Kullanılmış Müller-Mitteltal T3 Profi 30,0 Neu, Baggerstiel, Luftfed. satın al (5.212)

Koşul: yeni, azami yük ağırlığı: 23.700 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * T3 Profi 30.0: Dodpfx Alsl Tpwyjdscg * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release system for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift and lower function via RtR valve * Smart-Board for infotool * Side underrun protection * Swing-out support legs at the rear chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle with enclosed plastic mudguards, rear axle with straight galvanized steel splash guards, each with spray protection * Contour marking tape, reflective on sides and rear * Hinged lid (hot-dip galvanized) for toolbox located on turntable platform * LED tail lights * Removable beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle * 15-pin electrical connector * 4 stake pockets on each side, each with 2 t lashing capability * Load securing package includes: 2 lashing eyes (6.4 t) at front left & right on the main frame of the turntable platform; 5 pairs of UVV-compliant swivel and lowerable lashing rings, loadable in all directions and recessed in the outer frame (corners 13.4 t, otherwise 10 t) * 6 pairs of mechanical folding outriggers for 3 m overall width (except at rear slope) * Widening planks stored in the center of the loading area * Hydraulic, one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Excavator arm rest over rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, drawbar, folding extensions & loading ramps hot-dip galvanized * Axles, turntable, air tank etc. painted in black tone * Tyres: 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg GVWR * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Available approx. week 32 / 2026 * Sample photos

Koşul: yeni, azami yük ağırlığı: 23.700 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring-loaded cylinders Dcedpfol Tq Euox Aldjg * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with raise/lower function and RtR valve * Smart-Board as infotool * Side underrun protection * Rear swing-out supports on chassis frame * Mechanically adjustable warning sign sets front and rear * Front axle with closed plastic mudguards, rear axle with straight galvanized steel fender panels, each with splash guards * Reflective contour tape on sides and rear * Hinged (hot-dip galvanized) toolbox lid on turntable platform * LED tail lights * Removable beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side, each with integrated 2 t lashing points * Load securing package includes: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions, recessed into the outer frame (13.4 t at corners, otherwise 10 t) * 6 pairs of mechanical folding outriggers for 3 m overall width (except at the rear chamfer) * Widening planks stored in the center of the loading platform * Hydraulic, one-piece loading ramps (approx. 3,000 x 720 mm), adjustable laterally * Excavator boom trough above the rear axle up to the end crossbeam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings fitted on the sides of the trough) * Loading area above turntable: approx. 1,960 x 2,520 mm * Unloaded loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unloaded loading height: approx. 910 mm (including 860 mm rear approach slope) * Chassis, turntable, towing bar, folding extensions & ramps hot-dip galvanized * Axles, turntable, air reservoir etc. painted in black * Tires: 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg gross weight * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Available from approx. week 32 / 2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0: * EBS brake system Dodpsx Ipbgofx Aldjcg * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not supplied), also usable as lashing points * Load securing package consisting of: 2 lashing rings (6.4 t) at front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions, integrated into the outer frame — corners rated for 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not fitted at the rear slope) * Widening planks stored in the middle of the loading area * Digger stick rest above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the digger stick rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic side-shifting of ramps * Load area over the turntable: approx. 1,960 x 2,520 mm * Unladen load height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen load height: approx. 910 mm (including 860 mm drive-on slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from approx. calendar week 36/2026

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle with closed plastic mudguards and rear axle with straight galvanized steel skirts, each with spray guards * Lateral and rear reflective contour tape * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical plug * Four stake pockets on each side (no stakes included) with simultaneous lashing possibility * Load securing package (La-Si package) consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV lashing rings, swiveling and retractable, loadable in all directions and recessed in the outer frame – 13.4 t in the corners, otherwise 10 t. * 6 pairs of mechanical fold-out outriggers for 3-meter total width (except at the rear incline) * Widening planks stored in the center of the loading area * Excavator arm rest over rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the excavator arm rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp displacement * Load area above the turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible total weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and intermediate sale reserved Dedpfex Ipb Hjx Aldscg * Available from approx. week 36/2026

