Kullanılmış Müller-Mitteltal T3 Profi 30,0 Neu, Baggerstiel, Federrampe satın al (5.040)

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Side underrun protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front: closed plastic fenders; Rear: straight galvanized steel skirts, both with splash protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi-voltage electrical system * LED tail lights * Removable beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * Four stake pockets on each side (stakes not included), with simultaneous lashing facility * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and recessed in the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slant) * Widening planks stored at the center of the loading area * Excavator arm rest from rear axle to end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the excavator arm rest) * Mechanical one-piece access ramps with spring assistance (approx. 3,000 x 720 mm) * Mechanically adjustable lateral ramp positioning * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, towing bar, and access ramps hot-dip galvanized Bljdpfox Ipa Nsx Ah Sjg * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires * Dead weight 5,900 kg * --Technically possible gross vehicle weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available from Egestorf

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization (rear) * Side underrun protection * Rear swing-down supports on the chassis frame Bledpfxex Ipavo Ah Sjg * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox on the bogie platform * Multi-voltage system * LED rear lights * Detachable rotating beacon (rear) * Towing bar with 40 mm towing eye and height adjustment via return spring & turnbuckle * 15-pin electrical connector * 4 stake pockets per side (stakes not included) with integrated lashing points * Load securing package (La-Si Package) includes: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV lashing rings, pivoting and retractable, loadable in all directions and recessed into the outer frame – in corners 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for 3 m overall width (not at the rear diagonal) * Widening planks stowed in the center of the loading area * Excavator arm trough over rear axle to end crossmember, approx. 2,100 mm long (2 pairs 6.4 t lashing eyes on each side in the excavator arm trough) * Mechanical single-piece access ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment * Load area above turntable: approx. 1,960 x 2,520 mm * Unladen load height: approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Unladen load height: approx. 910 mm (incl. 860 mm approach angle) * Chassis, bogie, towing bar, and ramps hot-dip galvanized * Axles, springs, air reservoir, etc. painted in black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * Technically permissible gross weight of 30,000 kg * Vehicle is hot-dip galvanized * Brand new vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Lateral underrun protection * Rear swivel supports on the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray guards * Reflective contour tape on the sides and rear * Folding lid (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage system * LED rear lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin power connector * Four stake pockets on each side (stakes not included), each with additional lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions, recessed into the outer frame — in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding extensions for a total width of 3 meters (not in the rear bevel) * Widening planks stored in the center of the loading area * Excavator arm rest over rear axle up to the end carrier, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at the sides of the arm rest) * Hydraulically operated one-piece ramp (approx. 3,000 x 720 mm) * Hydraulic ramp lateral displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm approach ramp) * Chassis, turntable, drawbar, and ramps hot-dip galvanized Blsdpfx Ahex Ipbgo Ssg * Axles, springs, air tanks, etc. painted in black finish * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically permitted gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately ex works Egestorf on the A7

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Side underrun protection Blodpex Ipb Hofx Ah Sjg * Swing-down supports at rear of chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with splash guards * Contour marking tape on sides and rear, reflective * Folding lid (hot-dip galvanized) for tool box on the bogie platform * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle * 15-pin electric plug * Four stake pockets on each side (no stakes present), can also be used for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of swiveling and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame; in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not on rear chamfer) * Widening planks stored in the middle of the loading area * Excavator arm storage above rear axle up to the rear cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the excavator arm storage) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable lateral ramp shift * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible total weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Immediately available ex Egestorf on the A7

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Swing-down supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle with closed plastic mudguards; rear axle with straight, galvanized steel skirts, each equipped with spray protection * Contour tape on the sides and rear, reflective * Foldable lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin power connector * Four stake pockets on each side (no stakes included) with lashing points * Cargo securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, pivotable and recessed, loadable in all directions and integrated into the outer frame – 13.4 t load capacity in the corners, otherwise 10 t * Six pairs of mechanical folding outriggers for a total width of 3 m (not on the rear slope) * Extension planks stored in the center of the loading bed * Excavator boom support over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side in the excavator boom support) * One-piece hydraulic loading ramps (approx. 3,000 x 720 mm) * Four-section control block for future retrofitting of hydraulic ramp shift * Mechanical lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- Gross weight of 30,000 kg technically possible -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale Blsdpfx Ahel Thxde Sjg * Available from calendar week 18/2026

