Çalışma platformlu römork

MÜLLER-MITTELTAL 3-achs Plateu Anhänger, mit 3 Kabelböcken

Durumu: yeni, azami yük ağırlığı: 18.000 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drums racks ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with raise/lower device ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring with display capability in the truck display via EBS signal - no truck-side installation required * 15-pin power connector * 2 additional LED reversing lights (controlled via reverse gear) * LED lighting ----General Attachments: * Aluminium air tank * Stainless steel toolbox, side-mounted, approx. 1,000 x 300 x 600 mm Lsdsx Nlkgopfx Aggjak * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix external frame, 45° bent with hole pattern for tie-down equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing * Installation of 3,000 kg drop lashing brackets at approx. 600 mm spacing possible – delivery includes 12 pcs. 3,000 kg lashing brackets per side * Each side with 5 pockets for pipe stanchions (100 x 50 mm) in the outer frame – stanchions not included in delivery * 30 mm phenolic plywood floor ----Cable Drum Racks: * 3 pcs. galvanized cable drum racks, secured by container locks, with side forklift pockets (centre/centre 800 mm, pocket width 185 mm) * Maximum drum diameter 2,600 mm, maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross brace * Each cable drum rack rated for 6,000 kg drum weight * Without drive and drum brake * Support arm with clamping lock to secure drum shaft * Steel drum shaft, 76 mm diameter, with centring and rotating ends * 2 clamping rings * 2 centring cones made from polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading Height: * Loaded approx. 1,040 mm ----Paintwork: * Chassis, turntable bogie, drawbar, outer frame, underrun protection hot-dip galvanized * Axles painted in black tone ----Information: * Technical gross weight upgradeable to 30 t * New vehicle with manufacturer warranty * Errors and prior sale reserved * Immediately available ex works Egestorf

Durumu: yeni, azami yük ağırlığı: 18.000 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable reels ----Braking system: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 ton Gigant axles ----Suspension: * 17.5" air suspension with lift and lower system ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck dashboard via EBS signal (no installation required on the truck side) * 15-pin power connector * 2 additional LED reversing lights (activated when in reverse gear) * LED lighting ----General attachments: * Aluminum air reservoir * Side-mounted stainless steel toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Loading platform: * Zurr-fix outer frame, 45° bended with hole pattern for lashing equipment, lashing force per lashing point 2,000 kg at an interval of 480 mm * Optional installation of 3,000 kg drop lashing eyes at intervals of approx. 600 mm (delivery includes 12 pieces, 3,000 kg lashing eyes per side) * 5 pockets per side for posts 100 x 50 mm in the outer frame (posts are not included in delivery) * 30 mm phenolic plywood flooring Lajdpfx Agex Nlkaogek ----Drum stands: * 3 galvanized drum stands, secured via container locks with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross connection * Max. drum weight per cable stand 6,000 kg * Without drive and drum brake * Support arm with adjustable lock for securing drum shaft * Steel drum shaft, 76 mm diameter with centering and rotating ends * 2 clamping rings * 2 centering cones made of polyamide * 4 pieces 3.2 ton lashing eyes on support arms for customer-side securing of drums against rotation and unspooling ----Loading height: * Approx. 1,040 mm loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, underrun protection hot-dip galvanized * Axles painted black ----Information: * Upgrading to 30 ton GVW technically possible * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf