Alçak şasi römorkMÜLLER-MITTELTAL
3-achs 30 to., 3 mtr. Paket, verzinkt, Luftfed.
Alçak şasi römork
MÜLLER-MITTELTAL
3-achs 30 to., 3 mtr. Paket, verzinkt, Luftfed.
sabit fiyat KDV hariç
€46.900
(€55.811 brüt)
Üretim yılı
2024
Durumu
Yeni
Konum
Egestorf 

Resimleri göster
Haritayı göster
Temel veriler
Fiyat ve Konum
sabit fiyat KDV hariç
€46.900
(€55.811 brüt)
- Satıcının konumu:
- Eichenstich 12, 21272 Egestorf, Almanya

Ara
Teknik detaylar
- Azami yük ağırlığı:
- 23.700 kg
- Toplam ağırlık:
- 30.000 kg
- Dingil konfigürasyonu:
- 3 dingil
Teklif detayları
- Listeleme kimliği:
- A104-34-320
- Referans no.:
- 5902
- Son güncelleme tarihi:
- 10.07.2025
Açıklama
* T3 Profi 30.0:
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring system (TPMS)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Air suspension with manual lowering at the rear
* Pressure gauge for load weight determination (axles separated on 2 air suspension circuits)
* Side underrun protection
* Swing-out supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages at front and rear
* Front axle with closed plastic fenders, rear axle with straight, galvanized steel splash guards, each with spray protection
* Reflective contour marking tape on sides and rear
* Hinged lid (hot-dip galvanized) for the toolbox in the turntable platform
* LED taillights
* Removable rotating beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle
* 2 x 7-pin electrical sockets
* Four stake pockets per side, each with 2 t lashing possibility
* Load securing package consisting of: 2 lashing eyes (6.4 t) at front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and integrated into the outer frame – 13.4 t at the corners, otherwise 10 t
* 6 pairs of mechanical folding outriggers for a total vehicle width of 3 m (not in the rear slope)
* Widening planks stored in the center of the loading area
* Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable
* Loading area above turntable: approx. 1,960 x 2,520 mm
Knsdpfx Asl Tq Euoggsf
* Loading height unloaded approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Loading height unloaded approx. 910 mm (incl. 860 mm drive-up slope)
* Chassis, turntable, drawbar, folding widenings, and ramps hot-dip galvanized
* Axles, turntable, air tanks, etc. painted in black tone
* Tires: 235/75 R 17.5
* Payload approx. 24,000 kg with a total weight of 30,000 kg
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring system (TPMS)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Air suspension with manual lowering at the rear
* Pressure gauge for load weight determination (axles separated on 2 air suspension circuits)
* Side underrun protection
* Swing-out supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages at front and rear
* Front axle with closed plastic fenders, rear axle with straight, galvanized steel splash guards, each with spray protection
* Reflective contour marking tape on sides and rear
* Hinged lid (hot-dip galvanized) for the toolbox in the turntable platform
* LED taillights
* Removable rotating beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle
* 2 x 7-pin electrical sockets
* Four stake pockets per side, each with 2 t lashing possibility
* Load securing package consisting of: 2 lashing eyes (6.4 t) at front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and integrated into the outer frame – 13.4 t at the corners, otherwise 10 t
* 6 pairs of mechanical folding outriggers for a total vehicle width of 3 m (not in the rear slope)
* Widening planks stored in the center of the loading area
* Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable
* Loading area above turntable: approx. 1,960 x 2,520 mm
Knsdpfx Asl Tq Euoggsf
* Loading height unloaded approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Loading height unloaded approx. 910 mm (incl. 860 mm drive-up slope)
* Chassis, turntable, drawbar, folding widenings, and ramps hot-dip galvanized
* Axles, turntable, air tanks, etc. painted in black tone
* Tires: 235/75 R 17.5
* Payload approx. 24,000 kg with a total weight of 30,000 kg
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2001
İstek gönder
Telefon & Faks
+49 40 33... ilanlar
Bu ilanlar da ilginizi çekebilir.
İlanınız başarıyla silindi
Bir hata oluştu





































