Alçak yükleyici

Fliegl VTS S Parab/Feder

Further Information

Chassis Low-bed Trailer
Steel welded construction
Turntable with heavy-duty slewing ring
Foldable rear supports
2 wheel chocks with holders
Aluminum side underrun protection
Full-width rear mudflap
Half-shell mudguards for 1st and 2nd axles with anti-spray mudflaps behind each axle; anti-spray mudflaps in front of and behind the 3rd and 4th axles
Digger arm recess above the rear axles, extending to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep; 2 pairs of lashing holes (5 t each) in the digger arm recess, laterally on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear incline
1 plastic toolbox with shelf insert, W=620/H=360/D=440 mm, lockable with a padlock (padlock not included)
1 storage box recessed into neck section in the floor, with lid, W=720 mm / L=520 mm / D=170 mm
Extendable widenings to 3,000 mm
70 mm wooden planks for widening to 3,000 mm
Storage compartment for wooden planks under the loading area
Low-bed trailer lashing points (40 lashing options)
1 pair of 5 t lashing eyes on gooseneck
9 pairs of 10 t lashing pins, recessed into the top and side of the external frame
2 x on the front gooseneck
7 x in the low-bed area
6 pairs of 5 t lashing holes in the external frame of the low-bed (for hook-in tie-down straps)
3 additional pairs of foldable lashing eyes, each 10 t
1 x inside next to the main frame at the start of the low-bed
1 x on the gooseneck (overhanging)
1 x recessed in the floor behind the last axle
Trailer drawbar
Towing bar with tested 50 mm towing eye, 8° inclined towing eye, D-value at least 160 kN
Axles & Suspension
Drum brake axles
Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization front and rear (rocker compensation)
Wheels and tyres
235 / 75 R 17.5
Manufacturer’s choice
Steel rims, twin wheel configuration, factory silver
Brake system
2-line compressed air brake system
Spring-loaded parking brake
2 non-interchangeable coupling heads at the front, with connection lines to towing vehicle
ABS and ALB, with ABS socket at the front, with connecting cable
Electrics
24 Volt, multi-chamber lights, side yellow LED lighting
2 white position lights at the front
2 white/red tracking lights at the rear
2 x 7-pin non-interchangeable plugs at the front, with connecting cable
1 LED beacon with holder, operated via parking lights (removable beacon)
2 pairs of double warning boards, LED illuminated and extendable to 3,000 mm
Floor
Front gooseneck section with steel/chequer plate covering
Proceeding with 70 mm softwood flooring, steel/chequer plate covering in the wheel arch area
Rear incline with 70 mm softwood flooring
Loading ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Wood-covered
With spring lift assistance
Registration/country plates
Country of registration: Germany
24/7-Service Hotline
Bedpfx Asi Ri A Soh Hsdi
Prepared for two-line license plate holder
Conspicuity markings with reflective strips according to ECE R 048, side white and rear red
Warning panel according to ECE - 70
Paintwork
Frame hot-dip galvanized incl. passivation—15-year corrosion warranty
Towing bar galvanized or black, at manufacturer’s option
Ramps hot-dip galvanized
Note: These are archive photos!

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.