığı, hidrolik direksiyon, hız sabitleyici, is filtrasyon filtresi, klima, koltuk ısıtıcı, merkezi kilitleme, park klima, park ısıtıcısı, retarder, sigara içilmeyen araç, spoiler, çekiş kontrolü, şerit takip asistanı, 1 yataklı ve buzdolaplı Highline kabin, spoiler paketi, park klimasi, şerit değişim asistanı (LDW), acil frenleme asistanı (AEB), 500 litrelik dizel depo, Almanya çıkışlı 1. el araç. Debriyaj yeni. Araç SCANIA onarım ve bakım sözleşmesi kapsamında. Cedsk E Trvepfx Aldsgt Satış sadece ticari işletmelere ve her türlü garanti hariç olmak üzere yapılır. Herhangi bir ALMAN limanına teslimat yapıyoruz.

Koşul: mükemmel (kullanılmış), kilometre: 680.000 km, güç: 537 kW (730,12 bg), ilk tescil: 08/2015, yakıt türü: dizel, dingil konfigürasyonu: 6x2, yakıt: dizel, frenler: retarder, renk: mavi, şoför kabini: yataklı kabin, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: hava, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 10.500 kg, izin verilen aks yükü (aks 3): 8.500 kg, yükleme alanı uzunluğu: 6.350 mm, yükleme alanı genişliği: 2.550 mm, Üretim yılı: 2015, Donanım: ABS, elektrikli ayna, elektrikli cam sistemi, hız sabitleyici, klima, merkezi kilitleme, navigasyon sistemi, park ısıtıcısı, retarder, tır çekici bağlantısı, vinç, = Diğer seçenekler ve donanımlar = - Alüminyum yakıt deposu - Düşük gürültü seviyesi - Intarder - Buzdolabı - Hafif alaşım jantlar - Havalı süspansiyon - Havalı korna - Güneş vizörü - Park ısıtıcısı - Takım kutusu - Xenon aydınlatma - PTO (şaft çıkışı) - Merkezi yağlama - Çeki demiri Csdpfx Ajwtfvwsldjgt = Diğer bilgiler = Aks konfigürasyonu Ön aks maksimum yük kapasitesi: 9.000 kg Arka aks 1: Maksimum aks yükü: 10.500 kg; Süspansiyon: Havalı süspansiyon Arka aks 2: Çift lastik; Kalkar aks; Maksimum aks yükü: 8.500 kg; Süspansiyon: Havalı süspansiyon Ağırlıklar Boş ağırlık: 15.100 kg Yük kapasitesi: 12.900 kg Azami toplam ağırlık: 28.000 kg Fonksiyonel Üst yapı markası: Palfinger PK 18502-SH E CE işareti: evet Durum Teknik durumu: çok iyi Görsel durumu: iyi Kimlik Plaka: 10-BXP-5