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Side underrun protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front: closed plastic fenders; Rear: straight galvanized steel skirts, both with splash protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi-voltage electrical system * LED tail lights * Removable beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * Four stake pockets on each side (stakes not included), with simultaneous lashing facility * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and recessed in the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slant) * Widening planks stored at the center of the loading area * Excavator arm rest from rear axle to end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the excavator arm rest) * Mechanical one-piece access ramps with spring assistance (approx. 3,000 x 720 mm) * Mechanically adjustable lateral ramp positioning Dcjdpfx Aox Ipa Nsldsg * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, towing bar, and access ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires * Dead weight 5,900 kg * --Technically possible gross vehicle weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available from Egestorf

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization (rear) * Side underrun protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox on the bogie platform * Multi-voltage system * LED rear lights * Detachable rotating beacon (rear) * Towing bar with 40 mm towing eye and height adjustment via return spring & turnbuckle * 15-pin electrical connector * 4 stake pockets per side (stakes not included) with integrated lashing points * Load securing package (La-Si Package) includes: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV lashing rings, pivoting and retractable, loadable in all directions and recessed into the outer frame – in corners 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for 3 m overall width (not at the rear diagonal) * Widening planks stowed in the center of the loading area * Excavator arm trough over rear axle to end crossmember, approx. 2,100 mm long (2 pairs 6.4 t lashing eyes on each side in the excavator arm trough) * Mechanical single-piece access ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment Dcsdpfox Ipavex Aldog * Load area above turntable: approx. 1,960 x 2,520 mm * Unladen load height: approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Unladen load height: approx. 910 mm (incl. 860 mm approach angle) * Chassis, bogie, towing bar, and ramps hot-dip galvanized * Axles, springs, air reservoir, etc. painted in black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * Technically permissible gross weight of 30,000 kg * Vehicle is hot-dip galvanized * Brand new vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 ton BPW Eco axles * Parabolic leaf springs * Mechanical axle equalization at the rear * Side underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning panel sets at front and rear * VA closed plastic mudguards and HA straight galvanized steel skirts, each with spray protection * Contour marking tape, reflective on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED rear lights * Removable beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle * 15-pin electrical plug * Four socket pockets on each side (no stakes included) with integrated lashing options * Load securing package consisting of: 2 lashing rings (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant swivel and retractable lashing rings, loadable in all directions and recessed into the outer frame – in corners 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for 3 m total width (not in the rear chamfer) * Widening planks stored in the center of the loading area * Digger arm rest above the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides in the digger arm rest area) * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way control valve block for the later retrofitting of hydraulic ramp shift * Mechanically operated lateral ramp shifting * Loading platform above the turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading platform: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg tare weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale Dedel Thxdepfx Aldjcg * Immediately available ex works Egestorf

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front closed plastic fenders as well as rear straight galvanized steel mudguards, each with splash protection * Side and rear conspicuity tape, reflective * Hinged lid (hot-dip galvanized) for the toolbox on the bogie platform Dcjdol Th Adspfx Aldsg * Multi voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment by means of tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included) with simultaneous lashing capability * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of swivel- and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – with 13.4 t in the corners and 10 t elsewhere * 6 pairs of mechanical folding supports for a total width of 3 meters (not in the rear slope) * Widening boards stored in the center of the loading area * Digger arm rest from the rear axle to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the digger arm rest) * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm) * 4-way control block for later retrofitting of hydraulic ramp shifting * Mechanically adjustable lateral ramp movement * Load area above slewing ring: approx. 1,960 x 2,520 mm * Load height unladen approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Load height unladen approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg empty weight * -- technically permissible gross weight of 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale reserved * Immediately available ex Egestorf

