Römork

MÜLLER-MITTELTAL 3-achs Plateu Anhänger, mit 3 Kabelböcken

Durumu: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum stands ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering system ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck display via EBS signal – no truck-side installation required * 15-pin electrical connector * 2 additional LED reversing lights (controlled via reverse gear) * LED lighting ----General Attachments: * Aluminum air reservoir * Side-mounted stainless steel toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed Structure: * Zurr-fix outer frame, 45° bent with hole pattern for lashing means; lashing capacity per lashing point 2,000 kg with a spacing of 480 mm * Option to install 3,000 kg drop-down lashing brackets at approx. 600 mm intervals – delivery includes 12 pcs. 3,000 kg lashing brackets per side * 5 pockets per side in the outer frame for stakes 100 x 50 mm – stakes are not included in the delivery * 30 mm phenolic plywood floor ----Cable Drum Stands: * 3 galvanized cable drum stands secured by container locks, with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross connection * 6,000 kg drum weight per drum stand * Without drive and drum brake * Support arm with clamping lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 2 locating rings * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for customer-side securing of drums against rotation and unwinding ----Loading Height: * Loaded approx. 1,040 mm ----Paintwork: * Chassis, bogie, drawbar, outer frame, underrun protection hot-dip galvanized * Axles painted in a black tone Lhsdpfx Afsx Nli Ns Dod ----Information: * Technical upgrade to 30 t gross vehicle weight possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 28 / 2026

Durumu: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lower facility ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring with display capability in the truck dashboard via EBS signal -no truck-side installation required- * 15-pin power connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting ----General Attachments: * Aluminium air tank * Side-mounted stainless steel toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Underrun protection ----Platform: * Zurr-fix outer frame, 45° angled with hole pattern for lashings, lashing capacity per point 2,000 kg at a distance of 480 mm * Option for installation of 3,000 kg drop lashing rings at intervals of approx. 600 mm - delivery includes 12 each side, 3,000 kg lashing rings- * 5 pockets each side for stake posts 100 x 50 mm in the outer frame - stake posts are not included in delivery- * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanized drum brackets, secured via container locks, with side forklift pockets, center/center 800 mm (width of pockets 185 mm) * Max. drum diameter 2,600 mm, max. drum width 1,650 mm * Internal width between support arms approx. 1,775 mm, with cross brace * Max. drum weight per support 6,000 kg * Without drive and drum brake * Support arm with locking device for securing drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 locating rings * 2 centering cones made of polyamide * 4 x 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading Height: * Approx. 1,040 mm loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, underrun protection hot-dip galvanized * Axles painted in black shade ----Information: * Technical GVW upgrade to 30 t possible * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available from week 28/2026 Ledpfx Ajx Nlkgef Dohd