Alçak şasi römork

Stema Ateo 2 Autotransportanhänger

Durum: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: Ibodpfeq Euakjx Aktoc * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting on the first axle, activated via EBS (no truck-side installation required) * Rearmost axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function, including ride height control valve ----Electrics / Lighting: * Smart-Board mounted as infotool on trailer with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12/24 V * Removable LED rotating beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel wheel arches * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swivel arm as carrier for connection cables from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with front edges chamfered at 45°, front toolbox made of galvanised, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminium drop sides on the platform (in RAL colour of choice), fold-down and removable * Rear board plugged in, 150 mm high * Rear chamfer at the platform leading to the lowbed, approx. 700 mm long with checker plate covering and a perforated strip at the end for hooking in aluminium approach ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over axles * 9 mechanical folding widenings to 3 m total width (excluding rear chamfer), widening planks included, with lockable transverse storage compartment under the loading area * 3 storage compartments under the platform for optional aluminium approach ramps or wooden planks for wheel well covering ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum spacing 480 mm) * Each side equipped with 3 sunken 13.4 t lashing rings in the floor (1 on the platform, 1 on the longitudinal beams after the gooseneck, 1 above the middle axle next to the longitudinal beam) Low Loader Platform: * Each side equipped with 3 x 13.4 t lashing rings on the outer frame (1 at start of gooseneck, 1 at start of drive-on chamfer, 1 at end of drive-on chamfer) * Each side with 2 x 10 t lashing rings (1 between front wheel well and 1st axle, 1 between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frames of the wheel wells (2 at the front and 1 at the rear wheel well) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle across the steering axle to rear crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * Each side with 2 x 6.4 t lashing rings