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 85.000 mm, yükleme alanı genişliği: 30.000 mm, yükleme alanı yüksekliği: 30.000 mm, Üretim yılı: 2016, T3 Profil 30, 0: Drum brakes, 3 x 10 t axles, side underrun protection, swing-out supports at the rear of the chassis frame, mechanically adjustable warning sign packages at the front and rear, folding lid on the toolbox in the bogie platform, 4 lashing eyes per side, 6 pairs of mechanical folding outriggers for a total width of 3 m, extension planks stored in the middle of the loading area, hydraulically operated, two-part loading ramps, laterally adjustable, loading area above the slewing ring: approx. 2,000 x 2,520 mm, loading height approx. 1,070 mm, rear loading area: approx. 6,500 x 2,520 / 3,000 mm, loading height approx. 910 mm (including 860 mm approach slope), technically permitted gross weight of 30,000 kg, vehicle is hot-dip galvanized and in excellent, near-new condition. = Further information = Weights Payload: 24,000 kg Dcodpfx Alsyz Ix Rodeg gross vehicle weight: 6,000 kg Maintenance, history, and condition Number of owners: 1 Technical condition: Very good Visual condition: Very good Further details Front tire condition: 90% Rear tire condition: 90% Front tires: 235/75 R 17.5 Rear tires: 235/75 R 17.5 Country of manufacture: DE Further information Please contact Bernd Strack for further details.

Koşul: ikinci el, azami yük ağırlığı: 17.290 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2017, bir sonraki muayene (TÜV): 07/2026, yükleme alanı uzunluğu: 8.900 mm, yükleme alanı genişliği: 2.520 mm, Donanım: ABS, * ABS * 5-odalı arka farlar * Turuncu döner uyarı lambası * Duomatik hava bağlantısı * BPW-ECO akslar ----Üst yapı: Alçak şasi römork, galvanizli şasi (1900+7000mm)/yaklaşık 900mm yükleme yüksekliği, arka kısmı eğimli/yaklaşık 770mm rampa yüksekliği, çelik/ahşap zemin, 3 metreye kadar genişletilebilir, kaymaz kaplamalı hidrolik katlanır rampalar (galvanizli), hidrolik olarak yana kaydırılabilir, sabitleme halkaları Djdpfx Aloyulu Usdjcg Satış yalnızca ticari işletmelere yapılmaktadır. İHRACATTA SADECE NET FİYAT ÖDENİR!!!!! TÜM BİLGİLER EKİPMAN VE AKSESUARLAR İÇİN GARANTİSİZ VERİLMİŞTİR. Tüm satın alma sözleşmeleri, faturalar, proforma faturalar, siparişler ve satış görüşmelerinin temeli genel şartlarımızdır (ayrıntılar için künyeye bakınız).

Koşul: yeni, azami yük ağırlığı: 30.740 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lower function and RtR valve * Smard-Board for load weight measurement * Warning panel packages at front & rear * Side and rear reflective contour tape * Rotating beacon (removable) at rear * LED lamp * Straight drawbar with 50 mm towing eye and infinitely adjustable height setting * Tool box made of powder-coated steel sheet and spare wheel holder in basket design, right side * Closed individual plastic mudguards at the front * Straight steel mud flaps with splash guards at the rear (spray suppression) * Side underrun protection * Extension of the turntable platform at front by 520 mm with 45° corners and three recessed storage compartments incl. lid and lockable * Chassis made of high-strength fine-grain steel * Platform floor over turntable platform made of 50 mm and in low-loader platform of 60 mm coniferous wood * Outer planks of the drive-on ramps made of hardwood Dedpfx Alol Tik Nodocg * Four stake pockets each side (stakes not included), with simultaneous 2 t lashing capability * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform * Two pairs of 13.4 t lashing rings each at the front and rear of the side outer frame, and four pairs of 10 t lashing rings each side, swiveling and lowerable * Loadable in all directions and recessed into the outer frame * Two pairs of 6.4 t lashing rings at the excavator stick recess on each side * 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Widening planks stored in side left storage compartment * Excavator stick compartment above rear axle up to end of drive-on slope, approx. 2,100 x 740 x 190 mm * Mechanical support legs at the rear * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm, incl. hydraulic side ramp shift and load holding valve * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height laden: approx. 890 mm, +/- 20 mm (including 860 mm drive-on slope) * Flow divider installed * Chassis, turntable, drive-on ramps, folding outriggers and mechanical support legs hot-dip galvanized * Axles, drawbar, air reservoir and slewing ring painted in black * Tires 235/75 R 17.5 * New vehicle without first registration with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf, on the A7