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underride protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirting with splash guards * Reflective contour tape on the sides and rear * Folding lid (hot-dip galvanized) for toolbox on the bogie platform * Multi-voltage system Bodpfx Aol Th Adoh Sslg * LED taillights * Detachable beacon at the rear * Towing scissors with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin power connector * Four stake pockets per side (stakes not included), also usable as lashing points * Load Securing Package including: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV lashing rings, foldable and lowerable, loadable in all directions and recessed into the outer frame – corners rated at 13.4 t, others 10 t * 6 pairs of mechanical folding outriggers for a total width of 3 m (not in the rear taper) * Widening planks stowed in the center of the loading area * Excavator arm rest above rear axle to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the excavator arm rest) * One-piece hydraulic ramps (approx. 3,000 x 720 mm) * 4-section control block for future retrofitting of hydraulic ramp shifting * Mechanical lateral ramp shifting * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen load height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen load height: approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, towing scissors, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically permissible gross weight: 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from CW 18/2026

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, Üretim yılı: 2016, T3 Profile 30, 0: Drum brakes, 3 x 10 ton axles, side underrun protection, swiveling support legs at the rear of the chassis frame, mechanically adjustable warning sign packages at the front and rear, folding lid for the toolbox on the turntable platform, 4 lashing rings on each side, 6 pairs of mechanical folding extensions for a total width of 3 m, widening planks stored in the center of the loading area, hydraulically operated 2-piece loading ramps laterally adjustable, loading area above the turntable: approx. 2,000 x 2,520 mm, loading height approx. 1,070 mm; rear loading area: approx. 6,500 x 2,520 / 3,000 mm, loading height approx. 910 mm (including 860 mm approach ramp), permissible gross weight technically possible: 30,000 kg, vehicle is hot-dip galvanized and as new. = Additional Information = Weights Payload: 24,000 kg gross vehicle weight: 6,000 kg Maintenance, History, and Condition Number of owners: 1 Technical condition: very good Visual condition: very good Further Information Tyre condition front: 90% Tyre condition rear: 90% Bledpfxoyz Ix Re Ah Ssg Tyres front: 235/75 R 17.5 Tyres rear: 235/75 R 17.5 Cargo space dimensions (LxWxH): 8500 x 3000 x 3000 Country of manufacture: DE Further Information Please contact Bernd Strack for more information.

Koşul: ikinci el, azami yük ağırlığı: 17.290 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2017, bir sonraki muayene (TÜV): 07/2026, yükleme alanı uzunluğu: 8.900 mm, yükleme alanı genişliği: 2.520 mm, Donanım: ABS, * ABS * 5-odalı arka farlar * Turuncu döner uyarı lambası Bodpfxjyulu Us Ah Selg * Duomatik hava bağlantısı * BPW-ECO akslar ----Üst yapı: Alçak şasi römork, galvanizli şasi (1900+7000mm)/yaklaşık 900mm yükleme yüksekliği, arka kısmı eğimli/yaklaşık 770mm rampa yüksekliği, çelik/ahşap zemin, 3 metreye kadar genişletilebilir, kaymaz kaplamalı hidrolik katlanır rampalar (galvanizli), hidrolik olarak yana kaydırılabilir, sabitleme halkaları Satış yalnızca ticari işletmelere yapılmaktadır. İHRACATTA SADECE NET FİYAT ÖDENİR!!!!! TÜM BİLGİLER EKİPMAN VE AKSESUARLAR İÇİN GARANTİSİZ VERİLMİŞTİR. Tüm satın alma sözleşmeleri, faturalar, proforma faturalar, siparişler ve satış görüşmelerinin temeli genel şartlarımızdır (ayrıntılar için künyeye bakınız).

