Alçak şasi römork

SCHWARZMÜLLER Tieflader mit gekröpftem Plateau

Durumu: yeni, azami yük ağırlığı: 23.800 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, Weights PP004045B Permissible total weight: 24 t Technical total weight: 30 t Dimensions PP004048B Approx. 2,100 mm = raised front platform including gooseneck frame, corners chamfered Approx. 5,350 mm = lowbed platform – flat loading area Approx. 850 mm = rear ramp incline PP004047B Overall width approx. 2,550 mm (or approx. 3,000 mm with extensions) PP004046B Loaded platform height approx. 870 mm PP002560B When assembling as a tractor-trailer combination, please ensure compliance with legally permitted overall height and total length! Frame PP004054B Steel welded construction with front gooseneck and rear chamfer, ramp incline with excavator bucket recess in the center = rear depression between longitudinal beams, approx. 2,300 mm Integrated outer frame: 5 pairs of approx. 4 t lashing loops (4x in the lowbed, 1x at the raised platform) 7 pairs of recessed, retractable approx. 10 t lashing rings (4x in the lowbed, 1x in the ramp incline, 2x at the raised platform) PP001519B Standard ball race turntable Frame attachments PP004068B Both sides of the lowbed platform with extendable wideners including approx. 50 mm softwood planks (track width of transported construction machinery must not exceed outer frame width of approx. 2,550 mm) PP006218B 4 pairs of foldable approx. 10 t lashing rings, arranged as follows: 1 pair at the front on the raised platform, inside the longitudinal beams 1 pair at the very rear in the excavator bucket recess, left and right 1 pair in front on the raised platform before the gooseneck, within the longitudinal beams 1 pair in the lowbed at the rear, before the ramp incline, in the bucket recess left & right Drawbar PP004065B Fixed drawbar with swiveling towing eye approx. 40 + 50 mm, gooseneck design, silent bushing mounting, drawbar holding spring with tensioner CALC Truck coupling height approx. 830 mm to approx. 1,030 mm PP004059B Drawbar length approx. 1,800 mm Support device PP004057B 2 pieces of automatic folding rear supports Axles PP004114B SAF air-suspension low loader axles with drum brakes, load capacity 11 t/axle, S-cam brakes approx. 300/200 mm, automatic brake adjusters Wheels PP000245B 12 tires 235/75 R 17.5, 141J, brand as per factory choice Brake system/Suspension PP004056B Brake system according to ECE Directive R13, dual-circuit air brake system Brake system brand Wabco, EBS system 4S3M, 1st + 2nd axle equipped with sensors PP000050B RSS/RSP - stability program PP001532B Spring-type parking brake on 2nd + 3rd axle PP001536B Brake/air connection lines with 2 single-coupling heads (yellow/red) EBS/ABS connection cable PP004111B Air suspension with lifting and lowering function (for rear axles only), automatic ride height adjustment above 15 km/h (RTR), with axle stop on front axle Assistance/safety systems PP008965B SWIT - Schwarzmüller Intelligent Telematics PP004276B Axle load display via EBS CAN bus signal for display in truck cab (truck must be factory prepared accordingly, not a calibrated scale) PP008889B Tire pressure monitoring according to ECE Directive 141, with pressure sensor in the wheels, for display in the truck cab (display etc. must be present in tractor unit) Floor PP007568B Approx. 50 mm impregnated softwood flooring, projecting approx. 5–10 mm above upper frame edge, steel chequer plate cover over the wheels Ramps PP007134B 2 foldable one-piece lightweight steel loading ramps Gedoy Aug Repfx Abzoir