Koşul: yeni, azami yük ağırlığı: 30.740 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles Djdpsl Tphrsfx Aldjcg * Air suspension with lifting and lowering system and RtR valve * Smard on-board system for load weight determination * Warning panel packages at front & rear * Reflective contour marking tape on sides and rear * Removable rear rotating beacon * LED lights * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Tool box made of powder-coated sheet steel and spare wheel carrier in basket design, mounted on the right side * Front: closed single fender in plastic * Rear: straight steel mudguards with spray suppression (spray mist reduction) * Side underrun protection * Extension of the bogie platform at the front by 520 mm with 45° corners and 3 integrated storage compartments including lids, lockable * Chassis made of high-strength fine-grained steel * Floor above bogie platform: 50 mm softwood; deep bed platform: 60 mm softwood * Outer planks of access ramps made of hardwood * 4 stake pockets per side (no stakes present), each with 2 t lashing capacity * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform * At the side, front and rear: 2 pairs each of 13.4 t lashing rings on the outer frame; also, 4 pairs per side of 10 t lashing rings, swivel and lowerable * Loadable in all directions and recessed into the outer frame * 2 pairs of 6.4 t lashing rings at the excavator arm rest * 8 pairs of galvanized fold-out outriggers for 3-meter total width (not in the rear slope) * Widening planks for the left side stored in a compartment * Excavator arm rest above the rear axle up to the end of the approach slope approx. 2,100 x 740 x 190 mm * Mechanical rear supports * Hydraulic folding ramps with hydraulically adjustable tip section approx. 4,650 x 720 mm incl. hydraulic lateral ramp shifting & load-holding valve * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height (loaded): approx. 890 mm, +/- 20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, bogie, access ramps, fold-out outriggers and mechanical rear supports hot-dip galvanized * Axles, drawbar, air tank and slewing ring painted in black * Tires: 235/75 R 17.5 * New vehicle without first registration, includes manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf, A7

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, Donanım: ABS, * T 3: * ABS braking system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic leaf springs Dcodpfxsq Dyv Io Aldjg * Mechanical axle equalization at the rear * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front & rear * Front: closed plastic mudguards; rear: straight galvanized steel skirts, each with spray protection * Reflective contour tape on the sides and rear * Foldable (hot-dip galvanized) cover for the toolbox on the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm - powder-coated in black - mounted on the side under the chassis * 15-pin electrical connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 4 stake pockets on each side (stakes not included) with simultaneous lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform * 5 pairs of UVV folding and lowering lashing rings * Loadable in all directions, recessed into the external frame at the corners (13.4 t), otherwise 10 t * 6 pairs of mechanical folding outriggers for a total width of 3 m (not at rear chamfer) * Extension planks stored in a compartment under the loading area * Excavator arm rest over the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable ramp tip and load holding valves, hydraulic lateral ramp shift * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity over 40 ltr. up to max. 140 ltr./min.), dual-line hydraulic system * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded deck height approx. 860 mm +/- 30 mm compensation unit * Chassis, bogie, folding outriggers, drop-down rear supports and ramps hot-dip galvanized * Axles, springs, drawbar, air tanks etc. painted in black * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 19/2026

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, Donanım: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at rear * Side underrun protection Dsdpstplwfofx Aldscg * Pivoting supports at the rear of the chassis frame * Mechanically adjustable warning panel sets at front & rear * Front axle: closed plastic fenders; rear axle: straight, galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Hinged (hot-dip galvanized) cover for toolbox on the turntable platform * Toolbox made of galvanized steel, approx. 650 x 300 x 600 mm, powder-coated black, mounted laterally under the chassis * 15-pin electrical connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 4 stake pockets per side (no stakes included), doubles as lashing points * Load securing package including: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swiveling and retractable * Loadable in all directions, integrated in outer frame corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for overall width of 3 m (not at rear slope) * Extension planks for platform width stored in a storage compartment under loading area * Digger arm cradle above rear axle up to rear crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings per side in the cradle) * Hydraulically operated folding ramps (approx. 4,650 x 720 mm) with hydraulic movable tip and load holding valves, hydraulically adjustable ramp lateral shift * Hydraulic flow divider in trailer (for truck hydraulic pump performance over 40 l up to max. 140 l/min), dual-circuit hydraulics * Loading area above turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm drive-up slope) * Loaded platform height approx. 860 mm +/- 30 mm with compensation unit * Chassis, turntable, folding outriggers, drop supports at rear, and loading ramps hot-dip galvanized * Axles, springs, drawbar, air tanks, etc., painted black * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 19/2026