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 92.300 mm, yükleme alanı genişliği: 24.900 mm, yükleme alanı yüksekliği: 30.200 mm, Üretim yılı: 2018, Donanım: ABS, = Further options and accessories = - EBS - Electronic braking system - Air suspension rear - Air suspension front = Notes = For inquiries about the vehicle, Mr. Seidel will be happy to assist you (by phone). Müller-Mitteltal TS 3 PROFI 30.0 Machine Transporter Additional rear lights, left and right sides, BPW axles, Wabco ABS, drum brakes, spring brakes, 3rd axle steering, hydraulic loading ramp, side-sliding rear stakes, sliding roof, sliding side tarpaulin, permissible total weight: 36,000 kg (technical 42,000 kg), unladen weight: 11,100 kg, payload: 24,900 kg (technical 30,900 kg). Loading area dimensions: rear to step: L 9,230 mm W 2,490 mm H 3,020 mm; step to bulkhead: L 4,000 mm H 2,470 mm; tyre tread: 1st axle 7-11 mm, 2nd axle 9-10 mm, 3rd axle 8-10 mm. On request, we can provide you with a leasing or financing offer. Mr. Seidel (phone) will be happy to assist you. You can find further information on our homepage. Bledpfxjyxkluj Ah Sog ... Errors, changes, and prior sale reserved! Steering axle = Further information = Unladen weight: 11,100 kg Payload: 24,900 kg gross vehicle weight: 36,000 kg Please contact Tobias Ebert for further information.

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, Donanım: ABS, * T 3: * ABS braking system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic leaf springs * Mechanical axle equalization at the rear * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front & rear * Front: closed plastic mudguards; rear: straight galvanized steel skirts, each with spray protection * Reflective contour tape on the sides and rear * Foldable (hot-dip galvanized) cover for the toolbox on the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm - powder-coated in black - mounted on the side under the chassis * 15-pin electrical connector * LED lighting 12 / 24 V * Removable LED beacon at the rear Bjdpfx Ahoq Dyv Io Solg * Drawbar with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 4 stake pockets on each side (stakes not included) with simultaneous lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform * 5 pairs of UVV folding and lowering lashing rings * Loadable in all directions, recessed into the external frame at the corners (13.4 t), otherwise 10 t * 6 pairs of mechanical folding outriggers for a total width of 3 m (not at rear chamfer) * Extension planks stored in a compartment under the loading area * Excavator arm rest over the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable ramp tip and load holding valves, hydraulic lateral ramp shift * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity over 40 ltr. up to max. 140 ltr./min.), dual-line hydraulic system * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded deck height approx. 860 mm +/- 30 mm compensation unit * Chassis, bogie, folding outriggers, drop-down rear supports and ramps hot-dip galvanized * Axles, springs, drawbar, air tanks etc. painted in black * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 19/2026

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, Donanım: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at rear * Side underrun protection * Pivoting supports at the rear of the chassis frame * Mechanically adjustable warning panel sets at front & rear * Front axle: closed plastic fenders; rear axle: straight, galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Hinged (hot-dip galvanized) cover for toolbox on the turntable platform * Toolbox made of galvanized steel, approx. 650 x 300 x 600 mm, powder-coated black, mounted laterally under the chassis * 15-pin electrical connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 4 stake pockets per side (no stakes included), doubles as lashing points * Load securing package including: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swiveling and retractable * Loadable in all directions, integrated in outer frame corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for overall width of 3 m (not at rear slope) * Extension planks for platform width stored in a storage compartment under loading area * Digger arm cradle above rear axle up to rear crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings per side in the cradle) * Hydraulically operated folding ramps (approx. 4,650 x 720 mm) with hydraulic movable tip and load holding valves, hydraulically adjustable ramp lateral shift * Hydraulic flow divider in trailer (for truck hydraulic pump performance over 40 l up to max. 140 l/min), dual-circuit hydraulics * Loading area above turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm drive-up slope) * Loaded platform height approx. 860 mm +/- 30 mm with compensation unit Bledpfx Astplwfjh Seg * Chassis, turntable, folding outriggers, drop supports at rear, and loading ramps hot-dip galvanized * Axles, springs, drawbar, air tanks, etc., painted black * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 19/2026

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, süspansiyon: parabolik yaprak (yay), lastik boyutu: 235-75R17.5, Üretim yılı: 2010, 3 dingilli alçak şasi römork, arkadan yüklenebilir. Azami toplam ağırlık 30.000 kg, taşıma kapasitesi 22.700 kg. Yükleme alanı 8.900 mm (7.000 + 1.900) x 2.550 mm, aşırı genişlik için ikaz paketi, 12 yük bağlama halkası ile 8 dikme cebi, aynı zamanda bağlama imkanı, 6 adet alet kutusu. İki parçalı hidrolik rampalar yaklaşık 2.100+2.000 x 800 mm ve kauçuk kaplamalı, hidrolik arka destek. BPW akslar, EBS, dengeleme ünitesine sahip parabolik süspansiyon, lastik ölçüsü 235-75 R 17.5. Kavisli çekme kolu, döner çekme gözü 40+50 mm. 2 hatlı hava (Duomatik), 2 hatlı hidrolik, 24 volt. Boşken yükseklik yaklaşık 910 mm. Turuncu boyalı. Muayenesi 03-2027'ye kadar geçerli. = Ek Bilgiler = Lastik ölçüsü: 235-75R17.5 Süspansiyon: Parabolik süspansiyon Boş ağırlık: 7.300 kg Yük kapasitesi: 22.700 kg Bljdpfxoy Evvle Ah Sog Azami toplam ağırlık: 30.000 kg Üretim ülkesi: DE Daha fazla bilgi için Jan-Marc Schwickert ile iletişime geçin.

