Alçak şasi römorkMÜLLER-MITTELTAL
T3 Profi 30,0 Neu, Baggerstiel, Federrampe
Alçak şasi römork
MÜLLER-MITTELTAL
T3 Profi 30,0 Neu, Baggerstiel, Federrampe
sabit fiyat KDV hariç
€42.500
(€50.575 brüt)
Üretim yılı
2026
Durumu
Yeni
Konum
Egestorf 

Resimleri göster
Haritayı göster
Temel veriler
Fiyat ve Konum
sabit fiyat KDV hariç
€42.500
(€50.575 brüt)
- Satıcının konumu:
- Eichenstich 12, 21272 Egestorf, Almanya

Ara
Teknik detaylar
- Azami yük ağırlığı:
- 23.830 kg
- Toplam ağırlık:
- 30.000 kg
- Dingil konfigürasyonu:
- 3 dingil
- Yükleme alanı uzunluğu:
- 8.460 mm
- Yükleme alanı genişliği:
- 2.520 mm
Teklif detayları
- Listeleme kimliği:
- A207-87-217
- Referans no.:
- 6316a
- Son güncelleme tarihi:
- 18.12.2025
Açıklama
* T3 Profile 30,0:
* EBS braking system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical axle equalizer rear
* Side underrun protection
* Pivoting supports at the rear of the chassis frame
* Mechanically adjustable warning boards front and rear
* Front axle: closed plastic mudguards; rear axle: straight, galvanized steel splash guards, each with spray protection
* Reflective contour markings on sides and rear
* Folding (hot-dip galvanized) lid for tool box on the turntable platform
Ibedsx Ipavspfx Aggof
* Multi-voltage system
* LED rear lights
* Removable revolving beacon at rear
* Towing bar with 40 mm towing eye and height adjustment via tension spring & turnbuckle
* 15-pin power connector
* Four stake pockets on each side (stakes not included), with simultaneous lashing option
* Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowering, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t
* 6 pairs of mechanical fold-out supports for 3 m total width (not on rear slope)
* Extension planks stored in center of loading area
* Excavator arm tray over rear axle up to end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm tray)
* Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm)
* Mechanical lateral ramp adjustment
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm approach slope)
* Chassis, turntable, towing bar and ramps hot-dip galvanized
* Axles, springs, air tanks etc. painted black
* 235/75 R 17.5 twin tires
* 5,900 kg empty weight
* -- a gross technical weight of 30,000 kg is possible --
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Available from CW 12/2026
* Sample image
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
* EBS braking system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical axle equalizer rear
* Side underrun protection
* Pivoting supports at the rear of the chassis frame
* Mechanically adjustable warning boards front and rear
* Front axle: closed plastic mudguards; rear axle: straight, galvanized steel splash guards, each with spray protection
* Reflective contour markings on sides and rear
* Folding (hot-dip galvanized) lid for tool box on the turntable platform
Ibedsx Ipavspfx Aggof
* Multi-voltage system
* LED rear lights
* Removable revolving beacon at rear
* Towing bar with 40 mm towing eye and height adjustment via tension spring & turnbuckle
* 15-pin power connector
* Four stake pockets on each side (stakes not included), with simultaneous lashing option
* Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowering, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t
* 6 pairs of mechanical fold-out supports for 3 m total width (not on rear slope)
* Extension planks stored in center of loading area
* Excavator arm tray over rear axle up to end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm tray)
* Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm)
* Mechanical lateral ramp adjustment
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm approach slope)
* Chassis, turntable, towing bar and ramps hot-dip galvanized
* Axles, springs, air tanks etc. painted black
* 235/75 R 17.5 twin tires
* 5,900 kg empty weight
* -- a gross technical weight of 30,000 kg is possible --
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Available from CW 12/2026
* Sample image
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2001
İstek gönder
Telefon & Faks
+49 40 33... ilanlar
Bu ilanlar da ilginizi çekebilir.
İlanınız başarıyla silindi
Bir hata oluştu