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, süspansiyon: parabolik yaprak (yay), lastik boyutu: 235-75R17.5, Üretim yılı: 2010, 3 dingilli alçak şasi römork, arkadan yüklenebilir. Azami toplam ağırlık 30.000 kg, taşıma kapasitesi 22.700 kg. Yükleme alanı 8.900 mm (7.000 + 1.900) x 2.550 mm, aşırı genişlik için ikaz paketi, 12 yük bağlama halkası ile 8 dikme cebi, aynı zamanda bağlama imkanı, 6 adet alet kutusu. İki parçalı hidrolik rampalar yaklaşık 2.100+2.000 x 800 mm ve kauçuk kaplamalı, hidrolik arka destek. BPW akslar, EBS, dengeleme ünitesine sahip parabolik süspansiyon, lastik ölçüsü 235-75 R 17.5. Kavisli çekme kolu, döner çekme gözü 40+50 mm. 2 hatlı hava (Duomatik), 2 hatlı hidrolik, 24 volt. Boşken yükseklik yaklaşık 910 mm. Turuncu boyalı. Muayenesi 03-2027'ye kadar geçerli. = Ek Bilgiler = Lastik ölçüsü: 235-75R17.5 Süspansiyon: Parabolik süspansiyon Boş ağırlık: 7.300 kg Yük kapasitesi: 22.700 kg Azami toplam ağırlık: 30.000 kg Üretim ülkesi: DE Daha fazla bilgi için Jan-Marc Schwickert ile iletişime geçin. Dcsdpfjy Evvlsx Aldeg

Koşul: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2008, bir sonraki muayene (TÜV): 03/2024, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 910 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: turuncu, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, leaf suspension, 3 axles, BPW axles, turntable, ABS (anti-lock braking system), lashing eyes, hydraulic ramps, rear support, side aluminium underrun protection, twin tires, storage box. Dsdpfsqpgtmjx Aldocg Body: Hydraulic ramps, extendable to 3 m. BPW axles, drum brakes, lashing rings on the outside. Ramp length approx. 4000 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Koşul: ikinci el, azami yük ağırlığı: 22.000 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2008, Donanım: ABS, Vehicle Identification Number: WMM0000080052540 STRAIGHT LOAD BED Container Locking System Unladen Weight: 8,000 kg German Inspection (HU): Due Gigant Axles with Drum Brakes Air Suspension Platform Dimensions: 9,400 mm – Loading Height: 880 mm – Dimensions, see image no. 4 Extendable to 3,000 mm with Lighting Drawbar – 50 mm Hydraulic Ramps, Split – Length 2,600 + 1,600 mm – Width 650 mm Support System Tyres: 235/75 R 17.5 Dsdpfjtuhv Rsx Aldjcg Subject to change, prior sale and errors excepted. The description serves for the general identification of the vehicle and does not constitute a warranty in the sense of sales law. The decisive basis is the description as per the purchase contract. Our offer does not include a new roadworthiness inspection (TÜV) by default. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops! The vehicle may be adhesive-labelled and/or marked with advertising. Our general terms and conditions of delivery and payment apply.