Koşul: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2008, bir sonraki muayene (TÜV): 03/2024, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 910 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: turuncu, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, leaf suspension, 3 axles, BPW axles, turntable, ABS (anti-lock braking system), lashing eyes, hydraulic ramps, rear support, side aluminium underrun protection, twin tires, storage box. Bsdpfxoqpgtme Ah Sjlg Body: Hydraulic ramps, extendable to 3 m. BPW axles, drum brakes, lashing rings on the outside. Ramp length approx. 4000 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Koşul: ikinci el, azami yük ağırlığı: 22.000 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2008, Donanım: ABS, Vehicle Identification Number: WMM0000080052540 STRAIGHT LOAD BED Container Locking System Unladen Weight: 8,000 kg German Inspection (HU): Due Gigant Axles with Drum Brakes Air Suspension Platform Dimensions: 9,400 mm – Loading Height: 880 mm – Dimensions, see image no. 4 Extendable to 3,000 mm with Lighting Drawbar – 50 mm Hydraulic Ramps, Split – Length 2,600 + 1,600 mm – Width 650 mm Support System Tyres: 235/75 R 17.5 Subject to change, prior sale and errors excepted. The description serves for the general identification of the vehicle and does not constitute a warranty in the sense of sales law. The decisive basis is the description as per the purchase contract. Bsdetuhv Rjpfx Ah Sjlg Our offer does not include a new roadworthiness inspection (TÜV) by default. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops! The vehicle may be adhesive-labelled and/or marked with advertising. Our general terms and conditions of delivery and payment apply.

Koşul: ikinci el, boş ağırlık: 6.250 kg, azami yük ağırlığı: 23.750 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2008, yükleme alanı uzunluğu: 8.300 mm, yükleme alanı genişliği: 2.510 mm, yükleme alanı yüksekliği: 930 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: kırmızı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 3 axles, turntable steering, leaf suspension, ABS (anti-lock braking system), extendable to 3m width, lashing rings, mechanical ramps, rear support legs, side aluminium underrun protection, twin tyres, storage box. Structure: 3-axle low loader trailer with mechanical loading ramps, 3x 10t Gigant axles, drum brakes, extendable to 3m width! Bsdpfx Ahsxvzq Ho Solg Ramp length approx. 2900mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Koşul: ikinci el, boş ağırlık: 5.750 kg, azami yük ağırlığı: 24.250 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/1993, süspansiyon: çelik, lastik boyutu: 235/75R17,5 141/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 141/140J, arka lastik boyutu: 235/75R17,5 141/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler --, Daha fazla veri için: !, Daha fazla detay: ! Bsdpfx Ahjy Ifhvs Selg

Koşul: ikinci el, boş ağırlık: 6.200 kg, azami yük ağırlığı: 23.800 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2006, süspansiyon: çelik, lastik boyutu: 235/75R17,5 141/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 141/140J, arka lastik boyutu: 235/75R17,5 141/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Lashing eyes, -- Errors, omissions, and changes excepted, sample images --, More data at: !, More details: ! Bjdoy Hh Icjpfx Ah Sslg

Koşul: mükemmel (kullanılmış), ilk tescil: 10/2013, toplam genişlik: 2.750 mm, Üretim yılı: 2013, Boş ağırlık: 14.500 kg Yük kapasitesi: 33.500 kg Bledpjy Ignwofx Ah Sjg Azami toplam ağırlık: 48.000 kg APK (Teknik Muayene): 02.2027'ye kadar geçerli Teknik durum: çok iyi Görsel durum: çok iyi Fiyat: Talep üzerine Daha fazla bilgi için lütfen Klaas Gerrits veya Henk Gerrits ile iletişime geçin.

