Alçak şasi römork

FLIEGL DTL 300 3-Achs Tieflader Agrar Greenl. Hydraulik

Gross vehicle weight: 24,000kg / 30,000kg
Unladen weight: 5,600kg
Payload: 18,400kg / 24,400kg
Overall length: 10,290mm
Loading length: 5,900mm incl. rear taper
Width: 2,520mm
Loading height: 860mm
Further information: plus pre-carriage / provision from stock at 26639 Wiesmoor, €1,280.00 / net

Low-bed trailer chassis
Steel welded construction
Turntable with heavy-duty ball race
Foldable rear support
2 wheel chocks with holders
Full-width rear mudflap (not with forklift mounting)
1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable
Prepared for widening to 3,000 mm (holes in outer frame with cover, not in rear taper)
Lashing points low-loader:
1 pair tiedown recesses in the longitudinal beam, front, recessed in the cranking, each 10t
7 pairs of lashing mushroom points, fitted on top and side of the outer frame, each 10t:
1x front on cranking
5x in the lowered bed
1x in rear taper
12 pairs of lashing holes in the outer frame, each 5t (for ratchet strap hooks):
5x cranking, 6x lowered bed, 1x rear taper
Drawbar arrangement for turntable trailer:
Drawbar with certified 40mm towing eye
Drawbar height adjustable via spring
Axles and suspension:
Drum brake axles, manufacturer’s choice
Laser-aligned axle/chassis: reduces tyre wear and fuel consumption
Parabolic suspension with maintenance-free steel/rubber bushings and mechanical axle load equalisation (rocker compensator)
Wheels and tyres:
235/75 R17.5” (manufacturer’s choice)
Steel twin rims, factory silver
Braking system:
2-line air brake system
Spring-loaded parking brake
2 fail-safe coupling heads at front, with connecting lines to the truck, connecting lines approx. 60cm extended
without ABS, with mechanical ALB, thus max. 60 km/h approval
Electrics:
12 volt, multi-chamber lights, without side yellow LED lighting, with side reflectors
2 white position lights front
2 white/red contour marker lights rear
1x 7-pin 12V plug at front, with connecting cable, approx. 60cm extended
1 LED beacon with bracket, controlled via sidelight (removable)
2 pairs of illuminated warning boards, extendable to 3,000mm
Floor:
Front cranking with steel/chequer plate covering
Storage box recessed in the transition to cranking
Then approx. 70mm softwood floor, over wheel arches with steel/chequer plate covering
Rear taper with 70mm softwood floor
Low-bed area incl. rear taper 5900mm
Access ramps:
Steel ramps approx. 3000mm long, 750mm wide, laterally adjustable
Wooden planked (tip area with steel/chequer plate)
Hydraulic via tractor auxiliary drive with throttle, operated on LH side
Nlsdpfjynvrwjx Abreh
Hydraulic connection with SVK plug NW 10/3, including hose
Operating instructions:
With 10,000kg axle load, special permit required; only indivisible load possible!
The stated gross vehicle weight is technically feasible; depending on the load, the GVW may not be achievable due to permitted axle/support/saddle loads. (Poor driving and tracking behaviour may result from incorrect load distribution)
Country of registration / Plates:
Country of registration: Germany
With Dekra approval and certificate, for max. 60 km/h registration, towing vehicle LoF
(Registration in Switzerland max. 40 km/h possible)
Prepared for two-line registration plate holder
Without contour markings / reflective strips according to ECE R 048
Paint finish:
Frame hot-dip galvanised incl. passivation
“15-year warranty against thr

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.