Koşul: ikinci el, boş ağırlık: 6.250 kg, azami yük ağırlığı: 23.750 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2008, yükleme alanı uzunluğu: 8.300 mm, yükleme alanı genişliği: 2.510 mm, yükleme alanı yüksekliği: 930 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: kırmızı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 3 axles, turntable steering, leaf suspension, ABS (anti-lock braking system), extendable to 3m width, lashing rings, mechanical ramps, rear support legs, side aluminium underrun protection, twin tyres, storage box. Structure: 3-axle low loader trailer with mechanical loading ramps, 3x 10t Gigant axles, drum brakes, extendable to 3m width! Dcedpfx Alsxvzq Hsdog Ramp length approx. 2900mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Koşul: ikinci el, boş ağırlık: 5.750 kg, azami yük ağırlığı: 24.250 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/1993, süspansiyon: çelik, lastik boyutu: 235/75R17,5 141/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 141/140J, arka lastik boyutu: 235/75R17,5 141/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler --, Daha fazla veri için: !, Daha fazla detay: ! Dcodsy Ifhvepfx Aldog

Koşul: ikinci el, boş ağırlık: 6.200 kg, azami yük ağırlığı: 23.800 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2006, süspansiyon: çelik, lastik boyutu: 235/75R17,5 141/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 141/140J, arka lastik boyutu: 235/75R17,5 141/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Lashing eyes, -- Errors, omissions, and changes excepted, sample images --, More data at: !, More details: ! Dcjdpfjy Hh Icex Aldsg

Koşul: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual rear lowering ----Axle: * 3 x 11 t Gigant axles * Middle axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Fittings: * Tool box made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets, made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear impact protection buffer * Mechanical drop-down supports at rear ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide roll-off containers * Steel floor with recessed rollers in the bogie area * When transporting roll-off containers, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point container locking as well as mechanically insertable end stops at the front in the guide rails * Load securing certificate in accordance with DIN 30722-1 * Transport of up to 2 skip containers with a max. volume of 10 m³ possible * 8 movable skip stops for lateral centering of the skips, front 4 skip stops insertable with oscillating end stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips * 4 side lashing cleats (cloverleaf design) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Welded anti-slip strip in the running area of the ramp incline * 1 pair of aluminum approach ramps (16 t / pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Tires: * Tires: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Side and rear contour tape, reflective * Axles, turntable, drawbar, and air tanks painted black * Hot-dip galvanized main frame ----Information: * Technical permissible gross weight up to 27,000 kg Djdopk D Awopfx Aldocg * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 47/2026

Koşul: yeni, azami yük ağırlığı: 14.620 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * RA-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * Tire pressure monitoring system (RDÜ) * Emergency release device for spring-loaded cylinders * Disc brakes * 2 x 10 t BPW wide-track axles * Air suspension (automatic lowering when brake is uncoupled) * Drawbar approx. 2,300 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle * Plastic tool box 450 x 470 mm, mounted on the right side * Side-mounted storage box 1,000 x 500 x 500 mm * Closed plastic mudguards, front and rear * Closed lateral underride protection, usable as advertising surface * Rear underrun protection * Rear plastic bumper pads * Rear hazardous goods placard * 15-pin electrical connector * LED rear lights * Rollway length approx. 6,830 mm * Pneumatic 4-point container lock * Mechanically adjustable stop brackets (2 positions) front left and right on the tracks * 265/70 R 19.5 twin tires * Unladen weight 3,220 kg * --Permissible total weight up to 20,000 kg technically possible-- * Approx. 1,130 mm ride height when loaded * Suitable for container lengths from 5,500 to 7,000 mm * Hot-dip galvanized chassis * Air tanks, axles, slewing ring, and drawbar Dcodov Nulzepfx Aldog * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Available from approx. week 29 / 2026