Koşul: yeni, azami yük ağırlığı: 16.400 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPM Tire Pressure Monitoring * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11-ton BPW Eco axles * Air suspension with lifting and lowering system * SmartBoard as an information tool on the trailer, with pressure sensors for display of total axle load per axle group * Lateral underrun protection * Mechanically adjustable warning panel packages front and rear * Front: closed plastic mudguards, Rear: straight galvanized steel skirts, each with spray guards * Hinged (hot-dip galvanized) lid for the toolbox on the turntable platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm (black powder-coated), mounted on the right side * 15-pin power connector * LED lighting 12 / 24 V * Removable LED rotating beacon at the rear * Side marker lights with indicator control * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * Tire pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck) * Rubber covering on folding ramps and on the entry slope left and right (approx. 860 mm long) * Rubber covering on longitudinal beams from front to rear crossmember * Hardwood flooring on running surfaces of the low-bed platform * Four stake pockets on each side, with simultaneous 2-ton lashing capability per pocket * Load securing package comprising: 5 pairs UVV lashing rings, swiveling and retractable, loadable from all directions and recessed in the external frame - in the corners 13.4 tons, otherwise 10 tons * 6 pairs of mechanical folding outriggers for total width of 3 meters (not on the rear slope) * Plank holders under the loading area, longitudinal alignment * Raised roller stop in front of the front crossmember, with 1 x 6.4-ton lashing ring on each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves * Hydraulic lateral ramp displacement * Hydraulic rear support (single-stage cylinder) * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 up to max. 140 l/min) * Hydraulic control block, splash-proof Bljdeq Dyvcjpfx Ah Ssg * Two-line hydraulic system * Loading area above turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm entry slope) * Loaded platform height: approx. 890 mm +/- 20 mm (with air suspension) * Chassis, turntable, roller stop, folding extensions & access ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks etc. painted in black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 20/2026

Koşul: yeni, azami yük ağırlığı: 16.400 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift and lower system * SmartBoard as an info tool on the trailer with pressure sensors to display axle loads per axle group * Side underrun protection * Mechanically adjustable warning sign packages at front and rear * Front axle fully enclosed plastic mudguards and rear axle straight galvanized steel skirts, each with splash guards * Foldable (hot-dip galvanized) lid for the toolbox on the turntable platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm (black powder-coated) mounted on the right side * 15-pin power connector Bledpfxetplv Ne Ah Sjg * LED lighting 12/24 V * Removable LED beacon at the rear * Side marker lights with indicator activation * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * Tire pressure monitoring system with display capability in the truck via EBS signal (without truck-side installation) * Rubber covering on folding ramps and on the approach slope left and right (approx. 860 mm) * Rubber covering on longitudinal beams from front bulkhead to rear cross member * Hardwood flooring on the running surfaces of the low-bed platform * Four stake pockets each side with integrated 2 t lashing points * Load security package consisting of: 5 pairs of UVV lashing rings, swivel-mounted and retractable, loadable in all directions and embedded in the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers up to 3 m overall width (not on the rear slope) * Plank holder under the loading area in longitudinal direction * Raised roller stop in front of bulkhead with 1 x 6.4 t lashing ring each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically deployable tip section and load-holding valves * Hydraulic lateral ramp shift * Rear support hydraulically operated (single-stage cylinder) * Hydraulic flow divider in trailer (for hydraulic pump capacity in truck over 40 l/min up to max. 140 l/min) * Hydraulic control block splash-proof * Two-line hydraulic system * Turntable area loading deck: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach slope) * Loaded loading height: approx. 890 mm +/- 20 mm air suspension * Chassis, turntable, roller stop, folding extensions, and ramps hot-dip galvanized * Axles, turntable, drawbar, air tank, etc. painted in a black tone * Loaded loading height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from calendar week 20/2026

Koşul: ikinci el, azami yük ağırlığı: 16.950 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2006, bir sonraki muayene (TÜV): 04/2026, Üretim yılı: 2006, * Müller Mitteltal T3 NG * Low loader * Ramps * Twin tires * Permissible total weight: 24,000 kg * Unladen weight: 7,050 kg * Payload: 16,950 kg * Tires: see pictures * BPW axles * Immediately available * Errors excepted Blodpfx Aeyv Ug Doh Sjg We offer: Net purchase for companies from the EU with a VAT ID, as well as customers from third (non-EU) countries. Leasing and financing options. Handling of all customs formalities. Issuance of short-term and export license plates. Transport to the port. All prices listed on the classifieds portal are gross prices and already include the statutory VAT of 19%.

