Çalışma platformlu römorkMÜLLER-MITTELTAL
3-achs 30 to., 3 mtr. Paket, verzinkt, Luftfed.
Çalışma platformlu römork
MÜLLER-MITTELTAL
3-achs 30 to., 3 mtr. Paket, verzinkt, Luftfed.
sabit fiyat KDV hariç
€46.900
(€55.811 brüt)
Durumu
Yeni
Konum
Egestorf 

Resimleri göster
Haritayı göster
Temel veriler
- Makine üreticisi:
- MÜLLER-MITTELTAL
- Durumu:
- yeni
Fiyat ve Konum
sabit fiyat KDV hariç
€46.900
(€55.811 brüt)
- Konum:
- Eichenstich 12, 21272 Egestorf, DE

Ara
Teknik detaylar
- Azami yük ağırlığı:
- 23.700 kg
- Toplam ağırlık:
- 30.000 kg
- Dingil konfigürasyonu:
- 3 dingil
Teklif detayları
- Listeleme kimliği:
- A104-33-108
- Referans no.:
- 59021
- Son güncelleme tarihi:
- 25.06.2025
Açıklama
* T3 Profi 30.0:
* Wabco EBS-E (electronic braking system)
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Air suspension with manual lowering at rear
* Pressure gauge for axle load determination (separate display for both air suspension circuits)
* Side underrun protection
* Rear swing-out supports on chassis frame
* Mechanically adjustable warning sign packages, front and rear
* Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, both with spray protection
Bodpfel Tpwysx Afwedi
* Reflective contour marking tape on sides and rear
* Hinged (hot-dip galvanized) lid for toolbox on the turntable platform
* LED tail lights
* Removable warning beacon at the rear
* Drawbar with 40 mm draw eye and adjustable height via tension spring & turnbuckle
* 2 x 7-pin electrical connectors
* Four stake pockets on each side, each with 2 t lashing point
* Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on main frame of the turntable platform, 5 pairs of UVV (Accident Prevention Regulation) lashing rings, tiltable and lowerable, loadable in all directions and recessed into the outer frame - 13.4 t in corner positions, otherwise 10 t
* 6 pairs of mechanical folding outriggers for 3 m total width (not present on rear beveled section)
* Widening boards stored in the center of the loading area
* Hydraulic one-piece ramps (approx. 3,000 x 720 mm), adjustable in width
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen loading height: approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height: approx. 910 mm (incl. 860 mm approach ramp)
* Chassis, turntable, drawbar, folding extensions & ramps hot-dip galvanized
* Axles, turntable, air tanks etc. painted in black
* Tyres: 235/75 R 17.5
* Payload approx. 24,000 kg at 30,000 kg gross vehicle weight
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Immediately available ex Egestorf
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
* Wabco EBS-E (electronic braking system)
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Air suspension with manual lowering at rear
* Pressure gauge for axle load determination (separate display for both air suspension circuits)
* Side underrun protection
* Rear swing-out supports on chassis frame
* Mechanically adjustable warning sign packages, front and rear
* Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, both with spray protection
Bodpfel Tpwysx Afwedi
* Reflective contour marking tape on sides and rear
* Hinged (hot-dip galvanized) lid for toolbox on the turntable platform
* LED tail lights
* Removable warning beacon at the rear
* Drawbar with 40 mm draw eye and adjustable height via tension spring & turnbuckle
* 2 x 7-pin electrical connectors
* Four stake pockets on each side, each with 2 t lashing point
* Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on main frame of the turntable platform, 5 pairs of UVV (Accident Prevention Regulation) lashing rings, tiltable and lowerable, loadable in all directions and recessed into the outer frame - 13.4 t in corner positions, otherwise 10 t
* 6 pairs of mechanical folding outriggers for 3 m total width (not present on rear beveled section)
* Widening boards stored in the center of the loading area
* Hydraulic one-piece ramps (approx. 3,000 x 720 mm), adjustable in width
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen loading height: approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height: approx. 910 mm (incl. 860 mm approach ramp)
* Chassis, turntable, drawbar, folding extensions & ramps hot-dip galvanized
* Axles, turntable, air tanks etc. painted in black
* Tyres: 235/75 R 17.5
* Payload approx. 24,000 kg at 30,000 kg gross vehicle weight
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Immediately available ex Egestorf
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2001
İstek gönder
Telefon & Faks
+49 40 33... ilanlar
Bu ilanlar da ilginizi çekebilir.
İlanınız başarıyla silindi
Bir hata oluştu





