Koşul: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual rear lowering ----Axle: * 3 x 11 t Gigant axles * Center axle can be lifted ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Tool box made of powder-coated steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray suppression * Plastic rear bumper pads * Mechanical rear safety support legs ----Container / Low-loader Platform: * Hot-dip galvanized main frame with raised outer rails (approx. 25 mm higher) for guiding roll-off containers * Steel floor with roller depressions in the turntable area * For roll-off container transport, container lengths from 5,500 - 7,000 mm possible * Pneumatic 4-point locking system and mechanical plug-in end stops at the front of the running rails * Load securing certificate as per DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 removable skip container stops for lateral centering, front 4 stops with swingable end stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on each side for attaching tie-down elements for positive and non-positive securing of skip containers * 4 cloverleaf-style lashing bars (each side) and 1 pair of 13.4 t UVV lashing rings to the front * Load securing certificates per DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 Dsdpfotplv Tox Aldocg ----Ramps: * Welded bead as anti-slip surface in the ramp track area * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Tires: * Tires: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides & rear * Axles, turntable, drawbar and air tanks painted in a shade of black * Hot-dip galvanized main frame ----Info: * Gross vehicle weight of 27,000 kg technically possible * New vehicle without initial registration, with manufacturer warranty * Errors and prior sale reserved ----Delivery Time: * Available from approx. week 47/2026

Koşul: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle with lift function ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & adjustable height device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic impact protection buffers * Mechanical drop-down supports at the rear ----Container / Low Loader Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with wheel recesses in the bogie area * Suitable for roll-off containers with a container length of 5,500 - 7,000 mm * Pneumatic 4-point clamp-locking system plus mechanical plug-in front stops in the running rails * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip container stops for lateral centering, front 4 stops lockable with pivoting backstop ----Load Securing: Dcodpepk D Iiofx Aldog * 3 pairs of 10 t UVV lashing rings on the sides for attaching tension elements to secure skip containers positively and non-positively * 4 lashing rails per side (cloverleaf design) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Weld beads as anti-slip surface in the track area of the ramp slope * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tires: 235/75 R17.5 ----Loaded Platform Height: * Platform height loaded: approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Paintwork: * Contour tape, reflective, on sides and rear * Axles, turntable, drawbar, and air tanks painted in black * Hot-dip galvanized main frame ----Info: * Technical permissible total weight: 27,000 kg * New vehicle without first registration with manufacturer warranty * Subject to alterations and prior sale ----Delivery time: * Available from approx. week 47/2026

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, ilk tescil: 10/2013, toplam genişlik: 2.750 mm, Üretim yılı: 2013, Müller Mitteltal ITS-VLL 30.0 Profi Low Loader | 3-axle | Hydraulic Low-Bed Platform | 48 t GVW | 275 cm wide The extremely robust and stable Müller Mitteltal ITS-VLL 30.0 Profi low loader is ideally suited for the transport of machinery, construction equipment, and heavy-duty devices. It is renowned for its sturdy construction and reliability. Technical data: - Manufacturer: Müller Mitteltal - Model: ITS-VLL 30.0 Profi - Chassis no. (VIN): WMM00000D0057250 - Gross vehicle weight rating (GVWR): 48,000 kg - Axle configuration: 3-axle - Axle loads: - Axle 1: 10,000 kg - Axle 2: 10,000 kg - Axle 3: 10,000 kg - Permissible rolling load: 18,000 kg - Loading platform: low-bed design - Loading ramps: hydraulically operated - Lower platform: hydraulically adjustable (up/down) - Tyres: good condition - Construction: all-steel chassis - Maximum speed: 80 km/h Specification & Options: Dcjdpfxoy I Si Te Aldeg - Heavy-duty low-bed configuration - Hydraulically adjustable lowered loading platform (up/down) - Hydraulic rear loading ramps - Wide (275 cm) and stable loading area - Suitable for excavators, rollers, cranes, etc. Robust construction, immediately operational Condition: The trailer is used but fully functional, with age- and use-related signs of wear. Technically a reliable and robust equipment transporter. Immediately ready for use – ideal for transport and construction companies. For more information or to arrange a viewing, please contact us. = Further Information = Axle configuration - Rear axle 1: twin tyres; max. axle load: 10,000 kg; steered - Rear axle 2: twin tyres; max. axle load: 10,000 kg; steered - Rear axle 3: twin tyres; max. axle load: 10,000 kg; steered Weights - Unladen weight: 14,500 kg - Payload: 33,500 kg - GVW: 48,000 kg Maintenance, Inspection, and Condition - Technical inspection (APK): valid until 02/2027 - Technical condition: very good - Visual condition: very good Financial information - Price: On request For further information, please contact Klaas Gerrits or Henk Gerrits.