Koşul: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual rear lowering ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Towing Bar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment ----Electrics / Lighting: * LED rear lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Tool box made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic impact protection buffers * Mechanical drop-down supports at rear ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer rails (approx. 25 mm higher) to guide roll-off containers * Steel floor with roller recesses in the bogie area * When transporting roll-off containers, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-way clamp lock and mechanical plug-in stop angles at the front in the tracks * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 stops plug-in with articulated buffer ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for securing skips with tensioning elements (positive and frictional locking) * 4 cloverleaf lashing rails on the sides and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Welded bead anti-slip surface in the inclined ramp area * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Tyres: * Tyres: 235/75 R17.5 Bsdpfx Aetplv Tsh Solg ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Contour tape side and rear, reflective * Axles, turntable, drawbar, and air tanks painted in black tone * Hot-dip galvanized main frame ----Info: * Technically permissible gross weight: 27,000 kg * New vehicle, unregistered, with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 20/2026

Koşul: ikinci el, makine/araç numarası: GE11/142/2022, boş ağırlık: 6.350 kg, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2008, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.500 mm, süspansiyon: hava, Çok iyi korunmuş, 1. elden araç Üç dingilli alçak şasi geçişli treyler Rampalı alçak şasi treyler Ağır yük taşımacılığı Tip: T3 Kompakt 30,0 Uzunluk: 8500 mm Genişlik: 2500 mm Hava süspansiyonu Ticari/İhracat net fiyatı - 15.990 € Değişiklik, ara satış ve hatalar saklıdır Bljden Aw Hkspfx Ah Sog ===== Telefon2 Mobil =====

Koşul: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2025, * T3 Profi 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at rear * Side underrun protection * Rear swing-out supports mounted to chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic fenders; rear axle: straight galvanized steel skirts, each with spray guards * Reflective contour marking tape on sides and rear * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Foldable lid (hot-dip galvanized) for the toolbox on the turntable platform Bjdel Th I Aepfx Ah Solg * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Towing bracket with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pole power plug * 4 stake pockets per side (no stakes included), with integrated lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 6 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions and recessed into the outer frame – rated at 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for 3 m total width (not on the rear slope) * Widening planks stored in the center of the loading area * Hot-dip galvanized monobloc hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally * 4-way control block for retrofit of hydraulic side ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach ramp) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technically permissible total weight: 30,000 kg * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from calendar week 11/2026

Koşul: yeni, azami yük ağırlığı: 30.740 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lower function and RtR valve * Smard-Board for load weight measurement * Warning panel packages at front & rear * Side and rear reflective contour tape * Rotating beacon (removable) at rear * LED lamp * Straight drawbar with 50 mm towing eye and infinitely adjustable height setting * Tool box made of powder-coated steel sheet and spare wheel holder in basket design, right side * Closed individual plastic mudguards at the front * Straight steel mud flaps with splash guards at the rear (spray suppression) * Side underrun protection * Extension of the turntable platform at front by 520 mm with 45° corners and three recessed storage compartments incl. lid and lockable * Chassis made of high-strength fine-grain steel * Platform floor over turntable platform made of 50 mm and in low-loader platform of 60 mm coniferous wood Bljdjl Tik Nspfx Ah Sog * Outer planks of the drive-on ramps made of hardwood * Four stake pockets each side (stakes not included), with simultaneous 2 t lashing capability * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform * Two pairs of 13.4 t lashing rings each at the front and rear of the side outer frame, and four pairs of 10 t lashing rings each side, swiveling and lowerable * Loadable in all directions and recessed into the outer frame * Two pairs of 6.4 t lashing rings at the excavator stick recess on each side * 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Widening planks stored in side left storage compartment * Excavator stick compartment above rear axle up to end of drive-on slope, approx. 2,100 x 740 x 190 mm * Mechanical support legs at the rear * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm, incl. hydraulic side ramp shift and load holding valve * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height laden: approx. 890 mm, +/- 20 mm (including 860 mm drive-on slope) * Flow divider installed * Chassis, turntable, drive-on ramps, folding outriggers and mechanical support legs hot-dip galvanized * Axles, drawbar, air reservoir and slewing ring painted in black * Tires 235/75 R 17.5 * New vehicle without first registration with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf, on the A7